Set the POWER_SUPPLY_PROP_PD_IN_HARD_RESET when hard reset
has been issued and clear it when completed. This replaces
the previous use of PD_ACTIVE which is now used to indicate
assertively whether the port partner is PD capable or not.
As such, since charger driver now definitively knows, it is
also not necessary to explicitly change PROP_TYPE to USB_PD.
Change-Id: I4d8c9fcdf553d1cf1ae79c66932773834804d1a9
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add additional properties for USB PD usage:
- POWER_SUPPLY_PROP_PD_IN_HARD_RESET is set when PD is
undergoing a hard reset
- POWER_SUPPLY_PROP_PD_CURRENT_MAX used to indicate the
current limit as negotiated over PD
- POWER_SUPPLY_PROP_PD_USB_SUSPEND_SUPPORTED is set when
USB suspend current limit must be honored when USB bus
is suspended
Also add enums to distinguish PD activity state: inactive, active.
Change-Id: I0a3d98ac1e1202e5b655b2e3a8102691b61359c8
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Charger may be able to detect a legacy cable connection in which
PD is not supported however the state machine still needs to
run in order to send the EXTCON_USB notification to start the
USB controller in peripheral mode (assuming type is SDP or CDP).
Move checking of PD_ALLOWED to the state machine which can be used
to determine if moving beyond PE_SNK_STARTUP is allowed or not.
The psy_changed() callback should only queue the work when either
typec_mode or pd_allowed states have changed. Also move handling
of the in_pr_swap flag to this function by absorbing the
disconnect callback and clearing the flag when CC state indicates
it is reconnected.
Change-Id: I8879699531a49915e7286e4a166944709076fbd1
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Support incoming VCONN Swap requests by accepting and turning
off/on VCONN.
Due to HW board limitations, if VCONN is being sourced from the
VBUS input we cannot support enabling VCONN while as a sink and
greater than 5V has been negotiated on VBUS. In that case, reject
the request. Add a device tree property that indicates whether
the board is configured for separate VCONN supply.
Change-Id: If3a9aa316ae08a80468631f3d536a1b345e21b18
Signed-off-by: Jack Pham <jackp@codeaurora.org>
With PM autosleep enabled, the system may aggressively enter
and re-enter suspend in between calls to queue_work() and
when the state machine function gets executed, which may
at best result in numerous suspend/resume cycles and at
worse starve the PD state machine from even executing.
Fix this by calling pm_stay_awake() whenever the work is
queued and relinquish with pm_relax() when no further work
is to be done.
Change-Id: I71d8ea0c69a7b174c2280f92d1f5342e5e50d9b0
Signed-off-by: Jack Pham <jackp@codeaurora.org>
VDMs, especially structured ones, are almost always handled
as requests and responses. Hence it does not make sense to
allow more than one outgoing VDM at a time, so get rid of the
vdm_tx_queue list and simplify it to a single-issued packet.
Because port partners can only have one VDM request/response in
flight, also handle the case when a new structured request is
received before the previous response has been sent. In that
case we simply discard the queued message as it's now invalid.
Change-Id: I144f8158dbf8be0babf5516b01d084fd053413c3
Signed-off-by: Jack Pham <jackp@codeaurora.org>
As UFP since the policy engine only responds to the Discover
Identity command, all other commands are unrecognized and
therefore should be NAKed. Fix the handling as follows:
- Ensure the standard Discover Identity was sent using
SID of 0xFF00, otherwise it is invalid
- Don't NAK incoming Attention messages
- When sending a NAK, respond with the same SVID of the
initiating command, whether it was correct or not
- Enter Mode is not supported in general, but the NAK
should also be sent back with the same mode index
- Re-issue Discover SVIDs when more than 12 SVIDs are returned
- Clean up macro name prefixes from 'VDM' to 'SVDM' to
emphasize they are accessing structured VDM specific bits
Change-Id: Id2590065a01e46f8da70733d55f3bfabff5b532d
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Fix several issues which help address PD compliance testing:
- Soft reset should be issued instead of hard reset in cases
where an unexpected message is received.
- In source mode, send a Reject if the Request PDO object also
exceeds the advertised current capability. Fix the incorrect
bitmask in the PD_RDO_FIXED_CURR macro.
- Handle possibility of quick back-to-back RX messages by
flushing the sm worker to ensure the last message was fully
processed before overwriting the buffer.
- Discard PING messages as they are not applicable to Type-C.
- Respond to GET_SINK_CAP while in source mode, and vice
versa, respond to GET_SOURCE_CAP when in sink mode.
- Move pd->hard_reset=false to PE_SRC/SNK_TRANSITION_TO_DEFAULT
for consistency.
- Change default sink capabilities to advertise only 5V @ 900mA
since the policy engine will not automatically request higher
voltages. If userspace wants to request greater than 5V it should
also update the sink capabilities.
- Reset the protocol counters at the beginning of PE_SNK_STARTUP.
Change-Id: I44598eb0b49efd763f86f303c70e8b018fca994b
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Avoid DAPM failure by ignoring the mbhc get impedance
errors as this is not a fatal and audio can still work
even if the class-H settings are not updated based on
impedance values.
Change-Id: Icd6846d157af5a96d5ae49261e109cbd5ab8c266
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Sometimes an interrupt from GPU is ignored while we
are still executing the previous interrupt. In order
to service any interrupt that was fired while executing
the interrupt handler, clear the interrupt register
immediately.
Also, clear the ADRENO_INT_RBBM_AHB_ERROR bit not before
but after it's serviced in its respective handler. This
will avoid firing the main interrupt handler a second
time.
CRs-Fixed: 1072781
Change-Id: Ie6b5a511f5b3077adae7d464de437f2aa893b0c9
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Create mixer control to select asrc (asynchronous sample rate
converter) output mode to integer or fractional rate based on
the playback sample rate of the main path or DSD path.
CRs-Fixed: 1078253
Change-Id: I941a357d63f1024c5f7648de10af10df0148c6a7
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
The ramdump driver uses the device pointer during ramdump read.
This change passes in the device pointer for smem during
ramdump create and moves the call to the probe function.
CRs-Fixed: 1075262
Change-Id: I6234e35d76440beb53c139ad0b02ec8b49c2a196
Signed-off-by: Chris Lew <clew@codeaurora.org>
The VMEM BW requirements for 720p120fps encode usecase push
the corner to SVS. Hence moving this usecase to Venus SVS
corner.
CRs-Fixed: 1073937
Change-Id: I2814cf7191c4410ca7d869b033fc68981dc4de70
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Do not parse VBATT entry in DT if this feature is disabled.
CRs-Fixed: 1078147
Change-Id: I0aa3443a2fddfa200631b6fe9eb22de10178fe46
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Pat9125 is a gpio driven i2c slave. This change adds the gpio
configuration and pinctrl support for pat9125 driver.
Change-Id: I2a9b379715622b5f010a5780ca481da7f9619400
Signed-off-by: Vevek Venkatesan <vevekv@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
During hardware reset if XO gets disabled and while polling to
confirm XO is disabled, bus timeout is noticed. So add
instructions to switch to CXO before disabling XO.
CRs-fixed: 1076441
Change-Id: Ia893786de4689e07f8d99d1ba3d8f1d6efcc7686
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Voter clocks nodes would require aggregation of all child node rates.
Certain clocks that are not rate-settable can still take
advantage of voter clock functionality.
Change-Id: Ibab7a5aa6aa89236974fcd0d65ffe0bd1a7acb12
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Correct the mpidr configuration for cpu nodes, so that cpu
topology matches the layout of physical CPUs for msmtriton.
Change-Id: Id568f76e03b93cf411366abf01ea857fb80ff1bf
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add size checks to validate minimum size is met. Update log messages
to include only relevant information to ensure logs are accurate and
useful.
Change-Id: Idf76a7d964ec6989a0474d49895e54103f17938b
CRs-fixed: 1073129
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Some UDC driver doesn't allow or throw errors when USB request buffer
queued is unaligned i.e. buffer size is not equal to wMaxPacketSize or
multiple of wMaxPacketSize. Fix this issue by using 1024 bytes as MIDI
buffer size instead of 256 bytes.
Change-Id: I71d520a5a800a3e612dc4d57e7baffa93fad61b3
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Update TRAINING_PATTERN_SET then TRAINING_LANEx_SET in the
Clock Recovery phase of link training as this is the sequence
mandated in the display port specification.
CRs-Fixed: 1076516
Change-Id: I7aa157d9377799563180792fe5d31a22a7aff0e1
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Silver and gold cluster use different PMU_EVENT and may need to have
different threshold values.
This patch creates different sysfs entries for silver and gold cluster.
CRs-Fixed: 1004392
Change-Id: I88cdf5110cadb44a81c0c700d5188bf639bb2129
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
