On APQ8096 Auto ADP Lite platform, it only has two displays,
native HDMI and one DSI-HDMI display through ADV7533 bridge
chip. The secondary ADV7533 instance needs to be disabled.
Change-Id: Ibae5c1561ec9f6890f818eeef185dfcf0bc1a62d
Signed-off-by: Jin Li <jinl@codeaurora.org>
This change adds the HDCP 1x module for MSM DRM
driver and also hooks it up with SDE HDMI driver.
Change-Id: Iaf53c398254f6838a1d3cae610e069c5dbe18138
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Defines the non-removable property for UFS device node.
This basically lets the driver know that UFS is the boot
device.
Change-Id: I11df8441385910fdab7595a96a5deb24c7ca833e
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
If host driver fails to send WMI_VDEV_DOWN_CMDID, firmware will drop
further packets as vdev TX PAUSE reset is done as part of VDEV_DOWN.
Send vdev down to firmware if STA fails to associate.
CRs-Fixed: 2061161
Change-Id: Ie26645389dcb839758ff6aa55812172beeccc171
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
There is still one ADV7535 instance on MSM8996Pro Auto CDP lite
platform, which connects DSI0 interface to HDMI.
Change-Id: I1efe7484d6f4eb1956c95689420b06b40278588e
Signed-off-by: Jin Li <jinl@codeaurora.org>
Add useful helper functions to the DRM HDMI driver
to be used later when HDCP functionality gets added.
Also add and initialize necessary members to the
SDE HDMI controller to facilitate easier integration
of DRM HDCP module.
Change-Id: I699f6685327e674a871a404fe5cf3adebe823d46
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Peer creation in firmware fails if last peer deletion is still
in progress.
Wait for peer delete response from firmware after deleting peer
from host driver.
CRs-Fixed: 2047126
Change-Id: I9eb01393d9cd3dd82f2084262c250081f2076b46
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
Separate out the DRM HDMI utility functions into a separate
module.
Make the DRM HDMI utility functions support self retry where
they shall try for an arbitrary number of times on failure
otherwise let the client call the API to retry the number of
times as warranted.
Add a SDE HDMI utility file which shall invoke the upstream
functions in a manner as required to maintain the functionality
of legacy drivers.
Change-Id: I64af3f997a16b2d9358ea867585aa12772d22599
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add support to parse the HDMI TX version and
HDCP support from the HDMI and QFPROM registers.
This information is used to decide which HDCP driver
module is to be initialized at boot time.
Change-Id: Ib598f3867f1cd2ef9adb7503c5907cbb1e4ba758
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Update the minimum frequency restriction value and maximum frequency
limit value to the correct nominal frequency 1.056 GHz and 1.2096 GHz
respectively, as per the updated frequency plan of msm8996pro.
Change-Id: I725351c064f0211f95af4b4dd708b62360331282
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Without this fix the MMC may incorrectly set the CAPS for the SD card.
Change-Id: Ia4be2e78453663818cfd18deb9a590ec80423bca
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
For V4L2_CID_MPEG_VIDC_VIDEO_PICTYPE_DEC_MODE ioctl the valid
ctrl values are V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_ON and
V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_OFF. But for
V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_OFF case
we are sending wrong enable_picture.picture_type value. We are
also oring HAL_PICTURE_IDR, whereas only
HAL_PICTURE_I | HAL_PICTURE_P | HAL_PICTURE_B should be sent.
Change-Id: I96103d068b3e6e5f23da07d9a4c20e92ed55557c
Signed-off-by: Praveen Kumar Dwivedi <pkd@codeaurora.org>
Fix the access to ipacm_client array.
Change-Id: I0e6c026a4f6eb0bc21f4e07cb301e21f78103f33
CRs-Fixed: 2024177
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=wXRR
-----END PGP SIGNATURE-----
Merge 4.4.72 into android-4.4
Changes in 4.4.72
bnx2x: Fix Multi-Cos
ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
cxgb4: avoid enabling napi twice to the same queue
tcp: disallow cwnd undo when switching congestion control
vxlan: fix use-after-free on deletion
ipv6: Fix leak in ipv6_gso_segment().
net: ping: do not abuse udp_poll()
net: ethoc: enable NAPI before poll may be scheduled
net: bridge: start hello timer only if device is up
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
sparc: Machine description indices can vary
sparc64: reset mm cpumask after wrap
sparc64: combine activate_mm and switch_mm
sparc64: redefine first version
sparc64: add per-cpu mm of secondary contexts
sparc64: new context wrap
sparc64: delete old wrap code
arch/sparc: support NR_CPUS = 4096
serial: ifx6x60: fix use-after-free on module unload
ptrace: Properly initialize ptracer_cred on fork
KEYS: fix dereferencing NULL payload with nonzero length
KEYS: fix freeing uninitialized memory in key_update()
crypto: gcm - wait for crypto op not signal safe
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
nfsd4: fix null dereference on replay
nfsd: Fix up the "supattr_exclcreat" attributes
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
arm: KVM: Allow unaligned accesses at HYP
KVM: async_pf: avoid async pf injection when in guest mode
dmaengine: usb-dmac: Fix DMAOR AE bit definition
dmaengine: ep93xx: Always start from BASE0
xen/privcmd: Support correctly 64KB page granularity when mapping memory
xen-netfront: do not cast grant table reference to signed short
xen-netfront: cast grant table reference first to type int
ext4: fix SEEK_HOLE
ext4: keep existing extra fields when inode expands
ext4: fix fdatasync(2) after extent manipulation operations
usb: gadget: f_mass_storage: Serialize wake and sleep execution
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: chipidea: debug: check before accessing ci_role
staging/lustre/lov: remove set_fs() call from lov_getstripe()
iio: light: ltr501 Fix interchanged als/ps register field
iio: proximity: as3935: fix AS3935_INT mask
drivers: char: random: add get_random_long()
random: properly align get_random_int_hash
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
target: Re-add check to reject control WRITEs with overflow data
drm/msm: Expose our reservation object when exporting a dmabuf.
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
cpuset: consider dying css as offline
fs: add i_blocksize()
ufs: restore proper tail allocation
fix ufs_isblockset()
ufs: restore maintaining ->i_blocks
ufs: set correct ->s_maxsize
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
cxl: Fix error path on bad ioctl
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix memory leak in update_space_info failure path
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
scsi: qla2xxx: don't disable a not previously enabled PCI device
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
powerpc/numa: Fix percpu allocations to be NUMA aware
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
perf/core: Drop kernel samples even though :u is specified
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
drm/vmwgfx: Make sure backup_handle is always valid
drm/nouveau/tmr: fully separate alarm execution/pending lists
ALSA: timer: Fix race between read and ioctl
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ASoC: Fix use-after-free at card unregistration
drivers: char: mem: Fix wraparound check to allow mappings up to the end
tty: Drop krefs for interrupted tty lock
serial: sh-sci: Fix panic when serial console and DMA are enabled
net: better skb->sender_cpu and skb->napi_id cohabitation
mm: consider memblock reservations for deferred memory initialization sizing
NFS: Ensure we revalidate attributes before using execute_ok()
NFSv4: Don't perform cached access checks before we've OPENed the file
Make __xfs_xattr_put_listen preperly report errors.
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
arm64: entry: improve data abort handling of tagged pointers
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
usercopy: Adjust tests to deal with SMAP/PAN
arm64: armv8_deprecated: ensure extension of addr
arm64: ensure extension of smp_store_release value
Linux 4.4.72
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Glink_ssr channel calls subsystem_restart when remote side does not
responds. This leads to system crash if remote side is already in
shutdown state.
Call to subsystem_restart is removed from glink_ssr client.
CRs-Fixed: 2061085
Change-Id: I0df382950d34d8c8d4e2bc1cbbe5edef1d4135c1
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Reset for qos rate of xprt is not done duering SSR, this leads to
exhaustion of qos bandwidth when multiple SSR happens.
Reset qos rate of xprt to zero when link goes down.
CRs-Fixed: 2061061
Change-Id: Ibabca5584b01eb93a5b7fcc8a5304136ef400ba0
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Assert the device upon send command failure
after reaching maximum retries.
Change-Id: I154eda0697ec190662dc16edbe09e2213b4a0bae
Acked-by: Ashok Vuyyuru <avuyyuru@qti.qualcomm.com>
Acked-by: Mohammed Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
commit 994870bead4ab19087a79492400a5478e2906196 upstream.
When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.
Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).
This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.
A whitespace issue at the top of __smp_store_release() is also
corrected.
No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.
Fixes: 47933ad41a ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes: 878a84d5a8 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Cc: <stable@vger.kernel.org> # 3.14.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55de49f9aa17b0b2b144dd2af587177b9aadf429 upstream.
Our compat swp emulation holds the compat user address in an unsigned
int, which it passes to __user_swpX_asm(). When a 32-bit value is passed
in a register, the upper 32 bits of the register are unknown, and we
must extend the value to 64 bits before we can use it as a base address.
This patch casts the address to unsigned long to ensure it has been
suitably extended, avoiding the potential issue, and silencing a related
warning from clang.
Fixes: bd35a4adc4 ("arm64: Port SWP/SWPB emulation support from arm")
Cc: <stable@vger.kernel.org> # 3.19.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f893c57e37ca730808cb2eee3820abd05e7507 upstream.
Under SMAP/PAN/etc, we cannot write directly to userspace memory, so
this rearranges the test bytes to get written through copy_to_user().
Additionally drops the bad copy_from_user() test that would trigger a
memcpy() against userspace on failure.
[arnd: the test module was added in 3.14, and this backported patch
should apply cleanly on all version from 3.14 to 4.10.
The original patch was in 4.11 on top of a context change
I saw the bug triggered with kselftest on a 4.4.y stable kernel]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream.
The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory
reference when a buffer cannot be allocated for returning the immediate
data.
The issue is that the rkey validation has already occurred and the RNR
nak fails to release the reference that was fruitlessly gotten. The
the peer will send the identical single packet request when its RNR
timer pops.
The fix is to release the held reference prior to the rnr nak exit.
This is the only sequence the requires both rkey validation and the
buffer allocation on the same packet.
Cc: Stable <stable@vger.kernel.org> # 4.7+
Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 276e93279a630657fff4b086ba14c95955912dfa upstream.
This backport has a minor difference from the upstream commit: it adds
the asm-uaccess.h file, which is not present in 4.4, because 4.4 does
not have commit b4b8664d291a ("arm64: don't pull uaccess.h into *.S").
Original patch description:
When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).
When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.
Fixes: d50240a5f6 ("arm64: mm: permit use of tagged pointers at EL0")
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dcd9dd8cebe9fa626af7e2358d03a37041a70fb upstream.
This backport has a few small differences from the upstream commit:
- The address tag is removed in watchpoint_handler() instead of
get_distance_from_watchpoint(), because 4.4 does not have commit
fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact watchpoint
addresses").
- A macro is backported (untagged_addr), as it is not present in 4.4.
Original patch description:
When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.
The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.
Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.
Fixes: d50240a5f6 ("arm64: mm: permit use of tagged pointers at EL0")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 791cc43b36eb1f88166c8505900cad1b43c7fe1a upstream.
Commit 2a6fba6 "xfs: only return -errno or success from attr ->put_listent"
changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is
insufficient space in the buffer assuming that setting context->count to -1
would be enough, but all of the ->put_listent callers only check seen_enough.
This results in a failed assertion:
XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175
in insufficient buffer size case.
This is only reproducible with at least 2 xattrs and only when the buffer
gets depleted before the last one.
Furthermore if buffersize is such that it is enough to hold the last xattr's
name, but not enough to hold the sum of preceeding xattr names listxattr won't
fail with ERANGE, but will suceed returning last xattr's name without the
first character. The first character end's up overwriting data stored at
(context->alist - 1).
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 762674f86d0328d5dc923c966e209e1ee59663f2 upstream.
Donald Buczek reports that a nfs4 client incorrectly denies
execute access based on outdated file mode (missing 'x' bit).
After the mode on the server is 'fixed' (chmod +x) further execution
attempts continue to fail, because the nfs ACCESS call updates
the access parameter but not the mode parameter or the mode in
the inode.
The root cause is ultimately that the VFS is calling may_open()
before the NFS client has a chance to OPEN the file and hence revalidate
the access and attribute caches.
Al Viro suggests:
>>> Make nfs_permission() relax the checks when it sees MAY_OPEN, if you know
>>> that things will be caught by server anyway?
>>
>> That can work as long as we're guaranteed that everything that calls
>> inode_permission() with MAY_OPEN on a regular file will also follow up
>> with a vfs_open() or dentry_open() on success. Is this always the
>> case?
>
> 1) in do_tmpfile(), followed by do_dentry_open() (not reachable by NFS since
> it doesn't have ->tmpfile() instance anyway)
>
> 2) in atomic_open(), after the call of ->atomic_open() has succeeded.
>
> 3) in do_last(), followed on success by vfs_open()
>
> That's all. All calls of inode_permission() that get MAY_OPEN come from
> may_open(), and there's no other callers of that puppy.
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=109771
Link: http://lkml.kernel.org/r/1451046656-26319-1-git-send-email-buczek@molgen.mpg.de
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c5fc09a1157a11dbe84e6421c3e0b37d05238cb upstream.
Donald Buczek reports that NFS clients can also report incorrect
results for access() due to lack of revalidation of attributes
before calling execute_ok().
Looking closely, it seems chdir() is afflicted with the same problem.
Fix is to ensure we call nfs_revalidate_inode_rcu() or
nfs_revalidate_inode() as appropriate before deciding to trust
execute_ok().
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Link: http://lkml.kernel.org/r/1451331530-3748-1-git-send-email-buczek@molgen.mpg.de
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 864b9a393dcb5aed09b8fd31b9bbda0fdda99374 upstream.
We have seen an early OOM killer invocation on ppc64 systems with
crashkernel=4096M:
kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0
kthreadd cpuset=/ mems_allowed=7
CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1
Call Trace:
dump_stack+0xb0/0xf0 (unreliable)
dump_header+0xb0/0x258
out_of_memory+0x5f0/0x640
__alloc_pages_nodemask+0xa8c/0xc80
kmem_getpages+0x84/0x1a0
fallback_alloc+0x2a4/0x320
kmem_cache_alloc_node+0xc0/0x2e0
copy_process.isra.25+0x260/0x1b30
_do_fork+0x94/0x470
kernel_thread+0x48/0x60
kthreadd+0x264/0x330
ret_from_kernel_thread+0x5c/0xa4
Mem-Info:
active_anon:0 inactive_anon:0 isolated_anon:0
active_file:0 inactive_file:0 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
slab_reclaimable:5 slab_unreclaimable:73
mapped:0 shmem:0 pagetables:0 bounce:0
free:0 free_pcp:0 free_cma:0
Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 0 0 0
Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB
0 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
819200 pages RAM
0 pages HighMem/MovableOnly
817481 pages reserved
0 pages cma reserved
0 pages hwpoisoned
the reason is that the managed memory is too low (only 110MB) while the
rest of the the 50GB is still waiting for the deferred intialization to
be done. update_defer_init estimates the initial memoty to initialize
to 2GB at least but it doesn't consider any memory allocated in that
range. In this particular case we've had
Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)
so the low 2GB is mostly depleted.
Fix this by considering memblock allocations in the initial static
initialization estimation. Move the max_initialise to
reset_deferred_meminit and implement a simple memblock_reserved_memory
helper which iterates all reserved blocks and sums the size of all that
start below the given address. The cumulative size is than added on top
of the initial estimation. This is still not ideal because
reset_deferred_meminit doesn't consider holes and so reservation might
be above the initial estimation whihch we ignore but let's make the
logic simpler until we really need to handle more complicated cases.
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52bd2d62ce6758d811edcbd2256eb9ea7f6a56cb upstream.
skb->sender_cpu and skb->napi_id share a common storage,
and we had various bugs about this.
We had to call skb_sender_cpu_clear() in some places to
not leave a prior skb->napi_id and fool netdev_pick_tx()
As suggested by Alexei, we could split the space so that
these errors can not happen.
0 value being reserved as the common (not initialized) value,
let's reserve [1 .. NR_CPUS] range for valid sender_cpu,
and [NR_CPUS+1 .. ~0U] for valid napi_id.
This will allow proper busy polling support over tunnels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream.
This patch fixes an issue that kernel panic happens when DMA is enabled
and we press enter key while the kernel booting on the serial console.
* An interrupt may occur after sci_request_irq().
* DMA transfer area is initialized by setup_timer() in sci_request_dma()
and used in interrupt.
If an interrupt occurred between sci_request_irq() and setup_timer() in
sci_request_dma(), DMA transfer area has not been initialized yet.
So, this patch changes the order of sci_request_irq() and
sci_request_dma().
Fixes: 73a19e4c03 ("serial: sh-sci: Add DMA support.")
Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com>
[Shimoda changes the commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9036d0662360cd4c79578565ce422ed5872f301 upstream.
When the tty lock is interrupted on attempted re-open, 2 tty krefs
are still held. Drop extra kref before returning failure from
tty_lock_interruptible(), and drop lookup kref before returning
failure from tty_open().
Fixes: 0bfd464d3fdd ("tty: Wait interruptibly for tty lock on reopen")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32829da54d9368103a2f03269a5120aa9ee4d5da upstream.
A recent fix to /dev/mem prevents mappings from wrapping around the end
of physical address space. However, the check was written in a way that
also prevents a mapping reaching just up to the end of physical address
space, which may be a valid use case (especially on 32-bit systems).
This patch fixes it by checking the last mapped address (instead of the
first address behind that) for overflow.
Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()")
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4efda5f2130da033aeedc5b3205569893b910de2 upstream.
soc_cleanup_card_resources() call snd_card_free() at the last of its
procedure. This turned out to lead to a use-after-free.
PCM runtimes have been already removed via soc_remove_pcm_runtimes(),
while it's dereferenced later in soc_pcm_free() called via
snd_card_free().
The fix is simple: just move the snd_card_free() call to the beginning
of the whole procedure. This also gives another benefit: it
guarantees that all operations have been shut down before actually
releasing the resources, which was racy until now.
Reported-and-tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba3021b2c79b2fa9114f92790a99deb27a65b728 upstream.
snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices. Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
copy_to_user ./arch/x86/include/asm/uaccess.h:725
snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
do_loop_readv_writev fs/read_write.c:716
__do_readv_writev+0x94c/0x1380 fs/read_write.c:864
do_readv_writev fs/read_write.c:894
vfs_readv fs/read_write.c:908
do_readv+0x52a/0x5d0 fs/read_write.c:934
SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the
previous fix for the ioctl/read race, we cover the whole problem.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d11662f4f798b50d8c8743f433842c3e40fe3378 upstream.
The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.
This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4e382ca7586a63b6c1e5221ce0863ff867c2df6 upstream.
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
