Commit graph

263967 commits

Author SHA1 Message Date
Kjetil Oftedal
38f7f8f05e sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt
On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts
and has a specialized interrupt handler. IPI is currently set to use IRQ 14
as well, which causes it to trigger the timer interrupt handler, and not the
IPI interrupt handler.

The IPI interrupt is therefore changed to IRQ 13, which is the highest
normally handled interrupt. This IRQ is also used for SBUS interrupts,
however there is nothing in the IPI/SBUS interrupt handlers that indicate
that they will not handle sharing the interrupt.
(IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a
sun4d system)

Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29 09:20:40 -07:00
Stephen Rothwell
2ee04a1069 sparc: Remove another reference to nfsservctl
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29 09:19:24 -07:00
Sakari Ailus
69d232ae8e [media] omap3isp: ccdc: Use generic frame sync event instead of private HS_VS event
The ccdc block in the omap3isp produces events whenever it starts receiving
a new frame. A private HS_VS event was used for this previously. Now, the
generic V4L2_EVENT_FRAME_SYNC event is being used for the purpose.

This patch also provides the frame sequence number to user space.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-29 12:38:51 -03:00
Sakari Ailus
eab00a0da2 [media] v4l: events: Define V4L2_EVENT_FRAME_SYNC
Define a frame sync event to tell user space when the reception of a frame
starts.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-29 12:37:15 -03:00
Joonyoung Shim
6380c50921 drm: Fix the number of connector and encoder to cleanup functions
It is left out the code to decrease the number of connector and encoder
to the cleanup functions.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-29 11:47:35 +01:00
Stephane Eranian
a8d757ef07 perf events: Fix slow and broken cgroup context switch code
The current cgroup context switch code was incorrect leading
to bogus counts. Furthermore, as soon as there was an active
cgroup event on a CPU, the context switch cost on that CPU
would increase by a significant amount as demonstrated by a
simple ping/pong example:

 $ ./pong
 Both processes pinned to CPU1, running for 10s
 10684.51 ctxsw/s

Now start a cgroup perf stat:
 $ perf stat -e cycles,cycles -A -a -G test  -C 1 -- sleep 100

$ ./pong
 Both processes pinned to CPU1, running for 10s
 6674.61 ctxsw/s

That's a 37% penalty.

Note that pong is not even in the monitored cgroup.

The results shown by perf stat are bogus:
 $ perf stat -e cycles,cycles -A -a -G test  -C 1 -- sleep 100

 Performance counter stats for 'sleep 100':

 CPU1 <not counted> cycles   test
 CPU1 16,984,189,138 cycles  #    0.000 GHz

The second 'cycles' event should report a count @ CPU clock
(here 2.4GHz) as it is counting across all cgroups.

The patch below fixes the bogus accounting and bypasses any
cgroup switches in case the outgoing and incoming tasks are
in the same cgroup.

With this patch the same test now yields:
 $ ./pong
 Both processes pinned to CPU1, running for 10s
 10775.30 ctxsw/s

Start perf stat with cgroup:

 $ perf stat -e cycles,cycles -A -a -G test  -C 1 -- sleep 10

Run pong outside the cgroup:
 $ /pong
 Both processes pinned to CPU1, running for 10s
 10687.80 ctxsw/s

The penalty is now less than 2%.

And the results for perf stat are correct:

$ perf stat -e cycles,cycles -A -a -G test  -C 1 -- sleep 10

 Performance counter stats for 'sleep 10':

 CPU1 <not counted> cycles test #    0.000 GHz
 CPU1 23,933,981,448 cycles      #    0.000 GHz

Now perf stat reports the correct counts for
for the non cgroup event.

If we run pong inside the cgroup, then we also get the
correct counts:

$ perf stat -e cycles,cycles -A -a -G test  -C 1 -- sleep 10

 Performance counter stats for 'sleep 10':

 CPU1 22,297,726,205 cycles test #    0.000 GHz
 CPU1 23,933,981,448 cycles      #    0.000 GHz

      10.001457237 seconds time elapsed

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110825135803.GA4697@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29 12:28:33 +02:00
WANG Cong
feff8fa007 sched: Fix a memory leak in __sdt_free()
This patch fixes the following memory leak:

unreferenced object 0xffff880107266800 (size 512):
  comm "sched-powersave", pid 3718, jiffies 4323097853 (age 27495.450s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81133940>] create_object+0x187/0x28b
    [<ffffffff814ac103>] kmemleak_alloc+0x73/0x98
    [<ffffffff811232ba>] __kmalloc_node+0x104/0x159
    [<ffffffff81044b98>] kzalloc_node.clone.97+0x15/0x17
    [<ffffffff8104cb90>] build_sched_domains+0xb7/0x7f3
    [<ffffffff8104d4df>] partition_sched_domains+0x1db/0x24a
    [<ffffffff8109ee4a>] do_rebuild_sched_domains+0x3b/0x47
    [<ffffffff810a00c7>] rebuild_sched_domains+0x10/0x12
    [<ffffffff8104d5ba>] sched_power_savings_store+0x6c/0x7b
    [<ffffffff8104d5df>] sched_mc_power_savings_store+0x16/0x18
    [<ffffffff8131322c>] sysdev_class_store+0x20/0x22
    [<ffffffff81193876>] sysfs_write_file+0x108/0x144
    [<ffffffff81135b10>] vfs_write+0xaf/0x102
    [<ffffffff81135d23>] sys_write+0x4d/0x74
    [<ffffffff814c8a42>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org # 3.0
Link: http://lkml.kernel.org/r/1313671017-4112-1-git-send-email-amwang@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29 12:27:01 +02:00
Thomas Gleixner
9c40cef2b7 sched: Move blk_schedule_flush_plug() out of __schedule()
There is no real reason to run blk_schedule_flush_plug() with
interrupts and preemption disabled.

Move it into schedule() and call it when the task is going voluntarily
to sleep. There might be false positives when the task is woken
between that call and actually scheduling, but that's not really
different from being woken immediately after switching away.

This fixes a deadlock in the scheduler where the
blk_schedule_flush_plug() callchain enables interrupts and thereby
allows a wakeup to happen of the task that's going to sleep.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org # 2.6.39+
Link: http://lkml.kernel.org/n/tip-dwfxtra7yg1b5r65m32ywtct@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29 12:26:59 +02:00
Thomas Gleixner
c259e01a1e sched: Separate the scheduler entry for preemption
Block-IO and workqueues call into notifier functions from the
scheduler core code with interrupts and preemption disabled. These
calls should be made before entering the scheduler core.

To simplify this, separate the scheduler core code into
__schedule(). __schedule() is directly called from the places which
set PREEMPT_ACTIVE and from schedule(). This allows us to add the work
checks into schedule(), so they are only called when a task voluntary
goes to sleep.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org # 2.6.39+
Link: http://lkml.kernel.org/r/20110622174918.813258321@linutronix.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29 12:26:57 +02:00
Magnus Damm
a408baea3c ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support
Add clock control support for sh7372 CMT hardware blocks.

No upstream sh7372 boards are making use of CMT3 + CMT4,
but the sh7372 hardware happens to come out of reset with
all CMT MSTP clocks _enabled_, so to save power we need
to implement a fix in software to shut down unused clocks.

This patch relies on the recently merged

 794d78f drivers: sh: late disabling of clocks V2

to make sure the unused clocks get disabled as expected.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:41:02 +09:00
Magnus Damm
7ceb6666f0 ARM: mach-shmobile: sh7372 MSIOF clock support
Add clock control support for sh7372 MSIOF hardware blocks.

No upstream sh7372 boards are making use of MSIOF0->2,
but the sh7372 hardware happens to come out of reset with
all MSIOF MSTP clocks _enabled_, so to save power we need
to implement a fix in software to shut down unused clocks.

This patch relies on the recently merged

 794d78f drivers: sh: late disabling of clocks V2

to make sure the unused clocks get disabled as expected.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:39:58 +09:00
Kuninori Morimoto
6b4cb8ffe8 ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings
USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214
this patch tested on mackerel board

Reported-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:37:38 +09:00
Kuninori Morimoto
86d84083cf ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter
MAINCKSEL is [29:28], not [27:24]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:22:39 +09:00
Magnus Damm
4861da4fee ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS
This patch removes support for the SGX interrupt source in
the sh7372 INTCS controller.

The SGX hardware block included in sh7372 is already hooked
up to the ARM Cortex-A8 core using the INTCA controller,
so SGX users are encouraged to make use of that interrupt
source instead.

Removing support for the SGX interrupt source in INTCS
simplifies the sh7372 power management code by allowing
us to assume that only INTCA needs to be powered on to
operate the SGX hardware.

If the INTCS interrupt source would be kept then the kernel
would be forced to deal with additional dependencies that does
not follow the regular power domain hiearachy. With this
patch in place we can safely power down INTCS while the
SGX is operating.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:13:10 +09:00
Paul Mundt
8a1c049aa9 Merge branch 'rmobile/dma' into rmobile-fixes-for-linus 2011-08-29 16:10:24 +09:00
Yoshihiro Shimoda
21d41f2b31 sh: fix the compile error in setup-sh7757.c
Fix the following build errors:

  CC      arch/sh/kernel/cpu/sh4a/setup-sh7757.o
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: implicit declaration of function ‘DMA_BIT_MASK’
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: initializer element is not constant
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: (near initialization for ‘usb_ehci_device.dev.coherent_dma_mask’)
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: initializer element is not constant
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: (near initialization for ‘usb_ohci_device.dev.coherent_dma_mask’)
make[3]: *** [arch/sh/kernel/cpu/sh4a/setup-sh7757.o] Error 1

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 15:47:38 +09:00
Yoshii Takashi
4480a688b2 serial: sh-sci: report CTS as active for get_mctrl
sh-sci.c sets hardware up and then let the HW do all flow controls.
There is no software code, nor needs to get/set real CTS signal.

But, when turning CRTSCTS on through termios, uart_set_termios() in
serial_core.c checks CTS, and stops TX if it is inactive at the moment.

Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS,
the sequence
  open -> set CRTSCTS -> write
hit the case and stop working, no more outputs.

This patch makes sci_get_mctrl() report CTS in addition.

Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 15:47:33 +09:00
Phil Edworthy
34f7145a63 sh: Add unaligned memory access for PC relative intructions
This adds unaligned memory access support for the following instructions:
  mov.w @(disp,PC),Rn
  mov.l @(disp,PC),Rn

These instructions are often used on SH2A toolchains.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 15:32:10 +09:00
Phil Edworthy
0710b91c51 sh: Fix unaligned memory access for branches without delay slots
This patch just clears the return code for those cases where an
unaligned memory access occurs on branch instructions without a
delay slot.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 15:32:04 +09:00
Linus Torvalds
c6a389f123 Linux 3.1-rc4 2011-08-28 21:16:01 -07:00
Shawn Guo
66506f7617 mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h
There are the following warnings and errorx when compiling the driver.
The patch adds the missing inclusion of linux/module.h to fix them.

drivers/mmc/host/sdhci-esdhc-imx.c:563:12: error: ‘THIS_MODULE’ undeclared here (not in a function)
[..]

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-28 14:10:00 -04:00
Linus Torvalds
c11a7e26f8 Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)
  OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  PM / Runtime: Correct documentation of pm_runtime_irq_safe()
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix
  sh-sci / PM: Use power.irq_safe
  PM: Use spinlock instead of mutex in clock management functions
2011-08-28 10:05:39 -07:00
Russell King
2590415716 ARM: pm: avoid writing the auxillary control register for ARMv7
For ARMv7 kernels running in the non-secure world, writing to the
auxillary control register causes an abort, so we must avoid directly
writing the auxillary control register.  If the ACR has already been
reinitialized by SoC code, don't try to restore it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:54 +01:00
Russell King
f35235a315 ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness
Add a dsb after the isb to ensure that the previous writes to the
CP15 registers take effect before we enable the MMU.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:54 +01:00
Russell King
1c0270cd3a ARM: pm: arm920/926: fix number of registers saved
ARM920 and ARM926 save four registers, not three.  Fix the size of
the suspend region required.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:54 +01:00
Russell King
6f354e5f40 ARM: pm: CPU specific code should not overwrite r1 (v:p offset)
r1 stores the v:p offset from the CPU invariant resume code, and is
expected to be preserved by the CPU specific code.  Overwriting it is
not a good idea.

We've managed to get away with it on sa1100 platforms because most
happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the
case depending on kernel configuration.  So fix this latent bug.

This fixes xsc3 as well which was saving and restoring this register
independently.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:53 +01:00
Will Deacon
0f81bb6b05 ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU
cpu_v7_reset disables the MMU and then branches to the provided address.
On Thumb-2 kernels, we should take care to clear the Thumb Exception
enable bit in the System Control Register, otherwise this may wreak
havok in the code to which we are branching (for example, an ARM kernel
image via kexec).

Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:53 +01:00
Will Deacon
552e0c8da8 ARM: 7065/1: kexec: ensure new kernel is entered in ARM state
Commit 540b5738 ("ARM: 6999/1: head, zImage: Always Enter the kernel in
ARM state") mandates that the kernel should be entered in ARM state.

If a Thumb-2 kernel kexecs a new kernel image, we need to ensure that
we change state when branching to the new code. This patch replaces a
mov pc, lr with a bx lr on Thumb-2 kernels so that we transition to ARM
state if need be.

Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28 10:39:41 +01:00
Linus Torvalds
219f358e0b Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix panic after rmmod with slow targets
2011-08-27 09:32:08 -07:00
Jose Alberto Reguero
c9f88aa976 [media] ttusb2: add support for the dvb-t part of CT-3650 v3
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:44:49 -03:00
istvan_v@mailbox.hu
84b271488d [media] cx88: notch filter control fixes
This patch reduces the number of available choices for the notch filter type control
so that the standard-specific filter types cannot be selected. It is now limited to
being either 0 (4xFsc, the default) or 1 (square pixel optimized).
The patch also removes the initialization of this control from cx88_reset(), since
that is already done by init_controls(), which is called by cx8800_initdev().

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:21:16 -03:00
Joe Perches
2b50763a0b [media] tda18212: Use standard logging, remove tda18212_priv.h
Use the more current logging styles with pr_fmt.
Remove now unnecessary private include.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:20:45 -03:00
Joe Perches
be85fefecb [media] tda18271: Use printk extension %pV
Deduplicate printk formats to save ~20KB text.

$ size drivers/media/common/tuners/tda18271*o.*
   text	   data	    bss	    dec	    hex	filename
  10747	     56	   1920	  12723	   31b3	drivers/media/common/tuners/tda18271-common.o.new
  18889	     56	   3112	  22057	   5629	drivers/media/common/tuners/tda18271-common.o.old
  20561	    204	   4264	  25029	   61c5	drivers/media/common/tuners/tda18271-fe.o.new
  31093	    204	   6000	  37297	   91b1	drivers/media/common/tuners/tda18271-fe.o.old
   3681	   6760	    440	  10881	   2a81	drivers/media/common/tuners/tda18271-maps.o.new
   5631	   6760	    680	  13071	   330f	drivers/media/common/tuners/tda18271-maps.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:19:43 -03:00
Antti Palosaari
f68baeff45 [media] af9015: use logic or instead of sum numbers
Style issue.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:14:43 -03:00
Antti Palosaari
4c0cfa24f7 [media] af9015: map remote for Leadtek WinFast DTV2000DS
Thanks to Thomas Gutzler for reporting this.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Thomas Gutzler <thomas.gutzler@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:14:32 -03:00
Antti Palosaari
e36454376a [media] em28xx: use MFE lock for PCTV nanoStick T2 290e
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:14:22 -03:00
Julia Lawall
eb28dc39d3 [media] drivers/media/dvb/dvb-usb/usb-urb.c: adjust array index
Convert array index from the loop bound to the loop index.

A simplified version of the semantic patch that fixes this problem is as

// <smpl>
@@
expression e1,e2,ar;
@@

for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 11:14:15 -03:00
Julian Scheel
93165b7774 [media] Add support for new revision of KNC 1 DVB-C cards. Using tda10024 instead of tda10023, which is compatible to tda10023 driver
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 10:41:46 -03:00
Benjamin Larsson
3188d5485e [media] get_dvb_firmware: Firmware extraction for IT9135 based devices
Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 10:37:56 -03:00
Malcolm Priestley
f6d8735493 [media] it913x: Driver for Kworld UB499-2T (id 1b80:e409) v1.05
Driver for Kworld UB499-2T (id 1b80:e409)

The device driver has been named it913x, so that support for other family members
can be added later.

TODOs
Firmware support for other it913x devices.
Remote control support, there are two known types.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 10:35:21 -03:00
Malcolm Priestley
52cb3e2757 [media] it9137: Fimrware retrival information for Kworld UB499-2T T09 (id 1b80:e409)
Firmware information for Kworld UB499-2T T09 based on IT913x series. This device
uses file dvb-usb-it9137-01.fw.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 10:30:43 -03:00
Malcolm Priestley
3dbbf82f49 [media] it913x_fe: frontend and tuner driver v1.05
Fronted and Tuner Driver for ITE IT913x Series with inital support for
IT9137 integrated demodulator and tuner device.

The driver is loosely based on AF9035 series. However, support is not intended for
this device specificity.

The IT9137 tuner has been tested on UHF bands, but VHF has only been simulated.

Possible TODO the tuner sections may be separated from the main driver. All future devices
should use the it913x_fe_script_loader for other tuner devices.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
[mchehab@redhat.com: Fix an issue at the Kconfig help]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 10:29:20 -03:00
Doron Cohen
ea3709435c [media] siano: apply debug flag to module level
Siano modules already had sms_dbg flag which is a module parameter which
sets the debug mode so module prints messages to dmesg for debugging.
The variable was static therefore apply only to the file which defines
the module. In modules as smsmdtv.ko that contain a few files, the debug
flag applied only for functions in that main file.
flag was changed to be non-static and therefore can be accessed by all
module files (although it is still not exported out of the module).

Signed-off-by: Doron Cohen <doronc@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 09:56:06 -03:00
Magnus Damm
d0168fdc7a ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)
This patch updates the recently submitted
"Associate the HDMI clock together with LCDC1 on sh7372"
to V2 with the following change:
 - Use lcdc1_device on AP4EVB to build properly.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-27 14:21:00 +02:00
Jarod Wilson
fda516b72a [media] mceusb: update version, copyright, author
Add note about recent updates coming from Microsoft's publicly available
specs on Windows Media Center remotes and receivers/transmitters.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:57:01 -03:00
Jarod Wilson
e217fb43c4 [media] mceusb: report actual tx frequencies
Rather than dumping out hex values, lets print the actual calculated
frequency and period the hardware has been configured for. After this

[ 2643.276215] mceusb 3-1:1.0: tx data: 9f 07 (length=2)
[ 2643.276218] mceusb 3-1:1.0: Get carrier mode and freq
[ 2643.277206] mceusb 3-1:1.0: rx data: 9f 06 01 42 (length=4)
[ 2643.277209] mceusb 3-1:1.0: Got carrier of 37037 Hz (period 27us)

Matches up perfectly with the table in Microsoft's docs.

Of course, I've noticed on one of my devices that the MS-recommended
default value of 1 for carrier pre-scaler and 66 for carrier period was
butchered, and instead of converting 66 to hex (0x42 like above), they
put in 0x66, so the hardware reports a default carrier of 24390Hz.
Fortunately, I guess, this particular device is rx-only, but I wouldn't
put it past other hw to screw up here too.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:56:39 -03:00
Jarod Wilson
b71969bee2 [media] mceusb: flash LED (emu v2+ only) to signal end of init
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:55:33 -03:00
Jarod Wilson
a411e83944 [media] mceusb: get misc port data from hardware
According to the specs, you can read the number of tx ports, number of
rx sensors, which tx ports have cables plugged into them, and which rx
sensors are active. In practice, most of my devices do seem to report
sane values for tx ports and rx sensors (but not all -- one without any
tx ports reports having them), and most report the active sensor
correctly, but only one of eight reports cabled tx ports correctly. So
for the most part, this is just for informational purposes.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:55:02 -03:00
Jarod Wilson
ab1072eba9 [media] mceusb: query device for firmware emulator version
Supposedly, there are essentially three different classes of devices
that are compatible with Microsoft's specs. First are the "legacy"
devices, which are built using Microsoft-provided hardware specs and
firmware. Second are "emulator" devices, which are built using custom
hardware and firmware, written to emulate Microsoft's firmware. Third
are "port" devices, which have their own device driver and firmware,
which provides compatible data to higher levels of the stack.

>From what I can tell, things like nuvoton-cir and fintek-cir are
essentially "port" devices -- their raw IR buffer format is very similar
to that of the mceusb devices. Now, within the mceusb driver, we have
three different "generations", which at first, seemed like maybe they
mapped to emulator versions. Unfortuantely, every single device I have
responds "illegal command" to the query to get firmware emulator version
from the hardware, which means they're either all emulator version 1, or
they're legacy devices, and our different "generations" aren't at all
related here. Though in theory, its possible the gen1 devices are
"legacy" devices and the rest are emulator v1. There are some useful
features of the v2 interface I was hoping to play with, but alas...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:53:15 -03:00
Jarod Wilson
4840b788ad [media] mceusb: issue device resume cmd when needed
According to MS docs, the device firmware may halt after receiving an
unknown instruction, but that it should be possible to tell the firmware
to continue running by simply sending a device resume command. So lets
do that.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-27 08:51:27 -03:00