Set properties of the esoc driver for MDM shutdown and reset
time intervals for msm8996 CV2X.
Change-Id: Ic86f6b441b369a3ea4845425930724d5e6fed149
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Convert the timeout and shutdown intervals to be read from
the device tree and set default values in case no option is
provided.
Change-Id: I90efb5910ddf1667db5cde79f46a4a94da1668ec
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Reject driver reinit request when WLAN FW is down as FW
is in a bad state and can't communicate with host driver.
CRs-Fixed: 2153375
Change-Id: Id16cbfc05984091d61b18c98f7397baa871f82b4
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Register ops to store the gtk rekey data from the wlan
utility(wpa_supplicant) and configure the GTK offload
during wow suspend.
If the wlan module in suspend state with wowlan mode
this feature adds support to prevent the device to wakeup
from sleep state on gtk rekey failure in wlan firmware.
CRs-Fixed: 2150959
Change-Id: I968acfe65bd082d37c855f89d4460a09c055ffd8
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Validate the userspace wlan control cmd data, info and length
before copy into wcnss driver buffer. Avoid unnecessary string
manipulation and use kernel defined format specifier to print
wlan MAC address.
CRs-Fixed: 2149331
Change-Id: Ib59fdcc0e6b84cdd73972dcb62b2c05e4741f5f7
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
With WARN_RATELIMIT lot of warning messages are
sometimes causing watchdog bite or spinlock lockup
(due to continuous logging). Thus change it to
pr_debug.
Change-Id: I2f0670bd20a39d289c105f9896e6fc509fb87de6
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
With USB Host pass through, touchscreen is available on gvm.
Change-Id: I129f2cc65e5d11a6d69e7afde13356a3bee98df6
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Current CCID daemon is supporting TPDU level exhanges for CCID
communication. Hence report same in dwFeatures field of CCID class
descriptor.
Change-Id: If66a54bd74c76ccb417b202b224de5c79e9dfa05
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
When loading wlan driver, driver will check if chip is initialized
by reading pci io FW_IND_INITIALIZED status. While timeout occurred
when wait for above status randomly in multi load-unload process.
Restore pci config space before enable device during resume pci link.
Change-Id: Ib10f739b2321c7cb0e71ad40db571075a56ae48a
Signed-off-by: Kai Liu <kaliu@codeaurora.org>
Cleanup ION cache maintenance code to properly validate the target of
userspace cache maintenance requests.
Change-Id: I55b8e3584c59634f95250bc7c0bce5d8d70e6a13
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Reject regsiter_driver request when WLAN FW is already down as
WLAN FW is in a bad state and can't communicate with host driver.
Change-Id: I57ba839101f5c0a361e74060b18b45f87c71634c
CRs-Fixed: 2151726
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Set freed pointers to NULL to avoid double free
in msm_compr_playback_open and msm_compr_playback_free
functions of compress driver.
CRs-Fixed: 2142216
Change-Id: Ifd011dd85dd9f610c7b69dd460f73d26e006cd66
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Check the validity of the pointer in user space that you intend to
access. access_ok function simply checks that the address is likely
in user space, not in the kernel.
Change-Id: I936f73a2c2029f9e7ca12cc8fc06d0698e6710c0
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Pop is observed during switch from playback in native mode
to voice call and vice-versa. This is resolved by mclk
reset to non-native mode before hph path powers up.
CRs-Fixed: 2117960
Change-Id: I53d5f985453895d34179610e3a414021eade7bcb
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add support to mount system & vendor partitions during early init
on msm8996.
Change-Id: I6b05edb8d17f192e1d8d9d5e1c0c33a3d1a7c441
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
When the thread processing blocked TA wakes up when listener
becames available, the listener may be unavailable again before
this thread grabs the global mutex, so make change to add a
while loop to check if listener available after wake up and hold
mutex.
Change-Id: Ib386faca7a44325142da1dc54e19a99f3173ec86
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
cmnlib_ion_handle is only used within qseecom_load_commonlib_image()
and is not a shared resource, so change it to a local variable and
avoid potential reuse or free by another thread in case of reentrancy.
Change-Id: I9e1f25cd024a19a7379b7409bdc6521bcd8bcae5
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Reset app_crash flag to make sure app entry is not freed when
there is another client still being blocked on the same app.
Change-Id: I25d236abc97e60fe8a4abbbc8c086291c764a9c1
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
The shader block size is in dwords. Make sure we copy out all the
bytes that we want.
Change-Id: I42364350ee6314b4830ed11cc06e61d854122543
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
Signed-off-by: Archana Obannagari <aobann@codeaurora.org>
Remove "qcom,mdss-dsi-on-command" and "mdss-dsi-off command"
commands for boot up performance optimization.
The two commands are for native DSI panels without a bridge
chip. However,AUTO platform has adv7533 bridge chip,which
is controlled by I2C instead of the above two commands.
In addition,the two command will cause extra wait for about
210ms in dsi_panel_tx_cmd_set() for dsi_display_enbale().
This make drmAtomicCommit() in libdrm a little slower,
so total boot time will be longer.
Change-Id: I1c95456b1734acb05cf2f38bb4c95441343bffab
Signed-off-by: Daocai <daocai@codeaurora.org>
When device in Low Power Mode, usb driver invokes
suspend and then disconnect upon cable disconnection.
Remove the ep_delay if it is set.
Change-Id: I203d57d70e8c189a2f3bc7f7830392fac98cfbb1
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
After firmware crashes, driver will try to recover the device by
resetting hardware and reloading firmware. Add a debug quirk option
to skip the recovery so that WLAN device can still remain the status
after crash for live debugging.
Change-Id: Ifff26df9ae5ab4c25573ca84e29eed73a79c6525
Signed-off-by: Yue Ma <yuem@codeaurora.org>
The kobject used for the process's sysfs node did not provide a
release function, so it did not correctly implement the refcounting.
Add a release callback so that we keep the process structure valid
as long as the kobject is alive.
Change-Id: I6db54092ed29ecd4d2f157188a4f1a5fc70f1edf
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
SMD_DTR_SIG and SMD_CTS_SIG signals are converted to TIOCM_DTR
and TIOCM_RTS respectively, for client notification. This is
incorrect conversion.
SMD_DTR_SIG and SMD_CTS_SIG signals conversion is modified to
TIOCM_DSR and TIOCM_CTS respectively.
CRs-Fixed: 2148119
Change-Id: I7cd61afe4639fc7c5fd993f4047fad3ff04c53a7
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
