Enable CONFIG_MMC_RING_BUFFER to support ring buffer
logging of legacy and CQ events for sdm660.
Change-Id: I91e7dc68b929c0bf03d76510a084ee89ca4cd030
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
We no longer support isolating a core using the isolate node. Remove
write-access to this node.
Change-Id: Ib51cf12066819ad295ce57f6ae8edf52b0a4e558
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
When there is Modem WDOG bite, Q6 will not get chance to reset
the hardware and if shutdown is called as part of PD down
notification then freeing buffers already submitted to hardware
may cause exceptions as hardware may try to access DDR location
which is already freed.
Fix the issue by delaying the shutdown till FW ready happens and
hardware is reset to clean state this way buffers are freed after
hardware is in reset state.
CRs-fixed: 2000709
Change-Id: Iacea5e8b712dd4ca310e5b502e43f4beb99f6981
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Add more refined states with service notifier notification for clients
to be able to distinguish between different error scenarios.
CRs-Fixed: 2004229
Change-Id: Ibae1f2b0ba03f8cdcb14398d7d35b007fac1a150
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Since max_interrupters flag includes primary interrupter as well,
update the bound check when this flag is being used for
secondary event ring clean-up/allocation.
Change-Id: I044c5a89fe17779eb847981cbf27e99b97e37d80
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Add alias name for the secondary GPU temperature sensor in MSM8998. This
alias information will be used by thermal-engine.
Change-Id: I4d3400efef8886153018435468526f88418ee0a0
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Add a spinlock to protect the state transitions in rndis ipa
driver.
Change-Id: Ia5eab252d9a53e6a2f4db07912967a5f466982a6
Acked-by: Chaitanya Pratapa <cpratapa@qti.qualcomm.com>
Acked-by: Javid Mohammed <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Signed-off-by: Sridhar Ancha <sancha@codeaurora.org>
Do not consider debug file system init failure as
functional failure.
Modify the code to proceed further
driver initialization.
Change-Id: I821af8970b6c2ced55d6464b8a7b56a458fa7d79
Acked-by: Javid Mohammed <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
While initializing the SMMU with DOMAIN_ATTR_ATOMIC attribute
iommu driver always vote for aggre2_noc_clk during suspend mode
which result into power penalty. To resolve this issue avoid
configuring DOMAIN_ATTR_ATOMIC attribute in S1_BYPASS mode.
CRs-fixed: 2004562
Change-Id: Ic5d4b2864f58098fd29da48e5f977434e356b1e0
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
Add smmu-s1-bypass flag to the icnss node. so based on target
requirement the user can configure different SMMU configuration.
CRs-fixed: 2004562
Change-Id: I04297b5dbc013a8df4603887794f98a8f8ea2bcc
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
Add smmu-s1-bypass flag to the icnss node. so based on target
requirement the user can configure different SMMU configuration.
CRs-fixed: 2004562
Change-Id: If44232baaeab27a1abc93126f65fe5ee6fca6cd4
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
Currently driver does read max Transfer size from RNDIS_MSG_INIT
control message, when received from Host, but it is wrongly being
decoded due to wrong offset used. This leads dl_aggregation size set to
0 instead of required rndis_dl_aggr_size. Hence fix this by incrementing
tmp pointer for requestID to use correct offset to read max Transfer
size and set DL aggregation size correctly.
Also pass maxpkt_per_xfer as zero to rndis_qc_bind_config_vendor() so that
UL aggregation buffer size will be set to aggregation of 15 packets. This
helps in improving througput numbers.
Change-Id: Icc7506b57d26f82e6bf81f9d7dc1515cfbae6c82
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
MMCC and GPU clocks needs the post div bits to be cleared, so that the
clock measure does not account for any previously set div values in the
debug mux.
Change-Id: I1123e566740518e287692797fa3ab6b316da3bf1
Signed-off-by: Taniya Das <tdas@codeaurora.org>
There could be cases where the post div in different debug muxes could be
set previously and not cleared, so add support to clear and set it, in case
required.
Change-Id: I15fedb4672179cb604804e7cbb0d6afc68bc473b
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Update tsens mapping for cluster0 mitigation profile based on
latest recommendation for sdm630. With new recommendation, tsens7 is
used for cluster0 mitigation profile.
Change-Id: Ia60fb7ff72504a9429fe0c75d0d8252fceeeb696
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
