Added DTMF mixer routing for QUAT_TDM_RX2 for automotive. Also added
the DTMF front-end dai to apq8096 driver.
Change-Id: I3652efd939774ff8cb7c40445747f0edbf6b3c7f
Signed-off-by: Timothy Sham <tsham@codeaurora.org>
cgroupstats_cmd_get_policy is [CGROUPSTATS_CMD_ATTR_MAX+1],
taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1],
but their family.maxattr is TASKSTATS_CMD_ATTR_MAX.
CGROUPSTATS_CMD_ATTR_MAX is less than TASKSTATS_CMD_ATTR_MAX,
so we could end up accessing out-of-bound.
Change cgroupstats_cmd_get_policy to TASKSTATS_CMD_ATTR_MAX+1,
this is safe because the rest are initialized to 0's.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-commit: 243d52126184b072a18fe2130ce0008f8aa3a340
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Change-Id: Ie03c41de881d8e0e88ba35f5369e4e955d8d8682
CRs-Fixed: 2234354
Signed-off-by: Jeff Johnson <jjohnson@codeaurora.org>
* refs/heads/tmp-d5d6526
Linux 4.4.131
serial: mctrl_gpio: Add missing module license
serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
libceph: validate con->state at the top of try_write()
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
ARM: amba: Fix race condition with driver_override
ARM: amba: Make driver_override output consistent with other buses
scsi: sd: Defer spinning up drive while SANITIZE is in progress
kobject: don't use WARN for registration failures
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
ALSA: hda/realtek - Add some fixes for ALC233
ALSA: hda: Hardening for potential Spectre v1
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
ALSA: control: Hardening for potential Spectre v1
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: opl3: Hardening for potential Spectre v1
tty: Use __GFP_NOFAIL for tty_ldisc_get()
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
tty: Don't call panic() at tty_ldisc_init()
drm/virtio: fix vq wait_event condition
virtio_console: free buffers after reset
virtio: add ability to iterate over vqs
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
USB: Increment wakeup count on remote wakeup.
usb: core: Add quirk for HP v222w 16GB Mini
USB: serial: cp210x: add ID for NI USB serial console
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster
USB: serial: simple: add libtransistor console
usbip: vhci_hcd: Fix usb device and sockfd leaks
usbip: usbip_host: fix to hold parent lock for device_attach() calls
ext4: fix bitmap position validation
ext4: add validity checks for bitmap block numbers
ext4: set h_journal if there is a failure starting a reserved handle
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
goldfish: pipe: ANDROID: Allocate memory with GFP_KERNEL.
goldfish: pipe: ANDROID: Do not crash
goldfish: pipe: ANDROID: remove redundant casting
goldfish: pipe: ANDROID: Add 'pipe' to pipe functions
goldfish: pipe: ANDROID: fix whitespace
goldfish: pipe: ANDROID: rename global variables
goldfish: pipe: ANDROID: remove a redundant target
goldfish: pipe: ANDROID: add blank lines
goldfish: pipe: ANDROID: replace 'BUG_ON' with 'BUILD_BUG_ON'
goldfish: pipe: ANDROID: use the 'BIT' macro for wakeup flags
goldfish: pipe: ANDROID: fix logging format strings
Linux 4.4.130
s390/uprobes: implement arch_uretprobe_is_alive()
s390/cio: update chpid descriptor after resource accessibility event
cdrom: information leak in cdrom_ioctl_media_changed()
scsi: mptsas: Disable WRITE SAME
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
net: af_packet: fix race in PACKET_{R|T}X_RING
tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
net: fix deadlock while clearing neighbor proxy table
tipc: add policy for TIPC_NLA_NET_ADDR
llc: fix NULL pointer deref for SOCK_ZAPPED
llc: hold llc_sap before release_sock()
sctp: do not check port in sctp_inet6_cmp_addr
vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi
pppoe: check sockaddr length in pppoe_connect()
packet: fix bitfield update race
team: fix netconsole setup over team
team: avoid adding twice the same option to the event list
tcp: don't read out-of-bounds opsize
llc: delete timers synchronously in llc_sk_free()
net: validate attribute sizes in neigh_dump_table()
l2tp: check sockaddr length in pppol2tp_connect()
KEYS: DNS: limit the length of option strings
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
s390: correct module section names for expoline code revert
s390: correct nospec auto detection init order
s390: add sysfs attributes for spectre
s390: report spectre mitigation via syslog
s390: add automatic detection of the spectre defense
s390: move nobp parameter functions to nospec-branch.c
s390/entry.S: fix spurious zeroing of r0
s390: do not bypass BPENTER for interrupt system calls
s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*)
s390: introduce execute-trampolines for branches
s390: run user space and KVM guests with modified branch prediction
s390: add options to change branch prediction behaviour for the kernel
s390/alternative: use a copy of the facility bit mask
s390: add optimized array_index_mask_nospec
s390: scrub registers on kernel entry and KVM exit
KVM: s390: wire up bpb feature
s390: enable CPU alternatives unconditionally
s390: introduce CPU alternatives
Revert "ath10k: send (re)assoc peer command when NSS changed"
jbd2: fix use after free in kjournald2()
ath9k_hw: check if the chip failed to wake up
Input: drv260x - fix initializing overdrive voltage
r8152: add Linksys USB3GIGV1 id
staging: ion : Donnot wakeup kswapd in ion system alloc
perf: Return proper values for user stack errors
x86/tsc: Prevent 32bit truncation in calc_hpet_ref()
cifs: do not allow creating sockets except with SMB1 posix exensions
UPSTREAM: tracing: always define trace_{irq,preempt}_{enable_disable}
ANDROID: staging: ion: Obey kptr_restrict
ANDROID: sdcardfs: Set s_root to NULL after putting
ANDROID: sdcardfs: d_make_root calls iput
ANDROID: sdcardfs: Check for private data earlier
Conflicts:
drivers/staging/android/ion/ion.c
drivers/staging/android/ion/ion_cma_heap.c
drivers/staging/android/ion/ion_system_heap.c
Change-Id: I8155103b3787bb800f85291cc7378a8e29a8436f
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Currently hwirq number is used to get descriptor for irq
in gic_show_resume_irq function which returns incorrect
irq descriptor.
Update it to use correct irq number using irq_find_mapping.
Change-Id: Ib61ebcb3d5e520566b157ee5781d11b70d0f513d
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Just printing the irq number is not informative. Update the code
to show the name of the interrupt's irq action.
Change-Id: Ia3e7d37948860b23d4390808769cd198656eba48
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This change is to satisfy the logging requirement of
wakeup interrupts. Add code to log the trigger status
of wakeup interrupts. This helps in debugging
the cause of wakeup when the system is suspended
Change-Id: I0f724296f9133433cdbc3271a9b91c6fa992a2ff
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
While in suspend state, the system should not wake up due to triggering
of a non wakeup interrupt. Implement suspend and resume functions to be
called from power management code to switch enabled interrupts between
wakeup set or normal set.
Change-Id: Iaceae286707460eadc5f05c0baef72b43c942777
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
commit 4d09122c1868 ("sched: Fix spinlock recursion in sched_exit()")
moved freeing of task's current and previous window arrays outside
the rq->lock. These arrays can be accessed from another CPU in parallel
and end up using freed memory. For example,
CPU#0 CPU#1
---------------------------------- -------------------------------
sched_exit() try_to_wake_up()--> The task wakes
up on CPU#0
task_rq_lock() set_task_cpu()
fixup_busy_time() --> waiting for
CPU#0's rq->lock
task_rq_unlock() fixup_busy_time()-->lock acquired
free_task_load_ptrs()
kfree(p->ravg.curr_window_cpu) update_task_ravg()-->called on
current of CPU#0
trace_sched_update_task_ravg()
--> access freed memory
p->ravg.curr_window_cpu = NULL;
To fix this issue, window array pointers must be set to NULL before
freeing the memory. Since this happens outside the lock, memory barriers
are needed on write and read paths. A much simpler alternative would be
skipping update_task_ravg() trace point for tasks that are marked as dead.
The window stats of dead tasks are not updated any ways. While at it, skip
this trace point for newly created tasks for which also window stats are
not updated.
Change-Id: I4d7cb8a3cf7cf84270b09721140d35205643b7ab
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
[spathi@codeaurora.org: moved changes to hmp.c since EAS is not supported]
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Sometimes a GPIO is fetched with NULL as parent device, and
that is just fine. So under these circumstances, avoid using
dev_name() to provide a name for the GPIO line.
Change-Id: Iacf2ef35d50118cd755e26ed4211c3c4b1289ff2
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Git-commit: 7d18f0a14aa6a0d6bad39111c1fb655f07f71d59
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=donq
-----END PGP SIGNATURE-----
Merge 4.4.131 into android-4.4
Changes in 4.4.131
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
ext4: set h_journal if there is a failure starting a reserved handle
ext4: add validity checks for bitmap block numbers
ext4: fix bitmap position validation
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: vhci_hcd: Fix usb device and sockfd leaks
USB: serial: simple: add libtransistor console
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster
USB: serial: cp210x: add ID for NI USB serial console
usb: core: Add quirk for HP v222w 16GB Mini
USB: Increment wakeup count on remote wakeup.
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
virtio: add ability to iterate over vqs
virtio_console: free buffers after reset
drm/virtio: fix vq wait_event condition
tty: Don't call panic() at tty_ldisc_init()
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: Use __GFP_NOFAIL for tty_ldisc_get()
ALSA: opl3: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: control: Hardening for potential Spectre v1
ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: hda: Hardening for potential Spectre v1
ALSA: hda/realtek - Add some fixes for ALC233
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
kobject: don't use WARN for registration failures
scsi: sd: Defer spinning up drive while SANITIZE is in progress
ARM: amba: Make driver_override output consistent with other buses
ARM: amba: Fix race condition with driver_override
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
libceph: validate con->state at the top of try_write()
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
x86/smpboot: Don't use mwait_play_dead() on AMD systems
serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init
serial: mctrl_gpio: Add missing module license
Linux 4.4.131
Change-Id: I8be9780b3f588b6ca9499b2f31ee4be0dbc9ef77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 82a3f87f6e80e0bf7978152021eb8938976721cb upstream.
As the mctrl_gpio driver can be built as a module, it needs to have its
license specified with MODULE_LICENSE. Otherwise, it cannot access
required symbols exported through EXPORT_SYMBOL_GPL.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Wagner <wagi@monom.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f71a2e0a282611e55bacb60b564eaef5d16c27b upstream.
To be able to make use of the mctrl-gpio helper from a module these
functions must be exported. This was forgotten in the commit introducing
support interrupt handling for these functions (while it was done for
mctrl_gpio_enable_ms, *sigh*).
Fixes: ce59e48fdb ("serial: mctrl_gpio: implement interrupt handling")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Daniel Wagner <wagi@monom.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6fa7ef67f07108a1b0cb9fd9e7fcaabd39c051 upstream.
Recent AMD systems support using MWAIT for C1 state. However, MWAIT will
not allow deeper cstates than C1 on current systems.
play_dead() expects to use the deepest state available. The deepest state
available on AMD systems is reached through SystemIO or HALT. If MWAIT is
available, it is preferred over the other methods, so the CPU never reaches
the deepest possible state.
Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE
to enter the deepest state advertised by firmware. If CPUIDLE is not
available then fallback to HALT.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a512c0882bd311c5b5561840fcfbe4c25b8f319 upstream.
A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout
(as seen from user space) a few years ago: Originally, __BITS_PER_LONG
was defined as 64 on x32, so we did not have padding after the 64-bit
__kernel_time_t fields, After __BITS_PER_LONG got changed to 32,
applications would observe extra padding.
In other parts of the uapi headers we seem to have a mix of those
expecting either 32 or 64 on x32 applications, so we can't easily revert
the path that broke these two structures.
Instead, this patch decouples x32 from the other architectures and moves
it back into arch specific headers, partially reverting the even older
commit 73a2d096fd ("x86: remove all now-duplicate header files").
It's not clear whether this ever made any difference, since at least
glibc carries its own (correct) copy of both of these header files,
so possibly no application has ever observed the definitions here.
Based on a suggestion from H.J. Lu, I tried out the tool from
https://github.com/hjl-tools/linux-header to find other such
bugs, which pointed out the same bug in statfs(), which also has
a separate (correct) copy in glibc.
Fixes: f4b4aae182 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . J . Lu" <hjl.tools@gmail.com>
Cc: Jeffrey Walton <noloader@gmail.com>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180424212013.3967461-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c55ad1c214d9f8c4594ac2c3fa392c1c32431a7 upstream.
ceph_con_workfn() validates con->state before calling try_read() and
then try_write(). However, try_read() temporarily releases con->mutex,
notably in process_message() and ceph_con_in_msg_alloc(), opening the
window for ceph_con_close() to sneak in, close the connection and
release con->sock. When try_write() is called on the assumption that
con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock
gets passed to the networking stack:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: selinux_socket_sendmsg+0x5/0x20
Make sure con->state is valid at the top of try_write() and add an
explicit BUG_ON for this, similar to try_read().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/23706
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c656941df9bc80f7ec65b92ca73c42f8b0b62628 upstream.
When the desired ratio is less than 256, the savesub (tolerance)
in the calculation would become 0. This will then fail the loop-
search immediately without reporting any errors.
But if the ratio is smaller enough, there is no need to calculate
the tolerance because PM divisor alone is enough to get the ratio.
So a simple fix could be just to set PM directly instead of going
into the loop-search.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2ffed5185df9d8d9ccd150e4340e3b6f96a8381 upstream.
When printing the driver_override parameter when it is 4095 and 4094
bytes long, the printing code would access invalid memory because we
need count + 1 bytes for printing.
Cfr. commits 4efe874aac ("PCI: Don't read past the end of sysfs
"driver_override" buffer") and bf563b01c2895a4b ("driver core: platform:
Don't read past the end of "driver_override" buffer").
Fixes: 3cf3857134 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f53624662eaac89598641cee6cd54fc192572d9 upstream.
For AMBA devices with unconfigured driver override, the
"driver_override" sysfs virtual file is empty, while it contains
"(null)" for platform and PCI devices.
Make AMBA consistent with other buses by dropping the test for a NULL
pointer.
Note that contrary to popular belief, sprintf() handles NULL pointers
fine; they are printed as "(null)".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 505aa4b6a8834a2300971c5220c380c3271ebde3 upstream.
A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ
0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS").
Prevent spinning up the drive until this condition clears.
[mkp: tweaked commit message]
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b70eb14392a7cf505f9b358d06c33b5af73d1e7 upstream.
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Taken from cfi_cmdset_0001 driver.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46a16a2283f9e678a4e26829175e0c37a5191860 upstream.
Some Micron chips does not work well wrt Erase suspend for
boot blocks. This avoids the issue by not allowing Erase suspend
for the boot blocks for the 28F00AP30(1GBit) chip.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6510bbc88e3258631831ade49033537081950605 upstream.
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea04a1dbf8b1d6af759d58e705636fde48583f8f upstream.
Fill COEF to change EAPD to verb control.
Assigned codec type.
This is an additional fix over 92f974df34 ("ALSA: hda/realtek - New
vendor ID for ALC233").
[ More notes:
according to Kailang, the chip is 10ec:0235 bonding for ALC233b,
which is equivalent with ALC255. It's only used for Lenovo.
The chip needs no alc_process_coef_fw() for headset unlike ALC255. ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69fa6f19b95597618ab30438a27b67ad93daa7c7 upstream.
As recently Smatch suggested, one place in HD-audio hwdep ioctl codes
may expand the array directly from the user-space value with
speculation:
sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps'
As get_wcaps() itself is a fairly frequently called inline function,
and there is only one single call with a user-space value, we replace
only the latter one to open-code locally with array_index_nospec()
hardening in this patch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d218dd8116695ecda7164f97631c069938aa22e upstream.
As Smatch recently suggested, a few places in OSS sequencer codes may
expand the array directly from the user-space value with speculation,
namely there are a significant amount of references to either
info->ch[] or dp->synths[] array:
sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap)
sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths'
Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.
We may put array_index_nospec() at each place, but here we take a
different approach:
- For dp->synths[], change the helpers to retrieve seq_oss_synthinfo
pointer directly instead of the array expansion at each place
- For info->ch[], harden in a normal way, as there are only a couple
of places
As a result, the existing helper, snd_seq_oss_synth_is_valid() is
replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device
where a similar array expansion is done, too, although it wasn't
reported by Smatch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5e94b4c6ebdabe0f602d796e0430180927521a0 upstream.
When get_synthdev() is called for a MIDI device, it returns the fixed
midi_synth_dev without the use refcounting. OTOH, the caller is
supposed to unreference unconditionally after the usage, so this would
lead to unbalanced refcount.
This patch corrects the behavior and keep up the refcount balance also
for the MIDI synth device.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f853dcaae2f5bbe021161e421bd1576845bae8f6 upstream.
It looks like a simple mistake that this struct member
was forgotten.
Audio_tstamp isn't used much, and on some archs (such as x86) this
ioctl is not used by default, so that might be the reason why this
has slipped for so long.
Fixes: 4eeaaeaea1 ("ALSA: core: add hooks for audio timestamps")
Signed-off-by: David Henningsson <diwic@ubuntu.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 088e861edffb84879cf0c0d1b02eda078c3a0ffe upstream.
As recently Smatch suggested, a few places in ALSA control core codes
may expand the array directly from the user-space value with
speculation:
sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd'
Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.
In this patch, we put array_index_nospec() to the common
snd_ctl_get_ioff*() helpers instead of each caller. These helpers are
also referred from some drivers, too, and basically all usages are to
calculate the array index from the user-space value, hence it's better
to cover there.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f526afcd8f71945c23ce581d7864ace93de8a4f7 upstream.
As recently Smatch suggested, one place in RME9652 driver may expand
the array directly from the user-space value with speculation:
sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap)
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10513142a7114d251670361ad40cba2c61403406 upstream.
As recently Smatch suggested, a couple of places in HDSP MADI driver
may expand the array directly from the user-space value with
speculation:
sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap)
sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap)
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9d94b57e30fd1575b4935045b32d738668aa74b upstream.
As recently Smatch suggested, a couple of places in ASIHPI driver may
expand the array directly from the user-space value with speculation:
sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap)
sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters'
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f054a5bee0987f1e2d4e59daea462421c76f2cb upstream.
As recently Smatch suggested, one place in OPL3 driver may expand the
array directly from the user-space value with speculation:
sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap'
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcdd0ca8cb8730573afebcaae4138f8f4c8eaa20 upstream.
syzbot is reporting crashes triggered by memory allocation fault injection
at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we
have tried commit 5362544bebe85071 ("tty: don't panic on OOM in
tty_set_ldisc()"). But we reverted that attempt by commit a8983d01f9b7d600
("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible
crash. We should spend resource for finding and fixing race condition bugs
rather than complicate error paths for 2 * sizeof(void *) bytes allocation
failure.
[1] https://syzkaller.appspot.com/bug?id=489d33fa386453859ead58ff5171d43772b13aa3
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2d89ad9c9682e795ed6eeb9ed455789ad6cedf1 upstream.
At least on droid 4 with control channel in ADM mode, there is no response
to Modem Status Command (MSC). Currently gsmtty_modem_update() expects to
have data in dlci->modem_rx unless debug & 2 is set. This means that on
droid 4, things only work if debug & 2 is set.
Let's fix the issue by ignoring empty dlci->modem_rx for ADM mode. In
the AMD mode, CMD_MSC will never respond and gsm_process_modem() won't
get called to set dlci->modem_rx.
And according to ts_127010v140000p.pdf, MSC is only relevant if basic
option is chosen, so let's test for that too.
Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci")
Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9ec22547986dd32c5c70da78107ce35dbff1344 upstream.
Commit ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for
control dlci") added support for DLCI to stay in Asynchronous Disconnected
Mode (ADM). But we still get long delays waiting for commands to other
DLCI to complete:
--> 5) C: SABM(P)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
...
This happens because gsm_control_send() sets cretries timer to T2 that is
by default set to 34. This will cause resend for T2 times for the control
frame. In ADM mode, we will never get a response so the control frame, so
retries are just delaying all the commands.
Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM
mode for the control DLCI. Then we can use that in gsm_control_send() to
set retries to 1. This means the control frame will be sent once allowing
the other end at an opportunity to switch from ADM to ABM mode.
Note that retries will be decremented in gsm_control_retransmit() so
we don't want to set it to 0 here.
Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci")
Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
