This snapshot is taken as of msm-3.18 commit e70ad0cd (Promotion of
kernel.lnx.3.18-151201.)
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
In a heterogenous multiprocessor system, specifying the
'maxcpus' parameter on the kernel command line does not
provide sufficient control over which CPUs are brought
online at kernel boot time, since CPUs may have nonuniform
performance characteristics. Thus, we introduce a
'boot_cpus' command line argument, allowing the user to
explicitly specify the list of CPUs that shall be brought
online during kernel boot.
Change-Id: I5f119e23202660941fa7be8c4e6dd91a82365451
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
[abhimany: resolve trivial merge conflicts]
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
When the system suspend is happening, last core disables
the non-sec interrupts at QGIC by setting the GRPEN1_EL1_NS
to ZERO. This makes core not seen any non-sec interrupts
and would result into system do not wake up from any of
interrupts. Do not touch GRPEN1_EL1_NS register while
system is going into suspend.
Change-Id: I7d6c5047fb4743df187fe49fba18b64db3179bc9
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Conflicts:
drivers/irqchip/irq-gic-common.h
The use of clockevents_notify is deprcated and targeted APIs are used
instead of the clockevents_notify callbacks. Switch broadcast timer
notifications to tick_broadcast_enter and tick_broadcast_exit.
Change-Id: I3441873eb4009b105db04f4a18d28ae9ccd07e95
Cluster pm notifications without level information increases difficulty
and complexity for the registered drivers to figure out when the last
coherency level is going into power collapse.
Send notifications with level information that allows the registered
drivers to easily determine the cluster level that is going in/out of
power collapse.
There is an issue with this implementation. GIC driver saves and
restores the distributed registers as part of cluster notifications. On
newer platforms there are multiple cluster levels are defined (e.g l2,
cci etc). These cluster level notofications can happen independently.
On MSM platforms GIC is still active while the cluster sleeps in idle,
causing the GIC state to be overwritten with an incorrect previous state
of the interrupts. This leads to a system hang. Do not save and restore
on any L2 and higher cache coherency level sleep entry and exit.
Change-Id: I31918d6383f19e80fe3b064cfaf0b55e16b97eb6
Signed-off-by: Archana Sathyakumar <asathyak@codeaurora.org>
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Background writes happen in the context of a background thread.
It is very useful to identify the actual task that generated the
request instead of background task that submited the request.
Hence keep track of the task when a page gets dirtied and dump
this task info while tracing. Not all the pages in the bio are
dirtied by the same task but most likely it will be, since the
sectors accessed on the device must be adjacent.
Change-Id: I6afba85a2063dd3350a0141ba87cf8440ce9f777
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
[venkatg@codeaurora.org: Fixed trivial merge conflicts]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
PM_QOS_SUM is a new enum type supported in the upstream kernel. The target
qos value for PM_QOS_SUM type is updated as the sum of all the priorities
that are applicable to the current CPU.
Change-Id: I89152db4fbbf08db113b52e6c5fee4aba9b70933
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Send the list of cpus whose qos has been affected along with the changed
value. Driver listening in for notifier can use this to apply the qos value
for the respective cpus.
Change-Id: I8f3c2ea624784c806c55de41cc7c7fcf8ebf02da
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
[mattw@codeaurora.org: resolve trivial context conflicts]
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Conflicts:
kernel/power/qos.c
QoS request for CPU_DMA_LATENCY can be better optimized if the request
can be set only for the required cpus and not all cpus. This helps save
power on other cores, while still gauranteeing the quality of service.
Enhance the QoS constraints data structures to support target value for
each core. Requests specify if the QoS is applicable to all cores
(default) or to a selective subset of the cores or to a core(s), that the
IRQ is affine to.
QoS requests that need to track an IRQ can be set to apply only on the
cpus to which the IRQ's smp_affinity attribute is set to. The QoS
framework will automatically track IRQ migration between the cores. The
QoS is updated to be applied only to the core(s) that the IRQ has been
migrated to.
Idle and interested drivers can request a PM QoS value for a constraint
across all cpus, or a specific cpu or a set of cpus. Separate APIs have
been added to request for individual cpu or a cpumask. The default
behaviour of PM QoS is maintained i.e, requests that do not specify a
type of the request will continue to be effected on all cores. Requests
that want to specify an affinity of cpu(s) or an irq, can modify the PM
QoS request data structures by specifying the type of the request and
either the mask of the cpus or the IRQ number depending on the type.
Updating the request does not reset the type of the request.
The userspace sysfs interface does not support CPU/IRQ affinity.
Change-Id: I09ae85a1e8585d44440e86d63504ad734e8e3e36
Signed-off-by: Praveen Chidambaram <pchidamb@codeaurora.org>
Conflicts:
kernel/power/qos.c
QoS add requests uses a handle to the priority list that is used
internally to save the request, but this does not extend well. Also,
dev_pm_qos structure definition seems to use a list object directly.
The 'derivative' relationship seems to be broken.
Use pm_qos_request objects instead of passing around the protected
priority list object.
Change-Id: Ie4c9c22dd4ea13265fe01f080ba68cf77d9d484d
Signed-off-by: Praveen Chidambaram <pchidamb@codeaurora.org>
[mattw@codeaurora.org: resolve context conflicts and extend
struct modifications to additional affected users]
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Conflicts:
include/linux/pm_qos.h
As the priority of RTB panic notifier was zero, it was
not guaranteed to disable RTB right after kernel panic.
So RTB log buffer could be flooded with some I/O operations
after panic. By setting the priority of RTB panic notifier
to the highest value, make sure RTB is disabled right after
a kernel panic.
Change-Id: If9efc2ec31efa6aa17e92b2b01e81ab4df6d1730
Signed-off-by: Se Wang (Patrick) Oh <sewango@codeaurora.org>
RTB logging currently doesn't log the time
at which the logging was done. This can be
useful to compare with dmesg during debug.
The bytes for timestamp are taken by reducing
the sentinel array size to three from eleven
thus giving the extra 8 bytes to store time.
This maintains the size of the layout at 32.
Change-Id: Ifc7e4d2e89ed14d2a97467891ebefa9515983630
Signed-off-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org>
This snapshot is taken as of msm-3.10 commit:
78c36fa0ef (Merge "msm: mdss: Prevent backlight update during
continuous splash")
RTB support captures system events such as register writes to a
small uncached region. This is designed to aid in debugging, where
it may be useful to know the last events that occurred prior to a
device reset.
Change-Id: Idc51e618380f58a6803f40c47f2b3d29033b3196
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
[spjoshi@codeaurora.org: fix merge conflict]
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Define boot_reason and cold_boot variables in the arm64 version
of setup.c so that arm64 targets can export the boot_reason and
cold_boot sysctl entries.
This feature is required by the qpnp-power-on driver.
Change-Id: Id2d4ff5b8caa2e6a35d4ac61e338963d602c8b84
Signed-off-by: David Collins <collinsd@codeaurora.org>
[osvaldob: resolved trival merge conflicts]
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
commit 4355efbd80482a961cae849281a8ef866e53d55c upstream.
Commit f2411da746 ("driver-core: add driver module
asynchronous probe support") added async probe support,
in two forms:
* in-kernel driver specification annotation
* generic async_probe module parameter (modprobe foo async_probe)
To support the generic kernel parameter parse_args() was
extended via commit ecc8617053 ("module: add extra
argument for parse_params() callback") however commit
failed to f2411da746 failed to add the required argument.
This causes a crash then whenever async_probe generic
module parameter is used. This was overlooked when the
form in which in-kernel async probe support was reworked
a bit... Fix this as originally intended.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> [minimized]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e7bac536106236104e9e339531ff0fcdb7b8147 upstream.
This trivial wrapper adds clarity and makes the following patch
smaller.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51cbb5242a41700a3f250ecfb48dcfb7e4375ea4 upstream.
As Helge reported for timerfd we have the same issue in itimers. We return
remaining time larger than the programmed relative time to user space in case
of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra time
added in hrtimer_start_range_ns().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.528222587@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 572c39172684c3711e4a03c9a7380067e2b0661c upstream.
As Helge reported for timerfd we have the same issue in posix timers. We
return remaining time larger than the programmed relative time to user space
in case of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra
time added in hrtimer_start_range_ns().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.450510905@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddf1d398e517e660207e2c807f76a90df543a217 upstream.
An unprivileged user can trigger an oops on a kernel with
CONFIG_CHECKPOINT_RESTORE.
proc_pid_cmdline_read takes mmap_sem for reading and obtains args + env
start/end values. These get sanity checked as follows:
BUG_ON(arg_start > arg_end);
BUG_ON(env_start > env_end);
These can be changed by prctl_set_mm. Turns out also takes the semaphore for
reading, effectively rendering it useless. This results in:
kernel BUG at fs/proc/base.c:240!
invalid opcode: 0000 [#1] SMP
Modules linked in: virtio_net
CPU: 0 PID: 925 Comm: a.out Not tainted 4.4.0-rc8-next-20160105dupa+ #71
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff880077a68000 ti: ffff8800784d0000 task.ti: ffff8800784d0000
RIP: proc_pid_cmdline_read+0x520/0x530
RSP: 0018:ffff8800784d3db8 EFLAGS: 00010206
RAX: ffff880077c5b6b0 RBX: ffff8800784d3f18 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 00007f78e8857000 RDI: 0000000000000246
RBP: ffff8800784d3e40 R08: 0000000000000008 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000050
R13: 00007f78e8857800 R14: ffff88006fcef000 R15: ffff880077c5b600
FS: 00007f78e884a740(0000) GS:ffff88007b200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f78e8361770 CR3: 00000000790a5000 CR4: 00000000000006f0
Call Trace:
__vfs_read+0x37/0x100
vfs_read+0x82/0x130
SyS_read+0x58/0xd0
entry_SYSCALL_64_fastpath+0x12/0x76
Code: 4c 8b 7d a8 eb e9 48 8b 9d 78 ff ff ff 4c 8b 7d 90 48 8b 03 48 39 45 a8 0f 87 f0 fe ff ff e9 d1 fe ff ff 4c 8b 7d 90 eb c6 0f 0b <0f> 0b 0f 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
RIP proc_pid_cmdline_read+0x520/0x530
---[ end trace 97882617ae9c6818 ]---
Turns out there are instances where the code just reads aformentioned
values without locking whatsoever - namely environ_read and get_cmdline.
Interestingly these functions look quite resilient against bogus values,
but I don't believe this should be relied upon.
The first patch gets rid of the oops bug by grabbing mmap_sem for
writing.
The second patch is optional and puts locking around aformentioned
consumers for safety. Consumers of other fields don't seem to benefit
from similar treatment and are left untouched.
This patch (of 2):
The code was taking the semaphore for reading, which does not protect
against readers nor concurrent modifications.
The problem could cause a sanity checks to fail in procfs's cmdline
reader, resulting in an OOPS.
Note that some functions perform an unlocked read of various mm fields,
but they seem to be fine despite possible modificaton.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anshuman Khandual <anshuman.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb75a4282d0d9a3c7c44d940582c2d226cf3acfb upstream.
If the proxy lock in the requeue loop acquires the rtmutex for a
waiter then it acquired also refcount on the pi_state related to the
futex, but the waiter side does not drop the reference count.
Add the missing free_pi_state() call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Bhuvanesh_Surachari@mentor.com
Cc: Andy Lowe <Andy_Lowe@mentor.com>
Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9273a8bbf58a15051e53a777389a502420ddc60e upstream.
The pmem driver calls devm_memremap() to map a persistent memory range.
When the pmem driver is unloaded, this memremap'd range is not released
so the kernel will leak a vma.
Fix devm_memremap_release() to handle a given memremap'd address
properly.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit caaee6234d05a58c5b4d05e7bf766131b810a657 upstream.
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c03ee147193645be4c186d3688232fa438c57c7 upstream.
The following PowerPC commit:
c118baf802 ("arch/powerpc/mm/numa.c: do not allocate bootmem memory for non existing nodes")
avoids allocating bootmem memory for non existent nodes.
But when DEBUG_PER_CPU_MAPS=y is enabled, my powerNV system failed to boot
because in sched_init_numa(), cpumask_or() operation was done on
unallocated nodes.
Fix that by making cpumask_or() operation only on existing nodes.
[ Tested with and w/o DEBUG_PER_CPU_MAPS=y on x86 and PowerPC. ]
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: <gkurz@linux.vnet.ibm.com>
Cc: <grant.likely@linaro.org>
Cc: <nikunj@linux.vnet.ibm.com>
Cc: <vdavydov@parallels.com>
Cc: <linuxppc-dev@lists.ozlabs.org>
Cc: <linux-mm@kvack.org>
Cc: <peterz@infradead.org>
Cc: <benh@kernel.crashing.org>
Cc: <paulus@samba.org>
Cc: <mpe@ellerman.id.au>
Cc: <anton@samba.org>
Link: http://lkml.kernel.org/r/1452884483-11676-1-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 203cbf77de59fc8f13502dcfd11350c6d4a5c95f upstream.
If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to
prevent short sleeps, but we do not account for that in interfaces which
retrieve the remaining time.
Helge observed that timerfd can return a remaining time larger than the
relative timeout. That's not expected and breaks userland test programs.
Store the information that the timer was armed relative and provide functions
to adjust the remaining time. To avoid bloating the hrtimer struct make state
a u8, which as a bonus results in better code on x86 at least.
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.273328486@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d91f8b15361dfb438ab6eb3b319e2ded43458ff upstream.
@console_may_schedule tracks whether console_sem was acquired through
lock or trylock. If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched(). This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.
However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines. Also, only a few drivers call
console_conditional_schedule() to begin with. This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.
If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.
Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ccd83714a009ee301b50c15f6c3a5dc1f30164c upstream.
When a max stack trace is discovered, the stack dump is saved. In order to
not record the overhead of the stack tracer, the ip of the traced function
is looked for within the dump. The trace is started from the location of
that function. But if for some reason the ip is not found, the entire stack
trace is then truncated. That's not very useful. Instead, print everything
if the ip of the traced function is not found within the trace.
This issue showed up on s390.
Link: http://lkml.kernel.org/r/20160129102241.1b3c9c04@gandalf.local.home
Fixes: 72ac426a5b ("tracing: Clean up stack tracing and fix fentry updates")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Change-Id: Ia5faf50243e19c1755201212e04c8892d929785a
Signed-off-by: Colin Cross <ccross@android.com>
(cherry picked from commit https://lkml.org/lkml/2015/12/21/337)
ASLR only uses as few as 8 bits to generate the random offset for the
mmap base address on 32 bit architectures. This value was chosen to
prevent a poorly chosen value from dividing the address space in such
a way as to prevent large allocations. This may not be an issue on all
platforms. Allow the specification of a minimum number of bits so that
platforms desiring greater ASLR protection may determine where to place
the trade-off.
Bug: 24047224
Signed-off-by: Daniel Cashman <dcashman@android.com>
Signed-off-by: Daniel Cashman <dcashman@google.com>
Change-Id: Ibf9ed3d4390e9686f5cc34f605d509a20d40e6c2
Update vma_merge() call in private anonymous memory prctl,
introduced in AOSP commit ee8c5f78f09a
"mm: add a field to store names for private anonymous memory",
so as to align with changes from upstream commit 19a809afe2
"userfaultfd: teach vma_merge to merge across vma->vm_userfaultfd_ctx".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Userspace processes often have multiple allocators that each do
anonymous mmaps to get memory. When examining memory usage of
individual processes or systems as a whole, it is useful to be
able to break down the various heaps that were allocated by
each layer and examine their size, RSS, and physical memory
usage.
This patch adds a user pointer to the shared union in
vm_area_struct that points to a null terminated string inside
the user process containing a name for the vma. vmas that
point to the same address will be merged, but vmas that
point to equivalent strings at different addresses will
not be merged.
Userspace can set the name for a region of memory by calling
prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name);
Setting the name to NULL clears it.
The names of named anonymous vmas are shown in /proc/pid/maps
as [anon:<name>] and in /proc/pid/smaps in a new "Name" field
that is only present for named vmas. If the userspace pointer
is no longer valid all or part of the name will be replaced
with "<fault>".
The idea to store a userspace pointer to reduce the complexity
within mm (at the expense of the complexity of reading
/proc/pid/mem) came from Dave Hansen. This results in no
runtime overhead in the mm subsystem other than comparing
the anon_name pointers when considering vma merging. The pointer
is stored in a union with fieds that are only used on file-backed
mappings, so it does not increase memory usage.
Includes fix from Jed Davis <jld@mozilla.com> for typo in
prctl_set_vma_anon_name, which could attempt to set the name
across two vmas at the same time due to a typo, which might
corrupt the vma list. Fix it to use tmp instead of end to limit
the name setting to a single vma at a time.
Change-Id: I9aa7b6b5ef536cd780599ba4e2fba8ceebe8b59f
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Add a userspace visible knob to tell the VM to keep an extra amount
of memory free, by increasing the gap between each zone's min and
low watermarks.
This is useful for realtime applications that call system
calls and have a bound on the number of allocations that happen
in any short time period. In this application, extra_free_kbytes
would be left at an amount equal to or larger than than the
maximum number of allocations that happen in any burst.
It may also be useful to reduce the memory use of virtual
machines (temporarily?), in a way that does not cause memory
fragmentation like ballooning does.
[ccross]
Revived for use on old kernels where no other solution exists.
The tunable will be removed on kernels that do better at avoiding
direct reclaim.
Change-Id: I765a42be8e964bfd3e2886d1ca85a29d60c3bb3e
Signed-off-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
At times, it is necessary for boards to provide some additional information
as part of panic logs. Provide information on the board hardware as part
of panic logs.
It is safer to print this information at the very end in case something
bad happens as part of the information retrieval itself.
To use this, set global mach_panic_string to an appropriate string in the
board file.
Change-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d
Signed-off-by: Nishanth Menon <nm@ti.com>
Make PR_SET_TIMERSLACK_PID consider pid namespace and resolve the
target pid in the caller's namespace. Otherwise, calls from pid
namespace other than init would fail or affect the wrong task.
Change-Id: I1da15196abc4096536713ce03714e99d2e63820a
Signed-off-by: Micha Kalfon <micha@cellrox.com>
Acked-by: Oren Laadan <orenl@cellrox.com>
The case clause for the PR_SET_TIMERSLACK_PID option was placed inside
the an internal switch statement for PR_MCE_KILL (see commits 37a591d4
and 8ae872f1) . This commit moves it to the right place.
Change-Id: I63251669d7e2f2aa843d1b0900e7df61518c3dea
Signed-off-by: Micha Kalfon <micha@cellrox.com>
Acked-by: Oren Laadan <orenl@cellrox.com>
Adds a capable() check to make sure that arbitary apps do not change the
timer slack for other apps.
Bug: 15000427
Change-Id: I558a2551a0e3579c7f7e7aae54b28aa9d982b209
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Second argument is similar to PR_SET_TIMERSLACK, if non-zero then the
slack is set to that value otherwise sets it to the default for the thread.
Takes PID of the thread as the third argument.
This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)
Change-Id: I744d451ff4e60dae69f38f53948ff36c51c14a3f
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Refactor *allow_attach() handler to align it with the changes
from mainline commit 1f7dd3e5a6 "cgroup: fix handling of
multi-destination migration from subtree_control enabling".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
In 53b5e2f generic cgroup subsystem permission checks have been added.
When this is been done within procs_write an empty taskset is added to
the tasks css set. When a task later on migrates to a new group we see a
dmesg warning cause the mg_node isn't empty (cgroup.c:2086). Cause this
happens all the time this spams dmesg.
I am not really familiar with this code, but it looks to me like adding
the taskset is just a temporary action in this context. Therefore this
taskset should be removed after the actual check. This is what this fix
does.
This problem was seen and the fix tested on x86 using l-mr1 and master.
Change-Id: I9894d39e8b5692ef65149002b07e65a84a33ffea
Signed-off-by: Christian Poetzsch <christian.potzsch@imgtec.com>
- Return -EINVAL when cgroups support isn't enabled
- Add allow_attach callback in CPU cgroups
Change-Id: Id3360b4a39919524fc4b6fcbd44fa2050009f000
Signed-off-by: Rom Lemarchand <romlem@android.com>
Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.
Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.
This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler. If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.
Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
move cpu_cgroup_allow_attach to a common subsys_cgroup_allow_attach.
This allows any process with CAP_SYS_NICE to move tasks across cgroups if
they use this function as their allow_attach handler.
Bug: 18260435
Change-Id: I6bb4933d07e889d0dc39e33b4e71320c34a2c90f
Signed-off-by: Rom Lemarchand <romlem@android.com>
Suspend time reporting Change-Id: I2cb9a9408a5fd12166aaec11b935a0fd6a408c63
(Power: Report suspend times from last_suspend_time), is broken on 3.16+
kernels because get_xtime_and_monotonic_and_sleep_offset() hrtimer helper
routine is removed from kernel timekeeping.
The replacement helper routines ktime_get_update_offsets_{tick,now}()
are private to core kernel timekeeping so we can't use them, hence using
ktime_get() and ktime_get_boottime() instead and sampling the time twice.
Idea is to use Monotonic boottime offset to calculate total time spent
in last suspend state and CLOCK_MONOTONIC to calculate time spent in
last suspend-resume process.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This node epxorts two values separated by space.
From left to right:
1. time spent in suspend/resume process
2. time spent sleep in suspend state
Change-Id: I2cb9a9408a5fd12166aaec11b935a0fd6a408c63
Remove the HAS_WAKELOCK config as it doesn't seem to have been used in
the 3.10 or 3.14 kernels.
Add some Documentation to CONFIG_WAKELOCK so that it is selectable and
can be disabled is desired.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
