Running coccicheck on brcm80211 drivers resulted in following report:
$ make coccicheck MODE=report M=drivers/net/wireless/brcm80211
drivers/net/wireless/brcm80211/brcmfmac/pcie.c:595:2-43:
code aligned with following code on line 596
It revealed that due to a merge failure a block statement lost its
curly braces where it should not.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The driver assumes that endpoint 4 is always an interrupt endpoint.
Unfortunately the type differs between high-speed and full-speed
configurations while in the former case it is indeed an interrupt
endpoint this is not true for the latter case - here it is a bulk
endpoint. When sending URBs with the wrong type the kernel will
generate a warning message including backtrace. In this specific
case there will be a huge amount of warnings which can bring the system
to freeze.
To fix this we are now sending URBs to endpoint 4 using the type
found in the endpoint descriptor.
A side note: The carl9170 firmware currently specifies endpoint 4 as
interrupt endpoint even in the full-speed configuration but this has
no relevance because before this firmware is loaded the endpoint type
is as described above and after the firmware is running the stick is not
reenumerated and so the old descriptor is used.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
All callers of locks_copy_lock pass in a brand new file_lock struct, so
there's no need to call locks_release_private on it. Replace that with
a warning that fires in the event that we receive a target lock that
doesn't look like it's properly initialized.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Now that they are a distinct lease type, show them as such.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Don't print raw numbers, use port_name() and tell the user whether it's
long or short without having to figure out what the other magic number
means.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains fixes for your net tree, they are:
1) Unitialize the set element key and data from the commit path,
otherwise this leaks chain refcount if the transaction is aborted,
reported by Thomas Graf.
2) Fix crash when updating chains without no counters in nf_tables,
this slipped through in the new transaction infrastructure, reported
by Matteo Croce.
3) Replace all mutex_lock_interruptible() by mutex_lock() in the Netfilter
tree, suggested by Patrick McHardy. This implicitly fixes the problem
that Eric Dumazet reported in: http://patchwork.ozlabs.org/patch/373076/
4) Fix error return code in nf_tables when deleting set element in
nf_tables if the transaction cannot be allocated, from Julia Lawall.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 3.14 we had copy_tree() get the shadowing wrong - if we had one
vfsmount shadowing another (i.e. if A is a slave of B, C is mounted
on A/foo, then D got mounted on B/foo creating D' on A/foo shadowed
by C), copy_tree() of A would make a copy of D' shadow the the copy of
C, not the other way around.
It's easy to fix, fortunately - just make sure that mount follows
the one that shadows it in mnt_child as well as in mnt_hash, and when
copy_tree() decides to attach a new mount, check if the last child
it has added to the same parent should be shadowing the new one.
And if it should, just use the same logics commit_tree() has - put the
new mount into the hash and children lists right after the one that
should shadow it.
Cc: stable@vger.kernel.org [3.14 and later]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If DIO results in short write and sync write fails, we want to bugger off
whether the DIO part has written anything or not; the logics on the return
will take care of the right return value.
Cc: stable@vger.kernel.org [3.16]
Reported-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No mistery here: the seqno is still retrieved from the engine's
HW status page (the one in the default context. For the moment,
I see no reason to worry about other context's HWS page).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It needs to be anonymous memory (no file mappings)
and we are requried to install an MMU notifier.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whenever userspace mapping related to our userptr change
we wait for it to become idle and unmap it from GTT.
v2: rebased, fix mutex unlock in error path
v3: improve commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we test userptr availability at BO creation time instead of first use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid problems with writeback by limiting userptr to anonymous memory.
v2: add commit and code comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds an IOCTL for turning a pointer supplied by
userspace into a buffer object.
It imposes several restrictions upon the memory being mapped:
1. It must be page aligned (both start/end addresses, i.e ptr and size).
2. It must be normal system memory, not a pointer into another map of IO
space (e.g. it must not be a GTT mmapping of another object).
3. The BO is mapped into GTT, so the maximum amount of memory mapped at
all times is still the GTT limit.
4. The BO is only mapped readonly for now, so no write support.
5. List of backing pages is only acquired once, so they represent a
snapshot of the first use.
Exporting and sharing as well as mapping of buffer objects created by
this function is forbidden and results in an -EPERM.
v2: squash all previous changes into first public version
v3: fix tabs, map readonly, don't use MM callback any more
v4: set TTM_PAGE_FLAG_SG so that TTM never messes with the pages,
pin/unpin pages on bind/unbind instead of populate/unpopulate
v5: rebased on 3.17-wip, IOCTL renamed to userptr, reject any unknown
flags, better handle READONLY flag, improve permission check
v6: fix ptr cast warning, use set_page_dirty/mark_page_accessed on unpin
v7: add warning about it's availability in the API definition
v8: drop access_ok check, fix VM mapping bits
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v4)
Reviewed-by: Jérôme Glisse <jglisse@redhat.com> (v4)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Logical rings do not need most of the initialization their
legacy ringbuffer counterparts do: we just need the pipe
control object for the render ring, enable Execlists on the
hardware and a few workarounds.
v2: Squash with: "drm/i915: Extract pipe control fini & make
init outside accesible".
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Make checkpatch happy.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allocate and populate the default LRC for every ring, call
gen-specific init/cleanup, init/fini the command parser and
set the status page (now inside the LRC object). These are
things all engines/rings have in common.
Stopping the ring before cleanup and initializing the seqnos
is left as a TODO task (we need more infrastructure in place
before we can achieve this).
v2: Check the ringbuffer backing obj for ring_is_initialized,
instead of the context backing obj (similar, but not exactly
the same).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Execlists are indeed a brave new world with respect to workload
submission to the GPU.
In previous version of these series, I have tried to impact the
legacy ringbuffer submission path as little as possible (mostly,
passing the context around and using the correct ringbuffer when I
needed one) but Daniel is afraid (probably with a reason) that
these changes and, especially, future ones, will end up breaking
older gens.
This commit and some others coming next will try to limit the
damage by creating an alternative path for workload submission.
The first step is here: laying out a new ring init/fini.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As suggested by Daniel Vetter. The idea, in subsequent patches, is to
provide an alternative to these vfuncs for the Execlists submission
mechanism.
v2: Splitted into two and reordered to illustrate our intentions, instead
of showing it off. Also, remove the add_request vfunc and added the
stop_ring one.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet:
- Make checkpatch happy.
- Be grumpy about the excessive vtable.
- Ditch gt->is_ring_initialized.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The backing objects and ringbuffers for contexts created via open
fd are actually empty until the user starts sending execbuffers to
them. At that point, we allocate & populate them. We do this because,
at create time, we really don't know which engine is going to be used
with the context later on (and we don't want to waste memory on
objects that we might never use).
v2: As contexts created via ioctl can only be used with the render
ring, we have enough information to allocate & populate them right
away.
v3: Defer the creation always, even with ioctl-created contexts, as
requested by Daniel Vetter.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For the most part, logical ring context objects are similar to hardware
contexts in that the backing object is meant to be opaque. There are
some exceptions where we need to poke certain offsets of the object for
initialization, updating the tail pointer or updating the PDPs.
For our basic execlist implementation we'll only need our PPGTT PDs,
and ringbuffer addresses in order to set up the context. With previous
patches, we have both, so start prepping the context to be load.
Before running a context for the first time you must populate some
fields in the context object. These fields begin 1 PAGE + LRCA, ie. the
first page (in 0 based counting) of the context image. These same
fields will be read and written to as contexts are saved and restored
once the system is up and running.
Many of these fields are completely reused from previous global
registers: ringbuffer head/tail/control, context control matches some
previous MI_SET_CONTEXT flags, and page directories. There are other
fields which we don't touch which we may want in the future.
v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11)
for other engines.
v3: Several rebases and general changes to the code.
v4: Squash with "Extract LR context object populating"
Also, Damien's review comments:
- Set the Force Posted bit on the LRI header, as the BSpec suggest we do.
- Prevent warning when compiling a 32-bits kernel without HIGHMEM64.
- Add a clarifying comment to the context population code.
v5: Damien's review comments:
- The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted.
- Remove dead code.
v6: Add a note about the (presumed) differences between BDW and CHV state
contexts. Also, Brad's review comments:
- Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros.
- Be less magical about how we set the ring size in the context.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Any given ringbuffer is unequivocally tied to one context and one engine.
By setting the appropriate pointers to them, the ringbuffer struct holds
all the infromation you might need to submit a workload for processing,
Execlists style.
v2: Drop ring->ctx since that looks terribly ill-defined for legacy
ringbuffer submission.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v1)
Acked-by: Damien Lespiau <damien.lespiau@intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull slave-dma updates from Vinod Koul:
"Some notable changes are:
- new driver for AMBA AXI NBPF by Guennadi
- new driver for sun6i controller by Maxime
- pl330 drivers fixes from Lar's
- sh-dma updates and fixes from Laurent, Geert and Kuninori
- Documentation updates from Geert
- drivers fixes and updates spread over dw, edma, freescale, mpc512x
etc.."
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
dmaengine: sun6i: depends on RESET_CONTROLLER
dma: at_hdmac: fix invalid remaining bytes detection
dmaengine: nbpfaxi: don't build this driver where it cannot be used
dmaengine: nbpf_error_get_channel() can be static
dma: pl08x: Use correct specifier for size_t values
dmaengine: Remove the context argument to the prep_dma_cyclic operation
dmaengine: nbpfaxi: convert to tasklet
dmaengine: nbpfaxi: fix a theoretical race
dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
dmaengine: add device tree binding documentation for the nbpfaxi driver
dmaengine: edma: Do not register second device when booted with DT
dmaengine: edma: Do not change the error code returned from edma_alloc_slot
dmaengine: rcar-dmac: Add device tree bindings documentation
dmaengine: shdma: Allocate cyclic sg list dynamically
dmaengine: shdma: Make channel filter ignore unrelated devices
dmaengine: sh: Rework Kconfig and Makefile
dmaengine: sun6i: Fix memory leaks
dmaengine: sun6i: Free the interrupt before killing the tasklet
dmaengine: sun6i: Remove switch statement from buswidth convertion routine
dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
...
As we have said a couple of times by now, logical ring contexts have
their own ringbuffers: not only the backing pages, but the whole
management struct.
In a previous version of the series, this was achieved with two separate
patches:
drm/i915/bdw: Allocate ringbuffer backing objects for default global LRC
drm/i915/bdw: Allocate ringbuffer for user-created LRCs
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we have the ability to allocate our own context backing objects
and we have multiplexed one of them per engine inside the context structs,
we can finally allocate and free them correctly.
Regarding the context size, reading the register to calculate the sizes
can work, I think, however the docs are very clear about the actual
context sizes on GEN8, so just hardcode that and use it.
v2: Rebased on top of the Full PPGTT series. It is important to notice
that at this point we have one global default context per engine, all
of them using the aliasing PPGTT (as opposed to the single global
default context we have with legacy HW contexts).
v3:
- Go back to one single global default context, this time with multiple
backing objects inside.
- Use different context sizes for non-render engines, as suggested by
Damien (still hardcoded, since the information about the context size
registers in the BSpec is, well, *lacking*).
- Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien).
- Move default context backing object creation to intel_init_ring (so
that we don't waste memory in rings that might not get initialized).
v4:
- Reuse the HW legacy context init/fini.
- Create a separate free function.
- Rename the functions with an intel_ preffix.
v5: Several rebases to account for the changes in the previous patches.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull thermal updates from Zhang Rui:
"Specifics:
- adds full support for 2 types of Thermal Controllers produced by
STMicroelectronics. One is a more traditional memory mapped
variant, the other is controlled solely by system configuration
registers. From Lee Jones.
- add TMU (Thermal Management Unit) support for Exynos3250 Soc.
From Chanwoo Choi.
- add critical and passive trip point support for int3403 thermal
driver. From Srinivas Pandruvada.
- a couple of small fixes/cleanups from Javi Merino, and Geert
Uytterhoeven"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: document struct thermal_zone_device and thermal_governor
thermal: cpu_cooling: fix typo highjack -> hijack
thermal: rcar: Document SoC-specific bindings
thermal: samsung: Add TMU support for Exynos3250 SoC
thermal: exynos: fix ordering in exynos_tmu_remove()
thermal: allow building dove_thermal with mvebu
thermal: sti: Add support for ST's Memory Mapped based Thermal controller
thermal: sti: Add support for ST's System Config Register based Thermal controller
thermal: sti: Introduce ST Thermal core code
thermal: sti: Supply Device Tree documentation
Thermal: int3403: Add CRT and PSV trip
A context backing object only makes sense for a given engine (because
it holds state data specific to that engine).
In legacy ringbuffer sumission mode, the only MI_SET_CONTEXT we really
perform is for the render engine, so one backing object is all we nee.
With Execlists, however, we need backing objects for every engine, as
contexts become the only way to submit workloads to the GPU. To tackle
this problem, we multiplex the context struct to contain <no-of-engines>
objects.
Originally, I colored this code by instantiating one new context for
every engine I wanted to use, but this change suggested by Brad Volkin
makes it more elegant.
v2: Leave the old backing object pointer behind. Daniel Vetter suggested
using a union, but it makes more sense to keep rcs_state as a NULL
pointer behind, to make sure no one uses it incorrectly when Execlists
are enabled, similar to what he suggested for ring->buffer (Rusty's API
level 5).
v3: Use the name "state" instead of the too-generic "obj", so that it
mirrors the name choice for the legacy rcs_state.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For the moment this is just a placeholder, but it shows one of the
main differences between the good ol' HW contexts and the shiny
new Logical Ring Contexts: LR contexts allocate and free their
own backing objects. Another difference is that the allocation is
deferred (as the create function name suggests), but that does not
happen in this patch yet, because for the moment we are only dealing
with the default context.
Early in the series we had our own gen8_gem_context_init/fini
functions, but the truth is they now look almost the same as the
legacy hw context init/fini functions. We can always split them
later if this ceases to be the case.
Also, we do not fall back to legacy ringbuffers when logical ring
context initialization fails (not very likely to happen and, even
if it does, hw contexts would probably fail as well).
v2: Daniel says "explain, do not showcase".
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: s/BUG_ON/WARN_ON/.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Most interesting is that md devices (major == 9) with
minor numbers of 512 or more will no longer be created
simply by opening a block device file. They can only
be created by writing to
/sys/module/md_mod/parameters/new_array
The 'auto-create-on-open' semantic is cumbersome and we
need to start moving away from it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=v8Er
-----END PGP SIGNATURE-----
Merge tag 'md/3.17' of git://neil.brown.name/md
Pull md updates from Neil Brown:
"Most interesting is that md devices (major == 9) with minor numbers of
512 or more will no longer be created simply by opening a block device
file. They can only be created by writing to
/sys/module/md_mod/parameters/new_array
The 'auto-create-on-open' semantic is cumbersome and we need to start
moving away from it"
* tag 'md/3.17' of git://neil.brown.name/md:
md: don't allow bitmap file to be added to raid0/linear.
md/raid0: check for bitmap compatability when changing raid levels.
md: Recovery speed is wrong
md: disable probing for md devices 512 and over.
md/raid1,raid10: always abort recover on write error.
Depending upon one module option to be sanitized (through USES_PPGTT)
for the other is a bit too fragile for my taste. At least WARN about
this.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts".
These expanded contexts enable a number of new abilities, especially
"Execlists".
The macro is defined to off until we have things in place to hope to
work.
v2: Rename "advanced contexts" to the more correct "logical ring
contexts".
v3: Add a module parameter to enable execlists. Execlist are relatively
new, and so it'd be wise to be able to switch back to ring submission
to debug subtle problems that will inevitably arise.
v4: Add an intel_enable_execlists function.
v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some legacy HW context code assumptions don't make sense for this new
submission method, so we will place this stuff in a separate file.
Note for reviewers: I've carefully considered the best name for this file
and this was my best option (other possibilities were intel_lr_context.c
or intel_execlist.c). I am open to a certain bikeshedding on this matter,
anyway.
And some point in time, it would be a good idea to split intel_lrc.c/.h
even further, but for the moment just shove everything together.
v2: Change to intel_lrc.c
v3: Squash together with the header file addition
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is no need to restore and restart PCM streams in case ADSP didn't
reach reset and power off state during system suspend/resume cycle. In that
case stream is still active but paused and firmware doesn't allow allocating
a new stream before paused stream is freed.
ADSP remains active in case suspend sequence didn't go to suspend_late
stage. This can happen when either suspend sequence is aborted by a wakeup
or by letting only devices suspend by "echo devices >/sys/power/pm_test".
Currently stream restoring fails in these suspend cases. Fix this by adding
a flag that indicates is complete stream reinitialization needed or is it
enough to resume paused stream. Flag is set when we know that ADSP reached
suspend_late.
Initial fix to this issue came from Fang Yang. I modified it a little and
forward ported it to top of two other suspend/resume patches from me.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Cc: yang fang <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Remove sst_byt_pcm_dev_resume() and move waiting of firmware boot into
sst_byt_pcm_dev_resume_early(). Now suspend_late and resume_early phases are
in sync with each other so that we know that ADSP was put into reset and was
unpowered after suspend_late and is ready to resume IO after resume_early
during resume stage in sst_byt_pcm_trigger().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Merge DSP reset and cleanup sequence in sst_byt_pcm_dev_suspend_noirq()
into sst_byt_pcm_dev_suspend_late(). First their order was wrong by first
unloading firmware modules in suspend_late and then taking DSP into reset
in suspend_noirq. Second ACPI has put device into OFF state already during
suspend_late so trying to reset the DSP is a no-op at suspend_noirq stage.
Fix these by moving DSP reset and cleanup into
sst_byt_pcm_dev_suspend_late() before firmware unloading.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
As usual in both a crtc index and a struct drm_crtc * version.
The function assumes that no one drivers their display below 10Hz, and
it will complain if the vblank wait takes longer than that.
v2: Also check dev->max_vblank_counter since some drivers register a
fake get_vblank_counter function.
v3: Use drm_vblank_count instead of calling the low-level
->get_vblank_counter callback. That way we'll get the sw-cooked
counter for platforms without proper vblank support and so can ditch
the max_vblank_counter check again.
v4: Review from Michel Dänzer:
- Restore lost notes about v3:
- Spelling in kerneldoc.
- Inline wait_event condition.
- s/vblank_wait/wait_one_vblank/
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In general having this can't hurt, and the atomic helpers will need
it to be able to reset the state objects properly. The overall idea
is to reset in the order pixels flow, so planes -> crtcs ->
encoders -> connectors.
v2: Squash in fixup from Ville to correctly deference struct drm_plane
instead of drm_crtc when walking the plane list. Fixes an oops in
driver init and resume.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Even though we should not try to use 4+GiB GTTs on 32-bit systems, by
using a local variable we can future proof the code whilst making it
easier to read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Appease checkpatch a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Part of the pre-validation for an execbuffer call is that there is at
least one object in the execlist. As we bail if we fail to lookup any
object, we can be sure that after the eb_lookup_vma() there is at least
one object in the vma list and so we do not need to assert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have an implementation requirement that precludes the user from
requesting a ggtt entry when the device is operating in ppgtt mode. Move
the current check from inside the execbuffer object collation to the
prevalidation phase.
v2: Roll both invalid flags checks into one
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based upon a hunk from a patch from Chris Wilson, but augmented to:
- Process the batch in the full ppgtt vm so that self-relocations
match again with userspace's expectations..
- Add a comment why plain pin for the global gtt binding is safe at
that point.
v2: Drop local bind_vm variable (Chris).
v3: Explain why this works despite the lack of proper active tracking
for the ggtt batch vma.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adapt the macro so that we can pass either the struct drm_device or the
struct drm_i915_private pointers and get the answer we want. Over time,
my plan is to convert all users over to using drm_i915_private and so
trimming down the pointer dance. Having spent a few hours chasing that
goal and achieved over 8k of object code saving, it appears to be a
worthwhile target. This interim macro allows us to slowly convert over.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Drop the (struct drm_device *) cast per the m-l discussion.
Also explain the seemingly unecessary first cast.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
During ring initialisation, sometimes we observe, though not in
production hardware, that the idle flag is not set even though the ring
is empty. Double check before giving up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is so that we can make the drm_i915_private->info always the
preferred source for chipset type and feature queries.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit b7dd0e350e (x86/xen: safely map and unmap grant frames when
in atomic context) causes PVH guests to crash in
arch_gnttab_map_shared() when they attempted to map the pages for the
grant table.
This use of a PV-specific function during the PVH grant table setup is
non-obvious and not needed. The standard vmap() function does the
right thing.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Tested-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Cc: stable@vger.kernel.org
If the timer irqs are resumed during device resume it is possible in
certain circumstances for the resume to hang early on, before device
interrupts are resumed. For an Ubuntu 14.04 PVHVM guest this would
occur in ~0.5% of resume attempts.
It is not entirely clear what is occuring the point of the hang but I
think a task necessary for the resume calls schedule_timeout(),
waiting for a timer interrupt (which never arrives). This failure may
require specific tasks to be running on the other VCPUs to trigger
(processes are not frozen during a suspend/resume if PREEMPT is
disabled).
Add IRQF_EARLY_RESUME to the timer interrupts so they are resumed in
syscore_resume().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
This was introduced in commit e306e3be1c (Merge tag
'stable/for-linus-3.17-rc0-tag').
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
