The patch 6ae3a0876185: "ACER: Add support for accelerometer sensor"
from Jun 1, 2012, leads to the following Smatch warning:
drivers/platform/x86/acer-wmi.c:1886 acer_wmi_accel_destroy()
error: don't call input_free_device() after input_unregister_device()
drivers/platform/x86/acer-wmi.c
1883 static void acer_wmi_accel_destroy(void)
1884 {
1885 input_unregister_device(acer_wmi_accel_dev);
1886 input_free_device(acer_wmi_accel_dev);
1887 }
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: joeyli <jlee@suse.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are some new video switch keys that used by newer machines.
0xA0 - SDSP HDMI only
0xA1 - SDSP LCD + HDMI
0xA2 - SDSP CRT + HDMI
0xA3 - SDSP TV + HDMI
But in Linux, there is no suitable userspace application to handle this,
so, mapping them all to KEY_SWITCHVIDEOMODE.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The BIOS of these machines will try to enable/disable wifi/bt in
their own sqeuence. It won't read the enable/disable parameter
in WMI command, but just iterates the wifi/bt's status described below
1st. enable wifi, enable bt
2nd. disable wifi, enable bt
3rd. enable wifi, disable bt
4th. disable wifi, disable bt
That will totally mess up the rfkill status, since we will try to read
wifi and bt's status and reset it again while booting up.
To avoid this, these machines should set the wapf value to 4,
that will let software totally control the wifi/bt's status and
BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event
instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and
0x7e(bt disable) through WMI.
With this patch[1], it will handle the KEY_RFKILL event correctly and
will block/unblock wifi and bt together.
1. https://lkml.org/lkml/2012/5/21/75
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since ACPI devices ids were changed to use always upper-case letters, the ACPI
id of the extra keys (FNBT0000) was not maching the one defined in the driver
(FnBT0000), causing the extra keys not to work.
The patch replaces the driver id with the one reported by ACPI, fixing the
problem.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Classmate V4 laptop includes a new accelerometer that can't be handled by
previous driver. This patch adds a new driver to handle it.
[mjg: Fixed up the driver pm stuff]
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to the ASUS WMI spec., to enable resume on lid open should
use the device ID(0x00120032), but it doesn't work indeed.
After discussing with ASUS' BIOS engineer, they say wake on lid open
doesn't have a uniq device ID(0x00120032) in the BIOS. It shares the same
device ID with deep S3(0x00120031), and the deep S3(resume on lid open)
is disable by default.
Adding this option in asus wmi sysfs
/sys/devices/platform/<platform>/lid_resume
so that userspace apps can enable/disable this feature by themselves.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
BugLink: https://bugs.launchpad.net/bugs/1000146
Some h/w that can adjust screen brightness through ACPI functions, but
can't turn on/off the backlight power correctly. So, we list those h/w in
quirks and try to turn on/off the backlight power through WMI.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
> Chassis Information
> Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
> Type: Other
Type should be "Notebook", "Laptop", .. not "Other".
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On Samsung X360, the BIOS will set a flag (VDRV) if the generic
ACPI backlight device is used. This flag will definitively break
the backlight interface (even the vendor interface) untill next
reboot. It's why we should prevent video.ko from being used here
and we can't rely on a later call to acpi_video_unregister().
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of using directly acpi_video_unregister(), use
acpi_video_dmi_promote_vendor() (and make it call
acpi_video_unregister() if needed)
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of adding a big blacklist in video_detect.c to set
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR correctly, let external modules
promote or demote themselves when they know the generic video
module won't work.
Currently drivers where using acpi_video_unregister() directly
but:
- That didn't respect any acpi_backlight=[video|vendor] parameter
provided by the user.
- Any later call to acpi_video_register() would still re-load the
generic video module (and some gpu drivers are doing that).
This patch fix those two issues.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This device is present on Iconia Tab W500.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: joeyli <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2
(0x53545344) will be used as future DSTS ID. In addition, calling
asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns
ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes
no DSTS ID will be assigned in this case.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
greatest note is a speed up for parallel, non-allocating DIO writes,
since we no longer take the i_mutex lock in that case. For bug fixes,
we fix an incorrect overhead calculation which caused slightly
incorrect results for df(1) and statfs(2). We also fixed bugs in the
metadata checksum feature.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=VAVB
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The usual collection of bug fixes and optimizations. Perhaps of
greatest note is a speed up for parallel, non-allocating DIO writes,
since we no longer take the i_mutex lock in that case.
For bug fixes, we fix an incorrect overhead calculation which caused
slightly incorrect results for df(1) and statfs(2). We also fixed
bugs in the metadata checksum feature."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: undo ext4_calc_metadata_amount if we fail to claim space
ext4: don't let i_reserved_meta_blocks go negative
ext4: fix hole punch failure when depth is greater than 0
ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
ext4: weed out ext4_write_super
ext4: remove unnecessary superblock dirtying
ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super()
ext4: remove useless marking of superblock dirty
ext4: fix ext4 mismerge back in January
ext4: remove dynamic array size in ext4_chksum()
ext4: remove unused variable in ext4_update_super()
ext4: make quota as first class supported feature
ext4: don't take the i_mutex lock when doing DIO overwrites
ext4: add a new nolock flag in ext4_map_blocks
ext4: split ext4_file_write into buffered IO and direct IO
ext4: remove an unused statement in ext4_mb_get_buddy_page_lock()
ext4: fix out-of-date comments in extents.c
ext4: use s_csum_seed instead of i_csum_seed for xattr block
ext4: use proper csum calculation in ext4_rename
ext4: fix overhead calculation used by ext4_statfs()
...
Pull ARM updates from Russell King:
"First ARM push of this merge window, post me coming back from holiday.
This is what has been in linux-next for the last few weeks. Not much
to say which isn't described by the commit summaries."
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
ARM: 7463/1: topology: Update cpu_power according to DT information
ARM: 7462/1: topology: factorize the update of sibling masks
ARM: 7461/1: topology: Add arch_scale_freq_power function
ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
ARM: 7452/1: delay: allow timer-based delay implementation to be selected
ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
ARM: 7444/1: kernel: add arch-timer C3STOP feature
ARM: 7460/1: remove asm/locks.h
ARM: 7439/1: head.S: simplify initial page table mapping
ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
ARM: 7436/1: Do not map the vectors page as write-through on UP systems
...
John W. Linville says:
====================
These fixes are intended for the 3.6 stream.
Hauke Mehrtens provides a pair of bcma fixes, one to fix a build
regression on mips and another to correct a pair of missing iounmap
calls.
Thomas Huehn offers a mac80211_hwsim fix to avoid a possible
use-after-free bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The behavior of the SMC has changed several times over the years,
causing read failures in the driver. It seems the problem can be
explained by a shift in SMC speed combined with improper action on
status codes.
We should first wait for the SMC to settle, which was the most
frequent response on the old slow machines. Then, if the SMC is busy,
we need to try again later by resending the command. This was the most
likely response until 2012. Now, with a shorter wait time, we are
again most likely to poll while the SMC is settling, and as a result
we see high failure rates on many old and new models.
With the distinction between busy and failure, we can also wait longer
before retrying, without sacrificing speed. This seems to bring
failures down to virtually zero on all models.
Tested on: MBA1,1 MBA3,1 MBA5,1 MBA5,2 MBP9,2
Tested-by: Adam Somerville <adamsomerville@gmail.com>
Tested-by: Hubert Eichner <hubert.georg.eichner@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Restoring the configuration register on device removal has the side
effect of also resetting the hysteresis value. This is inconsistent as
the other limits are not reset, only hysteresis. So, following the
principle of least surprise, preserve the hysteresis value when
restoring the configuration register.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Define JC42_CFG_HYST_MASK as the mask _before_ shifting instead of
after shifting. This simplifies the current code slightly, and will
simplify the code to come even more.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit c5dec01822 (acpi_power_meter: Use struct
dev_pm_ops for power management) introduced the following build warning. It is
seen if CONFIG_PM_SLEEP is not defined.
acpi_power_meter.c:930:12: warning: acpi_power_meter_resume defined but not used
Fix it.
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
NFSd's boot_time represents grace period start point in time.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Passed network namespace replaced hard-coded init_net
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a cleanup patch - makes code looks simplier.
It replaces widely used rqstp->rq_xprt->xpt_net by introduced SVC_NET(rqstp).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch introduces moves nrhosts in per-net data.
It also adds kernel warning to nlm_shutdown_hosts_net() about remaining hosts
in specified network namespace context.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch moves next_gc to per-net data.
Note: passed network can be NULL (when Lockd kthread is exiting of Lockd
module is removing).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is required for per-network NLM shutdown and cleanup.
This patch passes init_net for a while.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.
The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.
This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.
If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.
This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.
This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5b3e7e6cb5.
The problem that the original commit was attempting to fix can
never happen in practice because validation is done one a per-flow
basis rather than a per-packet basis. Adding additional checks at
runtime is unnecessary and inconsistent with the rest of the code.
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 92101b3b2e (ipv4: Prepare for change of rt->rt_iif encoding.)
invalidated TCP early demux, because rx_dst_ifindex is not properly
initialized and checked.
Also remove the use of inet_iif(skb) in favor or skb->skb_iif
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI
flags are handled specially. Function dev_change_flags sets IFF_PROMISC and
IFF_ALLMULTI bits in dev->gflags according to the passed value but
do_setlink passes a result of rtnl_dev_combine_flags which takes those bits
from dev->flags.
This can be easily trigerred by doing:
tcpdump -i eth0 &
ip l s up eth0
ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with
IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set
IFF_PROMISC in gflags.
Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The problem is that we call this with a spin lock held. The call tree
is:
kaweth_start_xmit() holds kaweth->device_lock.
-> kaweth_async_set_rx_mode()
-> kaweth_control()
-> kaweth_internal_control_msg()
The kaweth_internal_control_msg() function is only called from
kaweth_control() which used GFP_ATOMIC for its allocations.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But
patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative
values. If a user assign -1 to it, the socket will set successfully and wait
for 4294967295 miliseconds. This patch add a negative value check to avoid
this issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
serial drivers. They were cherry-picked from the tty-next branch of the
tty git tree, as they are small and "obvious" fixes. The larger
changes, as mentioned before, will be saved for the 3.7-rc1 merge
window.
All of these changes have been in the linux-next releases for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlAS5OkACgkQMUfUDdst+ykYLgCfdCz1v64yvk21r8un9fa3JXYW
dIIAoNcIeLHsUOcmMSp0JN2oZkBNZOb7
=y7gx
-----END PGP SIGNATURE-----
Merge tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY/Serial patches from Greg Kroah-Hartman:
"Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
serial drivers. They were cherry-picked from the tty-next branch of
the tty git tree, as they are small and "obvious" fixes. The larger
changes, as mentioned before, will be saved for the 3.7-rc1 merge
window.
All of these changes have been in the linux-next releases for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix parity setting issue
pch_uart: Fix rx error interrupt setting issue
pch_uart: Fix missing break for 16 byte fifo
tty ldisc: Close/Reopen race prevention should check the proper flag
pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
vt: fix race in vt_waitactive()
serial/of-serial: Add LPC3220 standard UART compatible string
serial/8250: Add LPC3220 standard UART type
serial_core: Update buffer overrun statistics.
serial: samsung: Fixed wrong comparison for baudclk_rate
Pull final kmap_atomic cleanups from Cong Wang:
"This should be the final round of cleanup, as the definitions of enum
km_type finally get removed from the whole tree. The patches have
been in linux-next for a long time."
* 'kmap_atomic' of git://github.com/congwang/linux:
pipe: remove KM_USER0 from comments
vmalloc: remove KM_USER0 from comments
feature-removal-schedule.txt: remove kmap_atomic(page, km_type)
tile: remove km_type definitions
um: remove km_type definitions
asm-generic: remove km_type definitions
avr32: remove km_type definitions
frv: remove km_type definitions
powerpc: remove km_type definitions
arm: remove km_type definitions
highmem: remove the deprecated form of kmap_atomic
tile: remove usage of enum km_type
frv: remove the second parameter of kmap_atomic_primary()
jbd2: remove the second argument of kmap_atomic
Pull powerpc fixes from Benjamin Herrenschmidt:
"Here's a handful of powerpc patches, a couple of regression fixes for
problems introduced in the main batch in this merge window, a couple
of defconfig updates, and some trivials.
The radeonfb one is something that was long standing in SLES which I
forgot to pickup earlier."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/ftrace: Trace function graph entry before updating index
radeonfb: Add quirk for the graphics adapter in some JSxx
powerpc: Lack of firmware flash support is not an error
powerpc: Enable pseries hardware RNG and crypto modules
powerpc: Update g5_defconfig
powerpc/kvm/bookehv: Fix build regression
powerpc: Set stack limit properly in crit_transfer_to_handler
