This change adjusts the bandwidth limits for the
mdp core in the v2 of msmcobalt.
Change-Id: I3559ed2b6984ac9cec8e219f59f634410aaf57c9
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
Update USB bus ib voting value to 100Mhz or 800000 kbps to allow
SVS when usb cable is connected.
Change-Id: I4692242f65bcf09baeab1a85681ec8c2f3b4cf61
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
To support Split A2DP over slimbus, it will share
slimbus port 16 with SCO channel. A2DP configuration
has been added into slimbus port 16.
Signed-off-by: Sungjun Park <sjpark@codeaurora.org>
Change-Id: I55bc9cda07ef3c2d3ff5713f1ce83d8b344bed6a
Currently qsee_ipc_irq_bridge driver is using an incorrect clear mask
when it handles an incoming level triggered interrupt. This causes
an interrupt storm.
Update the IRQ clear mask entry to appropriate value.
CRs-Fixed: 1053076
Change-Id: I6bfe7aecd73a13401a218e89874f2225ac91d18f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Currently the driver checks for interrupt type and subsytem name before
parsing the RX IRQ Reset Regiser. Checking for the subsystem name is
redundant and prone to typo errors which will lead to incorrect parsing
of Device Tree entries and eventually an interrupt storm.
Check only for the interrupt type and parse the Device Tree entries
completely.
CRs-Fixed: 1053076
Change-Id: I22719898b86534f1821104a6a629e7fd37b0d823
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
The UFS driver does not need the GDSC driver to set the core
and peripheral memory retention bits for certain UFS clocks
on it's behalf. Remove doing so.
CRs-Fixed: 1052994
Change-Id: I845eb2014056203d203ee6be66de0cc161c2dedb
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
In case of GPU idle (NAP), schedule DCVS call to obtain updated
GPU load for correct GPU frequency scaling.
Change-Id: Ifcf05ffde0a054839e51d3f8173b8449fe177aa0
CRs-Fixed: 1050000
Signed-off-by: Oleg Perelet <operelet@codeaurora.org>
Current sleep state entry compatible string is tied with
remote processor ID which is not always true.
Use generic compatible string for sleep state entry to
support for any remote processor ID.
CRs-Fixed: 1043377
Change-Id: I6ef2810b07960006b0fe4c573d5ce2bead90ee97
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Add sysfs entries to upgrade firmware from userspace.
Firmware upgrade is triggered when the device's firmware
version mismatches with userspace's firmware file.
Force firmware upgrade sysfs entry is added to force
the firmware upgrade even when the firmware versions
match.
Change-Id: I48189abe60b4bd9d54a1bbc4657707213d8eb166
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
QCOM_ICE_INVALID_CCFG_ERR_STTS is now also dumped in case of error
for ICE 3.0
Change-Id: Ib7f522d0143f5131880c8c1badf4e64461810e72
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
Add support for AFE encoder configuration.
Add new mixer controls to support AFE input channel
and encoder configuration.
Add support in AFE to set the encoder and input
channel configuration.If encoder configuration is set
ADSP will encode the PCM steam and send over backend.
Change-Id: I56581533ffff3b61f5b5ee128841ab61b62674d7
Signed-off-by: Naresh Tanniru <ntanniru@codeaurora.org>
Add support of route control to set ADM input channel
config. This is used to help open adm with different
channel config compare to AFE output.
Add new mixer command to override adm channel count set
by hw_params. This is useful in cases where BE hw_params
is different from the ADM channel configuration for cases
such as A2DP exercising ADSP path.
Change-Id: I93ad53016a28efe0d8592ac0092d6c8896a66072
Signed-off-by: Naresh Tanniru <ntanniru@codeaurora.org>
Set the memory retention flags for certain hardware clocks to
save power. Memory does not need to be retained for these
clocks since the driver reinitializes the FD hardware
whenever the clocks are turned on.
CRs-Fixed: 1044373
Change-Id: I7ffa9d7bd9c39696b2ca0c688fdc13ce947ae1c7
Signed-off-by: Gautham Mayyuri <gmayyuri@codeaurora.org>
Set the memory retention flags for certain hardware clocks to
save power. Memory does not need to be retained for these
clocks since the driver reinitializes the jpeg hardware
whenever the clocks are turned on.
CRs-Fixed: 1044373
Change-Id: Idd83064eaea2dee48b78a352a715633c04347217
Signed-off-by: Gautham Mayyuri <gmayyuri@codeaurora.org>
The axi clock is needed while voting for bus bandwidth and needs
to be turned on along with other cpp clocks, Remove cpp rcg clk.
CRs-Fixed: 1044777 1044373
Change-Id: I644cdf84c6cf71bcb8f4ea24c0efb9a3603ca435
Signed-off-by: Gautham Mayyuri <gmayyuri@codeaurora.org>
GDSC driver is removing control for USB memory power states.
DWC driver need to explicitly call clk_set_flag() API to turn
off both memory core and periphery upon vbus off. When core
clock is turned on both of them will be turn on automatically.
Change-Id: I7e442daf51c6ece39b8fe5cc8a38d3405163c9b5
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Add smmu iova address and size for ICNSS. It will be used to
attach to smmu driver.
CRs-Fixed: 1049889
Change-Id: I7aad55ba6ac69ad2ca7a8783bf4fdd8241d112cc
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Previously the dma fifo read watermark was set to default value
which is 1/2 full. The full FIFO size is 512B, and this means the
read would be blocked for the first 256B and as soon as it is
consumed, it might expect the next 256B immediately. This may
result in underflow if sufficient data is not produced. To avoid
such cases, set read watermark to 15/16, so it is blocked until
full FIFO size data is generated.
Change-Id: I39bd10ccb7db3c4fe37ea609babdd6305fc19a7d
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Previously, the error case for retire fence did not handle
removing of fence_install for release fence properly. Fix it
by doing sync_fence_install for both release/retire fence
after successful release/retire create_fence.
Change-Id: I6e983a1a1d843ddca46729c37a49cb85eda74cfe
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
