This patch fixes a number of problems in crypto driver Kconfig
entries:
1. Select BLKCIPHER instead of BLKCIPHER2. The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch
crypto: caam - Add definition of rd/wr_reg64 for little endian platform
added support for little endian platforms to the CAAM driver. Namely a
write and read function for 64 bit registers.
The only user of this functions is the Job Ring driver (drivers/crypto/caam/jr.c).
It uses the functions to set the DMA addresses for the input/output rings.
However, at least in the default configuration, the least significant 32 bits are
always in the base+0x0004 address; independent of the endianness of the bytes itself.
That means the addresses do not change with the system endianness.
DMA addresses are only 32 bits wide on non-64-bit systems, writing the upper 32 bits
of this value to the register for the least significant bits results in the DMA address
being set to 0.
Fix this by always writing the registers in the same way.
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It appears that, at some point last year, XFS made directory handling
changes which bring it into lockdep conflict with shmem_zero_setup():
it is surprising that mmap() can clone an inode while holding mmap_sem,
but that has been so for many years.
Since those few lockdep traces that I've seen all implicated selinux,
I'm hoping that we can use the __shmem_file_setup(,,,S_PRIVATE) which
v3.13's commit c727709092 ("security: shmem: implement kernel private
shmem inodes") introduced to avoid LSM checks on kernel-internal inodes:
the mmap("/dev/zero") cloned inode is indeed a kernel-internal detail.
This also covers the !CONFIG_SHMEM use of ramfs to support /dev/zero
(and MAP_SHARED|MAP_ANONYMOUS). I thought there were also drivers
which cloned inode in mmap(), but if so, I cannot locate them now.
Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com>
Reported-and-tested-by: Daniel Wagner <wagi@monom.org>
Reported-and-tested-by: Morten Stevens <mstevens@fedoraproject.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pciehp debug logging is overly verbose and often redundant. Almost all
of the information printed by dbg_ctrl() is also printed by the normal PCI
core enumeration code and by pcie_init().
Remove the redundant debug info.
When claiming a pciehp bridge, we print the slot characteristics, e.g.,
Slot #6 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
Add the Hot-Plug Capable and Hot-Plug Surprise bits to this information,
and print it all in the same order as lspci does.
No functional change except the message text changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rajat Jain <rajatja@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
We enable _CRS on all systems from 2008 and later. On older systems, we
ignore _CRS and assume the whole physical address space (excluding RAM and
other devices) is available for PCI devices, but on systems that support
physical address spaces larger than 4GB, it's doubtful that the area above
4GB is really available for PCI.
After d56dbf5bab ("PCI: Allocate 64-bit BARs above 4G when possible"), we
try to use that space above 4GB *first*, so we're more likely to put a
device there.
On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394,
and card reader devices unassigned (but only after Windows had been
booted). Only the sound device had a 64-bit BAR, so it was the only device
placed above 4GB, and hence the only device that didn't work.
Keep _CRS enabled even on pre-2008 systems if they support physical address
space larger than 4GB.
Fixes: d56dbf5bab ("PCI: Allocate 64-bit BARs above 4G when possible")
Reported-and-tested-by: Juan Dayer <jdayer@outlook.com>
Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.
One may want, for instance, play with:
-d, --delay <n> number of seconds to delay between refreshes
and:
-z, --zero zero history across updates
Plus CTRL+z to see only the events since last zeroing, etc.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For an upcoming feature in 'perf top' we will have a hotkey to
enable/disable events, so remember if the events in the list are
enabled or disabled and allows toggling this state using a new
method.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I get following crash on multiple systems and across several releases
(at least since v3.18).
Core was generated by `/tmp/perf trace sleep 0.2 '.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
195 u64 head = ACCESS_ONCE(pc->data_head);
(gdb) bt
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
#1 perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>)
at util/evlist.c:637
#2 0x000000001003ce4c in trace__run (argv=<optimized out>,
argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259
#3 cmd_trace (argc=<optimized out>, argv=<optimized out>,
prefix=<optimized out>) at builtin-trace.c:2799
#4 0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3,
argv=0x3fffd7b2b550) at perf.c:370
#5 0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3)
at perf.c:429
#6 run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473
#7 main (argc=3, argv=0x3fffd7b2b550) at perf.c:588
The problem seems to be a race condition, when the application has just
exited. Some/all fds associated with the perf-events (tracepoints) go
into a POLLHUP/ POLLERR state and the mmap region associated with those
events are unmapped (in perf_evlist__filter_pollfd()).
But we go back and do a perf_evlist__mmap_read() which assumes that the
mmaps are still valid and we hit the crash.
If the mapping for an event is released, its refcnt is 0 (and ->base
is NULL), so ensure we have non-zero refcount before accessing the map.
Note that perf-record has a similar logic but unlike perf-trace, the
record__mmap_read_all() checks the evlist->mmap[i].base before accessing
the map.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com
[ Fixed it up to use atomic_read() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Speed up the "perf probe --list" by caching the last used debuginfo.
perf probe --list always open and load debuginfo for each entry of probe
list. This takes very a long time.
E.g. with vfs_* events (total 96 probes)
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m25.376s
user 0m24.381s
sys 0m1.012s
To solve this issue, this adds debuginfo_cache to cache the
last used debuginfo on memory.
With this fix, the perf-probe --list significantly improves
its speed.
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m0.161s
user 0m0.136s
sys 0m0.025s
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the last part of converted events are blacklisted or out-of-text,
those are skipped and perf probe doesn't show usage examples. This
fixes it to show the example even if the last part of event list is
skipped.
E.g. without this patch, events are added, but suddenly end:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
probe:vfs_open (on vfs_*)
...
probe:vfs_dentry_acceptable (on vfs_*)
probe:vfs_load_quota_inode (on vfs_*)
#
With this fix:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
...
probe:vfs_load_quota_inode (on vfs_*)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_load_quota_inode -aR sleep 1
Note that this can be reproduced ONLY IF the vfs_caches_init* is the
last part of matched symbol list. I've checked this happens on
"3.19.0-generic #18-Ubuntu" kernel binary.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit e3d09ec812 ("tools lib traceevent:
Export dynamic symbols used by traceevent plugins") adds libtraceevent
dynamic list directly into LDFLAGS, which makes all targets depend on
that list through LDFLAGS.
This is not good since some of targets like libgtk.so doesn't use plugin
at all, but require the existance of that list because of linker
options.
This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS,
makes only perf and perf.so use it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following error occurs when trying to use 'perf report' on x86_64 to
cross analysis a perf.data generated by an old perf on a big-endian
machine:
# perf report
*** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef]
/lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae]
/lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987]
/path/to/perf[0x4ac734]
/path/to/perf[0x4ac829]
/path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9]
/path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1]
/path/to/perf(perf_session__new+0x168)[0x4bd458]
/path/to/perf(cmd_report+0xfa0)[0x43eb70]
/path/to/perf[0x47adc3]
/path/to/perf(main+0x5f6)[0x42fd06]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5]
/path/to/perf[0x42fe35]
======= Memory map: ========
[SNIP]
The bug is in perf_event__attr_swap(). It swaps all fields in 'struct
perf_event_attr' without checking whether the swapped field exist or
not. In addition, in read_event_desc() allocs memory for attr according
to size read from perf.data.
Therefore, if the perf.data is collected by an old perf (without
aux_watermark, for example), when perf_event__attr_swap() swaping
attr->aux_watermark it destroy malloc's metadata.
This patch introduces boundary checking in perf_event__attr_swap(). It
adds macros bswap_field_64 and bswap_field_32 into
perf_event__attr_swap() to make it only swap exist fields.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit fcfd6611fb ("tools build: Add
detected config support") dynamically creates .config-detected. Add it
to .gitignore.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434542358-5430-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I copied the wrong shell code into the documentation. Sorry to all who
tried to get sense out of this current example :/ Slight rewording while
we are here.
Reported-by: Tim Bakker <bakkert@mymail.vcu.edu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
When the following filter is used it causes a warning to trigger:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: No error
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990()
Modules linked in: bnep lockd grace bluetooth ...
CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0
0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c
ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea
Call Trace:
[<ffffffff816ed4f9>] dump_stack+0x4c/0x6e
[<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0
[<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80
[<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81159065>] replace_preds+0x3c5/0x990
[<ffffffff811596b2>] create_filter+0x82/0xb0
[<ffffffff81159944>] apply_event_filter+0xd4/0x180
[<ffffffff81152bbf>] event_filter_write+0x8f/0x120
[<ffffffff811db2a8>] __vfs_write+0x28/0xe0
[<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0
[<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0
[<ffffffff811dc408>] vfs_write+0xb8/0x1b0
[<ffffffff811dc72f>] SyS_write+0x4f/0xb0
[<ffffffff816f5217>] system_call_fastpath+0x12/0x6a
---[ end trace e11028bd95818dcd ]---
Worse yet, reading the error message (the filter again) it says that
there was no error, when there clearly was. The issue is that the
code that checks the input does not check for balanced ops. That is,
having an op between a closed parenthesis and the next token.
This would only cause a warning, and fail out before doing any real
harm, but it should still not caues a warning, and the error reported
should work:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: Meaningless filter expression
And give no kernel warning.
Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: stable@vger.kernel.org # 2.6.31+
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a new rsa generic SW implementation.
This implements only cryptographic primitives.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Added select on ASN1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Public Key Encryption API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Made CRYPTO_AKCIPHER invisible like other type config options.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Poly1305 authenticator requires a unique key for each generated tag. This
implies that we can't set the key per tfm, as multiple users set individual
keys. Instead we pass a desc specific key as the first two blocks of the
message to authenticate in update().
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 9b9f9296a7b73fbafe0a0a6f2494eaadd97f9f73 as
all in-kernel implementations of GCM have been converted to the
new AEAD interface, meaning that they should now pass the updated
rfc4543 test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the caam GCM implementations to the new AEAD
interface. This is compile-tested only.
Note that all IV generation for GCM algorithms have been removed.
The reason is that the current generation uses purely random IVs
which is not appropriate for counter-based algorithms where we
first and foremost require uniqueness.
Of course there is no reason why you couldn't implement seqiv or
seqniv within caam since all they do is xor the sequence number
with a salt, but since I can't test this on actual hardware I'll
leave it alone for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently dma_map_sg_chained does not handle errors from the
underlying dma_map_sg calls. This patch adds rollback in case
of an error by simply calling dma_unmap_sg_chained for the ones
that we've already mapped.
All current callers ignore the return value so this should have
no impact on them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the nx GCM implementations to the new AEAD
interface. This is compile-tested only.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the rfc4543 test vectors to the new format
where the IV is part of the AD. For now these vectors are still
unused. They will be reactivated once all rfc4543 implementations
have migrated.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts generic gcm and its associated transforms to
the new AEAD interface. The biggest reward is in code reduction
for rfc4543 where it used to do IV stitching which is no longer
needed as the IV is already part of the AD on input.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because the old rfc4543 implementation always injected an IV into
the AD, while the new one does not, we have to disable the test
while it is converted over to the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
by adding the missing MODULE_ALIAS(), cpufreq-dt
can be autoloaded by udev/systemd.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Physical buttons do not use F30 to report their state and in some cases the
data reported in F30 is incorrect and inconsistent with what is reported by
the HID descriptor. When physical buttons are present, ignore F30 and let
hid-input report buttons based on what is defined in the HID descriptor.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix perf probe to return an error if no probe is added due to the given
probe point being on the blacklist.
To fix this problem, this moves the blacklist checking to right after
finding symbols/probe-points and marks them as skipped.
If all the symbols are skipped, "perf probe" returns an error as it
fails to find the corresponding probe address.
E.g. currently if a blacklisted probe is given:
# perf probe do_trap && echo 'succeed'
Added new event:
Warning: Skipped probing on blacklisted function: sync_regs
succeed
No! It must fail! With this patch, it correctly fails:
# perf probe do_trap && echo 'succeed'
do_trap is blacklisted function, skip it.
Probe point 'do_trap' not found.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115055.19906.31359.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libunwind is on, there is a compile error as :
util/unwind-libunwind.c:363:21: error: 'dso' undeclared (first use in this function)
dso__data_put_fd(dso);
This patch fixes it.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 4bb11d012a ("perf tools: Add dso__data_get/put_fd()")
Link: http://lkml.kernel.org/r/1434453395-10560-1-git-send-email-houpengyang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to have 'struct thread_map' allocation on single place and can
change it easily in following patch.
Using alloc|realloc for static helpers, because thread_map__new is
already used in public interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To zero all the xyarray contents. It will be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 5e17b28f1e ("perf probe: Add --quiet option to
suppress output result message") have replaced printf with pr_info,
perf probe -l outputs its result in stderr. However, that is not
what the commit expected.
E.g.:
# perf probe -l > /dev/null
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
With this fix:
# perf probe -l > list
# cat list
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
Of course, --quiet(-q) still works on --add/--del.
# perf probe -q vfs_write
# perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
probe:vfs_write (on vfs_write@ksrc/linux-3/fs/read_write.c)
-----
Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150613013116.24402.2923.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make build-test' finds an error that make_python_perf_so fails due to
missing of libtraceevent-dynamic-list:
'.../python2' util/setup.py \
--quiet build_ext; \
mkdir -p python && \
cp python_ext_build/lib/perf.so python/
/path/to/ld: cannot open linker script file /path/to/kernel/tools/lib/traceevent/libtraceevent-dynamic-list: No such file or directory
collect2: error: ld returned 1 exit status
error: command 'x86_64-linux-gcc' failed with exit status 1
cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
make[3]: *** [python/perf.so] Error 1
make[2]: *** [python/perf.so] Error 2
test: test -f ./python/perf.so
make[1]: *** [make_python_perf_so] Error 1
make: *** [build-test] Error 2
make: Leaving directory `/path/to/kernel/tools/perf'
This is caused by commit e3d09ec812
("tools lib traceevent: Export dynamic symbols used by traceevent
plugins") that, it adds the list file to LDFLAGS but forgot to add it to
dependency list of python/perf.so.
This patch fixes this problem.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434079031-123162-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use just reference counts, so that when no more hist_entry instances
references a map and the thread instance goes away by processing a
PERF_RECORD_EXIT, we can delete the maps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oym7lfhcc7ss6xpz44h7nbxs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use "u32", not "uint32_t", for consistency. Use "tmp", not "temp", for
consistency within the driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
When CONFIG_SND_HDA_I915=n, we get a compile warning:
sound/pci/hda/hda_intel.c: In function ‘azx_probe_continue’:
sound/pci/hda/hda_intel.c:1882:2: warning: label ‘skip_i915’ defined but not used [-Wunused-label]
Fix it by putting again ifdef to it. Sigh.
Fixes: bf06848bdb ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during a Suspend-to-RAM. This means that if a
IRQ is used as a source, the interrupts for the devices are disabled
when the system is resumed from a sleep state so are not triggered.
Save the interrupt enable set register for each combiner group and
restore it after resume to make sure that the interrupts are enabled.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Chanho Park <parkch98@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: http://lkml.kernel.org/r/1434087795-13990-1-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fixes some issues given by checkpatch. Fixes include
bracket placement, spacing and indenting.
Signed-off-by: Daniel Lockyer <thisisdaniellockyer@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now pcf857x_irq() IRQ's dispatcher will try to run nested
IRQ handlers for each GPIO pin which state has changed.
Such IRQs are, actually, spurious and nested IRQ handlers
have to be called only for IRQs wich were enabled by users.
This is not critical issue - just /proc/interrupts
will display counters for unused IRQS:
399: 4 0 pcf857x 0 Edge
428: 1 0 pcf857x 13 Edge
430: 1 0 pcf857x 15 Edge
Hence, fix it by adding irq_enabled field in struct pcf857x to track
enabled GPIO IRQs and corresponding callbacks in pcf857x_irq_chip.
Similar functionality was presented in pcf857x driver, commit
21fd3cd187 ('gpio: pcf857x: call the gpio user handler iff...')
and then it was removed by commit
a39294bdf4 ('gpio: pcf857x: Switch to use gpiolib irqchip...')
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: a39294bdf4 ('gpio: pcf857x: Switch to use gpiolib irqchip helpers')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
