Change the downmix/pan_scale control data type from integer to bytes
to make it compatible across different archs.
Change-Id: I9282673dc1e124185d7c545206bba31966b803dc
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
MBA image size comparison check is currently being
done with a signed count whose value can possibly be
negative. If count value is negative then comparison
will always succeed and invoke memcpy with incorrect
value of count leading to buffer overflow. Fix this
by not using signed comparison.
Change-Id: Id2d0cafae01f940f36cfd559d4656fc0f022d6a5
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
Block device should be available before mounting of root
device. In some cases block device is not available at the
time of root device mounting because mmc detect work is not
completed by that time which is causing mount failure. This
change flush mmc detect work asynchronously after device probe
and before mounting of root device, async_synchronize_full
will make sure all asynchronous function calls have been done.
Change-Id: I22be6c4b528c952fd73ea5d5e8ba533ce7165f86
Signed-off-by: Ankit Jain <jankit@codeaurora.org>
Pop sound happens after start playback on HPH when
ultrasound playback on LO4 is enabled.
This is because CnP is sequence dependent and enabling
design blocks in specified order is causing minimum CnP.
CRs-Fixed: 2100346
Change-Id: If10f9013cc1a2aa61fe9c719d3190f2df0b00950
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
During firmware load, there could be data over reads
due to calculation of lm_size and lm_sequence from
block and block_size. Added bounds checking to prevent
this and improved the size calculation.
CRs-Fixed: 2107981
Change-Id: Ib4283951b0d6c8fb699af1f85e657981ad4c0318
Signed-off-by: Archana Sriram <apsrir@codeaurora.org>
This change adds device tree flag to allow system suspend
on automotive platform with USB devices connected that do
not support runtime suspend.
Change-Id: I3ddda5052c866e16c46e5a46255acc28ab6f9363
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Kernel crash is observed when trying to access component
because wcd_dsp_ctl is deregistered. This is due to failure in
soundcard registration. The failure occurs due to msm
unable to set aanc version. Update afe clock version for
primary auxpcm resolves the issue.
CRs-Fixed: 2113187
Change-Id: I8bb3c9a6946f1c1af88a62d7ee154b6e7ff904f4
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
DWC3 driver uses wakeup_source and allows pm_suspend only after
entering low power mode as part of runtime suspend. This prevents
PM suspend in host mode if connected device's driver doesn't
support runtime or selective suspend.
Add support in driver where user can specify using dtsi attribute
to not use wakeup source in host mode. It will allow system to enter
deep sleep or pm_suspend irrespective of runtime PM state of XHCI.
On high level below are the changes in default behavior:
-Do not use wakeup_source for DWC3 when operating in host mode.
-For host mode, devices will suspend upon PM suspend and resumed
after PM resume.
Change-Id: Ia1d450e6dd99e094e48caf9723a355b7870b54dd
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Block device should be available before mounting of
root device. In some cases block device is not available
at the time of root device mounting because mmc detect
work is not completed by that time which is causing mount
failure. To fix this, flush mmc detect work after device
probe completion.
Change-Id: I785a1e01a691652cfdb5a82acee2475e23fe3766
Signed-off-by: Ankit Jain <jankit@codeaurora.org>
Fix uninitialized variable use which would cause unexpected return
value.
CRs-Fixed: 2070945
Change-Id: I874ec28904149061246fb4c2b24444a4c33e0116
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
The max speed for the USB device is high speed. So
the device is always enumerated in high speed indpendent
of the connection. Fix this by setting the EXTCON_USB_SPEED
to 1 which in turn sets the max speed as super speed.
CRs-Fixed: 2108100
Change-Id: I8f313cc3ee015a1340ab78650e17334ca85ddd27
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
If the device is booted up with OTG cable connected,
the device does not switch to host mode. The trigger
is lost because the irqs are enabled at a later time.
Fix this by checking the ID state during probe.
CRs-Fixed: 2106351
Change-Id: I742d0839832219e757348e102252f97d95a8335b
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
During p2p find unwanted probe requests with broadcast SSID is
sent along with the probe requests with p2p wildcard SSID.
The addition of survey report flag in scan flags initiates an
active scan along with the p2p scan, due to which we see probe
requests with broadcast SSID along with the probe requests having
p2p wildcard SSID.
Fix the flags sent during scan command for p2p scan.
CRs-Fixed: 2093805
Change-Id: I7c2a1502ef86bc5151e8c86f4a89f073e75a925d
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
p2p_listen not working due to inncorrect scan flags
passed to firmware.
Disable the fitlering out of probe request flag in
scan flag during remain on channel in p2p listen.
CRs-Fixed: 2095628
Change-Id: Ie39222c487160ba4001771fc8e1c6f6f161dfb65
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Expose a HDCP_VERSION property for the connector.
This property is used by the userspace to decide the
proper handling of secure streams based on HDCP version
of the sink.
This also guarantees that sinks do not receive
secure content higher than their capability.
Change-Id: Ia4ada2f26a5cde088b24c8792c10c9f9097602b1
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Currently the code ends up holding a wakelock even while discharging.
There is no need to hold wakelock or handle stepcharging/jeita
situations while discharging.
Change-Id: I0edfd16cef88ec45b0f0ebb80533b62c6e775116
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
make change to check return value of __qseecom_process_reentrancy,
and modify error processing.
Change-Id: I6a37de79f6c6b4245b9654ea9724b51e62b8e7a2
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Fix the handling of HDCP repeaters to mark part II
of the authentication as failure if they do not have
any devices connected to them.
Change-Id: I6b21ed2ce9a280f7e200404b05d111508a6d3dd8
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Exception event can be raised by the device when system
suspend is in progress. This will result in unclocked
register access in exception event handler as clocks will
be turned off during suspend. This change makes sure to flush
exception event handler work in suspend before disabling
clocks to avoid unclocked register access issue.
Change-Id: I5a089a0387790a12f4cc3213c75e9677467a2a07
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
After the crashdumper runs once, and the user sets the
snapshot_crashdumper sysfs node to 0, it is possible that stale data
is saved off into the snapshot. Check the value of the sysfs node at
the appropriate place to force a re-read of the data through the
legacy path.
Change-Id: Icf27c39b68d786003c33fd0eb22bd3e8b9a036be
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
Secure display entry/exit should be accompanied
by null commit in video mode to make sure there is
no non secure access.
Change-Id: I7928a2465de9c46f69e963977931f7a6618f01fb
Signed-off-by: Animesh Kishore <animeshk@codeaurora.org>
