Right now, sctp transports are not fully initialized and when
adding any new fields, they have to be explicitely initialized.
This is prone to mistakes. So we switch to calling kzalloc()
which makes things much simpler.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
We don't need to force the T3 timer any more and it's
actually wrong to do as it causes too long of a delay.
The timer will be started if one is not running, but if
one is running, we leave it alone.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
The 'resent' bit is used to make sure that we don't update
rto estimate based on retransmitted chunks. However, we already
have the 'rto_pending' bit that we test when need to update rto,
so 'resent' bit is just extra. Additionally, we currently have
a bug in that we always set a 'resent' bit and thus rto estimate
is only updated by Heartbeats.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
commit 4951feda0c60d1ef681f1a270afdd617924ab041
sctp: Do no select unconfirmed transports for retransmissions
added code to make sure that we do not select unconfirmed paths
for data transmission. This caused a problem when there are only
2 paths, 1 unconfirmed and 1 unreachable. In that case, the next
retransmit path returned is NULL and that causes a kernel crash.
The solution is to only change retransmit paths if we found one to use.
Reported-by: Frank Schuster <frank.schuster01@web.de>
Signed-off-b: Vlad Yasevich <vladislav.yasevich@hp.com>
This assignment isn't needed because we did it earlier already.
Also another reason to delete the assignment is because it triggers a
Smatch warning about checking for NULL pointers after a dereference.
Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
This patch implement sctp association probing module, the module
will be called sctp_probe.
This module allows for capturing the changes to SCTP association
state in response to incoming packets. It is used for debugging
SCTP congestion control algorithms.
Usage:
$ modprobe sctp_probe [full=n] [port=n] [bufsize=n]
$ cat /proc/net/sctpprobe
The output format is:
TIME ASSOC LPORT RPORT MTU RWND UNACK <REMOTE-ADDR STATE CWND SSTHRESH INFLIGHT PARTIAL_BYTES_ACKED MTU> ...
The output will be like this:
9.226086 c4064c48 9000 8000 1500 53352 1 *192.168.0.19 1 4380 54784 1252 0 1500
9.287195 c4064c48 9000 8000 1500 45144 5 *192.168.0.19 1 5880 54784 6500 0 1500
9.289130 c4064c48 9000 8000 1500 42724 5 *192.168.0.19 1 7380 54784 6500 0 1500
9.620332 c4064c48 9000 8000 1500 48284 4 *192.168.0.19 1 8880 54784 5200 0 1500
......
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
sctp_chunk_is_data macro is defined to decide that
whether a chunk is data chunk or not.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
An unconfirmed transport is one that we have not been
able to reach since the beginning. There is no point in
trying to retrasnmit data on those transports. Also, the
specification forbids it due to security issues.
Reported-by: Frank Schuster <frank.schuster01@web.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
While doing retranmit, if control chunk exists, such as
FORWARD TSN chunk, and the DATA chunk can not be bundled with
this control chunk because of PMTU limit, no DATA chunk
will be retranmitted in the current implementation. This
patch makes sure to retranmit at least one DATA chunk in this case.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
The following patch removes the default from the Kconfig entry for sierra_net
driver as recommended.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Rory Filer <rfiler@sierrawireless.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While lookup the output route, we do not set the src and dest
port. This will cause we got a wrong route if we had set the
outbund transport to IPsec with src or dst port.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
In current implementation if ABORT chunk is received with T flag is set
and zero verification tag in COOKIE-WAIT state, the ABORT chunk will be
always accepted. This is because in COOKIE-WAIT state, the endpoint does
not know the peer's verification tag, and it's zero in the endpoint.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
PR-SCTP extension section 3.5 Sender Side Implementation of PR-SCTP:
C5) If a FORWARD TSN is sent, the sender MUST assure that at
least one T3-rtx timer is running.
So this patch fix to assure at least one T3-rtx timer is running
if a FORWARD TSN is or will to sent.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
SHUTDOWN-ACK is alaways sent to the primary path at the first time,
but should better transmit SHUTDOWN-ACK chunk to the same destination
transport address from which it received the SHUTDOWN chunk.
Based on the work from Wei Yongjun <yjwei@cn.fujitsu.com>.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
The function should use the address family of the address when
trying to determine the length of the structure.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
We dereference "sk" unconditionally elsewhere in the function.
This was left over from: b30bd282 "ip6_xmit: remove unnecessary NULL
ptr check". According to that commit message, "the sk argument to
ip6_xmit is never NULL nowadays since the skb->priority assigment
expects a valid socket."
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
potential uninitialized variable num_xfrms
fix compiler warning: 'num_xfrms' may be used uninitialized in this function.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/xfrm/xfrm_policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
sock_recv_ts_and_drops() is fat and slow (~ 4% of cpu time on some
profiles)
We can test all socket flags at once to make fast path fast again.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes vid/pid for Ericsson MBM devices from the whitelist set of
devices. The MBM devices are instead identified by GUID.
In order for cdc_ether to handle these devices the GUID in the MDLM descriptor
is tested. All MBM devices currently handled by cdc_ether as well as future
CDC Ethernet MBM devices can be identified by the GUID.
This is the same solution used in Carl Nordbeck's mbm driver,
http://kerneltrap.org/mailarchive/linux-usb/2008/11/17/4141384/thread
I post this as RFC to get feedback on however cdc_ether is the correct place to
do the binding, or if it should be done in a separate driver, e.g. zaurus.
Signed-off-by: Jonas Sjöquist <jonas.sjoquist@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case a reset is performed, rtl8169_rx_interrupt() is called from
process context instead of softirq context. Special care must be taken
to call appropriate network core services (netif_rx() instead of
netif_receive_skb()). VLAN handling also corrected.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Diagnosed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following does the same thing without the extra overhead
of testing all the registers. It also handles the out of memory
case.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greenfield is a 11n feature, remove it from non-11n devices
configuration parameters list
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Separate the hw_set_hw_params() function to per device based; different
devices can have different hardware parameters set, when separate the
function based on device type can avoid mistakes, give more flexibilities and
easier to read.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
The TX status code is currently abusing the ampdu_ack_map field (a bitmap) to
count the number of successfully received frames. The comments in mac80211.h
show there are actually three different, relevant variables, of which we are
currently using two, both incorrectly. Fix this by making
- ampdu_ack_len -> the number of ACKed frames (i.e. successes)
- ampdu_ack_map -> the bitmap
- ampdu_len -> the total number of frames sent (i.e., attempts)
to match the header file (and verified with ath9k's usage) and updating Intel's
RS code to match.
Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Add general, rx and tx uCode statistics to 3945. This will help
in debugging
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
When starting an aggregation session, the swq_id is generated in function
iwl_virtual_agg_queue_num() where the first parameter is supposed to be
the Access Class, but it used the tx fifo ID instead. This means the AC
value stored in swq_id is incorrect. To test this, look at the tx_queue
file in debugfs while transmitting Best Effort flow (ac=2), it shows:
hwq 10: read=0 write=0 stop=0 swq_id=0xa9 (ac 1/hwq 10)
After this fix, it will show:
hwq 10: read=0 write=0 stop=0 swq_id=0xaa (ac 2/hwq 10)
Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
We removed resetting of PCI_RETRY_TIMEOUT register
in merge of suspend resume work.
'Suspend and resume' resets the PCI configuration space, so we
have to disable the RETRY_TIMEOUT register again here.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
IEEE80211_CONF_SHORT_SLOT_TIME is no longer a possible setting in
ieee80211_conf->flags
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
The low level transmission function is performed at uCode layer
for all the "agn" NICs, there is no statistics information available
for mac80211 get_stats() call. Remove the callback function to
avoid misleading information that returned success when indeed it is not
supported. Now return "not supported".
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Patch "iwlwifi: work around passive scan issue" was merged into
wireless-2.6, but touched a lot of code since modified (and moved)
in wireless-next-2.6. This caused some conflicts.
Conflicts:
drivers/net/wireless/iwlwifi/iwl-scan.c
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Some firmware versions don't behave properly when
passive scanning is requested on radar channels
without enabling active scanning on receiving a
good frame. Work around that issue by asking the
firmware to only enable the active scanning after
receiving a huge number of good frames, a number
that can never be reached during our dwell time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Upstream PV guests fail to boot because of a NULL pointer in
irq_force_complete_move(). It is possible that xen guests have
irq_desc->chip_data = NULL.
Test for NULL chip_data pointer before attempting to complete an irq move.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
LKML-Reference: <20100427152434.16193.49104.sendpatchset@prarit.bos.redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org> [2.6.33]
when we fall back to buffered write from direct write, we call
__generic_file_aio_write() but that will end up doing direct write
even we are only prepared to do buffered write because the file
has the O_DIRECT flag set. This is a fix for
https://bugzilla.novell.com/show_bug.cgi?id=591039
revised with Joel's comments.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits)
MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump
MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.
MIPS: Loongson 2F: Enable fixups of the latest binutils
MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS
MIPS: Kconfig: Make Broadcom SoC support naming consistent
MIPS: BCM63xx: Update defconfig
MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m
STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware.
NET: mdio-octeon: Enable the hardware before using it.
I2C: Fix section mismatch errors in i2c-octeon.c
MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.
MIPS: Loongson: Fix phys_mem_access_prot() check
MIPS: Loongson: Fix find_vga_mem_init()
MIPS: Loongson: Fix typo in gdium mach type string.
MIPS: Use CKSEG1ADDR for uncached handler
MIPS: Check for accesses beyond the end of the PGD.
MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c
MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.
MIPS: die() does not call die notifier chain
MIPS: Swarm, Littlesur: Enable PATA platform driver.
...
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed
the out-of-order issue of Loongson-2F described in chapter 15 of the
Loongson2F User Manual [1, 2], but introduced some problems.
The option changes all of the jump target to "addr & 0xcfffffff" through the
at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is
wrong. Avoids the problem via telling the assembler to not use the $at
register.
[1] Loongson2F User Manual (Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[2] English Version of Chapter 15:
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Reported-and-tested-by: Liu Shiwei <liushiwei@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1109/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With the "Fixups of Loongson2F" patch [1] having been applied to binutils
for binutils 2.20.1 we now can use it's time to enable the options provided
by the patch to compile the kernel.
Without these fixups, the system may hang if the erratum is triggered.
For more information on these fixups please refer to the following
references.
[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[3] Chapter 15 of the English version Loongson 2F User Manual
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1106/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As documented in the Loongson 2F User Manual [2, 3], the old Loongson2F
series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds
in the kernel and binutils. This issue has been rectified in Loongson 2F
series 2F03 so no workarounds needed.
Now that the workarounds [1] adding the the -mfix-loongson2f-nop and
-mfix-loongson2f-jump options have been comitted to the binutils the CVS
repository), we can add the workarounds in the kernel.
The workarounds have no significant side effect on the system but may
decrease performance so we control them through a a new
CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable
it as necessary.
[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[3] English Version of the above chapter 15
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1105/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
the defconfig was out-of-sync since 2.6.30-rc6, update it with the new
symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support.
Signed-off-by: Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1081/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the oprofile is compiled as a module do_IRQ() is not called in
arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In some cases the mdio bus is not enabled at the time of probing.
This prevents anything from working, so we will enable it before
trying to use it, and disable it when the driver is removed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/1090/
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap
register address should contain the destination parameters not the
source one. This has not been noticed because the code is only using
source = destination.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The check used to determine if uncached accelerated should be used or not
is wrong. The parenthesis are misplaced and making the test fail.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1161/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
