Realtek RT5640 uses ACPI ID "10EC5640" for Intel Baytrail platforms.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The rate constraints in this driver are shared between all device instances. It
should not be (and is not) modified at runtime, so make them const.
While we are at it also change the type for the rates array from u32 to unsigned
int.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Bug reporter report that the -mode4 makes the subwoofer work.
I have simplified the quirk a bit to avoid possible regressions
with the microphones.
BugLink: https://bugs.launchpad.net/bugs/871808
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a small refactoring to make the next patch slightly simpler.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The very same fixup is needed to make the mic on Sony VAIO Pro 11
working as well as VAIO Pro 13 model.
Reported-and-tested-by: Hendrik-Jan Heins <hjheins@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code for controlling mic mute LED in patch_sigmatel.c
blindly assumes that there is a single capture switch. But, there can
be multiple multiple ones, and each of them flips the state, ended up
in an inconsistent state.
For fixing this problem, this patch adds kcontrol to be passed to the
hook function so that the callee can check which switch is being
accessed. In stac_capture_led_hook(), the state is checked as a
bitmask, and turns on the LED when all capture switches are off.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the commit [595fe1b702: ALSA: hda - Make
CONFIG_SND_HDA_CODEC_* tristate], the kconfig variables for the
generic parser and codec drivers can be "m" instead of boolean, but
some codes are left unchanged to check only #ifdef
CONFIG_SND_HDA_CODEC_XXX, which is no longer true for modules.
This patch fixes them by replacing with IS_ENABLED() macros.
Fixes: 595fe1b702 ('ALSA: hda - Make CONFIG_SND_HDA_CODEC_* tristate')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70161
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the core now takes const strings for enums we should be constifying
them (and the regulator supplies while we're at it).
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The PCM512x devices are a family of monolithic CMOS integrated circuits
that include a stereo digital-to-analog converter and additional support
circuitry.
This is an initial driver which supports some core functionality for the
device which covers common use cases but does not cover all features.
Currently only slave clocking modes with automatic clock configuration
are supported and most of the DSP configuration for the device is not
enabled.
Signed-off-by: Mark Brown <broonie@linaro.org>
SNDRV_PCM_RATE_KNOT means that the device can support rates that can not be
expressed using the rate bits. The driver will provide a list of those rates
specified through constraints. Any rate bits that are set in the rates mask will
be ignored. So setting other rate bits besides SNDRV_PCM_RATE_KNOT wont have any
effect, but might be confusing to the casual reader, so remove them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Commit 1b1861ead ("ASoC: cs4271: convert to direct regmap API usage") removed
the bus_type field from the cs4271_private struct, but left the comment that
described the field in there. This patch removes the comment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
AD1983 has flexible loopback routes and the generic parser would take
wrong path confusingly instead of taking individual paths via NID 0x0c
and 0x0d. For avoiding it, limit the connections at these widgets so
that the parser can think more straightforwardly. This fixes the
regression of the missing line-in loopback on Dell machine.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mac Pro 1,1 with ALC889A codec needs the VREF setup on NID 0x18 to
VREF50, in order to make the speaker working. The same fixup was
already needed for MacBook Air 1,1, so we can reuse it.
Reported-by: Nicolai Beuermann <mail@nico-beuermann.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer widget on AD1983 at NID 0x0e was missing in the commit
[f2f8be43c5: ALSA: hda - Add aamix NID to AD codecs].
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've seen often problems after suspend/resume on Acer Aspire One
AO725 with ALC271X codec as reported in kernel bugzilla, and it turned
out that some COEFs doesn't work and triggers the codec communication
stall.
Since these magic COEF setups are specific to ALC269VB for some PLL
configurations, the machine works even without these manual
adjustment. So, let's simply avoid applying them for ALC271X.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we have a generic card driver we can't rely on the card driver
selecting the CODECs for us so make the CODECs that can be enabled with
OF directly selectable in Kconfig. For the platforms not using OF it's
not clear that we don't still want to have some board specific selection
since the kernel needs to contain code to register the devices; ACPI could
provide this from firmware does not yet support any kind of generic card.
It may also be desirable to hide these if OF is not enabled to reduce
noise.
Signed-off-by: Mark Brown <broonie@linaro.org>
Toshiba Satellite L40 with AD1986A codec requires the EAPD of NID 0x1b
to be constantly on, otherwise the output doesn't work.
Unlike most of other AD1986A machines, EAPD is correctly implemented
in HD-audio manner (that is, bit set = amp on), so we need to clear
the inv_eapd flag in the fixup, too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67481
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Individual components are not supposed to modify the runtime->hw struct itself
as it is manged by the ASoC core. If a component wants to limit the list of
supported rates it should set a rate constraint. The rx1950_uda1380 already does
this, so it is safe to just remove the code that modifies runtime->hw.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Individual components are not supposed to modify the runtime->hw struct itself
as it is manged by the ASoC core. If a component wants to limit the list of
supported rates it should set a rate constraint. The h1940_uda1380 already does
this, so it is safe to just remove the code that modifies runtime->hw.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Move the context register storage behind of a struct and use a pointer to
it in the suspend/resume callbacks to remove the long lines.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Rename the struct for the platform data:
snd_platform_data -> davinci_mcasp_pdata
Since we have users under arch/arm/mach-davinci/ for this struct add
temporary define to avoid breakage. The arch code can be updated later to
use the new struct name.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Rearrange the code in the function for readability.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This will help support future enhancements in the way we negotiate
parameters in the core.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Don't record the FLL as having started and leave the hardware disabled
ensuring we are in a better state if this does happen to be a transient
error and making debugging easier.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
If the device is runtime suspended then we can't interact with it as it
may have been powered off and the register map will be in cache only
mode.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Add DT support for this codec. The bindings differ a bit from the aic3x
codec bindings, so I created a new binding documentation.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are a number of mixer controls that support negative values. They
use signed values for this with different number of bits for the values.
Currently they only support the positive range.
This patch replaces the unsigned mixers with signed mixers to support
the full range.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
If the DT is used and the CPU DAI device has only one DAI, the card
name will be like :
ALSA device list:
0: 40031000.sai-sgtl5000
And this name maybe a little ugly to some customers, so here the
card name parsing from DT node is supported.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
In the asoc_simple_card_parse_of() will parse the device node's CPU/CODEC
DAI commone fmts, and then in asoc_simple_card_sub_parse_of() will parse
the CPU/CODEC DAI's sub-node fmts, so we can combine the info->daifmt and
info->set.fmt in asoc_simple_card_sub_parse_of() not while just before
_set_fmt().
And this will be more easy to add new functions, such as supporting
_set_tdm_slot(), etc.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
If the CPU/CODEC DAI set_sysclk() is not support, the -ENOTSUPP will returnd.
Here do the check like set_fmt().
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Rename the pointer to the private data structure to 'priv' to avoid confusion with the platform data pointer.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The platform data structure contains information which is used only by
the driver, and the driver allocates platform information fields which
are of no use.
Move the driver specific data to a new private structure and cleanup
the platform data structure.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
In the non-DT sequence, the platform data is copied as a whole to the
dynamic card info and the same pointer 'cinfo' is used to copy the
platform information to the card.
Use 'priv' as the pointer to the dynamic card info and copy only the
useful information from the platform data.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The CPU and CODEC DAI names are still copied to the user info structure.
Put them directly in the DAI links.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The OF pointers are put in the stack and then copied to the card
descriptor.
Put them directly at their right place.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The DT values are copied to the non-DT structure before being moved to
the card structure.
Set directly the DT values in the card and move the non-DT copy to the
non-DT sequence.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The check of the mandatory fields is done for DT in its specific sequence.
Move the global check to the non-DT sequence.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
