Buffer object specific resources like pages, domains, sg list
need not be protected with struct_mutex. They can be protected
with a buffer object level lock. This simplifies locking and
makes it easier to avoid potential recursive locking scenarios
for SVM involving mmap_sem and struct_mutex. This also removes
unnecessary serialization when creating buffer objects, and also
between buffer object creation and GPU command submission.
Change-Id: I40cb437d0186c3d9aac365c9baba0aa4792f0aa1
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Not all endpoints support all channels supported by MHI host. Only allow
clients to register if requested channel is supported by endpoint.
CRs-Fixed: 2053250
Change-Id: Ib4bd8d21b8f43d693da30b8fafe2cb9d2e128a17
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
During MHI INIT, memory is allocated for firmware and
rddm vector table. This memory is not freed when DE_INIT
is called.
CRs-Fixed: 2053206
Change-Id: I85b2644189915dd25d8ac31190f16799f86cbd12
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
MHI is not supported by all targets, however many MHI client drivers
have a common driver that include MHI APIs. Create dummy APIs such
that even if MHI not present, does not cause any compile errors.
CRs-Fixed: 2053159
Change-Id: I427d925a658518d230a1d14df0cf27a7b19f207e
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Restrict the virtual address size to 39-bits to allow
a maximum of 3 pagetable levels.
Change-Id: I264f23a2e16cc7599bdad8a161854bcf6e24dd4a
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Define a 36-bit address space for TTBR1 which is used for
kernel side GPU buffer objects.
Change-Id: I1c4eaee0fd92236793621c7d3dba1700e56fefd2
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Due to an egregious misunderstanding of the specification it
was thought that to do the TTBR1 matching correctly the sign
extension bit needed to match the input address space. This
is incorrect - the TTBR1 range is determined by the size of
the TTBR1 space (in our case, the same as the input address
space). For example if the input address size is 36, the
effective range of the pagetables are:
TTBR0: 0x00000000_00000000 - 0x0000000f_ffffffff
TTBR1: 0xfffffff0_00000000 - 0xffffffff_ffffffff
For its part the sign extension bit needs should be set based on
the upstream bus size. If the device has a UBS of 49 then the
sign extension bit is assumed by design to be 48 otherwise
the driver needs to pick the highest available bit and reduce
the input address space by 1.
Because the client driver shouldn't need to know the upstream
bus size, convention is to use a fully sign extended unsigned
long address for TTBR1 mappings. If the sign extension bit is set
lower than the upstream bus size some implementations assume that
bits above the sign extension bit need to be zero and breaks the
convention. Setting the sign extension bit correctly for the
upstream bus size ensures that sign extension always works.
The hardware will match an address to the TTBR1 if all the bits
between the sign extension bit and the input address size are set
to 1. We emulate this behavior in software when looking up a pagetable
for a software operation.
Change-Id: Ic0dedbad80c72f11bc8a7e6792f0e3c2f58bc674
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
When the CC state change IRQ fires on USB removal the debounce done
status may still be high, and the removal cleanup will not be called.
Use the UFP/DFP status bits to determine whether the CC lines are
present or not instead.
While at it cache the CC state so it doesn't have to be derived
everywhere it is needed. The status bits are already cached, so there
should be no functional difference.
Change-Id: Ifb89c78a032ae9d38fbc8c281518698941e131c2
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Upon receiving a PD message the state machine is queued to
act on it. However, if another message is received quickly
before usbpd_sm is scheduled, it will only process the first
message. Add a check if the RX queue is not empty in order
to drain the messages properly.
Change-Id: Ie9e079a51a5740024c9a1be5ba27b3edacf9b2df
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Checking RX_FIFO allocation status from deferred thread also causes
in_ssr flag reset and reading stale data from FIFO, If the deferred
thread schedules after the execution of ssr() function.
Check RX_FIFO status only after receiving the interrupt from remote
side which happens after remote sub-system recover from SSR.
CRs-Fixed: 2054480
Change-Id: I39269f6b2e1f1cb9aecd25fa40e73c2d6f12dbd5
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.
Change-Id: I44dea20e10c056c1c5e80d01bab0a274ff768b1c
Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
There are two definitions of struct dss_vreg in mdss driver.
One is used during parsing regulators from device tree file,
the other is used when operating regulators. This introduces
different understanding of dss_vreg data in these two places.
Future plan is to have only one definition for these shared
data structure. Currently only make dss_vreg in sync to fix
this issue.
CRs-Fixed: 2054371
Change-Id: I4f16e1409c832432fa1df73b0ae030176b664e58
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Modify coresight device node in dts to comply with the
new implementation of coresight driver for msm8996.
Change-Id: I10b236208a1f9e76b4d27a623c024b1f9f6a50ca
Signed-off-by: Wei Li <weili@codeaurora.org>
Avdd enable gpio is used for msm8998 QVR/SKUK HDK to control
avdd output. This gpio should be enabled/disabled when panel
does unblank/blank once to avoid panel electric leakage.
Change-Id: I73b4cbff81b5ce0c2abdfb2f2a6beafb303fb266
Signed-off-by: Yahui Wang <yahuiw@codeaurora.org>
Add support for 1.8v external power supply HDMI PHY sequence
which is used by bridge chip.
CRs-Fixed: 1074721
Change-Id: I0ae55cdc9151949b81f6de828238e4b88ceea3df
Signed-off-by: Lei Chen <chenl@codeaurora.org>
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
Null packet insertion helps keep dsi lanes in HS mode
even when no data is available in between frames sent
from MDP.
Change-Id: Icf95cdf88d934d02a2f3f00a350c1567b774d890
Signed-off-by: Animesh Kishore <animeshk@codeaurora.org>
Add trace event support for PIL Module to help in
debugging.
Change-Id: If560e275f3207eca4b084cba5e6384a7c452748c
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
-Use %pK for kernel address to avoid the information leak.
(Change-Id: Ib0631d5578aba033510babe4f43e2a63bb959747)
CRs-Fixed: 2009672
Change-Id: Id7e8c41251612ce1a93dba854b5cc03e894c5d09
Signed-off-by: Alok Kediya <kediya@codeaurora.org>
Signed-off-by: VijayaKumar T M <vtmuni@codeaurora.org>
Port of ioctl validation for zero length ioctl
from camera_v2.
Change-Id: I635522f331d1e18641196ee3101c64ccc285636a
CRs-fixed: 2025367
Signed-off-by: Terence Ho <terenceh@codeaurora.org>
Avdd enable gpio maybe used for AMOLED panel to control avdd
output. This gpio should be enabled/disabled when panel
does unblank/blank once to avoid panel electric leakage.
Change-Id: I18f0f6491f0ff97df5556e74a686a18b262708df
Signed-off-by: Yahui Wang <yahuiw@codeaurora.org>
The current algorithm to bring additional BIG CPUs is very
conservative. It works when BIG tasks alone run on BIG
cluster. When co-location and scheduler boost features
are activated, small/medium tasks also run on BIG cluster.
We don't want these tasks to downmigrate, when BIG CPUs are
available but isolated. The following changes are done to
un-isolate CPUs more aggressively.
(1) Round up the big_avg. When the big_avg indicates that
there are 1.5 tasks on an average in the last window, it
indicates that we need 2 BIG CPUs not 1 BIG CPU.
(2) Track the maximum number of running tasks in the last
window on all CPUs. If any of the CPU in a cluster has more
than 4 runnable tasks in the last window, bring an additional
CPU to help out.
Change-Id: Id05d9983af290760cec6d93d1bdc45bc5e924cce
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
When a short sleeping task goes for a long sleep, the task's
avg_sleep_time signal gets boosted. This signal will not go
below short_sleep threshold for a long time time even when the
task run in short bursts. This results in frequent preemption
of other tasks as the short burst tasks are placed on busy CPUs.
The idea behind tracking avg_sleep_time signal is to detect if a
task is short sleeping or not. Limit the sleep time to twice the
short sleep threshold to make avg_sleep_time signal more responsive.
This won't affect regular long sleeping tasks, as the avg_sleep_time
would be higher than threshold.
Change-Id: Ic0838e81ef7f5d83864a58b318553afc42812853
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
In function submit_create, if nr_cmds or nr_bos is assigned with
negative value, the allocated buffer may be small than intended.
Using this buffer will lead to buffer overflow issue.
Change-Id: I0b61cccffd836e2dd3c859446470af4b6451b9ed
Signed-off-by: Kasin Li <donglil@codeaurora.org>
Get_Source_Cap message is responded by sending source capability message
without running sender response timer after GoodCRC is received. As a
result if sender response is timed out driver is not issuing hard reset.
Fix the issue by moving policy engine state from PE_SRC_READY to
PE_SRC_SEND_CAPABILITIES which starts sender response timer and handles
timeout.
Change-Id: Id47a4c8f989db19d28ef9c8b2c069d0b7797e17f
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Under MDSS suspend resume usecase, the mixer config might not be
setup and if a partial update is issued for the first frame, it is
necessary to avoid accessing the NULL mixer config.
CRs-Fixed: 2053822
Change-Id: I17c0b98805ce9395899e988032097740126fee83
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
If flow control functionality is not enabled in traffic controller
userspace modules, WARN_ONCE messages are triggered. Note that qdisc
will still be setup even if these debug messages are logged.
Remove these messages to reduce log spam.
CRs-Fixed: 2053221
Change-Id: I62a2fcb30d19579180b3df16f33953546f94511a
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Update pte and dma atos debugfs nodes to be inline
with other iommu debugfs nodes and only expose memory
addresses when kptr_restrict is disabled.
Change-Id: I46d5de498b811b4874be570aea7b41461b9a1a98
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Only expose debugfs nodes for test devices.
Restrict secure attach to a valid vmid.
Add clock reference counting to make code more robust.
Restrict address printing with kptr_restrict.
Change-Id: Ibf90068d778b0156e3bb42287af5dda3864da5fc
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Add upto 192KHz support for Multimedia18 FE DAI. This FE DAI
is to support DSP loopback upto 192KHZ.
CRs-Fixed: 2049714
Change-Id: I7197744a02b0bd23e40eebe23b0220a5dd22ac47
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
For secure dolby playback runtime integrity check(RTIC) is
performed in DSP. Add support to handle this rtic events for
secure playback.
Change-Id: If7a64267e2177e179e6c90296bddcde3b06c75ff
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
