msm_gpu's get_timestamp() op (called by the MSM_GET_PARAM ioctl) can
result in register accesses. We need our power domain and clocks to
be active for that. Make sure they are enabled here.
Change-Id: I1b8e59e0246ed7d9b8a0b6ae660ebfbb15b08782
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
We need to use pm-runtime properly when IOMMU is using device_link() to
control it's own clocks.
Change-Id: I7c5668e6a0fcfc2d4664355e49c49d4dcb26323e
Signed-off-by: Rob Clark <robdclark@gmail.com>
Git-commit: eeb754746b140c5f55e6b25706a9142aa549b348
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[ssusheel@codeaurora.org: fix some merge conflicts]
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Add a node for a GPIO-based FAN cooling device for msm8996
CV2X boards. This GPIO has a single speed and can be controlled
from user space.
Change-Id: Iee427407f3c4032e1394c61dd1f225e24a091a99
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable the GPIO FAN driver to enable control of GPIO based
fans for cooling on msm8996-auto devices.
Change-Id: I5494fae1c7ab75362bc6c71c4e731f0581b01995
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Reduce the frequency of kgsl logging when kgsl driver failed to get
memory mapping for requested memory.
Change-Id: If1a8832a9aa0396e3c990916deec7949697be12d
Signed-off-by: Venkateswara Rao Tadikonda <vtadik@codeaurora.org>
Sparse bind object are unbinded with bind id. This
can be exploited by any malicious application calling
unbind with same bind id again and again.
This can lead to a race condition between two threads
where one free the bind object and second thread uses
same object leading to bad dereference.
Change-Id: I542a008fc647489560667fb5016453a0c3448f7a
Signed-off-by: Sunil Khatri <sunilkh@codeaurora.org>
The stacktraces always begin as follows:
[<c00117b4>] save_stack_trace_tsk+0x0/0x98
[<c0011870>] save_stack_trace+0x24/0x28
...
This is because the stack trace code includes the stack frames for itself.
This is incorrect behaviour, and also leads to "skip" doing the wrong
thing (which is the number of stack frames to avoid recording.)
Perversely, it does the right thing when passed a non-current thread. Fix
this by ensuring that we have a known constant number of frames above the
main stack trace function, and always skip these.
This was fixed for arch arm by 3683f44c42 ("ARM: stacktrace: avoid
listing stacktrace functions in stacktrace")
Change-Id: I1a65ee011f022227204b406bb0288828a7beb0b8
Link: http://lkml.kernel.org/r/1504078343-28754-1-git-send-email-guptap@codeaurora.org
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Git-commit: 457b9ab50babff7100fe7902d195069561bc1db7
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
[guptap@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
The page_owner stacktrace always begin as follows:
[<ffffff987bfd48f4>] save_stack+0x40/0xc8
[<ffffff987bfd4da8>] __set_page_owner+0x3c/0x6c
These two entries do not provide any useful information and limits the
available stacktrace depth. The page_owner stacktrace was skipping caller
function from stack entries but this was missed with commit f2ca0b557107
("mm/page_owner: use stackdepot to store stacktrace")
Example page_owner entry after the patch:
Page allocated via order 0, mask 0x8(ffffff80085fb714)
PFN 654411 type Movable Block 639 type CMA Flags 0x0(ffffffbe5c7f12c0)
[<ffffff9b64989c14>] post_alloc_hook+0x70/0x80
...
[<ffffff9b651216e8>] msm_comm_try_state+0x5f8/0x14f4
[<ffffff9b6512486c>] msm_vidc_open+0x5e4/0x7d0
[<ffffff9b65113674>] msm_v4l2_open+0xa8/0x224
Change-Id: Ia34fc127d691c2858d991bb631aad9ebc703bcee
Link: http://lkml.kernel.org/r/1504078343-28754-2-git-send-email-guptap@codeaurora.org
Fixes: f2ca0b557107 ("mm/page_owner: use stackdepot to store stacktrace")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Git-commit: 665bb76dd71bc061c5f730226dc1881d151983c8
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
SDHCI_QUIRK2_USE_PIO_FOR_EMMC_TUNING quirk is defined with a bit position
of 23 (1 << 23). Since this bit position is already defined for some other
quirk, update its bit position to next available one.
Change-Id: I878b3c0b3f4cb32ecaf27fc77ccdfb7d4215a39c
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Supported rates and extended supported rates are added in probe
request automatically by firmware. The IE sent by host in the scan
request command is appended to this. If host also sends supported
and extended supported rates IE, then these IEs are duplicated in
the probe requests.
Skip sending the supported rates and extended supported rates IEs
in the start scan command for wcn3990.
CRs-Fixed: 2093804
Change-Id: I9afe85a3602a3935557894ed8c6e1af8cb47967d
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Provide support to cache CNE event for debugging purpose.
Change-Id: I00d101d3b9a627d7aba3e4524ff301797ea6085e
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Change the OTG regulator ops to static for smb1351 and smb135x
charger drivers.
Change-Id: Ide0c6461275f3ba74e0420e1d1a36c1e1f2bd18d
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
In certain conditions, after the battery SOC reaches 100%, SOC is
not getting updated during discharging. Based on the hardware
recommendation, adjust the Ki coefficient for full SOC so that
SOC can be updated faster during discharging.
While at it, remove prev_charge_status variable which is not
used really.
CRs-Fixed: 2089555
Change-Id: I54b7d86529c21c016ab777053895ccda9c7a2b35
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, FULL_SOC and MONOTONIC_SOC registers are updated
multiple times when the recharge SOC threshold is close enough to
trigger the recharging frequently. This was leading to a SOC
fluctuation when SOC masking algorithm is enabled.
Rearrange charge_full_update used in SOC masking algorithm such
that FULL_SOC and MONOTONIC_SOC registers are updated just once
when the charge_full flag is cleared.
Also, when the device is rebooted/shutdown and if charge_full
flag is set, write to FULL_SOC with battery_soc and a full value
to MONOTONIC_SOC registers. This helps to maintain the same SOC
across a device reboot.
Change-Id: I95afa90f27e4c0f948f301ff8d6a1f84ae422ef0
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add a device tree node for the SPI CAN controller to enable
a CAN network interface for msm8996 CV2X boards.
Change-Id: Ib9c1d63bf86e3b823aa8d762065ed374bdfeaa0e
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable configuration for K61 CAN over SPI driver.
Change-Id: I801629ac04303582530bed354282960db8f9c9ab
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add new parameters to account for different MCUs that can
be used with this driver. These devices have different reset
sequences and number of bits per word supported via SPI. Add
bindings for the mpc5746c controller and make the reset signal
optional.
Change-Id: I616dd3cfedf18a6e21683e1c07551c57c62a675d
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
This driver creates Network device of type CAN
and processes tx and rx frames that it sends and
receives over SPI protocol.
Change-Id: I54a8665d1b9eda7e9b1ff695bd67de312c410195
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
At bootup, two different contexts access same list
result in crash. Add mutex lock protect around list access.
CRs-Fixed: 2060390
Change-Id: I648db0a96c507c7e3ad9a5bb7d59021ebf86b27e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The patch adds the support for buffering mode configuration
for peripherals not supporting diag_id.
CRs-Fixed: 2104591
Change-Id: I2ed34a5141a9b9042dc925c9109d22009b272484
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
This allows Host to load NDIS 6.0 driver for RNDIS over ethernet.
Design objectives of NDIS 6.0 is to enhance driver performance
and scalability. Observing higher peak tput (308Mbps --> 480Mbps)
for FTP transfer on live network. It resolves the data stall that
is being caused by the sudden transfer abort coming from the NDIS
5.0 Host driver.
Change-Id: I503a5573af71eb1b004c68abb64bb04d7e06f9af
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Increase QMI ATHDIAG maximum data size to 6144 bytes so that it
can dump more bytes for debugging.
Change-Id: I21d6197ad67829c38586318d4e76a7c7fd4149c4
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Information leak issue is reported in mpq_sdmx_log_level_write
function. Added check to validate count is not zero and initialize
the string.
Change-Id: Ieb2ed88c2d7d778c56be2ec3b9875270a9c74dce
Signed-off-by: Udaya Bhaskara Reddy Mallavarapu <udaym@codeaurora.org>
Current SD card resume function does not handle card
init failure but only prints resume error message.
This change powers off mmc host before exit resume
if card init fails.
Change-Id: Idc27d8ed8769b92373bb9770f5e706b18e76404d
Signed-off-by: Can Guo <cang@codeaurora.org>
The WFD setup path has few register writes. If the MDP clocks
aren't switched on, the register access might cause SMMU
faults. Turn on the clocks, before calling WFD setup.
Change-Id: Icc865178f43dc6068b6b4b201b8f9eada2570598
Signed-off-by: Krishna Chaitanya Devarakonda <kdevarak@codeaurora.org>
There is a race condition possible when two threads are calling
the rotator cancel request. This might result in accessing a pointer
which was already assigned NULL. Fixing this by adding an extra check.
Change-Id: I9ce321a5f033d1fdc9d8b70a04098bfba3d7baaa
Signed-off-by: Krishna Chaitanya Devarakonda <kdevarak@codeaurora.org>
Provide means to suspend the DC path using the power supply
property.
Change-Id: I97f83f5f7c892fc078a92914af0a923b6aacf02e
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
* refs/heads/tmp-610af85
Linux 4.4.85
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: ioapic: Clear on-stack resource before using it
ntb_transport: fix bug calculating num_qps_mw
ntb_transport: fix qp count bug
ASoC: rsnd: don't call update callback if it was NULL
ASoC: rsnd: ssi: 24bit data needs right-aligned settings
ASoC: rsnd: Add missing initialization of ADG req_rate
ASoC: rsnd: avoid pointless loop in rsnd_mod_interrupt()
ASoC: rsnd: disable SRC.out only when stop timing
ASoC: simple-card: don't fail if sysclk setting is not supported
staging: rtl8188eu: add RNX-N150NUB support
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
iio: imu: adis16480: Fix acceleration scale factor for adis16480
ANDROID: binder: fix proc->tsk check.
binder: Use wake up hint for synchronous transactions.
binder: use group leader instead of open thread
Bluetooth: bnep: fix possible might sleep error in bnep_session
Bluetooth: cmtp: fix possible might sleep error in cmtp_session
Bluetooth: hidp: fix possible might sleep error in hidp_session_thread
perf/core: Fix group {cpu,task} validation
nfsd: Limit end of page list when decoding NFSv4 WRITE
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
cifs: Fix df output for users with quota limits
tracing: Fix freeing of filter in create_filter() when set_str is false
drm: rcar-du: Fix H/V sync signal polarity configuration
drm: rcar-du: Fix display timing controller parameter
drm: rcar-du: Fix crash in encoder failure error path
drm: rcar-du: lvds: Rename PLLEN bit to PLLON
drm: rcar-du: lvds: Fix PLL frequency-related configuration
drm/atomic: If the atomic check fails, return its value first
drm: Release driver tracking before making the object available again
i2c: designware: Fix system suspend
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978)
ALSA: core: Fix unexpected error at replacing user TLV
Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
Input: trackpoint - add new trackpoint firmware ID
mei: me: add lewisburg device ids
mei: me: add broxton pci device ids
net_sched: fix order of queue length updates in qdisc_replace()
net: sched: fix NULL pointer dereference when action calls some targets
irda: do not leak initialized list.dev to userspace
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
ipv6: repair fib6 tree in failure case
ipv6: reset fn->rr_ptr when replacing route
tipc: fix use-after-free
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
ipv4: better IP_MAX_MTU enforcement
net_sched/sfq: update hierarchical backlog when drop packet
ipv4: fix NULL dereference in free_fib_info_rcu()
dccp: defer ccid_hc_tx_delete() at dismantle time
dccp: purge write queue in dccp_destroy_sock()
af_key: do not use GFP_KERNEL in atomic contexts
ANDROID: NFC: st21nfca: Fix memory OOB and leak issues in connectivity events handler
Linux 4.4.84
usb: qmi_wwan: add D-Link DWM-222 device ID
usb: optimize acpi companion search for usb port devices
perf/x86: Fix LBR related crashes on Intel Atom
pids: make task_tgid_nr_ns() safe
Sanitize 'move_pages()' permission checks
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
x86/asm/64: Clear AC on NMI entries
xen: fix bio vec merging
mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes
mm/mempolicy: fix use after free when calling get_mempolicy
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
ALSA: seq: 2nd attempt at fixing race creating a queue
Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
Input: elan_i2c - add ELAN0608 to the ACPI table
crypto: x86/sha1 - Fix reads beyond the number of blocks passed
parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
audit: Fix use after free in audit_remove_watch_rule()
netfilter: nf_ct_ext: fix possible panic after nf_ct_extend_unregister
ANDROID: check dir value of xfrm_userpolicy_id
ANDROID: NFC: Fix possible memory corruption when handling SHDLC I-Frame commands
ANDROID: nfc: fdp: Fix possible buffer overflow in WCS4000 NFC driver
ANDROID: NFC: st21nfca: Fix out of bounds kernel access when handling ATR_REQ
UPSTREAM: usb: dwc3: gadget: don't send extra ZLP
BACKPORT: usb: dwc3: gadget: handle request->zero
ANDROID: usb: gadget: assign no-op request complete callbacks
ANDROID: usb: gadget: configfs: fix null ptr in android_disconnect
ANDROID: uid_sys_stats: Fix implicit declaration of get_cmdline()
uid_sys_stats: log task io with a debug flag
Linux 4.4.83
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
pnfs/blocklayout: require 64-bit sector_t
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
usb: core: unlink urbs from the tail of the endpoint's urb_list
USB: Check for dropped connection before switching to full speed
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
iio: light: tsl2563: use correct event code
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
USB: hcd: Mark secondary HCD as dead if the primary one died
usb: musb: fix tx fifo flush handling again
USB: serial: pl2303: add new ATEN device id
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
USB: serial: option: add D-Link DWM-222 device ID
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
fuse: initialize the flock flag in fuse_file on allocation
iscsi-target: Fix iscsi_np reset hung task during parallel delete
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
mm: ratelimit PFNs busy info message
cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()
ANDROID: Use sk_uid to replace uid get from socket file
UPSTREAM: arm64: smp: Prevent raw_smp_processor_id() recursion
UPSTREAM: arm64: restore get_current() optimisation
ANDROID: arm64: Fix a copy-paste error in prior init_thread_info build fix
Conflicts:
drivers/misc/Kconfig
drivers/usb/dwc3/gadget.c
include/linux/sched.h
mm/migrate.c
net/netfilter/xt_qtaguid.c
Change-Id: I3a0107fcb5c7455114b316426c9d669bb871acd1
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
