mmc_host is a virtual device and it doesn't have any pm ops and so during
pm registration of device, no_pm_callback gets set as true. The
mmc_host device is not runtime enabled as it is a virtual device and
mmc_host is the parent device of mmc_card. As the mmc_host is runtime
disabled, mmc_card can runtime suspend/resume without depending on
state of mmc_host during normal operations. During system suspend, the
direct_complete flag of mmc_host device gets set as it has no pm_ops.
When mmc_card successfully suspends, it clears the direct_complete flag
of its parent (mmc_host).
But in certain cases during dpm_suspend, an async error can occur after
suspend work for mmc_card is scheduled and before it gets executed. In
that case, mmc_card suspend work will not clear the direct_complete flag
of mmc_host. When mmc_host suspend comes after that of mmc_card,
it too will skip all actions.
But by this time, the mmc_host device has been added to device_suspended
list. So during resume, mmc_host resume will do dpm resume of mmc_host.
In dpm_resume, all devices which has direct_complete flag set will be
runtime_enabled. This is because, in dpm_suspend, any device with
direct_complete flag will be runtime_disabled. Thus, mmc_host which has
direct_complete flag set, will get runtime enabled during dpm_resume.
This is a problem in pm framework with direct_complete flag
(runtime enabling a device in resume when it was not runtime disabled
in suspend path).
Now that mmc_host device is runtime enabled, to runtime resume the
mmc_card, the pm framework will try to runtime resume the mmc_host
device as well and will fail. This prevents mmc_card from runtime
resuming after a runtime_suspend.
Fix this by adding a dummy suspend_prepare() fn for mmc_host. This
prevents the direct_complete flag of mmc_host device from getting set.
Change-Id: Ib739399027958d17e418e0240684b0b517a02941
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
While assigning msa permission, number of memory region is passed
as an argument within platform private data. This number could
exceed the range of memory region buffer that preallocated. Hence
add size check before accessing region buffer.
Change-Id: I45f4efc7edaa636c861458dab74b1956767d2019
CRs-Fixed: 2101134
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
If userspace issues write with string of length 21 or more then
there is a chance that kernel will overread lbuf array.
This change makes sure that lbuf is NULL terminated.
Change-Id: I9ad6d5a607b2ff1f293512be9746ee554b076b10
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Fix prototypes of the stub version of these functions
when QCOM_BUS_SCALING is not enabled
sde_power_data_bus_parse
sde_power_data_bus_unregister
Change-Id: I049e9da3e32902e23fcd1faca1693f18686914a5
Signed-off-by: Camus Wong <camusw@codeaurora.org>
CEA-861-F specs defines new video modes to be used with
HDMI 2.0 EDIDs. The VIC range has been extended from 1-64 to
1-107.
Our existing CEA modedb contains only 64 modes (VIC=1 to VIC=64). Now
to be able to parse new CEA modes using the existing methods, we have
to complete the modedb (VIC=65 onwards).
This patch adds:
- Timings for existing CEA video modes (from VIC=65 till VIC=92)
- Newly added 4k modes (from VIC=93 to VIC=107).
The patch was originaly discussed and reviewed here:
https://patchwork.freedesktop.org/patch/135810/
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
V2: Rebase
V3: Rebase
V4: Added native bit handling as per CEA-861-F spec (Ville)
V5: Fix timings for VIC 77:1920x1080 and 104:3840x2160p (Ville)
Remove unnecessary paranthesis from function svd_to_vic (Ville)
Added r-b (Neil)
V6: Rebase
V7: Fix indentation for modes from VIC 80
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-3-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix up remaining formatting/indentation issues]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Change-Id: I66d8e721ecd18db64c09bac77749bcd12b7aa120
Git-commit: 8ec6e0755565192b328059b64f982adabbecda78
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[nbahrani@codeaurora.org: resolve merge conflicts by removing
dependency to the codes not available]
Signed-off-by: Navid Bahrani <nbahrani@codeaurora.org>
This patch adds drm flag bits for aspect ratio information
Currently drm flag bits don't have field for mode's picture
aspect ratio. This field will help the driver to pick mode with
right aspect ratio, and help in setting right VIC field in avi
infoframes.
V2: Addressed review comments from Sean
- Changed PAR-> PIC_AR
V3: Rebase
V3: Added r-b by Jose
Change-Id: I40cd7fc8393166b710a5f1faaea6e7dac59af65b
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-2-git-send-email-shashank.sharma@intel.com
Git-commit: 876f43c073d79ad3f14a4cebd1aea1f39fc4daf5
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[nbahrani@codeaurora.org: resolve merge conflicts by changing
the mask bits to 27:24 instead of 22:19]
Signed-off-by: Navid Bahrani <nbahrani@codeaurora.org>
Fix memory leak due to rpm request not freed during error conditions.
Change-Id: I440a58bf452e76c8886f7bcd8f89b24698a301e9
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
If resume fails, there is no way to handle it now.
Also there's no attempt to recover from it.
This leads to lot of warnings while issuing requests.
Check for resume errors & reset the stack on error as
an attempt to recover from it.
Change-Id: Ie4d6d2a34c2c7a8154696e93d85e50d60410e0c2
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
* refs/heads/tmp-8a53962
Linux 4.4.105
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
usb: host: fix incorrect updating of offset
USB: usbfs: Filter flags passed in from user space
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: Increase usbfs transfer limit
USB: core: Add type-specific length check of BOS descriptors
usb: ch9: Add size macro for SSP dev cap descriptor
usb: Add USB 3.1 Precision time measurement capability descriptor support
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
usb: hub: Cycle HUB power when initialization fails
Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"
net: fec: fix multicast filtering hardware setup
xen-netfront: Improve error handling during initialization
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
tcp: correct memory barrier usage in tcp_check_space()
dmaengine: pl330: fix double lock
tipc: fix cleanup at module unload
net: sctp: fix array overrun read on sctp_timer_tbl
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
NFSv4: Fix client recovery when server reboots multiple times
KVM: arm/arm64: Fix occasional warning from the timer work function
nfs: Don't take a reference on fl->fl_file for LOCK operation
ravb: Remove Rx overflow log messages
net/appletalk: Fix kernel memory disclosure
vti6: fix device register to report IFLA_INFO_KIND
ARM: OMAP1: DMA: Correct the number of logical channels
net: systemport: Pad packet before inserting TSB
net: systemport: Utilize skb_put_padto()
kprobes/x86: Disable preemption in ftrace-based jprobes
perf test attr: Fix ignored test case result
sysrq : fix Show Regs call trace on ARM
EDAC, sb_edac: Fix missing break in switch
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
spi: sh-msiof: Fix DMA transfer size check
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
selftests/x86/ldt_get: Add a few additional tests for limits
s390/pci: do not require AIS facility
ima: fix hash algorithm initialization
USB: serial: option: add Quectel BG96 id
s390/runtime instrumentation: simplify task exit handling
serial: 8250_pci: Add Amazon PCI serial device ID
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
bcache: recover data from backing when data is clean
bcache: only permit to recovery read error when cache device is clean
ANDROID: initramfs: call free_initrd() when skipping init
Conflicts:
drivers/usb/core/config.c
include/linux/usb.h
include/uapi/linux/usb/ch9.h
Change-Id: Ibada5100be12f3a1389461f7738ee2ecb0d427af
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=Kpwd
-----END PGP SIGNATURE-----
Merge 4.4.110 into android-4.4
Changes in 4.4.110
x86/boot: Add early cmdline parsing for options with arguments
KAISER: Kernel Address Isolation
kaiser: merged update
kaiser: do not set _PAGE_NX on pgd_none
kaiser: stack map PAGE_SIZE at THREAD_SIZE-PAGE_SIZE
kaiser: fix build and FIXME in alloc_ldt_struct()
kaiser: KAISER depends on SMP
kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER
kaiser: fix perf crashes
kaiser: ENOMEM if kaiser_pagetable_walk() NULL
kaiser: tidied up asm/kaiser.h somewhat
kaiser: tidied up kaiser_add/remove_mapping slightly
kaiser: kaiser_remove_mapping() move along the pgd
kaiser: cleanups while trying for gold link
kaiser: name that 0x1000 KAISER_SHADOW_PGD_OFFSET
kaiser: delete KAISER_REAL_SWITCH option
kaiser: vmstat show NR_KAISERTABLE as nr_overhead
kaiser: enhanced by kernel and user PCIDs
kaiser: load_new_mm_cr3() let SWITCH_USER_CR3 flush user
kaiser: PCID 0 for kernel and 128 for user
kaiser: x86_cr3_pcid_noflush and x86_cr3_pcid_user
kaiser: paranoid_entry pass cr3 need to paranoid_exit
kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls
kaiser: fix unlikely error in alloc_ldt_struct()
kaiser: add "nokaiser" boot option, using ALTERNATIVE
x86/kaiser: Rename and simplify X86_FEATURE_KAISER handling
x86/kaiser: Check boottime cmdline params
kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush
kaiser: drop is_atomic arg to kaiser_pagetable_walk()
kaiser: asm/tlbflush.h handle noPGE at lower level
kaiser: kaiser_flush_tlb_on_return_to_user() check PCID
x86/paravirt: Dont patch flush_tlb_single
x86/kaiser: Reenable PARAVIRT
kaiser: disabled on Xen PV
x86/kaiser: Move feature detection up
KPTI: Rename to PAGE_TABLE_ISOLATION
KPTI: Report when enabled
x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
x86/kasan: Clear kasan_zero_page after TLB flush
kaiser: Set _PAGE_NX only if supported
Linux 4.4.110
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 69e0210fd01ff157d332102219aaf5c26ca8069b upstream.
Currently we clear kasan_zero_page before __flush_tlb_all(). This
works with current implementation of native_flush_tlb[_global]()
because it doesn't cause do any writes to kasan shadow memory.
But any subtle change made in native_flush_tlb*() could break this.
Also current code seems doesn't work for paravirt guests (lguest).
Only after the TLB flush we can be sure that kasan_zero_page is not
used as early shadow anymore (instrumented code will not write to it).
So it should cleared it only after the TLB flush.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1452516679-32040-2-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b078f5de7fc0851af4102493c7b5bb07e49c4cb upstream.
The pvclock vdso code was too abstracted to understand easily
and excessively paranoid. Simplify it for a huge speedup.
This opens the door for additional simplifications, as the vdso
no longer accesses the pvti for any vcpu other than vcpu 0.
Before, vclock_gettime using kvm-clock took about 45ns on my
machine. With this change, it takes 29ns, which is almost as
fast as the pure TSC implementation.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/6b51dcc41f1b101f963945c5ec7093d72bdac429.1449702533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaiser cannot be used on paravirtualized MMUs (namely reading and writing CR3).
This does not work with KAISER as the CR3 switch from and to user space PGD
would require to map the whole XEN_PV machinery into both.
More importantly, enabling KAISER on Xen PV doesn't make too much sense, as PV
guests use distinct %cr3 values for kernel and user already.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the required bits have been addressed, reenable
PARAVIRT.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let kaiser_flush_tlb_on_return_to_user() do the X86_FEATURE_PCID
check, instead of each caller doing it inline first: nobody needs
to optimize for the noPCID case, it's clearer this way, and better
suits later changes. Replace those no-op X86_CR3_PCID_KERN_FLUSH lines
by a BUILD_BUG_ON() in load_new_mm_cr3(), in case something changes.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found asm/tlbflush.h too twisty, and think it safer not to avoid
__native_flush_tlb_global_irq_disabled() in the kaiser_enabled case,
but instead let it handle kaiser_enabled along with cr3: it can just
use __native_flush_tlb() for that, no harm in re-disabling preemption.
(This is not the same change as Kirill and Dave have suggested for
upstream, flipping PGE in cr4: that's neat, but needs a cpu_has_pge
check; cr3 is enough for kaiser, and thought to be cheaper than cr4.)
Also delete the X86_FEATURE_INVPCID invpcid_flush_all_nonglobals()
preference from __native_flush_tlb(): unlike the invpcid_flush_all()
preference in __native_flush_tlb_global(), it's not seen in upstream
4.14, and was recently reported to be surprisingly slow.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I have not observed a might_sleep() warning from setup_fixmap_gdt()'s
use of kaiser_add_mapping() in our tree (why not?), but like upstream
we have not provided a way for that to pass is_atomic true down to
kaiser_pagetable_walk(), and at startup it's far from a likely source
of trouble: so just delete the walk's is_atomic arg and might_sleep().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we're playing the ALTERNATIVE game, use that more efficient
method: instead of user-mapping an extra page, and reading an extra
cacheline each time for x86_cr3_pcid_noflush.
Neel has found that __stringify(bts $X86_CR3_PCID_NOFLUSH_BIT, %rax)
is a working substitute for the "bts $63, %rax" in these ALTERNATIVEs;
but the one line with $63 in looks clearer, so let's stick with that.
Worried about what happens with an ALTERNATIVE between the jump and
jump label in another ALTERNATIVE? I was, but have checked the
combinations in SWITCH_KERNEL_CR3_NO_STACK at entry_SYSCALL_64,
and it does a good job.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD (and possibly other vendors) are not affected by the leak
KAISER is protecting against.
Keep the "nopti" for traditional reasons and add pti=<on|off|auto>
like upstream.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Concentrate it in arch/x86/mm/kaiser.c and use the upstream string "nopti".
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added "nokaiser" boot option: an early param like "noinvpcid".
Most places now check int kaiser_enabled (#defined 0 when not
CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S
and entry_64_compat.S are using the ALTERNATIVE technique, which
patches in the preferred instructions at runtime. That technique
is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated.
Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that,
but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when
nokaiser like when !CONFIG_KAISER, but not setting either when kaiser -
neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL
won't get set in some obscure corner, or something add PGE into CR4.
By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled,
all page table setup which uses pte_pfn() masks it out of the ptes.
It's slightly shameful that the same declaration versus definition of
kaiser_enabled appears in not one, not two, but in three header files
(asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h). I felt safer that way,
than with #including any of those in any of the others; and did not
feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes
them all, so we shall hear about it if they get out of synch.
Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER
from kaiser.c; removed the unused native_get_normal_pgd(); removed
the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some
comments. But more interestingly, set CR4.PSE in secondary_startup_64:
the manual is clear that it does not matter whether it's 0 or 1 when
4-level-pts are enabled, but I was distracted to find cr4 different on
BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An error from kaiser_add_mapping() here is not at all likely, but
Eric Biggers rightly points out that __free_ldt_struct() relies on
new_ldt->size being initialized: move that up.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
