If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call. Else it will cause
unbalanced pm_runtime_enable() call in the succeding probe call.
This anomaly was observed when the call to devm_phy_create() failed
with -EPROBE_DEFER.
Balance out the pm_runtime_enable() call in .remove() as well.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent resources from being freed twice in case device_add() call
fails within phy_create(). Also use ida_simple_remove() instead of
ida_remove() as we had used ida_simple_get() to allocate the ida.
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow phy-exynos-usb2 to be autoloaded based on devicetree information.
Tested on Odroid X2 with its USB subsystem build as modules.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure.
A simplified version of the semantic match that finds this problem is as
follows:
// <smpl>
@@
expression e,e1;
statement S;
@@
*e = devm_ioremap_resource(...);
if (!e1) S
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver depend on the reset framework in a mandatory way. Make sure
reset_control_get is defined by adding this dependency in Kconfig
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simply document new compat strings.
There appears to be no need for a driver updates.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix breakage introduced by
commit c557d392fb,
'serial: Test for no tx data on tx restart'.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue was discovered with static analysis and has two instances in
this file. The code looks like this
if (x < 65536000) {
...
} else if (x < 655360000) {
...
} else if (x <= 0xffffffff /* 6553600000 */) {
...
} else if (x <= 0xffffffff /* 65536000000 */) {
...
}
The meaning of this block is to select appropriate clock frequency for
interval timer basing on "x", which is amount of time.
Notes:
1. That last condition matches previous one - that's the issue.
2. Decimal numbers in comments don't match hex numbers in expressions.
But in first case the numbers have same order, while in the second case
the hex number is the same, and the decimal one is 10 times bigger.
3. Actually type of "x" is "unsigned int", so its exact upper limit is
not obviously known.
4. There's no "else" block.
So it makes sense to make an "else" block from last "else if" case. The
code inside the block seems correct for such usage.
[ Actually, get rid of the final "else if" case and change the
next-to-last "else if" case to an "else" as the upper limit of "x" _is_
known to be 0xffffffff (UINT_MAX), which is less than 6553600000 -- Ian ]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79871
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s->maxdata for the do subdevice should be 1, however currently it is
being set to 0xffffffff. Fix this.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to test whether devpriv is null in this function. The
check looks left over and we can just remove it.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This value is only needed for subdevices that support async commands.
The comedi core will default the value to 1 when it is not initialized.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
patch 'vnt_set_keymode don't save pairwise key entry' caused
a slight regression in access point mode
Only don't save in station mode.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default is that all the channels are enabled for rf types
not mentioned here.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetedelay() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_set_modem_info() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigeta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digiseta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "bd" which are used in dgap_tty_digiseta().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_param() has a paramter which is tty_struct and
use variables in that struct. That variables which are "ch", "bd", "bs"
and "un" do not need to check NULL so these statements are removed.
And also change the parameter of this function because
it is possible to let someone know what paramters
are needed for this function.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ts" is not used in dgap_param().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ch" is already checking in caller.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
all functions are in visibility order.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop data and the function always returns little endian
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an allocation in init_usb() failed, it returns without
deallocation of already allocated resources.
The patch fix it and replaces GFP_ATOMIC by GFP_KERNEL in
alloc_tx_sdu_struct() and alloc_rx_struct() as long as
they are called from probe only.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warnings "Missing a blank line after declarations" in file
usb1401.c
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning "else is not generally useful after a break or return" in
file ced_ioc.c, function ced_wait_event()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning "else is not generally useful after a break or return" in
file ced_ioc.c, function ced_set_event()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning "please, no space before tabs" in file
ced_ioc.c
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warnings "Missing a blank line after declarations" in file
ced_ioc.c
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
