A recent patch added calls to of_irq_count() in the qcom pinctrl
drivers and that caused module build failures because
of_irq_count() is not an exported symbol. We shouldn't export
of_irq_count() to modules because it's an internal OF API that
shouldn't be used by drivers. Platform drivers should use
platform device APIs instead. Therefore, add a platform_irq_count()
API that mirrors the of_irq_count() API so that platform drivers
can stay DT agnostic.
Change-Id: I34cfc11feb2fbc2acc41e3697006d86a3cad3445
Cc: Andy Gross <andy.gross@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Git-commit: 4b83555d5098e73cf2c5ca7f86c17ca0ba3b968e
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
This reverts commit 9d6fd2c3e9 ("Merge remote-tracking branch
'msm-4.4/tmp-510d0a3f' into msm-4.4"), because it breaks the
dump parsing tools due to kernel can be loaded anywhere in the memory
now and not fixed at linear mapping.
Change-Id: Id416f0a249d803442847d09ac47781147b0d0ee6
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
* msm-4.4/tmp-510d0a3f:
Linux 4.4.11
nf_conntrack: avoid kernel pointer value leak in slab name
drm/radeon: fix DP link training issue with second 4K monitor
drm/i915/bdw: Add missing delay during L3 SQC credit programming
drm/i915: Bail out of pipe config compute loop on LPT
drm/radeon: fix PLL sharing on DCE6.1 (v2)
Revert "[media] videobuf2-v4l2: Verify planes array in buffer dequeueing"
Input: max8997-haptic - fix NULL pointer dereference
get_rock_ridge_filename(): handle malformed NM entries
tools lib traceevent: Do not reassign parg after collapse_tree()
qla1280: Don't allocate 512kb of host tags
atomic_open(): fix the handling of create_error
regulator: axp20x: Fix axp22x ldo_io voltage ranges
regulator: s2mps11: Fix invalid selector mask and voltages for buck9
workqueue: fix rebind bound workers warning
ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC
vfs: rename: check backing inode being equal
vfs: add vfs_select_inode() helper
perf/core: Disable the event on a truncated AUX record
regmap: spmi: Fix regmap_spmi_ext_read in multi-byte case
pinctrl: at91-pio4: fix pull-up/down logic
spi: spi-ti-qspi: Handle truncated frames properly
spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden
spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
ALSA: hda - Fix broken reconfig
ALSA: hda - Fix white noise on Asus UX501VW headset
ALSA: hda - Fix subwoofer pin on ASUS N751 and N551
ALSA: usb-audio: Yet another Phoneix Audio device quirk
ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
crypto: testmgr - Use kmalloc memory for RSA input
crypto: hash - Fix page length clamping in hash walk
crypto: qat - fix invalid pf2vf_resp_wq logic
s390/mm: fix asce_bits handling with dynamic pagetable levels
zsmalloc: fix zs_can_compact() integer overflow
ocfs2: fix posix_acl_create deadlock
ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang
net/route: enforce hoplimit max value
tcp: refresh skb timestamp at retransmit time
net: thunderx: avoid exposing kernel stack
net: fix a kernel infoleak in x25 module
uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h MIME-Version: 1.0
bridge: fix igmp / mld query parsing
net: bridge: fix old ioctl unlocked net device walk
VSOCK: do not disconnect socket when peer has shutdown SEND only
net/mlx4_en: Fix endianness bug in IPV6 csum calculation
net: fix infoleak in rtnetlink
net: fix infoleak in llc
net: fec: only clear a queue's work bit if the queue was emptied
netem: Segment GSO packets on enqueue
sch_dsmark: update backlog as well
sch_htb: update backlog as well
net_sched: update hierarchical backlog too
net_sched: introduce qdisc_replace() helper
gre: do not pull header in ICMP error processing
net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
samples/bpf: fix trace_output example
bpf: fix check_map_func_compatibility logic
bpf: fix refcnt overflow
bpf: fix double-fdput in replace_map_fd_with_map_ptr()
net/mlx4_en: fix spurious timestamping callbacks
ipv4/fib: don't warn when primary address is missing if in_dev is dead
net/mlx5e: Fix minimum MTU
net/mlx5e: Device's mtu field is u16 and not int
openvswitch: use flow protocol when recalculating ipv6 checksums
atl2: Disable unimplemented scatter/gather feature
vlan: pull on __vlan_insert_tag error path and fix csum correction
net: use skb_postpush_rcsum instead of own implementations
cdc_mbim: apply "NDP to end" quirk to all Huawei devices
bpf/verifier: reject invalid LD_ABS | BPF_DW instruction
net: sched: do not requeue a NULL skb
packet: fix heap info leak in PACKET_DIAG_MCLIST sock_diag interface
route: do not cache fib route info on local routes with oif
decnet: Do not build routes to devices without decnet private data.
parisc: Use generic extable search and sort routines
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: mm: treat memstart_addr as a signed quantity
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: consistently use p?d_set_huge
arm64: fix KASLR boot-time I-cache maintenance
arm64: hugetlb: partial revert of 66b3923a1a0f
arm64: make irq_stack_ptr more robust
arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
efi: stub: use high allocation for converted command line
efi: stub: add implementation of efi_random_alloc()
efi: stub: implement efi_get_random_bytes() based on EFI_RNG_PROTOCOL
arm64: kaslr: randomize the linear region
arm64: add support for kernel ASLR
arm64: add support for building vmlinux as a relocatable PIE binary
arm64: switch to relative exception tables
extable: add support for relative extables to search and sort routines
scripts/sortextable: add support for ET_DYN binaries
arm64: futex.h: Add missing PAN toggling
arm64: make asm/elf.h available to asm files
arm64: avoid dynamic relocations in early boot code
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields
arm64: add support for module PLTs
arm64: move brk immediate argument definitions to separate header
arm64: mm: use bit ops rather than arithmetic in pa/va translations
arm64: mm: only perform memstart_addr sanity check if DEBUG_VM
arm64: User die() instead of panic() in do_page_fault()
arm64: allow kernel Image to be loaded anywhere in physical memory
arm64: defer __va translation of initrd_start and initrd_end
arm64: move kernel image to base of vmalloc area
arm64: kvm: deal with kernel symbols outside of linear mapping
arm64: decouple early fixmap init from linear mapping
arm64: pgtable: implement static [pte|pmd|pud]_offset variants
arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region
arm64: add support for ioremap() block mappings
arm64: prevent potential circular header dependencies in asm/bug.h
of/fdt: factor out assignment of initrd_start/initrd_end
of/fdt: make memblock minimum physical address arch configurable
arm64: Remove the get_thread_info() function
arm64: kernel: Don't toggle PAN on systems with UAO
arm64: cpufeature: Test 'matches' pointer to find the end of the list
arm64: kernel: Add support for User Access Override
arm64: add ARMv8.2 id_aa64mmfr2 boiler plate
arm64: cpufeature: Change read_cpuid() to use sysreg's mrs_s macro
arm64: use local label prefixes for __reg_num symbols
arm64: vdso: Mark vDSO code as read-only
arm64: ubsan: select ARCH_HAS_UBSAN_SANITIZE_ALL
arm64: ptdump: Indicate whether memory should be faulting
arm64: Add support for ARCH_SUPPORTS_DEBUG_PAGEALLOC
arm64: Drop alloc function from create_mapping
arm64: prefetch: add missing #include for spin_lock_prefetch
arm64: lib: patch in prfm for copy_page if requested
arm64: lib: improve copy_page to deal with 128 bytes at a time
arm64: prefetch: add alternative pattern for CPUs without a prefetcher
arm64: prefetch: don't provide spin_lock_prefetch with LSE
arm64: allow vmalloc regions to be set with set_memory_*
arm64: kernel: implement ACPI parking protocol
arm64: mm: create new fine-grained mappings at boot
arm64: ensure _stext and _etext are page-aligned
arm64: mm: allow passing a pgdir to alloc_init_*
arm64: mm: allocate pagetables anywhere
arm64: mm: use fixmap when creating page tables
arm64: mm: add functions to walk tables in fixmap
arm64: mm: add __{pud,pgd}_populate
arm64: mm: avoid redundant __pa(__va(x))
arm64: mm: add functions to walk page tables by PA
arm64: mm: move pte_* macros
arm64: kasan: avoid TLB conflicts
arm64: mm: add code to safely replace TTBR1_EL1
arm64: add function to install the idmap
arm64: unmap idmap earlier
arm64: unify idmap removal
arm64: mm: place empty_zero_page in bss
arm64: mm: specialise pagetable allocators
asm-generic: Fix local variable shadow in __set_fixmap_offset
Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules
arm64: Fix an enum typo in mm/dump.c
arm64: kasan: ensure that the KASAN zero page is mapped read-only
arch/arm64/include/asm/pgtable.h: add pmd_mkclean for THP
arm64: hide __efistub_ aliases from kallsyms
Linux 4.4.10
drm/i915/skl: Fix DMC load on Skylake J0 and K0
lib/test-string_helpers.c: fix and improve string_get_size() tests
ACPI / processor: Request native thermal interrupt handling via _OSC
drm/i915: Fake HDMI live status
drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
drm/i915: Fix eDP low vswing for Broadwell
drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
drm/radeon: make sure vertical front porch is at least 1
iio: ak8975: fix maybe-uninitialized warning
iio: ak8975: Fix NULL pointer exception on early interrupt
drm/amdgpu: set metadata pointer to NULL after freeing.
drm/amdgpu: make sure vertical front porch is at least 1
gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
nvmem: mxs-ocotp: fix buffer overflow in read
USB: serial: cp210x: add Straizona Focusers device ids
USB: serial: cp210x: add ID for Link ECU
ata: ahci-platform: Add ports-implemented DT bindings.
libahci: save port map for forced port map
powerpc: Fix bad inline asm constraint in create_zero_mask()
ACPICA: Dispatcher: Update thread ID for recursive method calls
x86/sysfb_efi: Fix valid BAR address range check
ARC: Add missing io barriers to io{read,write}{16,32}be()
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
propogate_mnt: Handle the first propogated copy being a slave
fs/pnode.c: treat zero mnt_group_id-s as unequal
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
MAINTAINERS: Remove asterisk from EFI directory names
writeback: Fix performance regression in wb_over_bg_thresh()
batman-adv: Reduce refcnt of removed router when updating route
batman-adv: Fix broadcast/ogm queue limit on a removed interface
batman-adv: Check skb size before using encapsulated ETH+VLAN header
batman-adv: fix DAT candidate selection (must use vid)
mm: update min_free_kbytes from khugepaged after core initialization
proc: prevent accessing /proc/<PID>/environ until it's ready
Input: zforce_ts - fix dual touch recognition
HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk
HID: wacom: Add support for DTK-1651
xen/evtchn: fix ring resize when binding new events
xen/balloon: Fix crash when ballooning on x86 32 bit PAE
xen: Fix page <-> pfn conversion on 32 bit systems
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
mm/zswap: provide unique zpool name
mm, cma: prevent nr_isolated_* counters from going negative
Minimal fix-up of bad hashing behavior of hash_64()
MD: make bio mergeable
tracing: Don't display trigger file for events that can't be enabled
mac80211: fix statistics leak if dev_alloc_name() fails
ath9k: ar5008_hw_cmn_spur_mitigate: add missing mask_m & mask_p initialisation
lpfc: fix misleading indentation
clk: qcom: msm8960: Fix ce3_src register offset
clk: versatile: sp810: support reentrance
clk: qcom: msm8960: fix ce3_core clk enable register
clk: meson: Fix meson_clk_register_clks() signature type mismatch
clk: rockchip: free memory in error cases when registering clock branches
soc: rockchip: power-domain: fix err handle while probing
clk-divider: make sure read-only dividers do not write to their register
CNS3xxx: Fix PCI cns3xxx_write_config()
mwifiex: fix corner case association failure
ata: ahci_xgene: dereferencing uninitialized pointer in probe
nbd: ratelimit error msgs after socket close
mfd: intel-lpss: Remove clock tree on error path
ipvs: drop first packet to redirect conntrack
ipvs: correct initial offset of Call-ID header search in SIP persistence engine
ipvs: handle ip_vs_fill_iph_skb_off failure
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
Revert: "powerpc/tm: Check for already reclaimed tasks"
arm64: head.S: use memset to clear BSS
efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
arm64: entry: remove pointless SPSR mode check
arm64: mm: move pgd_cache initialisation to pgtable_cache_init
arm64: module: avoid undefined shift behavior in reloc_data()
arm64: module: fix relocation of movz instruction with negative immediate
arm64: traps: address fallout from printk -> pr_* conversion
arm64: ftrace: fix a stack tracer's output under function graph tracer
arm64: pass a task parameter to unwind_frame()
arm64: ftrace: modify a stack frame in a safe way
arm64: remove irq_count and do_softirq_own_stack()
arm64: hugetlb: add support for PTE contiguous bit
arm64: Use PoU cache instr for I/D coherency
arm64: Defer dcache flush in __cpu_copy_user_page
arm64: reduce stack use in irq_handler
arm64: Documentation: add list of software workarounds for errata
arm64: mm: place __cpu_setup in .text
arm64: cmpxchg: Don't incldue linux/mmdebug.h
arm64: mm: fold alternatives into .init
arm64: Remove redundant padding from linker script
arm64: mm: remove pointless PAGE_MASKing
arm64: don't call C code with el0's fp register
arm64: when walking onto the task stack, check sp & fp are in current->stack
arm64: Add this_cpu_ptr() assembler macro for use in entry.S
arm64: irq: fix walking from irq stack to task stack
arm64: Add do_softirq_own_stack() and enable irq_stacks
arm64: Modify stack trace and dump for use with irq_stack
arm64: Store struct thread_info in sp_el0
arm64: Add trace_hardirqs_off annotation in ret_to_user
arm64: ftrace: fix the comments for ftrace_modify_code
arm64: ftrace: stop using kstop_machine to enable/disable tracing
arm64: spinlock: serialise spin_unlock_wait against concurrent lockers
arm64: enable HAVE_IRQ_TIME_ACCOUNTING
arm64: fix COMPAT_SHMLBA definition for large pages
arm64: add __init/__initdata section marker to some functions/variables
arm64: pgtable: implement pte_accessible()
arm64: mm: allow sections for unaligned bases
arm64: mm: detect bad __create_mapping uses
Linux 4.4.9
extcon: max77843: Use correct size for reading the interrupt register
stm class: Select CONFIG_SRCU
megaraid_sas: add missing curly braces in ioctl handler
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
thermal: rockchip: fix a impossible condition caused by the warning
unbreak allmodconfig KCONFIG_ALLCONFIG=...
jme: Fix device PM wakeup API usage
jme: Do not enable NIC WoL functions on S0
bus: imx-weim: Take the 'status' property value into account
ARM: dts: pxa: fix dma engine node to pxa3xx-nand
ARM: dts: armada-375: use armada-370-sata for SATA
ARM: EXYNOS: select THERMAL_OF
ARM: prima2: always enable reset controller
ARM: OMAP3: Add cpuidle parameters table for omap3430
ext4: fix races of writeback with punch hole and zero range
ext4: fix races between buffered IO and collapse / insert range
ext4: move unlocked dio protection from ext4_alloc_file_blocks()
ext4: fix races between page faults and hole punching
perf stat: Document --detailed option
perf tools: handle spaces in file names obtained from /proc/pid/maps
perf hists browser: Only offer symbol scripting when a symbol is under the cursor
mtd: nand: Drop mtd.owner requirement in nand_scan
mtd: brcmnand: Fix v7.1 register offsets
mtd: spi-nor: remove micron_quad_enable()
serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
x86/mm/kmmio: Fix mmiotrace for hugepages
perf evlist: Reference count the cpu and thread maps at set_maps()
drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: rx8025: remove rv8803 id
rtc: ds1685: passing bogus values to irq_restore
rtc: vr41xx: Wire up alarm_irq_enable
rtc: hym8563: fix invalid year calculation
PM / Domains: Fix removal of a subdomain
PM / OPP: Initialize u_volt_min/max to a valid value
misc: mic/scif: fix wrap around tests
misc/bmp085: Enable building as a module
lib/mpi: Endianness fix
fbdev: da8xx-fb: fix videomodes of lcd panels
scsi_dh: force modular build if SCSI is a module
paride: make 'verbose' parameter an 'int' again
regulator: s5m8767: fix get_register() error handling
irqchip/mxs: Fix error check of of_io_request_and_map()
irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
spi/rockchip: Make sure spi clk is on in rockchip_spi_set_cs
locking/mcs: Fix mcs_spin_lock() ordering
regulator: core: Fix nested locking of supplies
regulator: core: Ensure we lock all regulators
regulator: core: fix regulator_lock_supply regression
Revert "regulator: core: Fix nested locking of supplies"
videobuf2-v4l2: Verify planes array in buffer dequeueing
videobuf2-core: Check user space planes array in dqbuf
USB: usbip: fix potential out-of-bounds write
cgroup: make sure a parent css isn't freed before its children
mm/hwpoison: fix wrong num_poisoned_pages accounting
mm: vmscan: reclaim highmem zone if buffer_heads is over limit
numa: fix /proc/<pid>/numa_maps for THP
mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
memcg: relocate charge moving from ->attach to ->post_attach
cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback
slub: clean up code for kmem cgroup support to kmem_cache_free_bulk
workqueue: fix ghost PENDING flag while doing MQ IO
x86/apic: Handle zero vector gracefully in clear_vector_irq()
efi: Expose non-blocking set_variable() wrapper to efivars
efi: Fix out-of-bounds read in variable_matches()
IB/security: Restrict use of the write() interface
IB/mlx5: Expose correct max_sge_rd limit
cxl: Keep IRQ mappings on context teardown
v4l2-dv-timings.h: fix polarity for 4k formats
vb2-memops: Fix over allocation of frame vectors
ASoC: rt5640: Correct the digital interface data select
ASoC: dapm: Make sure we have a card when displaying component widgets
ASoC: ssm4567: Reset device before regcache_sync()
ASoC: s3c24xx: use const snd_soc_component_driver pointer
EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
toshiba_acpi: Fix regression caused by hotkey enabling value
i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
i2c: cpm: Fix build break due to incompatible pointer types
perf intel-pt: Fix segfault tracing transactions
drm/i915: Use fw_domains_put_with_fifo() on HSW
drm/i915: Fixup the free space logic in ring_prepare
drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
drm/i915: Cleanup phys status page too
pwm: brcmstb: Fix check of devm_ioremap_resource() return code
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
drm/dp/mst: Restore primary hub guid on resume
drm/dp/mst: Validate port in drm_dp_payload_send_msg()
drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries
drm: Loongson-3 doesn't fully support wc memory
drm/radeon: fix vertical bars appear on monitor (v2)
drm/radeon: forbid mapping of userptr bo through radeon device file
drm/radeon: fix initial connector audio value
drm/radeon: add a quirk for a XFX R9 270X
drm/amdgpu: fix regression on CIK (v2)
amdgpu/uvd: add uvd fw version for amdgpu
drm/amdgpu: bump the afmt limit for CZ, ST, Polaris
drm/amdgpu: use defines for CRTCs and AMFT blocks
drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work.
iommu/dma: Restore scatterlist offsets correctly
iommu/amd: Fix checking of pci dma aliases
pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce
xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay
Input: gtco - fix crash on detecting device without endpoints
netlink: don't send NETLINK_URELEASE for unbound sockets
nl80211: check netlink protocol in socket release notification
powerpc: Update TM user feature bits in scan_features()
powerpc: Update cpu_user_features2 in scan_features()
powerpc: scan_features() updates incorrect bits for REAL_LE
crypto: talitos - fix AEAD tcrypt tests
crypto: talitos - fix crash in talitos_cra_init()
crypto: sha1-mb - use corrcet pointer while completing jobs
crypto: ccp - Prevent information leakage on export
iwlwifi: mvm: fix memory leak in paging
iwlwifi: pcie: lower the debug level for RSA semaphore access
s390/pci: add extra padding to function measurement block
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control"
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/qxl: fix cursor position with non-zero hotspot
drm/nouveau/core: use vzalloc for allocating ramht
futex: Acknowledge a new waiter in counter before plist
futex: Handle unlock_pi race gracefully
asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic()
ALSA: hda - Add dock support for ThinkPad X260
ALSA: pcxhr: Fix missing mutex unlock
ALSA: hda - add PCI ID for Intel Broxton-T
ALSA: hda - Keep powering up ADCs on Cirrus codecs
ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m
ALSA: hda - Don't trust the reported actual power state
x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address
x86/mm/xen: Suppress hugetlbfs in PV guests
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings
sched/cgroup: Fix/cleanup cgroup teardown/init
dmaengine: pxa_dma: fix the maximum requestor line
dmaengine: hsu: correct use of channel status register
dmaengine: dw: fix master selection
debugfs: Make automount point inodes permanently empty
lib: lz4: fixed zram with lz4 on big endian machines
dm cache metadata: fix cmd_read_lock() acquiring write lock
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
usb: gadget: f_fs: Fix use-after-free
usb: hcd: out of bounds access in for_each_companion
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
assoc_array: don't call compare_object() on a node
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
ARM: mvebu: Correct unit address for linksys
ARM: dts: AM43x-epos: Fix clk parent for synctimer
KVM: arm/arm64: Handle forward time correction gracefully
kvm: x86: do not leak guest xcr0 into host interrupt handlers
x86/mce: Avoid using object after free in genpool
block: loop: fix filesystem corruption in case of aio/dio
block: partition: initialize percpuref before sending out KOBJ_ADD
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/cputype.h
arch/arm64/include/asm/hardirq.h
arch/arm64/include/asm/irq.h
arch/arm64/kernel/cpu_errata.c
arch/arm64/kernel/cpuinfo.c
arch/arm64/kernel/setup.c
arch/arm64/kernel/smp.c
arch/arm64/kernel/stacktrace.c
arch/arm64/mm/init.c
arch/arm64/mm/mmu.c
arch/arm64/mm/pageattr.c
mm/memcontrol.c
CRs-Fixed: 1054234
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Change-Id: I2a7a34631ffee36ce18b9171f16d023be777392f
In soundwire read/write commands, register value is defined
as 8 bit but it is accessed through 32 bit pointer which
may cause out of boundary memory access. Fix this issue by
typecast appropriately.
BUG: KASan: out of bounds access in swrm_read+0x1dc/0x30c at
addr ffffffc089871880
Write of size 4 by task kworker/u8:5/236
==addr ffffffc089871880
[<ffffffc00081d174>] swrm_read+0x1d8/0x30c
[<ffffffc000819808>] swr_read+0x5c/0x74
[<ffffffc000741e58>] regmap_swr_read+0xd8/0x11c
[<ffffffc00073a350>] _regmap_raw_read+0x210/0x314
[<ffffffc00073a4b0>] _regmap_bus_read+0x5c/0xb4
[<ffffffc000739548>] _regmap_read+0xe0/0x1ec
[<ffffffc0007396b8>] regmap_read+0x64/0xa8
[<ffffffc000dc9dd4>] snd_soc_component_read+0x34/0x70
[<ffffffc000dc9f44>] snd_soc_read+0x6c/0x94
Memory state around the buggy address:
ffffffc089871780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc089871800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Change-Id: I3c56dffb4ca197e8fc23d54a44282a60254dd001
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
commit 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 upstream.
Modules which register drivers via standard path (driver_register) in
parallel can cause a warning:
WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
sysfs: cannot create duplicate filename '/module/saa7146/drivers'
Modules linked in: hexium_gemini(+) mxb(+) ...
...
Call Trace:
...
[<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80
[<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90
[<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340
[<ffffffff8140f5b8>] kobject_add+0x68/0xb0
[<ffffffff8140f631>] kobject_create_and_add+0x31/0x70
[<ffffffff8157a703>] module_add_driver+0xc3/0xd0
[<ffffffff8155e5d4>] bus_add_driver+0x154/0x280
[<ffffffff815604c0>] driver_register+0x60/0xe0
[<ffffffff8145bed0>] __pci_register_driver+0x60/0x70
[<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146]
[<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini]
...
As can be (mostly) seen, driver_register causes this call sequence:
-> bus_add_driver
-> module_add_driver
-> module_create_drivers_dir
The last one creates "drivers" directory in /sys/module/<...>. When
this is done in parallel, the directory is attempted to be created
twice at the same time.
This can be easily reproduced by loading mxb and hexium_gemini in
parallel:
while :; do
modprobe mxb &
modprobe hexium_gemini
wait
rmmod mxb hexium_gemini saa7146_vv saa7146
done
saa7146 calls pci_register_driver for both mxb and hexium_gemini,
which means /sys/module/saa7146/drivers is to be created for both of
them.
Fix this by a new mutex in module_create_drivers_dir which makes the
test-and-create "drivers" dir atomic.
I inverted the condition and removed 'return' to avoid multiple
unlocks or a goto.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: fe480a2675 (Modules: only add drivers/ direcory if needed)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* msm-4.4/tmp-2bf7955:
Linux 4.4.8
Revert "usb: hub: do not clear BOS field during reset device"
usbvision: fix crash on detecting device with invalid configuration
staging: android: ion: Set the length of the DMA sg entries in buffer
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"
HID: usbhid: fix inconsistent reset/resume/reset-resume behavior
HID: wacom: fix Bamboo ONE oops
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: hda - fix front mic problem for a HP desktop
ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
perf: Cure event->pending_disable race
perf: Do not double free
arm64: replace read_lock to rcu lock in call_step_hook
Btrfs: fix file/data loss caused by fsync after rename and new inode
iommu: Don't overwrite domain pointer when there is no default_domain
ext4: ignore quota mount options if the quota feature is enabled
ext4: add lockdep annotations for i_data_sem
btrfs: fix crash/invalid memory access on fsync when using overlayfs
nfs: use file_dentry()
fs: add file_dentry()
sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes
iio: gyro: bmg160: fix endianness when reading axes
iio: gyro: bmg160: fix buffer read values
iio: accel: bmc150: fix endianness when reading axes
iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE
usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()
usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()
mac80211: fix txq queue related crashes
mac80211: fix unnecessary frame drops in mesh fwding
mac80211: fix ibss scan parameters
mac80211: avoid excessive stack usage in sta_info
mac80211: properly deal with station hashtable insert errors
virtio: virtio 1.0 cs04 spec compliance for reset
rbd: use GFP_NOIO consistently for request allocations
pcmcia: db1xxx_ss: fix last irq_to_gpio user
v4l: vsp1: Set the SRU CTRL0 register when starting the stream
coda: fix error path in case of missing pdata on non-DT platform
au0828: Fix dev_state handling
au0828: fix au0828_v4l2_close() dev_state race condition
pinctrl: freescale: imx: fix bogus check of of_iomap() return value
pinctrl: nomadik: fix pull debug print inversion
pinctrl: sunxi: Fix A33 external interrupts not working
pinctrl: sh-pfc: only use dummy states for non-DT platforms
pinctrl: pistachio: fix mfio84-89 function description and pinmux.
MIPS: Fix MSA ld unaligned failure cases
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: x86: Inject pending interrupt even if pending nmi exist
cdc-acm: fix NULL pointer reference
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
mpls: find_outdev: check for err ptr in addition to NULL check
ipv6: Count in extension headers in skb->network_header
ip6_tunnel: set rtnl_link_ops before calling register_netdevice
ipv6: l2tp: fix a potential issue in l2tp_ip6_recv
ipv4: l2tp: fix a potential issue in l2tp_ip_recv
tuntap: restore default qdisc
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
rtnl: fix msg size calculation in if_nlmsg_size()
bridge: Allow set bridge ageing time when switchdev disabled
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
qmi_wwan: add "D-Link DWM-221 B1" device id
xfrm: Fix crash observed during device unregistration and decryption
ppp: take reference on channels netns
ipv4: initialize flowi4_flags before calling fib_lookup()
ipv4: fix broadcast packets reception
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
qlge: Fix receive packets drop.
tcp/dccp: remove obsolete WARN_ON() in icmp handlers
ppp: ensure file->private_data can't be overridden
ath9k: fix buffer overrun for ar9287
farsync: fix off-by-one bug in fst_add_one
mlx4: add missing braces in verify_qp_parameters
net: Fix use after free in the recvmmsg exit path
ipv4: Don't do expensive useless work during inetdev destroy.
bridge: allow zero ageing time
rocker: set FDB cleanup timer according to lowest ageing time
mlxsw: spectrum: Check requested ageing time is valid
macvtap: always pass ethernet header in linear
qlcnic: Fix mailbox completion handling during spurious interrupt
qlcnic: Remove unnecessary usage of atomic_t
sh_eth: advance 'rxdesc' later in sh_eth_ring_format()
sh_eth: fix NULL pointer dereference in sh_eth_ring_format()
bpf: avoid copying junk bytes in bpf_get_current_comm()
packet: validate variable length ll headers
ax25: add link layer header validation function
net: validate variable length ll headers
ppp: release rtnl mutex when interface creation fails
tcp: fix tcpi_segs_in after connection establishment
udp6: fix UDP/IPv6 encap resubmit path
usbnet: cleanup after bind() in probe()
cdc_ncm: toggle altsetting to force reset before setup
vxlan: fix missing options_len update on RX with collect metadata
ipv6: re-enable fragment header matching in ipv6_find_hdr
qmi_wwan: add Sierra Wireless EM74xx device ID
tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"
mld, igmp: Fix reserved tailroom calculation
sctp: lack the check for ports in sctp_v6_cmp_addr
net: fix bridge multicast packet checksum validation
net: qca_spi: clear IFF_TX_SKB_SHARING
net: qca_spi: Don't clear IFF_BROADCAST
net: vrf: Remove direct access to skb->data
net: jme: fix suspend/resume on JMC260
ipv4: only create late gso-skb if skb is already set up with CHECKSUM_PARTIAL
tunnel: Clear IPCB(skb)->opt before dst_link_failure called
tcp: convert cached rtt from usec to jiffies when feeding initial rto
xen/events: Mask a moving irq
drm/amdgpu/gmc: use proper register for vram type on Fiji
drm/amdgpu/gmc: move vram type fetching into sw_init
drm/radeon: add a dpm quirk for all R7 370 parts
drm/radeon: add another R7 370 quirk
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5
drm/udl: Use unlocked gem unreferencing
drm/dp: move hw_mutex up the call stack
arm64: opcodes.h: Add arm big-endian config options before including arm header
compiler-gcc: disable -ftracer for __noclone functions
libnvdimm, pfn: fix uuid validation
libnvdimm: fix smart data retrieval
powerpc/mm: Fixup preempt underflow with huge pages
mm: fix invalid node in alloc_migrate_target()
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: Use mod_timer() for rearming the system timer
parisc: Unbreak handling exceptions from kernel modules
parisc: Fix kernel crash with reversed copy_from_user()
parisc: Avoid function pointers for kernel exception routines
PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated
Linux 4.4.7
perf/x86/intel: Fix PEBS data source interpretation on Nehalem/Westmere
perf/x86/intel: Use PAGE_SIZE for PEBS buffer size on Core2
perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi
perf/x86/pebs: Add workaround for broken OVFL status on HSW+
sched/cputime: Fix steal time accounting vs. CPU hotplug
scsi_common: do not clobber fixed sense information
PM / sleep: Clear pm_suspend_global_flags upon hibernate
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
mtd: onenand: fix deadlock in onenand_block_markbad
mm/page_alloc: prevent merging between isolated and other pageblocks
ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list
ocfs2/dlm: fix race between convert and recovery
Input: ati_remote2 - fix crashes on detecting device with invalid descriptor
Input: ims-pcu - sanity check against missing interfaces
Input: synaptics - handle spurious release of trackstick buttons, again
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
ACPI / PM: Runtime resume devices when waking from hibernate
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
nfsd: fix deadlock secinfo+readdir compound
nfsd4: fix bad bounds checking
iser-target: Rework connection termination
iser-target: Separate flows for np listeners and connections cma events
iser-target: Add new state ISER_CONN_BOUND to isert_conn
iser-target: Fix identification of login rx descriptor type
target: Fix target_release_cmd_kref shutdown comp leak
clk: bcm2835: Fix setting of PLL divider clock rates
clk: rockchip: add hclk_cpubus to the list of rk3188 critical clocks
clk: rockchip: rk3368: fix hdmi_cec gate-register
clk: rockchip: rk3368: fix parents of video encoder/decoder
clk: rockchip: rk3368: fix cpuclk core dividers
clk: rockchip: rk3368: fix cpuclk mux bit of big cpu-cluster
mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
mmc: sdhci: fix data timeout (part 2)
mmc: sdhci: fix data timeout (part 1)
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
mmc: block: fix ABI regression of mmc_blk_ioctl
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
MAINTAINERS: Update mailing list and web page for hwmon subsystem
kbuild/mkspec: fix grub2 installkernel issue
scripts/kconfig: allow building with make 3.80 again
scripts/coccinelle: modernize &
bitops: Do not default to __clear_bit() for __clear_bit_unlock()
tracing: Fix trace_printk() to print when not using bprintk()
tracing: Fix crash from reading trace_pipe with sendfile
tracing: Have preempt(irqs)off trace preempt disabled functions
IB/ipoib: fix for rare multicast join race condition
drm/amdgpu: include the right version of gmc header files for iceland
drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
drm/radeon: disable runtime pm on PX laptops without dGPU power control
iwlwifi: mvm: Fix paging memory leak
ipr: Fix regression when loading firmware
ipr: Fix out-of-bounds null overwrite
rapidio/rionet: fix deadlock on SMP
fs/coredump: prevent fsuid=0 dumps into user-controlled directories
fuse: Add reference counting for fuse_io_priv
fuse: do not use iocb after it may have been freed
md: multipath: don't hardcopy bio in .make_request path
md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_list
raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang
RAID5: revert e9e4c377e2 to fix a livelock
RAID5: check_reshape() shouldn't call mddev_suspend
md/raid5: Compare apples to apples (or sectors to sectors)
raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang
xfs: fix two memory leaks in xfs_attr_list.c error paths
quota: Fix possible GPF due to uninitialised pointers
ARC: bitops: Remove non relevant comments
ARC: [BE] readl()/writel() to work in Big Endian CPU configuration
xtensa: clear all DBREAKC registers on start
xtensa: fix preemption in {clear,copy}_user_highpage
xtensa: ISS: don't hang if stdin EOF is reached
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
of: alloc anywhere from memblock if range not specified
net: mvneta: enable change MAC address when interface is up
cgroup: ignore css_sets associated with dead cgroups during migration
Bluetooth: Fix potential buffer overflow with Add Advertising
Bluetooth: Add new AR3012 ID 0489:e095
watchdog: rc32434_wdt: fix ioctl error handling
watchdog: don't run proc_watchdog_update if new value is same as old
ia64: define ioremap_uc()
mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage
mm: memcontrol: reclaim when shrinking memory.high below usage
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: fix race of writeback thread starting before complete initialization
bcache: cleaned up error handling around register_cache()
IB/srpt: Simplify srpt_handle_tsk_mgmt()
brd: Fix discard request processing
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
tools/hv: Use include/uapi with __EXPORTED_HEADERS__
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: hda - fix the mic mute button and led problem for a Lenovo AIO
ALSA: hda - Don't handle ELD notify from invalid port
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
ALSA: pcm: Avoid "BUG:" string for warnings again
ALSA: hda - Apply reboot D3 fix for CX20724 codec, too
mtip32xx: Cleanup queued requests after surprise removal
mtip32xx: Implement timeout handler
mtip32xx: Handle FTL rebuild failure state during device initialization
mtip32xx: Handle safe removal during IO
mtip32xx: Fix for rmmod crash when drive is in FTL rebuild
mtip32xx: Print exact time when an internal command is interrupted
mtip32xx: Remove unwanted code from taskfile error handler
mtip32xx: Fix broken service thread handling
mtip32xx: Avoid issuing standby immediate cmd during FTL rebuild
media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32
coda: fix first encoded frame payload
bttv: Width must be a multiple of 16 when capturing planar formats
adv7511: TX_EDID_PRESENT is still 1 after a disconnect
saa7134: Fix bytesperline not being set correctly for planar formats
8250: use callbacks to access UART_DLL/UART_DLM
net: irda: Fix use-after-free in irtty_open()
tty: Fix GPF in flush_to_ldisc(), part 2
staging: comedi: ni_mio_common: fix the ni_write[blw]() functions
staging: android: ion_test: fix check of platform_device_register_simple() error code
staging: comedi: ni_tiocmd: change mistaken use of start_src for start_arg
HID: fix hid_ignore_special_drivers module parameter
HID: multitouch: force retrieving of Win8 signature blob
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()
HID: logitech: fix Dual Action gamepad support
tpm: fix the cleanup of struct tpm_chip
tpm_eventlog.c: fix binary_bios_measurements
tpm_crb: tpm2_shutdown() must be called before tpm_chip_unregister()
tpm: fix the rollback in tpm_chip_register()
mei: bus: check if the device is enabled before data transfer
X.509: Fix leap year handling again
crypto: marvell/cesa - forward devm_ioremap_resource() error code
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: keywrap - memzero the correct memory
crypto: ccp - memset request context to zero during import
crypto: ccp - Don't assume export/import areas are aligned
crypto: ccp - Limit the amount of information exported
crypto: ccp - Add hash state import and export support
Bluetooth: btusb: Add a new AR3012 ID 13d3:3472
Bluetooth: btusb: Add a new AR3012 ID 04ca:3014
Bluetooth: btusb: Add new AR3012 ID 13d3:3395
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
ALSA: usb-audio: add Microsoft HD-5001 to quirks
ALSA: usb-audio: Add sanity checks for endpoint accesses
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
Input: powermate - fix oops with malicious USB descriptors
pwc: Add USB id for Philips Spc880nc webcam
USB: option: add "D-Link DWM-221 B1" device id
USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices
USB: serial: cp210x: Adding GE Healthcare Device ID
USB: cypress_m8: add endpoint sanity check
USB: digi_acceleport: do sanity checking for the number of ports
USB: mct_u232: add sanity checking in probe
USB: usb_driver_claim_interface: add sanity checking
USB: iowarrior: fix oops with malicious USB descriptors
USB: cdc-acm: more sanity checking
USB: uas: Reduce can_queue to MAX_CMNDS
usb: hub: fix a typo in hub_port_init() leading to wrong logic
usb: retry reset if a device times out
dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
dm cache: make sure every metadata function checks fail_io
dm thin metadata: don't issue prefetches if a transaction abort has failed
dm: fix excessive dm-mq context switching
dm snapshot: disallow the COW and origin devices from being identical
libnvdimm: Fix security issue with DSM IOCTL.
aic7xxx: Fix queue depth handling
be2iscsi: set the boot_kset pointer to NULL in case of failure
scsi: storvsc: fix SRB_STATUS_ABORTED handling
sd: Fix discard granularity when LBPRZ=1
aacraid: Set correct msix count for EEH recovery
aacraid: Fix memory leak in aac_fib_map_free
aacraid: Fix RRQ overload
sg: fix dxferp in from_to case
x86/mm: TLB_REMOTE_SEND_IPI should count pages
x86/iopl: Fix iopl capability check on Xen PV
x86/iopl/64: Properly context-switch IOPL on Xen PV
x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()
x86/irq: Cure live lock in fixup_irqs()
PCI: ACPI: IA64: fix IO port generic range check
PCI: Disable IO/MEM decoding for devices with non-compliant BARs
pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
s390/pci: enforce fmb page boundary rule
s390/cpumf: add missing lpp magic initialization
s390: fix floating pointer register corruption (again)
EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()
EDAC/sb_edac: Fix computation of channel address
sched/preempt, sh: kmap_coherent relies on disabled preemption
sched/cputime: Fix steal_account_process_tick() to always return jiffies
Thermal: Ignore invalid trip points
perf tools: Fix python extension build
perf tools: Fix checking asprintf return value
perf tools: Dont stop PMU parsing on alias parse error
perf/core: Fix perf_sched_count derailment
KVM: VMX: fix nested vpid for old KVM guests
KVM: VMX: avoid guest hang on invalid invvpid instruction
KVM: VMX: avoid guest hang on invalid invept instruction
KVM: fix spin_lock_init order on x86
KVM: i8254: change PIT discard tick policy
KVM: x86: fix missed hardware breakpoints
x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs
perf/x86/intel: Add definition for PT PMI bit
x86/entry/compat: Keep TS_COMPAT set during signal delivery
x86/microcode: Untangle from BLK_DEV_INITRD
x86/microcode/intel: Make early loader look for builtin microcode too
mmc: sh_mmcif: Correct TX DMA channel allocation
mmc: sh_mmcif: rework dma channel handling
ASoC: samsung: pass DMA channels as pointers
regulator: core: Fix nested locking of supplies
regulator: core: avoid unused variable warning
s390/cpumf: Fix lpp detection
cpufreq: dt: No need to allocate resources anymore
cpufreq: dt: No need to fetch voltage-tolerance
cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()
cpufreq: dt: Unsupported OPPs are already disabled
cpufreq: dt: Pass regulator name to the OPP core
cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well
cpufreq: dt: Rename 'need_update' to 'opp_v1'
cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq-dt: Supply power coefficient when registering cooling devices
PM / OPP: Rename structures for clarity
PM / OPP: Fix incorrect comments
PM / OPP: Initialize regulator pointer to an error value
PM / OPP: Initialize u_volt_min/max to a valid value
PM / OPP: Fix NULL pointer dereference crash when disabling OPPs
PM / OPP: Add dev_pm_opp_set_rate()
PM / OPP: Manage device clk
PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings
PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()
PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
PM / OPP: Disable OPPs that aren't supported by the regulator
PM / OPP: get/put regulators from OPP core
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
PM / OPP: Use snprintf() instead of sprintf()
PM / OPP: Set cpu_dev->id in cpumask first
PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
PM / OPP: Parse 'opp-<prop>-<name>' bindings
PM / OPP: Parse 'opp-supported-hw' binding
PM / OPP: Add missing doc comments
PM / OPP: Rename OPP nodes as opp@<opp-hz>
PM / OPP: Remove 'operating-points-names' binding
PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
PM / OPP: Add "opp-supported-hw" binding
PM / OPP: Add debugfs support
arm64: vdso: Mark vDSO code as read-only
Conflicts:
drivers/staging/android/ion/ion.c
mm/page_alloc.c
CRs-Fixed: 1010239
Change-Id: Id59539cad642885e1e41340cebae4159ba1f7eaf
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
The count debugfs node is used to set the number of registers to read
starting at the given address. Initialize this to 1 so that data will
produce at least one entry if the count is not specified.
Change-Id: Ia0d2f5f0e145a735ab565a4530a17d83f832bb88
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Backport notes: This resolves clk warnings in the designware i2c
driver on HiKey seen during suspend/resume.
Cherrypicked from: aa8e54b559479d0cb7eb632ba443b8cacd20cd4b
If a suitable prepare callback cannot be found for a given device and
its driver has no PM callbacks at all, assume that it can go direct to
complete when the system goes to sleep.
The reason for this is that there's lots of devices in a system that do
no PM at all and there's no reason for them to prevent their ancestors
to do direct_complete if they can support it.
Change-Id: Ia773afb4b266f012336b99fc8cf87453839e078b
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[jstultz: Backported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Backport notes: This resolves clk warnings in the designware i2c
driver on HiKey seen during suspend/resume.
Cherrypicked from: aa8e54b559479d0cb7eb632ba443b8cacd20cd4b
If a suitable prepare callback cannot be found for a given device and
its driver has no PM callbacks at all, assume that it can go direct to
complete when the system goes to sleep.
The reason for this is that there's lots of devices in a system that do
no PM at all and there's no reason for them to prevent their ancestors
to do direct_complete if they can support it.
Change-Id: Ia773afb4b266f012336b99fc8cf87453839e078b
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[jstultz: Backported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
commit 3a17fb329da68cb00558721aff876a80bba2fdb9 upstream.
Grygorii Strashko reports:
The PM runtime will be left disabled for the device if its
.suspend_late() callback fails and async suspend is not allowed
for this device. In this case device will not be added in
dpm_late_early_list and dpm_resume_early() will ignore this
device, as result PM runtime will be disabled for it forever
(side effect: after 8 subsequent failures for the same device
the PM runtime will be reenabled due to disable_depth overflow).
To fix this problem, add devices to dpm_late_early_list regardless
of whether or not device_suspend_late() returns errors for them.
That will ensure failures in there to be handled consistently for
all devices regardless of their async suspend/resume status.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ae3aeefabbeef26294e7a349b51f1c761d46c9f upstream.
As pm_runtime_set_active() may fail because the device's parent isn't
active, we can end up executing the ->runtime_resume() callback for the
device when it isn't allowed.
Fix this by invoking pm_runtime_set_active() before running the callback
and let's also deal with the error code.
Fixes: 37f204164d (PM: Add pm_runtime_suspend|resume_force functions)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of deadlock while doing late
memblock configuration as only preemption is disabled and
irq can be serviced while seqlock is held and in turn
memblock_is_memory can be called from irq context thus
trying to claim seqlock again. Following call stack was
observed,
[<c02136d4>] memblock_search+0x1c
[<c021487c>] memblock_is_memory+0x10
[<c01e4684>] free_kmem_pages+0x44
[<c0121c04>] free_task+0x28
[<c0178b30>] rcu_process_callbacks+0x488
[<c0127e30>] __do_softirq+0x150
[<c0128284>] irq_exit+0x84
[<c010c11c>] handle_IPI+0x12c
[<c0100588>] gic_handle_irq+0x70
[<c0e9efc0>] __irq_svc+0x40
[<c0214a8c>] memblock_region_resize_late_end+0xc
[<c057010c>] removed_alloc+0x110
[<c04ab2c4>] pil_boot+0x2b0
[<c04b7700>] __subsystem_get+0xe0
[<c04b79cc>] subsys_device_open+0x74
[<c0229f20>] chrdev_open+0x12c
[<c02246e4>] do_dentry_open+0x280
[<c0232698>] do_last+0x9a4
[<c0232b8c>] path_openat+0x23c
[<c0233bf0>] do_filp_open+0x2c
Fix it by disabling irqs during late memblock
configuration. It is a one time operation which changes
memblock related data structures and doesn't carry
performance impact.
CRs-Fixed: 1003890
Change-Id: I3ff1894f0c80580920b1971cda357915665b5054
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
The mm subsystem access page structs aligned to
pageblock_nr_pages and assumes that these are valid. We
must not free any memmap entries that it may inspect.
CRs-Fixed: 1000343
Change-Id: I73e0402ee72cad8df307ece1134f9e7304125cf6
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
This reverts commit e1b5d10389.
This patch fixed the aosp commit ad86cc8ad6 (drivers: power:
Add watchdog timer to catch drivers which lockup during suspend.),
which we dropped in Change Id Ic72a87432e27844155467817600adc6cf0c2209c,
so we no longer need this fix. A part of this patch is already reverted
in above mentioned Change Id.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
commit dec8e8f6e6504aa3496c0f7cc10c756bb0e10f44 upstream.
Specifically for the case of reads that use the Extended Register
Read Long command, a multi-byte read operation is broken up into
8-byte chunks. However the call to spmi_ext_register_readl() is
incorrectly passing 'val_size', which if greater than 8 will
always fail. The argument should instead be 'len'.
Fixes: c9afbb05a9 ("regmap: spmi: support base and extended register spaces")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e1b5d10389.
This patch fixed the aosp commit ad86cc8ad6 (drivers: power:
Add watchdog timer to catch drivers which lockup during suspend.),
which we dropped in Change Id Ic72a87432e27844155467817600adc6cf0c2209c,
so we no longer need this fix. A part of this patch is already reverted
in above mentioned Change Id.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
The current method of cat-ing register file dumps the entire
address space. One can use dd command to dump a subrange within
the address space. However one needs to know the string length
of each line which is derived from max address, the character
length of each register entry and the format.
Provide simple means to dump a range by allowing user to specify
the start address and the count of registers. When the data is read
convert the dump address to a starting position in the file. Similarly
if the file offset goes beyond the dump range return 0 to indicate
that the data is already dumped.
Also provide means to write to a register address.
CRs-Fixed: 1001770
Change-Id: I3466ce89007d127151f6760328edad116d679db8
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
commit beda5fc1ff9b527059290a97b672d2ee0eb7b92f upstream.
Commit 30e7a65b3f (PM / Domains: Ensure subdomain is not in use
before removing) added a test to ensure that a subdomain is not a
master to another subdomain or if any devices are using the subdomain
before removing. This change incorrectly used the "slave_links" list to
determine if the subdomain is a master to another subdomain, where it
should have been using the "master_links" list instead. The
"slave_links" list will never be empty for a subdomain and so a
subdomain can never be removed. Fix this by testing if the
"master_links" list is empty instead.
Fixes: 30e7a65b3f (PM / Domains: Ensure subdomain is not in use before removing)
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c88c395f4a6485f23f81e385c79945d68bcd5c5d upstream.
We kept u_volt_min/max initialized to 0, when only the target voltage is
present in DT, instead of the target/min/max triplet.
This didn't go well with the regulator framework, as on few calls the
min voltage was set to target and max was set to 0 and so resulted in a
kernel crash like below:
kernel BUG at ../drivers/regulator/core.c:216!
[<c0684af4>] (regulator_check_voltage) from [<c06857ac>] (regulator_set_voltage_unlocked+0x58/0x230)
[<c06857ac>] (regulator_set_voltage_unlocked) from [<c06859ac>] (regulator_set_voltage+0x28/0x54)
[<c06859ac>] (regulator_set_voltage) from [<c0775b28>] (_set_opp_voltage+0x30/0x98)
[<c0775b28>] (_set_opp_voltage) from [<c0776630>] (dev_pm_opp_set_rate+0xf0/0x28c)
[<c0776630>] (dev_pm_opp_set_rate) from [<c096f784>] (__cpufreq_driver_target+0x184/0x2b4)
[<c096f784>] (__cpufreq_driver_target) from [<c0973760>] (dbs_check_cpu+0x1b0/0x1f4)
[<c0973760>] (dbs_check_cpu) from [<c0973f30>] (cpufreq_governor_dbs+0x324/0x5c4)
[<c0973f30>] (cpufreq_governor_dbs) from [<c0970958>] (__cpufreq_governor+0xe4/0x1ec)
[<c0970958>] (__cpufreq_governor) from [<c09711e0>] (cpufreq_init_policy+0x64/0x8c)
[<c09711e0>] (cpufreq_init_policy) from [<c09718cc>] (cpufreq_online+0x2fc/0x708)
[<c09718cc>] (cpufreq_online) from [<c0765ff0>] (subsys_interface_register+0x94/0xd8)
[<c0765ff0>] (subsys_interface_register) from [<c0970530>] (cpufreq_register_driver+0x14c/0x19c)
[<c0970530>] (cpufreq_register_driver) from [<c09746dc>] (dt_cpufreq_probe+0x70/0xec)
[<c09746dc>] (dt_cpufreq_probe) from [<c076907c>] (platform_drv_probe+0x4c/0xb0)
[<c076907c>] (platform_drv_probe) from [<c07678e0>] (driver_probe_device+0x214/0x2c0)
[<c07678e0>] (driver_probe_device) from [<c0767a18>] (__driver_attach+0x8c/0x90)
[<c0767a18>] (__driver_attach) from [<c0765c2c>] (bus_for_each_dev+0x68/0x9c)
[<c0765c2c>] (bus_for_each_dev) from [<c0766d78>] (bus_add_driver+0x1a0/0x218)
[<c0766d78>] (bus_add_driver) from [<c076810c>] (driver_register+0x78/0xf8)
[<c076810c>] (driver_register) from [<c0301d74>] (do_one_initcall+0x90/0x1d8)
[<c0301d74>] (do_one_initcall) from [<c1100e14>] (kernel_init_freeable+0x15c/0x1fc)
[<c1100e14>] (kernel_init_freeable) from [<c0b27a0c>] (kernel_init+0x8/0xf0)
[<c0b27a0c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2)
Fix that by initializing u_volt_min/max to the target voltage in such cases.
Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 274659029c (PM / OPP: Add support to parse "operating-points-v2" bindings)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Specifically for the case of reads that use the Extended Register
Read Long command, a multi-byte read operation is broken up into
8-byte chunks. However the call to spmi_ext_register_readl() is
incorrectly passing 'val_size', which if greater than 8 will
always fail. The argument should instead be 'len'.
CRs-Fixed: 1002440
Change-Id: I2eb9f1e11f97cf7eeee4314616bc5d06443c8920
Fixes: c9afbb05a9 ("regmap: spmi: support base and extended register spaces")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Stephen pointed out recently, that few structures always confuse him as
they aren't named properly. And this patch tries to address that:
Names are updated as:
- device_opp or dev_opp -> opp_table
- dev_opp_list -> opp_tables
- dev_opp_list_lock -> opp_table_lock
- device_list_opp -> opp_device (it was never a list, but a structure)
- list_dev -> opp_dev
- And similar changes in comments and function names as well.
This also fixes checkpatch warnings that were generated with this patch.
No functional changes.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 2c2709dc6921c5d246b686521f932c73a20f428f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Some comments were just copy/pasted from other sections and don't match
to the routines they were added for. Fix them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit a5da64477ee79efa748df256928ec8840a2a7986)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
We are currently required to do two checks for regulator pointer:
IS_ERR() and IS_NULL().
And multiple instances are reported, about both of these not being used
consistently and so resulting in crashes.
Fix that by initializing regulator pointer with an error value and
checking it only against an error.
This makes code more consistent and more efficient.
Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator)
Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Initialize to -ENXIO ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 0c717d0f9cb46259dce5272705adce64a2d646d9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
We kept u_volt_min/max initialized to 0, when only the target voltage is
present in DT, instead of the target/min/max triplet.
This didn't go well with the regulator framework, as on few calls the
min voltage was set to target and max was set to 0 and so resulted in a
kernel crash like below:
kernel BUG at ../drivers/regulator/core.c:216!
[<c0684af4>] (regulator_check_voltage) from [<c06857ac>] (regulator_set_voltage_unlocked+0x58/0x230)
[<c06857ac>] (regulator_set_voltage_unlocked) from [<c06859ac>] (regulator_set_voltage+0x28/0x54)
[<c06859ac>] (regulator_set_voltage) from [<c0775b28>] (_set_opp_voltage+0x30/0x98)
[<c0775b28>] (_set_opp_voltage) from [<c0776630>] (dev_pm_opp_set_rate+0xf0/0x28c)
[<c0776630>] (dev_pm_opp_set_rate) from [<c096f784>] (__cpufreq_driver_target+0x184/0x2b4)
[<c096f784>] (__cpufreq_driver_target) from [<c0973760>] (dbs_check_cpu+0x1b0/0x1f4)
[<c0973760>] (dbs_check_cpu) from [<c0973f30>] (cpufreq_governor_dbs+0x324/0x5c4)
[<c0973f30>] (cpufreq_governor_dbs) from [<c0970958>] (__cpufreq_governor+0xe4/0x1ec)
[<c0970958>] (__cpufreq_governor) from [<c09711e0>] (cpufreq_init_policy+0x64/0x8c)
[<c09711e0>] (cpufreq_init_policy) from [<c09718cc>] (cpufreq_online+0x2fc/0x708)
[<c09718cc>] (cpufreq_online) from [<c0765ff0>] (subsys_interface_register+0x94/0xd8)
[<c0765ff0>] (subsys_interface_register) from [<c0970530>] (cpufreq_register_driver+0x14c/0x19c)
[<c0970530>] (cpufreq_register_driver) from [<c09746dc>] (dt_cpufreq_probe+0x70/0xec)
[<c09746dc>] (dt_cpufreq_probe) from [<c076907c>] (platform_drv_probe+0x4c/0xb0)
[<c076907c>] (platform_drv_probe) from [<c07678e0>] (driver_probe_device+0x214/0x2c0)
[<c07678e0>] (driver_probe_device) from [<c0767a18>] (__driver_attach+0x8c/0x90)
[<c0767a18>] (__driver_attach) from [<c0765c2c>] (bus_for_each_dev+0x68/0x9c)
[<c0765c2c>] (bus_for_each_dev) from [<c0766d78>] (bus_add_driver+0x1a0/0x218)
[<c0766d78>] (bus_add_driver) from [<c076810c>] (driver_register+0x78/0xf8)
[<c076810c>] (driver_register) from [<c0301d74>] (do_one_initcall+0x90/0x1d8)
[<c0301d74>] (do_one_initcall) from [<c1100e14>] (kernel_init_freeable+0x15c/0x1fc)
[<c1100e14>] (kernel_init_freeable) from [<c0b27a0c>] (kernel_init+0x8/0xf0)
[<c0b27a0c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2)
Fix that by initializing u_volt_min/max to the target voltage in such cases.
Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 274659029c (PM / OPP: Add support to parse "operating-points-v2" bindings)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit c88c395f4a6485f23f81e385c79945d68bcd5c5d)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by
the regulator) causes a crash to happen on Tegra124 Jetson TK1 when
using the DFLL clock source for the CPU. The DFLL manages the voltage
itself and so there is no regulator specified for the OPPs and so we
get a crash when we try to dereference the regulator pointer. Fix
this by checking to see if the regulator IS_ERR_OR_NULL before
dereferencing it.
Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator)
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 78ecc56247f0ec2bc0cf6f2f2af69e98d99767bc)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
power-supply and clock source for an OPP.
The OPP is found by matching against the target_freq passed to the
routine. This shall replace similar code present in most of the OPP
users and help simplify them a lot.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 6a0712f6f199e737aa5913d28ec4bd3a25de9660)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
OPP core has got almost everything now to manage device's OPP
transitions, the only thing left is device's clk. Get that as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d54974c2513f487e9e70fbdc79c5da51c53e23da)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
V2 bindings have better support for clock-latency and voltage-tolerance
and doesn't need special care. To use callbacks, like
dev_pm_opp_get_max_{transition|volt}_latency(), irrespective of the
bindings, the core needs to know clock-latency/voltage-tolerance for the
earlier bindings.
This patch reads clock-latency/voltage-tolerance from the device node,
irrespective of the bindings (to keep it simple) and use them only for
V1 bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 50f8cfbd5897ca182d43f4caf19937153f17a604)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
In few use cases (like: cpufreq), it is desired to get the maximum
latency for changing OPPs. Add support for that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 2174344765f472895c076d703c9cdc58215e1393)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
In few use cases (like: cpufreq), it is desired to get the maximum
voltage latency for changing OPPs. Add support for that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 655c9df961751ce21466f6e97e8033932c27a675)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Disable any OPPs where the connected regulator isn't able to provide the
specified voltage.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 7d34d56ef3349cd5f29cf7aab6650f3414fa81b9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This allows the OPP core to request/free the regulator resource,
attached to a device OPP. The regulator device is fetched using the name
provided by the driver, while calling: dev_pm_opp_set_regulator().
This will work for both OPP-v1 and v2 bindings.
This is a preliminary step for moving the OPP switching logic into the
OPP core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 9f8ea969d5cfdd4353d2adb004e8e2286b984369)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
sprintf() can access memory outside of the range of the character array,
and is risky in some situations. The driver specified prop_name string
can be longer than NAME_MAX here (only an attacker will do that though)
and so blindly copying it into the character array of size NAME_MAX
isn't safe. Instead we must use snprintf() here.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 5ff24d601092b222340b28466e263b1c4559407e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Set cpu_dev->id in cpumask first when setting up cpumask for CPUs that
share the same OPP table. This might be helpful when handling cpumask
without the original CPU bitfield set.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d9de19b1cc013433ad293365b5b3902ec73dfd60)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit 01fb4d3c39d3 ("PM / OPP: Parse 'opp-<prop>-<name>'
bindings") broke support for parsing standard opp-microvolt and
opp-microamp properties. Fix it by setting 'name' string to
proper value for !prop cases.
Fixes: 01fb4d3c39d3 ("PM / OPP: Parse 'opp-<prop>-<name> 'bindings")
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit fd8d8e63467c922be9ae4452cca2980d473477d9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
OPP bindings (for few properties) allow a platform to choose a
value/range among a set of available options. The options are present as
opp-<prop>-<name>, where the platform needs to supply the <name> string.
The OPP properties which allow such an option are: opp-microvolt and
opp-microamp.
Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_prop_name() APIs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 01fb4d3c39d35b725441e8a9a26b3f3ad67793ed)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
