Here's the patch that implements the fix you suggested to avoid the
I/O errors that I was running into with my new USB enclosure with a
JMicron USB/ATA bridge, while issuing scsi-io USN or other such
queries used by Fedora's mkinitrd.
http://bugzilla.kernel.org/show_bug.cgi?id=9638#c85
/proc/bus/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=152d ProdID=2329 Rev= 1.00
S: Manufacturer=JMicron
S: Product=USB to ATA/ATAPI Bridge
S: SerialNumber=DE5088854FFF
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
(patch applied and retested on a modified 2.6.27.2-libre.24.rc1.fc10)
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Cc: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
debugfs_create_file() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some Toshiba Mobile I/O chips have OHCI controller built in.
E.g. the tc6393xb chip found in several Toshiba e-Series PDAs
and in Sharp Zaurus SL-6000 PDA. This adds platform glue
to support OHCI function of the chip.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up the module init functions a bit and removes the redundant
device ID check from wb35_probe() function.
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver code uses do { } while (0) together with the break statement to
emulate gotos for error handling. Fix that up by using the goto statement
instead.
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the OS_SPIN_LOCK and related wrappers from the driver code.
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These functions aren't used yet, so put them behind the
proper #define so the compiler doesn't complain about them.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change C99 comments to C89 comments
Some nested comments seem to have been missed and some blocks are redundantly
commented, but at least most of the //'s are gone
Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix all complaints that checkpatch had regarding this patch
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Import the changes from the upstream driver into this version to keep
things up to date.
Cc: Yokota Hiroshi <yokota@netlab.cs.tsukuba.ac.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first cut at a driver for the Redrapids Pocket Change
CardBus devices.
Receiving data seems to work properly, but overflows happen on transmit.
Still needs more hardware debugging to work properly.
(cleaned up to use proper driver core api functions by Greg)
From: Vijay Kumar <vijaykumar@bravegnu.org>
Cc: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Ken Sienski <sienski@redrapids.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the very noisy "end of function" markers that are
very annoying when reading the driver code.
Cc: David Rowe <david@rowetel.com>
Cc: Steve Underwood <steveu@coppice.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The kernel is written in C, so remove the __cplusplus macro magic from the
driver.
Cc: David Rowe <david@rowetel.com>
Cc: Steve Underwood <steveu@coppice.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes dead code that is wrapped in #ifndef __KERNEL__.
Cc: David Rowe <david@rowetel.com>
Cc: Steve Underwood <steveu@coppice.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the malloc()/free() macro wrappers and converts
call-sites to use kcalloc() and kzalloc() where appropriate. I also
fixed up out-of-memory error handling in couple of places where it was
broken.
Cc: David Rowe <david@rowetel.com>
Cc: Steve Underwood <steveu@coppice.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Split out the external interface to a separate file called oslec.h .
Give the struct a name while we're at it.
Signed-off-by: Tzafrir Cohen <tzafrir@cohens.org.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes some obfuscating typedefs from the driver code.
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
drivers/staging/slicoss/slicoss.c
This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
drivers/staging/go7007/go7007-driver.c
drivers/staging/go7007/go7007-fw.c
drivers/staging/go7007/go7007-i2c.c
drivers/staging/go7007/go7007-usb.c
drivers/staging/go7007/snd-go7007.c
drivers/staging/go7007/wis-ov7640.c
drivers/staging/go7007/wis-saa7113.c
drivers/staging/go7007/wis-saa7115.c
drivers/staging/go7007/wis-sony-tuner.c
drivers/staging/go7007/wis-tw2804.c
drivers/staging/go7007/wis-tw9903.c
drivers/staging/go7007/wis-uda1342.c
This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Following Andrew Morton's review for this patch I made a patch that
fixes most of the remarks.
I've converted the sleep_on_timeout to wait_event_timeout but I
probably not in the right way.
Also I don't know what's the problem with the calls for get_user() so
I left them untouched.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Andrew Morton <akpm@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This hides under DEBUG_REGISTER_TRACE so probably
not visible to many people.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix leak in at76_usb as reported in:
http://bugzilla.kernel.org/show_bug.cgi?id=11778
Reported-by: Daniel Marjamäki <danielm77@spray.se>
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sxghif.h has code that explicitly will not build fo other architecures.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix "ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver" was not correct
due misunderstanding of DSP_A format and similar error in TLV320AIC33
codec which was used to test the original fix.
This patch corrects now DSP_A format in OMAP McBSP DAI driver and is
verified with TLV320AIC23 codec that's implementing DSP_A correctly.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xc008): Section mismatch in reference from the variable apic_x2apic_phys to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_phys references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf88): Section mismatch in reference from the variable apic_x2apic_cluster to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_cluster references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf08): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .init.text:uv_acpi_madt_oem_check()
The variable apic_x2apic_uv_x references
the function __init uv_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbe88): Section mismatch in reference from the variable apic_physflat to the function .init.text:physflat_acpi_madt_oem_check()
The variable apic_physflat references
the function __init physflat_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
