GPU subsystem in sdm630 is supplied by either LDO300(VDD_GFX)
in LDO mode or VDD_CX in BHS mode. This LDO300 is CPR managed
and supports CPR closed-loop operation.
CRs-Fixed: 2000929
Change-Id: I94d6739f9abbdba3918b118eaa29fc0bc5cbd6e7
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Add the sdm630 compatible string to MDSS PLL driver
of_device_id table list, so that initialization of
MDSS PLL driver takes place for sdm630 platform.
Change-Id: I284ff9c07a4a971260ade399a2f7a605003ccf1d
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
sdm630 CPU CPR controllers support full hardware closed-loop CPR
operation also known as CPR hardening. Extend the cprh-kbss-regulator
driver to handle CPU subsystem specific power requirements of
the sdm630 chip.
CRs-Fixed: 1117353
Change-Id: Id2aa0674b0d9737907defd4b305ee70b74f65142
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
While initializing the SMMU with DOMAIN_ATTR_ATOMIC attribute
iommu driver always vote for aggre2_noc_clk during suspend mode
which result into power penalty. To resolve this issue avoid
configuring DOMAIN_ATTR_ATOMIC attribute in S1_BYPASS mode.
CRs-fixed: 2004562
Change-Id: Ic5d4b2864f58098fd29da48e5f977434e356b1e0
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
Implement common driver to limit Cx ipeak based on
voting from various clients in multimedia.
Change-Id: Ie0a57e49f7a8ba8a4fa3aa7f50dd0947f8e9d11b
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Add a device tree property qcom,connector-temp-max-mdegc to configure
the connector temperature at which mitigation should start.
This will set the thresholds for when the temperature-change IRQ will
fire.
Change-Id: I47df477b56a6654fbf94b5bb0f7dfdfb80e2f16e
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The charger temperature threshold should be configured for thermal
balancing. Add a device tree property to configure the temperature
threshold. A default value will be used in the absence of this property.
Change-Id: I5d64a8012a9c13c578714d91f1e7e4426cef235a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Rotator and MDP share same Vbif. Made changes to apply vbif
remapper settings for respective rotator xin id.
Also, due to common vbif, register mutex lock is now shared.
Change-Id: Ifdfb36ce5c8f26196ab4f8f56487cf135bbd12ce
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Add a device tree property to allow specifying the supported
set of sink capabilities. If not specified, fall back to a
single capability of 5V @ 3A.
Change-Id: I394061d9f3070099e35b651ce4b63a7993343bf1
Signed-off-by: Jack Pham <jackp@codeaurora.org>
The LDO300 regulator supplies power to GPU subsystem of sdm630.
Update GFX LDO regulator driver to support LDO300 regulation on
sdm630.
CRs-Fixed: 2000929
Change-Id: I7ae9834f47763e06e110c03c4cf4220fe044659e
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
For SDM660 and MSM8998 even though the DP controller version is
the same, there is a difference in the maximum pixel clock
frequency supported between these targets. Add support to parse
this property from the MDSS Display Port dtsi node as an optional
property.
Change-Id: I568ac44e41c7bf34f4b87b3199cdecad54e166c3
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Add 'const' to the type of a struct of_device_id variable.
- Remove unnecessary out-of-memory error messages.
- Restructure conditionals to avoid else after return.
- Replace kzalloc() with kcalloc() for arrays.
- Replace strncmp() with strcmp().
- Join strings that are wrapped across two lines.
- Correct the format of block comments.
- Remove 'return' from the end of void functions.
- Remove unnecessary parentheses.
- Remove unnecessary line continuations.
- Call usleep_range() with max > min.
- Update the LEDS_QPNP Kconfig entry and the device tree
documentation to use the name: 'Qualcomm Technologies, Inc.'
- Expand the description of the LEDS_QPNP config option.
- Correct the spelling of 'controlled'.
Change-Id: Id29de0da18aa1ce75a0c7604b8c0ecd1633fcaf3
Signed-off-by: David Collins <collinsd@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Add 'const' to the type of a struct of_device_id variable.
- Update the QPNP_COINCELL Kconfig entry and the device tree
documentation to use the name: 'Qualcomm Technologies, Inc.'
Change-Id: Ieb737138dc5dacb01eb840a1861afe14cf14ddc6
Signed-off-by: David Collins <collinsd@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Add 'const' to type of a struct of_device_id variable.
- Update the THERMAL_QPNP Kconfig entry and the device tree
documentation to use the name: 'Qualcomm Technologies, Inc.'
Change-Id: Ia25eb58820107d0c068ee3e2c31d46f0cb13e3d6
Signed-off-by: David Collins <collinsd@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Use octal file permissions instead of symbolic.
- Add 'const' to type of struct of_device_id variables.
- Remove unnecessary out-of-memory error messages.
- Change variables of type 'unsigned' to 'unsigned int'.
- Restructure conditionals to avoid else after return/break.
- Remove 'return' from the end of void functions.
- Join strings that are wrapped across two lines.
- Remove ';' from the end of a macro definition.
- Update the REGULATOR_QPNP Kconfig entry and the device tree
documentation to use the name: 'Qualcomm Technologies, Inc.'
Change-Id: I9f2cde58929ae57667366bb886e65154d36dfd3d
Signed-off-by: David Collins <collinsd@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Add 'const' to the type of a struct of_device_id variable.
- Remove unnecessary out-of-memory error messages.
- Change variables of type 'unsigned' to 'unsigned int'.
- Restructure conditionals to avoid else after return.
- Correct the spelling of the word 'initialize'.
- Update the REGULATOR_MEM_ACC Kconfig entry and the device
tree documentation to use the name: 'Qualcomm Technologies,
Inc.'
Change-Id: Idfccd4289eadbbeaf2c682ca4fbe73eda691499a
Signed-off-by: David Collins <collinsd@codeaurora.org>
When SOC masking algorithm is enabled, a SOC of 100 will be shown
to the user when certain conditions are met. When the device
starts discharging after charge termination, auto recharge will
be triggered once the SOC or Vbatt goes below the threshold. When
the recharge is based on Vbatt, a fluctutation in Vbatt can cause
issues in SOC masking algorithm. To make it robust, adjust the
recharge voltage dynamically based on charging status and battery
SOC.
Add a device tree property to allow configuring auto recharge to
be based off SOC or battery voltage. This will help the user to
select auto recharge configuration easily.
Change-Id: I2d749806aa51b9fa747967b592b6622cc12bee65
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
After charge termination, charging status might not get updated
until the recharge begins. This makes charge_full_update to be
not called at all thereby causing SOC masking algorithm to not
clear the charge_full flag. Use delta battery SOC interrupt to
help with this. Keep it disabled by default and enable it after
the charge termination. Disable it again when the user removes
the charger.
Since this needs delta battery SOC threshold to be configured,
add support for it.
Change-Id: Ic1a9f8a065c87efe88e315f2b2e1e1378151531b
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
XHCI allows interrupt moderation using imod_interval at 250ns
increments. Add DT parameter to specify this imod_value for
targets mainly with single CPU to reduce CPU interrupt loads.
This allows better balance between CPU usage and performance.
CRs-fixed: 1019219
Change-Id: Id479c162da6492caff4dd83de4054fee63b6abc5
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Add support for CX junction temperature monitor and thermal client
vote to CXIP LM hardware in KTM. When all pre-defined clients on
CX rail including thermal client set their vote, CXIP LM hardware
throttles pre-defined client on the same rail. During boot up,
KTM will set a pre-defined bypass clients bits of CXIP LM hardware
and monitors pre-defined tsens for preset threshold. Once it triggers,
it will vote for CXIP LM and clears vote when preset clear threshold
is reached. KTM enables this feature only if devicetree entry
'qcom,cxip-lm-enable' is configured with a non zero value.
If value is zero, then it disable this hardware feature explicitly.
Change-Id: Ibd95a6657d6bbf62710de2a677cb1ed70c972523
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
As WSA881x registers fails to read sometimes on
sdm660 internal codec, use cache-always mode
to avoid speaker mute.
CRs-Fixed: 1117406
Change-Id: I9742af37c3e64efb46fc9b3cef616f685b7f01a8
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Remove all reference to the internal code name "msmtitanium" and
replace them with "MSM8953" which is the official name for the
SoC.
Change-Id: I1637b0270ddbe8283dd9b4ba07e8e263b0a5a944
Signed-off-by: David Collins <collinsd@codeaurora.org>
CPU clock frequencies are different for sdm630, so update
the bootup frequency for perf cluster for sdm630.
Change-Id: I9da19b0a09ec1c5c7960f9c2fadfe26a3b4c3015
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
I2S_PCM config as per SDM architecture is taken
care in LPAIF. It is not required to set any LPAIF
register to config I2s or PCM mode from Apps side.
Remove the code related to i2s_pcm config.
Change-Id: Ic8217b6dc178a7248979e7c2ca183286597112ad
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Clkdiv module provides a clock output on the PMIC with CXO as
the source. This clock can be routed through PMIC GPIOs. Add
a device driver to configure this clkdiv module.
CRs-Fixed: 1085200
Change-Id: I5e91a954bf5b6adbba8547b04361daf9788cca37
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
* quic/dev/msm-4.4-drm_kms:
drm/msm/sde: allow mmus to be optional during kms init
drm/msm/sde: check for null catalog in sde hw destroy
drm/msm: treat data bus dtsi property as optional
drm/msm/sde: add crtc clock & bandwidth capabilities
drm/msm/sde: parse csc type dtsi entry to select valid csc
drm/msm: fix copyright marking in "msm" drm driver
drm/msm: remove smmu coherent hardware table walk attrib
drm/msm/sde: add DMA2 and DMA3 pipe staging support
drm/msm/sde: add event for underruns
drm/msm/sde: fix check for frame event overflow
ARM: dts: msm: add ping pong split definitions for msm8996
ARM: dts: msm: add sde max bus bandwidth setting for msm8996
drm/msm/sde: add dynamic clock and bandwidth commit support
ARM: dts: msm: add sde bus scale settings for msm8996
drm/msm/sde: add bus bandwidth control for crtc
drm/msm/sde: add frame done callback event to crtc
drm/msm/sde: bypass crtc atomic begin/flush if disabled
drm/msm/sde: add debugfs entry for vbif
drm/msm/sde: add debugfs entry for danger and safe status
drm/msm/sde: enable ping pong split support
ARM: dts: msm: enable imgswap on sharp nt35597 dual panel
drm/msm/sde: remove catalog parsing limits
drm/msm/sde: update pixel extension uapi
drm/msm/sde: enable master physical encoder last
drm/msm/sde: reset ctl mixer config at end of use case
drm/msm: Support virtualization of color processing properties
drm/msm/sde: Move DSPP/SSPP color process hw programming to common location
drm/msm/sde: Add support for Memory Color in plane
drm/msm/sde: Add PA global adjustment properties to plane
drm/msm: implement smmu detach and guard freeing of client dev
drm/msm/sde: reset kickoff count atomically before irq enable
ARM: dts: msm: default sde clock rate to max for msm8996
drm/msm/sde: base scaler phase on decimated dimensions
drm/msm/sde: move sde hw init to hw_init callback
drm/msm/sde: check for missed irqs in command encoder
drm/msm: support probe deferral in msm_drv
drm/msm/sde: fix iounmap usage and init callflow
drm/msm/sde: fixup sde_kms shutdown sequence and naming
drm/msm/sde: fix cmd mode vblank irq control
drm/msm/sde: apply correct zpos range for sde clients
drm: Increase max number of DRM object properties
drm/msm/sde: add debug dump and panic facility
drm/msm/sde: match xlog features in evtlog
drm/msm/sde: add debugfs support for misr data
drm/msm/sde: Add device tree subnode parsing capability
drm/msm: create separate commit thread for each display
drm/msm/sde: Add backlight class support for sde drm driver
drm/msm/sde: add common sde debug folder
drm/msm/sde: route evtlog to sde trace log
drm/msm/sde: add systrace compatible trace macro
drm/msm/sde: separate plane/encoder/crtc functions into headers
drm/msm/sde: add default 10 bit csc matrix to source pipe
drm/msm/sde: add 10 bit csc for sde
drm/msm/sde: add qseedv3.x support for sde
drm/msm/sde: add 10-bit formats support
drm/msm/sde: print error only if catalog property is mandatory
drm/msm/sde: remove redundant vblank request in crtc
drm/msm/sde: add vblank reference counting to crtc
drm/msm/sde: handle pingpong blocks from virtual encoder
drm/msm/sde: add support for BGRX and XBGR formats in plane
drm/msm/sde: add multi-client and ref counting for core irq
drm/msm/sde: cache connector list in sde crtc
drm/msm/sde: remove display manager
drm/msm/sde: fix video encoder access in phy encoder
drm/msm/sde: add debugfs node for vsync and underrun status
drm/msm/sde: update vblank and underrun isr handling
drm/msm/sde: fix color component order
drm/msm/dsi-staging: fix issues related to deferral
drm/msm/sde: remove static allocation of mdp_top hw block
drm/msm: initialize local varibles in sde power module
drm/msm/sde: dual pipe use case support
drm/msm/sde: update crtc status debugfs node
ARM: dts: msm: add vbif OT and plane QoS/LUT for msm8996
drm/msm/sde: add clock control parsing to hardware catalog
drm/msm/sde: correct read out of bit offset array
drm/msm/sde: add plane QoS parsing to hardware catalog
drm/msm/sde: add vbif parsing to hardware catalog
drm/msm/sde: add writeback id parsing to hardware catalog
drm/msm/sde: update mixer op mode config bit fields correctly
drm/msm/sde: add sde error prefix for all errors
drm/msm: add capability property for crtc
drm/msm/sde: update ubwc and src split properties for sde
drm/msm/sde: correct to use sync vblank request for commit
drm/msm: execute pending vblank disable upon last close
drm/msm/sde: update crtc to use sde debug macros
drm/msm/sde: remove unused functions in sde crtc
drm/msm/sde: move sde_crtc declarations into sde_crtc header
drm/msm/sde: move sde_crtc away from legacy drm vblank apis
drm/msm: add error logging in msm_atomic
drm/msm/sde: move vbif functions to their own file
defconfig: enable backlight class driver for msm defconfig.
drm/msm/sde: additional event logging for fences
drm/msm/sde: assign relative mixer stages based on zpos
drm/msm/sde: remove redundant vblank request and notification
drm/msm/sde: fixup header markings
drm/msm: fix power handle APIs when clk are not present
drm/msm/sde: don't convert ktime to ns when waiting for fences
DOWNSTREAM: drm/msm/sde: enable sde client customizations
drm/msm: rename kernel module to msm_drm
drm/msm/sde: allow primary planes to be used with all crtcs
drm/msm/sde: limit primary plane count to number of crtcs
drm/msm: teardown all modes in lastclose handler
drm/msm/sde: update proper error message for rm failure
drm/sde: move hardware catalog to dtsi parser
drm/msm/sde: enable proper support for split flush
drm/msm/sde: add mode config mutex lock for connector search
drm/msm/sde: bypass wait for commit done if crtc is not enabled
drm/msm/sde: add proper mode config lock to plane QoS check
drm/msm/sde: correct crtc to use new plane state for update
drm/msm/sde: remove error message from optional settings
drm/msm/sde: remove unused traffic shaper from hw drivers
drm/msm: property read should return success for virtual crtc
drm/msm/sde: avoid programming same plane source address
drm/msm/sde: update plane dmesg logging to use sde macros
drm/msm/sde: update scaler property definition and type
drm/msm/sde: break out plane decimation to separate properties
drm/msm/sde: update register writes to use SDE logging macros
drm/msm/sde: update csc property definition and type
drm/msm: Modularize property install function of color processing
drm/msm: Add support for PA vLut feature
drm/msm: Expose Assertive display capability
drm/msm: Suspend/Resume support for color processing features
drm/msm: Add support for PCC in Crtc
drm/msm/sde: update catalog for post processing
drm/msm/sde: don't duplicate input fence pointer with state
drm/msm/sde: fix color component order for compressed formats
drm/msm/sde: add writeback ROI support for msmskunk
drm/msm/sde: add const alpha support for msmskunk
ARM: dts: msm: add max clock property for sde to msm8996
drm/msm/sde: add max clock property for sde
drm/msm: add support for custom event notification
drm/msm: Initial version post processing header
drm/msm: remove msm clock driver header files
drm/msm/dsi-staging: keep backlight api under LED config
drm/msm/sde: enable sde clocks during debugfs register read
drm/msm/sde: update pipes on dirty plane properties
drm/msm/sde: fix compilation issues in sde driver
drm/msm/sde: update encoder dmesg logging to use sde macros
drm/msm/sde: remove unused header dependency
drm/msm/sde: use const alpha for wb if pipe alpha not supported
drm/msm/sde: remove unused sde functions
drm/msm/sde: add mode change request to cdm resource update
drm/msm/sde: cleanup alpha calc and plane stage in crtc
ARM: dts: msm: send panel off command during pre off state
drm/msm/sde: remove unused writeback function stubs
drm/msm/sde: remove unused vblank control for writeback
drm/msm/sde: remove unused encoder function
drm/msm/sde: always clear topology name when removing rsvp
drm/msm/sde: reorganize top level interrupt handling code
drm/msm/sde: add OT support for source pipe and writeback
drm/msm/sde: add danger/safe/QoS support for source pipe
drm/msm/sde: improve debug log for blend setup
DOWNSTREAM: drm/msm/sde: optionally delay output fence signal
drm/msm/sde: determine output fence timing on create
drm/sde: use power handle api to vote for core clock
ARM: dts: msm: add clk rate and gdsc supply entry for msm8996
drm/msm: add power handle driver for msm
drm/msm/sde: add helper macro for performing ktime comparisons
drm/msm/sde: assign ctls based on capability requirements
drm/msm/sde: clean up crtc ctl tracking
drm/msm/sde: improve resource manager hw block lookup time
drm/msm: internal property updates should update cached value
drm/msm/sde: fix plane stage setup in sde crtc
ARM: dts: msm: add nt35597 panel definition for msm8996
drm/sde: remove warn on from sde encoder
drm/sde: allow base layer plane stagging
drm/msm: update plane, crtc and connector caps blob prop
drm/msm/sde: add api for determining current interface mode
drm/msm/sde: fix uninitialized return code in rm
drm/msm/sde: fix atomic check for crtc driver
drm/msm: validate framebuffer before accessing it
drm/msm: fix atomic mode check for sde plane
drm/msm: use drm helper API for atomic check
ARM: dts: msm: remove hdmi connector for msm8996
drm/msm/sde: enable dynamic hardware resource assignment
drm/msm/sde: dynamic hardware resource manager
drm/msm/sde: move crtc towards multi-encoder support
drm/msm/sde: list block interconnects as bitmasks
drm/msm/sde: add topology management properties
drivers/gpu/drm: disable drm fbdev emulation
drm/msm/sde: use common structure for phys encoder init
drm/msm/sde: list hardwired mixer connections
drm/msm: enable/disable sde during driver open and close
drm/dsi: turn off the wled backlight with panel power off
drm/dsi: fix dsi control power supply turn off sequence
drm/msm/sde: add support for dirty properties
drm/msm: allow flags to be set in property helpers
drm/msm/sde: trigger plane modeset on buffer pitch change
ARM: dts: msm: add SDE writeback display for msm8996
drm/msm/sde: enable writeback enumeration in display manager
drm/msm/sde: add virtual writeback device and connector
drm/msm/sde: add resource management for writeback and cdm
drm/msm/sde: add hardware driver support for chroma down module
drm/msm/sde: add hardware driver support for writeback interface
drm/msm/sde: add smmu domain selection logic to connector
drm/msm/sde: add function to return raw interrupt status
ARM: dts: msm: add SDE smmu node to msm8996
drm/msm/sde: Bypass unused interface during smmu init
drm/msm: add non-realtime and secure smmu domains
drm/msm: cache active displays within display manager
drm/msm/sde: add connector api for querying display info
drm/msm/sde: use msm_display_info for display information
drm/msm/sde: explicitly enumerate supported plane formats
drm/msm/sde: add retire fence support
drm/msm/dsi-staging: use sde connector for dsi
drm/msm/sde: add generic support for drm connectors
drm/msm/sde: add utility functions for kms info
drm/msm/sde: enable output_fence property
drm/msm/sde: add output fence utility functions
drm/msm/sde: support more formats including compression
drm/msm: subdriver hook to validate modified formats
drm/msm/sde: add drm fourcc modifier for qcom compressed format
drm/msm/sde: command mode panel encoder support
drm/msm/dsi-staging: turn gpio off if panel reset fails
drm/msm/sde: single kickoff to flush hardware
drm/msm/dsi-staging: add dsi cmd/vid mode to display info
drm/msm: add subdriver callback for single kickoff
drm/msm/sde: fix reading of the pingpong counters
drm/dsi-staging: update configurations for display related GPIOs
drm/msm/sde: add register name to logging
drm/msm/sde: add logmask area for top registers
drm/msm/sde: define sde specific macros for dmesg logging
drm/msm/sde: enable explicit input fences
drm/msm/sde: add support for crtc properties
drm/dsi-staging: reset drm/dsi data before reconfiguring
ARM: dts: msm: fix compilation errors for msm8996
ARM: dts: msm: add configurations for 1080p panel on msm8996
defconfig: enabled drm/kms driver in msm defconfig
drm/msm/dsi: remove unused tag from dsi API
drm/kms: remove compilation of hdcp_hdmi
ARM: dts: msm: update settings for dsi panels
drm/msm: disable mdp4 driver in drm kms
drm/msm: switch to qti KGSL driver
ARM: dts: msm: add configurations for 720p panel
ARM: dts: msm: add device tree for sde dsi device on msm8996
drm/dsi-staging: add support to get regulator data from device tree
drm/msm/sde: use sde plane csc cfg struct for user settings
drm/msm: add display manager to makefile
drm/msm: rename MSM drm platform driver's name into msm_drm
drm/msm/sde: avoid dereferencing scaler blob if null state
drm/msm: handle null blob property array
drm/msm: enable both dsi drivers together
drm: mipi: change header format to work with msm hardware
drm/dsi-staging: remove interrupt handling
drm/msm: move display manager out from dsi-staging
drm/msm/dsi-staging: fix dynamic fps and seamless updates
drm/msm/dsi-staging: support dynamic frame-rate and validation
drm/msm: defer drm driver probe if backlight isn't ready
drm/msm: common display interface for mdp driver
drm/msm/sde: init private kms pointer before modeset init
drm/msm/dsi-staging: add dsi panel driver
drm/msm/dsi-staging: add debugfs support for dsi driver
drm/msm/dsi-staging: add support for command mode panels
drm/msm/dsi-staging: dsi display tests
drm/msm/dsi-staging: add dsi drm interface
drm/msm/dsi-staging: add dsi display driver
drm/msm/sde: replace plane property/state handling with msm_prop
drm/msm: add generic property/state handling
drm/msm: use sde specific color format throughout
drm/msm: move dynamic fps and seamless updates
drm/msm: update wrapper macros for event logging
drm/msm/sde: init spinlock for lm_lock
drm/msm/sde: clean up debug output
drm/msm: add event log for profiling msm drm driver events
drm/msm/sde: pageflip fixes
drm/msm/sde: remove crtc full modeset based on plane changes
drm/msm/sde: add z-order and plane id to prints
drm/msm/sde: add wrappers for release fence API
drm/msm/sde: update max up/down scale
drm/msm/sde: add planes color fill/fence timeout
drm/msm/sde: updates to planes atomic_check
drm/msm/sde: add cache for released plane states
drm/msm/sde: input fence support for planes
drm/msm/sde: add debugfs for crtc
drm/msm/sde: don't overflow mixer cfg fields
drm/msm: enable seamless dynamic framerates
drm/msm/sde: remove plane decimation properties
drm/msm/sde: change csc matrix coeff in h/w driver to s15.16
drm/msm/sde: enable blending across all planes
drm/msm/sde: remove 'mdp' from sde file names
defconfig: msm: enable SYNC Driver
drm/msm/sde: add valid rotator writeback flag
drm/msm/sde: add properties for planes
msm: sde: sde plane properties user definitions
drm/msm/sde: consolidate SDE error logging on DRM standard calls
drm/msm/sde: set encoder role at display probe time
drm/msm/sde: add preliminary debugfs support
drm/msm/sde: add blending support for more use cases
drm/msm/sde: enable NV12 modetest for planes
drm/msm/sde: fixup mdp top split pipe control
drm/msm/sde: add support for vblank callback
drm/msm/dsi-staging: add dsi phy driver
drm/msm/dsi-staging: add clock and power utilities
drm/msm/dsi-staging: add dsi controller driver
drm/msm/sde: add resource manager to enable dual dsi
drm/msm/sde: adding implementation for mdp_top in hw driver
drm/msm/sde: sde hw interrupt handling
drm/msm/sde: simplify encoder display probe logic
drm/msm/sde: move sde encoder to new display interface
drm/msm/sde: programmable pre-fetch support for video encoders
drm/msm/sde: sde encoder virtualization
drm/msm/sde: add controller instance to INTF block in catalog
drm/msm/sde: add basic sde object enumeration
drm/msm: add smmu handler
drm/msm/sde: add driver for sde support
drm/msm/dsi-staging: add catalog for dsi driver
drm/msm/dsi-staging: add hardware driver for dsi controller
drm/msm/dsi-staging: add hardware driver for dsi phy
drm/msm/dsi-staging: add dsi definitions for new dsi driver
drm/msm: remove clock framework dependency
Change-Id: I20ec5183e730d1033f824f3b33f52d5b1578f740
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Host will set the Venus firmware in below modes
1. If the load of current video session exceeds
the venus capability, video driver sets power
save mode for that session.
2. If an usecase is recommended to run in power
save mode to get power benefits, video driver
configures the session in power save mode.
3. If any V4L2 client makes an explicit call to
configure the usecase in a certain perf mode,
video driver sets the same to venus firmware,
unless restricted by core capability.
CRs-Fixed: 1106972
Change-Id: Ib8be6c9af1508389edc9cb6444531c6e711b6a11
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
