Dfps info is calculated for a specific msm part and needs to be
used for the same. Add a chip serial number for the dfps info so
that the PLL trim codes are used for the same msm part on which
they are generated.
Change-Id: I6f1e519c1e9278b35dfbdf3d9ba4a2ed0e1a6a78
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
With support for new AKM suites (example FILS-SHA256), the KEK length
can now be more than NL80211_KEK_LEN and the KCK length can be zero.
Add changes in cfg80211 to specify the length of KEK, and make KCK
optional. Make NL80211_REKEY_DATA_KEK as NLA_BINARY to enforce a maximum
length check.
Also add macro CFG80211_REKEY_DATA_KEK_LEN to indicate support for
including KEK length in rekey data.
CRs-Fixed: 2087759
Change-Id: Ica8dbb8614e0a9c3905e125b4a5254e43821984e
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
During system suspend/resume or WLAN interface up/down
by the network subsystem the ath10k SNOC WLAN driver
configure WLAN enable/disable cmd with the WLAN firmware
over QMI interface. The WLAN enable/disable cmd configuration
with the WLAN firmware during system suspend is preventing
the system suspend.
Register PM event notifier for the ath10k SNOC platform
driver and synchronize the WLAN HIF power down/up
configuration, WLAN enable/disable cmd configuration
with WLAN firmware according to the system power state.
CRs-Fixed: 2110607
Change-Id: I5eeda967ae11c21ab5164c18b3e0a3bf668c916a
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information,
Association IEs and the Authentication type to driver / firmware which
will be used in subsequent roamings.
CRs-Fixed: 2087764
Change-Id: Ic296b66a39b9ceb8de992a9f37112439389946a2
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
Synchronize camera_v4l2_open and camera_v4l2_close to avoid use
after free.
Change-Id: I4055f00ff30408cc0469015b3e49d877632726bf
CRs-fixed: 2048964
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Currently driver is enabling hsphy_irq and ssphy_irq at the end
of dwc3_msm_suspend() without any spinlock/mutex protection. But
if it happens that hsphy_irq or ssphy_irq gets fired right after
enablement of irqs, there is a chance that we might see warnings
related to unbalanced irq enable. This could happen due to flag
is not yet set to indicate phy irqs enabled in suspend(). This
might cause phy irq left enabled after resume and could cause
crash due to unclocked access in host mode. Fix the unbalance irq
enable by having mutex protection and also extend mutex protection
for dwc3_msm_suspend() and dwc3_msm_resume().
Change-Id: I8c2d26f82feb235add64305c1d0e5b686993e9e9
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
APPS interact with MPSS through 32 bit register interface.
Set dma mask for 32 bit so that mba and mdt memory are allocated
from 32 bit physical address range.
Change-Id: I623f00097d464b1bdd8f609e2d6c9a126f4bea4d
Signed-off-by: Arun KS <arunks@codeaurora.org>
mmc_blk_cmdq_part_switch always returned 0 even in case of
failures as errors are not handled in this function.
We need to un-halt cmdq in case it's in halt state when
mmc_switch fails. This change adds error handling code and
returns error in case of any failure.
Change-Id: Icd7ec4b7b53fc56d39dbcea195ae44bf08de17e5
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
In case of any UFS error or aborts, read TX and RX
FSM states which can be used for debugging purpose.
Change-Id: I24a989a9e1b07ba904ec639e26736a01769f0593
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Adding new API for IPA clients to check for IPA
uC ready before bringing up IPA uC offload data path.
CRs-Fixed: 2030217
Change-Id: I0328658cba829cacc89b7c0b8edf7e52aa16e45c
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Switching HDMI display mode many times, could find
sometimes color distortion or no signal display.
If disable HDMI block before setting HDMI core off,
that could be fixed.
Change-Id: Ib0e8002f59e017a81298d4a5a39736a7516e3435
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
composite driver is using sprintf() function to expose value to
userspace. This sprintf() is banned function and instead required
to use snprintf() function. Hence replace sprintf() with snprintf()
function to fix static analysis tool error.
Change-Id: I85f38fe3f2121f6a0cb76b7178a3e699ba1dc7f2
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Remove circular dependency deadlock in a scenario where hotplug of CPU is
being done while there is updation in cgroup and cpuset triggered from
userspace.
Process A => kthreadd => Process B => Process C => Process A
Process A
cpu_subsys_offline();
cpu_down();
_cpu_down();
mutex_lock(&cpuhotplug.lock); //held
__cpu_notify();
workqueue_cpu_down_callback();
queue_work_on(system_highpri_wq);
__queue_work();
insert_work();
wake_up_worker(); //pool->nr_running = 0
flush_work();
wait_for_completion();
worker_thread();
need_more_worker(); // returns true
manage_workers();
maybe_create_worker();
create_worker();
kthread_create_on_node();
wake_up_process(kthreadd_task);
kthreadd
kthreadd();
kernel_thread();
do_fork();
copy_process();
percpu_down_read(&cgroup_threadgroup_rwsem);
__rwsem_down_read_failed_common(); //waiting
Process B
kernfs_fop_write();
cgroup_file_write();
cgroup_tasks_write();
percpu_down_write(&cgroup_threadgroup_rwsem); //held
cgroup_attach_task();
cgroup_migrate();
cgroup_taskset_migrate();
cpuset_can_attach();
mutex_lock(&cpuset_mutex); //waiting
Process C
kernfs_fop_write();
cgroup_file_write();
cpuset_write_resmask();
mutex_lock(&cpuset_mutex); //held
update_cpumask();
update_cpumasks_hier();
rebuild_sched_domains_locked();
get_online_cpus();
mutex_lock(&cpuhotplug.lock); //waiting
Eliminate this dependecy by reordering locking of cpuset_mutex
and cpuhotplug.lock.
Change-Id: Ifd76373d717c53b531623a3be76b7d32e0d959fd
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
