commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream.
Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542 ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.
The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.
Fixes: bbd426f542 ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAlsOO14ACgkQONu9yGCS
aT4ulhAAhMVYSRa/cOFm0BHxSL/59WmJTa3Na8TJqkTrJy+LRluBiKCywyiMZknp
4rIffv4jcxcFNCpqYTjNTSStGLWCCkBLNSzxuzFv5M89Jdx4Gz1Ww1hzMESP3gxK
puHUewSJQm7qtVOiC2l4YcW3Q6nFK0kqbCWpSkHoGVfZoX9JS2P1V8n+KFZpUH1a
UyhVW48ainUpXfhSKJZ5xABiWYM2hcSq52RW1edNZvwuKwulZ+2EME26HgGCK7ff
WHzGHECE6Lem+iunR26J/QtbTo8LKEyU0F039X21E7FIxf33S0xyPx+MGjJfWBOo
Q6A23mAEWwEhlMomNKzdd/iUzSVlWSzKe8LJa7GI5G6BxftN8Z0TGTnKzIDkw++M
T6RfK03CP6c9rQ756d0fTPxdZh6ae9EN8WSot/Sbbc9SvGSfy6o4I8Y/uJygShmF
j13JfMweC+t7/6fyUqc5dcgY0Xy7LUFiWqfPxQj6axDiT82Mx2AvQaczrPUAKr1K
KQsetmyhHC+Cpy7ILrhUGYjEWlvQm11ZiFoX8BkocFLFWk736QA63iB7mOUpCOQR
SKLK00dF163GJdQC6nb4wCtyBxnCg4pSoP/72Z1foPtaSd3ccJ4CLsIE6GY5sP/I
sDlPnIlnzEDfDPIxtVfKC8e1JINP6awXwtoJJo6MnuCuP3LDb58=
=ogZQ
-----END PGP SIGNATURE-----
Merge 4.4.134 into android-4.4
Changes in 4.4.134
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
xfs: remove racy hasattr check from attr ops
do d_instantiate/unlock_new_inode combinations safely
firewire-ohci: work around oversized DMA reads on JMicron controllers
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
dm thin: fix documentation relative to low water mark threshold
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
scsi: fas216: fix sense buffer initialization
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
mm: pin address_space before dereferencing it while isolating an LRU page
IB/ipoib: Fix for potential no-carrier state
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Change pr_debug message to pr_devel
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
ARC: Fix malformed ARC_EMUL_UNALIGNED default
usb: gadget: f_uac2: fix bFirstInterface in composite gadget
usb: gadget: fsl_udc_core: fix ep valid checks
usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
selftests: memfd: add config fragment for fuse
scsi: storvsc: Increase cmd_per_lun for higher speed devices
scsi: aacraid: fix shutdown crash when init fails
scsi: qla4xxx: skip error recovery in case of register disconnect.
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
NFC: llcp: Limit size of SDP URI
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: fix comparison to bitshift when dealing with a mask
usb: musb: fix enumeration after resume
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
media: dmxdev: fix error code for invalid ioctls
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
r8152: fix tx packets accounting
virtio-gpu: fix ioctl and expose the fixed status to userspace.
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
bcache: fix kcrashes with fio in RAID5 backend dev
sit: fix IFLA_MTU ignored on NEWLINK
gianfar: Fix Rx byte accounting for ndev stats
net/tcp/illinois: replace broken algorithm reference link
xen/pirq: fix error path cleanup when binding MSIs
Btrfs: send, fix issuing write op when processing hole in no data mode
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
watchdog: f71808e_wdt: Fix magic close handling
e1000e: Fix check_for_link return value with autoneg off
e1000e: allocate ring descriptors with dma_zalloc_coherent
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
scsi: sd: Keep disk read-only when re-reading partition
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
xen: xenbus: use put_device() instead of kfree()
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
netfilter: ebtables: fix erroneous reject of last rule
bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().
workqueue: use put_device() instead of kfree()
ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
sunvnet: does not support GSO for sctp
net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off
batman-adv: fix header size check in batadv_dbg_arp()
vti4: Don't count header length twice on tunnel setup
vti4: Don't override MTU passed on link creation via IFLA_MTU
perf/cgroup: Fix child event counting bug
RDMA/ucma: Correct option size check using optlen
mm/mempolicy.c: avoid use uninitialized preferred_node
selftests: ftrace: Add probe event argument syntax testcase
selftests: ftrace: Add a testcase for string type with kprobe_event
selftests: ftrace: Add a testcase for probepoint
batman-adv: fix multicast-via-unicast transmission with AP isolation
batman-adv: fix packet loss for broadcasted DHCP packets to a server
ARM: 8748/1: mm: Define vdso_start, vdso_end as array
net: qmi_wwan: add BroadMobi BM806U 2020:2033
net/usb/qmi_wwan.c: Add USB id for lt4120 modem
net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
llc: properly handle dev_queue_xmit() return value
mm/kmemleak.c: wait for scan completion before disabling free
net: Fix untag for vlan packets without ethernet header
net: mvneta: fix enable of all initialized RXQs
sh: fix debug trap failure to process signals before return to user
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
swap: divide-by-zero when zero length swap file on ssd
sr: get/drop reference to device in revalidate and check_events
Force log to disk before reading the AGF during a fstrim
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
scsi: aacraid: Insure command thread is not recursively stopped
dp83640: Ensure against premature access to PHY registers after reset
mm/ksm: fix interaction with THP
mm: fix races between address_space dereference and free in page_evicatable
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
btrfs: Fix possible softlock on single core machines
ocfs2/dlm: don't handle migrate lockres if already in shutdown
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
KVM: VMX: raise internal error for exception during invalid protected mode state
fscache: Fix hanging wait on page discarded by writeback
sparc64: Make atomic_xchg() an inline function rather than a macro.
rtc: snvs: Fix usage of snvs_rtc_enable
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB
btrfs: tests/qgroup: Fix wrong tree backref level
Btrfs: fix copy_items() return value when logging an inode
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
xen/acpi: off by one in read_acpi_id()
ACPI: acpi_pad: Fix memory leak in power saving threads
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
m68k: set dma and coherent masks for platform FEC ethernets
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
hwmon: (nct6775) Fix writing pwmX_mode
rtc: hctosys: Ensure system time doesn't overflow time_t
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
powerpc/perf: Fix kernel address leak via sampling registers
tools/thermal: tmon: fix for segfault
selftests: Print the test we're running to /dev/kmsg
net/mlx5: Protect from command bit overflow
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
ima: Fix Kconfig to select TPM 2.0 CRB interface
ima: Fallback to the builtin hash algorithm
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
arm: dts: socfpga: fix GIC PPI warning
usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
clk: Don't show the incorrect clock phase
zorro: Set up z->dev.dma_mask for the DMA API
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
ACPICA: Events: add a return on failure from acpi_hw_register_read
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
i2c: mv64xxx: Apply errata delay only in standard mode
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
xhci: zero usb device slot_id member when disabling and freeing a xhci slot
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
PCI: Restore config space on runtime resume despite being unbound
ipmi_ssif: Fix kernel panic at msg_done_handler
usb: dwc2: Fix interval type issue
usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
usb: gadget: ffs: Execute copy_to_user() with USER_DS set
powerpc: Add missing prototype for arch_irq_work_raise()
ASoC: topology: create TLV data for dapm widgets
perf/core: Fix perf_output_read_group()
hwmon: (pmbus/max8688) Accept negative page register values
hwmon: (pmbus/adm1275) Accept negative page register values
cdrom: do not call check_disk_change() inside cdrom_open()
gfs2: Fix fallocate chunk size
usb: gadget: udc: change comparison to bitshift when dealing with a mask
usb: gadget: composite: fix incorrect handling of OS desc requests
x86/devicetree: Initialize device tree before using it
x86/devicetree: Fix device IRQ settings in DT
ALSA: vmaster: Propagate slave error
media: cx23885: Override 888 ImpactVCBe crystal frequency
media: cx23885: Set subdev host data to clk_freq pointer
media: s3c-camif: fix out-of-bounds array access
dmaengine: pl330: fix a race condition in case of threaded irqs
media: em28xx: USB bulk packet size fix
clk: rockchip: Prevent calculating mmc phase if clock rate is zero
enic: enable rq before updating rq descriptors
hwrng: stm32 - add reset during probe
staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
rtc: tx4939: avoid unintended sign extension on a 24 bit shift
serial: xuartps: Fix out-of-bounds access through DT alias
serial: samsung: Fix out-of-bounds access through serial port index
serial: mxs-auart: Fix out-of-bounds access through serial port index
serial: imx: Fix out-of-bounds access through serial port index
serial: fsl_lpuart: Fix out-of-bounds access through DT alias
serial: arc_uart: Fix out-of-bounds access through DT alias
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
udf: Provide saner default for invalid uid / gid
media: cx25821: prevent out-of-bounds read on array card
clk: samsung: s3c2410: Fix PLL rates
clk: samsung: exynos5260: Fix PLL rates
clk: samsung: exynos5433: Fix PLL rates
clk: samsung: exynos5250: Fix PLL rates
clk: samsung: exynos3250: Fix PLL rates
crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
audit: return on memory error to avoid null pointer dereference
MIPS: Octeon: Fix logging messages with spurious periods after newlines
drm/rockchip: Respect page offset for PRIME mmap calls
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
perf tests: Use arch__compare_symbol_names to compare symbols
perf report: Fix memory corruption in --branch-history mode --branch-history
selftests/net: fixes psock_fanout eBPF test case
netlabel: If PF_INET6, check sk_buff ip header version
scsi: lpfc: Fix issue_lip if link is disabled
scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
scsi: lpfc: Fix frequency of Release WQE CQEs
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
Bluetooth: btusb: Add device ID for RTL8822BE
kdb: make "mdr" command repeat
s390/ftrace: use expoline for indirect branches
Linux 4.4.134
Change-Id: Iababaf9b89bc8d0437b95e1368d8b0a9126a178c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream.
Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.
Fixes: 597ce1723e ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream.
Correct commit 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset. Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the
register is irreversibly missing from core dumps.
This register is architecturally hardwired and read-only so the write
path does not matter. Ignore data supplied on writes then.
Fixes: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanitize FCSR Cause bit handling, following a trail of past attempts:
* commit 4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR
regression"),
* commit 443c44032a ("MIPS: Always clear FCSR cause bits after
emulation"),
* commit 64bedffe49 ("MIPS: Clear [MSA]FPE CSR.Cause after
notify_die()"),
* commit b1442d39fa ("MIPS: Prevent user from setting FCSR cause
bits"),
* commit b54d2901517d ("Properly handle branch delay slots in connection
with signals.").
Specifically do not mask these bits out in ptrace(2) processing and send
a SIGFPE signal instead whenever a matching pair of an FCSR Cause and
Enable bit is seen as execution of an affected context is about to
resume. Only then clear Cause bits, and even then do not clear any bits
that are set but masked with the respective Enable bits. Adjust Cause
bit clearing throughout code likewise, except within the FPU emulator
proper where they are set according to IEEE 754 exceptions raised as the
operation emulated executed. Do so so that any IEEE 754 exceptions
subject to their default handling are recorded like with operations
executed by FPU hardware.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 5a1aca4469fdccd5b74ba0b4e490173b2b447895)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit c8c5a3a24d395b14447a9a89d61586a913840a3b upstream.
Complement commit c23b3d1a53 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: c23b3d1a53 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17930/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 006501e039eec411842bb3150c41358867d320c2 upstream.
Complement commit d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be07a6a1188372b6d19a3307ec33211fc9c9439d upstream.
Fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit 1db1af84d6
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.
This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.
Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code. Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.
Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well. This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction. If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.
Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible. Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.
Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.
This is based on previous work by Alex Smith, extensively rewritten.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80b3ffce0196ea50068885d085ff981e4b8396f4 upstream.
Update commit d614fd58a283 ("mips/ptrace: Preserve previous registers
for short regset write") bug and consistently consume all data supplied
to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that
a zero data buffer counter is returned where insufficient data has been
given to fill a whole number of FP general registers.
In reality this is not going to happen, as the caller is supposed to
only supply data covering a whole number of registers and it is verified
in `ptrace_regset' and again asserted in `fpr_set', however structuring
code such that the presence of trailing partial FP general register data
causes `fpr_set_msa' to return with a non-zero data buffer counter makes
it appear that this trailing data will be used if there are subsequent
writes made to FP registers, which is going to be the case with the FCSR
once the missing write to that register has been fixed.
Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc24d0edf33c3e15099688b6bbdf7bdc24bf6e91 upstream.
Complement commit d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and ensure that no partial register
write attempt is made with PTRACE_SETREGSET, as we do not preinitialize
any temporaries used to hold incoming register data and consequently
random data could be written.
It is the responsibility of the caller, such as `ptrace_regset', to
arrange for writes to span whole registers only, so here we only assert
that it has indeed happened.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17926/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a03fe72572c12e98f4173f8a535f32468e48b6ec upstream.
In preparation to fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.
No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 547da673173de51f73887377eb275304775064ad upstream.
Fix a commit 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
regression, then activated by commit 6a9c001b7e ("MIPS: Switch ELF
core dumper to use regsets.)", that caused n32 processes to dump o32
core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file
header's `e_flags' member:
$ file tls-core
tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...]
$ ./tls-core
Aborted (core dumped)
$ file core
core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style
$
Previously the flag was set as the result of a:
statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the
regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is
no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the
`->e_flags' member of the regset view chosen is. We have the views
defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64
one, and the latter is used for n32 as well. Consequently an o32 core
file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class
is chosen elsewhere, and the 32-bit one is correctly selected for n32).
Correct the issue then by defining an n32 regset view and using it as
appropriate. Issue discovered in GDB testing.
Fixes: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Djordje Todorovic <djordje.todorovic@rt-rk.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17617/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f32a39d49b25eaa66d2420f1f03d371ea4cd906 upstream.
The sys_exit trace event takes a single return value for the system
call, which MIPS passes the value of the $v0 (result) register, however
MIPS returns positive error codes in $v0 with $a3 specifying that $v0
contains an error code. As a result erroring system calls are traced
returning positive error numbers that can't always be distinguished from
success.
Use regs_return_value() to negate the error code if $a3 is set.
Fixes: 1d7bf993e0 ("MIPS: ftrace: Add support for syscall tracepoints.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16651/
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d614fd58a2834cfe4efa472c33c8f3ce2338b09b upstream.
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abf378be49f38c4d3e23581d3df3fa9f1b1b11d2 upstream.
Correct the cases missed with commit 9b26616c8d ("MIPS: Respect the
ISA level in FCSR handling") and prevent writes to read-only FCSR bits
there.
This in particular applies to FP context initialisation where any IEEE
754-2008 bits preset by `mips_set_personality_nan' are cleared before
the relevant ptrace(2) call takes effect and the PTRACE_POKEUSR request
addressing FPC_CSR where no masking of read-only FCSR bits is done.
Remove the FCSR clearing from FP context initialisation then and unify
PTRACE_POKEUSR/FPC_CSR and PTRACE_SETFPREGS handling, by factoring out
code from `ptrace_setfpregs' and calling it from both places.
This mostly matters to soft float configurations where the emulator can
be switched this way to a mode which should not be accessible and cannot
be set with the CTC1 instruction. With hard float configurations any
effect is transient anyway as read-only bits will retain their values at
the time the FP context is restored.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13239/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4249548454f7ba4581aeee26bd83f42b48a14d15 upstream.
Fix a floating-point context restoration regression introduced with
commit 9b26616c8d ("MIPS: Respect the ISA level in FCSR handling")
that causes a Floating Point exception and consequently a kernel oops
with hard float configurations when one or more FCSR Enable and their
corresponding Cause bits are set both at a time via a ptrace(2) call.
To do so reinstate Cause bit masking originally introduced with commit
b1442d39fa ("MIPS: Prevent user from setting FCSR cause bits") to
address this exact problem and then inadvertently removed from the
PTRACE_SETFPREGS request with the commit referred above.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix "BUG: using smp_processor_id() in preemptible" reported in accesses
to thread's FPU defaults: the value to initialise FSCR to at program
startup, the FCSR r/w mask and the contents of FIR in full FPU
emulation, removing a regression introduced with 9b26616c [MIPS: Respect
the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR
feature flags for full emulation].
Use `boot_cpu_data' to obtain the data from, following the approach that
`cpu_has_*' macros take and avoiding the call to `smp_processor_id' made
in the reference to `current_cpu_data'. The contents of FSCR have to be
consistent across processors in an SMP system, the settings there must
not change as a thread is migrated across processors. And the contents
of FIR are guaranteed to be consistent in FPU emulation, by definition.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10030/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Define the central place the default FCSR value is set from, initialised
in `cpu_probe'. Determine the FCSR mask applied to values written to
the register with CTC1 in the full emulation mode and via ptrace(2),
according to the ISA level of processor hardware or the writability of
bits 31:18 if actual FPU hardware is used.
Software may rely on FCSR bits whose functions our emulator does not
implement, so it should not allow them to be set or software may get
confused. For ptrace(2) it's just sanity.
[ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9711/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a ptracee has not used the FPU and the ptracer sets its FP context
using PTRACE_POKEUSR, PTRACE_SETFPREGS or PTRACE_SETREGSET then that
context will be discarded upon either the ptracee using the FPU or a
further write to the context via ptrace. Prevent this loss by recording
that the task has "used" math once its FP context has been written to.
The context initialisation code that was present for the PTRACE_POKEUSR
case is reused for the other 2 cases to provide consistent behaviour
for the different ptrace requests.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9166/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull audit updates from Eric Paris:
"So this change across a whole bunch of arches really solves one basic
problem. We want to audit when seccomp is killing a process. seccomp
hooks in before the audit syscall entry code. audit_syscall_entry
took as an argument the arch of the given syscall. Since the arch is
part of what makes a syscall number meaningful it's an important part
of the record, but it isn't available when seccomp shoots the
syscall...
For most arch's we have a better way to get the arch (syscall_get_arch)
So the solution was two fold: Implement syscall_get_arch() everywhere
there is audit which didn't have it. Use syscall_get_arch() in the
seccomp audit code. Having syscall_get_arch() everywhere meant it was
a useless flag on the stack and we could get rid of it for the typical
syscall entry.
The other changes inside the audit system aren't grand, fixed some
records that had invalid spaces. Better locking around the task comm
field. Removing some dead functions and structs. Make some things
static. Really minor stuff"
* git://git.infradead.org/users/eparis/audit: (31 commits)
audit: rename audit_log_remove_rule to disambiguate for trees
audit: cull redundancy in audit_rule_change
audit: WARN if audit_rule_change called illegally
audit: put rule existence check in canonical order
next: openrisc: Fix build
audit: get comm using lock to avoid race in string printing
audit: remove open_arg() function that is never used
audit: correct AUDIT_GET_FEATURE return message type
audit: set nlmsg_len for multicast messages.
audit: use union for audit_field values since they are mutually exclusive
audit: invalid op= values for rules
audit: use atomic_t to simplify audit_serial()
kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
audit: reduce scope of audit_log_fcaps
audit: reduce scope of audit_net_id
audit: arm64: Remove the audit arch argument to audit_syscall_entry
arm64: audit: Add audit hook in syscall_trace_enter/exit()
audit: x86: drop arch from __audit_syscall_entry() interface
sparc: implement is_32bit_task
sparc: properly conditionalize use of TIF_32BIT
...
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
The struct user definition in this file is not used anywhere (the ELF
core dumper does not use that format). Therefore, remove the header and
instead enable the asm-generic user.h which is an empty header to
satisfy a few generic headers which still try to include user.h.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7459/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In uapi/asm/ptrace.h, a user version of pt_regs is defined wrapped in
ifndef __KERNEL__. This structure definition does not match anything
used by any kernel API, in particular it does not match the format used
by PTRACE_{GET,SET}REGS.
Therefore, replace the structure definition with one matching what is
used by PTRACE_{GET,SET}REGS. The format used by these is the same for
both 32-bit and 64-bit.
Also, change the implementation of PTRACE_{GET,SET}REGS to use this new
structure definition. The structure is renamed to user_pt_regs when
__KERNEL__ is defined to avoid conflicts with the kernel's own pt_regs.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 6a9c001b7e ("MIPS: Switch ELF core dumper to use regsets.")
switched the core dumper to use regsets, however the GP regset code
simply makes a direct copy of the kernel's pt_regs, which does not
match the original core dump register layout as defined in asm/reg.h.
Furthermore, the definition of pt_regs can vary with certain Kconfig
variables, therefore the GP regset can never be relied upon to return
registers in the same layout.
Therefore, this patch changes the GP regset to match the original core
dump layout. The layout differs for 32- and 64-bit processes, so
separate implementations of the get/set functions are added for the
32- and 64-bit regsets.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: <stable@vger.kernel.org> # v3.13+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
task_user_regset_view() should test for TIF_32BIT_REGS in the flags of
the specified task, not of the current task.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: <stable@vger.kernel.org> # v3.13+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7450/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Whenever ptrace attempts to retrieve the FPU implementation register it
accesses it through current_cpu_data, which calls smp_processor_id().
Since the code may execute with preemption enabled, this can trigger
a warning. Fix this by using boot_cpu_data to get the IR instead.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If one or more matching FCSR cause & enable bits are set in saved thread
context then when that context is restored the kernel will take an FP
exception. This is of course undesirable and considered an oops, leading
to the kernel writing a backtrace to the console and potentially
rebooting depending upon the configuration. Thus the kernel avoids this
situation by clearing the cause bits of the FCSR register when handling
FP exceptions and after emulating FP instructions.
However the kernel does not prevent userland from setting arbitrary FCSR
cause & enable bits via ptrace, using either the PTRACE_POKEUSR or
PTRACE_SETFPREGS requests. This means userland can trivially cause the
kernel to oops on any system with an FPU. Prevent this from happening
by clearing the cause bits when writing to the saved FCSR context via
ptrace.
This problem appears to exist at least back to the beginning of the git
era in the PTRACE_POKEUSR case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7438/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
ptrace_{get,set}_watch_regs access current_cpu_data to get the watch
register count/masks, which calls smp_processor_id(). However they are
run in preemptible context and therefore trigger warnings like so:
[ 6340.092000] BUG: using smp_processor_id() in preemptible [00000000] code: gdb/367
[ 6340.092000] caller is ptrace_get_watch_regs+0x44/0x220
Since the watch register count/masks should be the same across all
CPUs, use boot_cpu_data instead. Note that this may need to change in
future should a heterogenous system be supported where the count/masks
are not the same across all CPUs (the current code is also incorrect
for this scenario - current_cpu_data here would not necessarily be
correct for the CPU that the target task will execute on).
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6879/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull audit updates from Eric Paris.
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
All architecturally defined bits in the FPU implementation register
are read only & unchanging. It contains some implementation-defined
bits but the architecture manual states "This bits are explicitly not
intended to be used for mode control functions" which seems to provide
justification for viewing the register as a whole as unchanging. This
being the case we can simply re-use the value we read at boot rather
than having to re-read it later, and avoid the complexity which that
read entails.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6147/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All architecturally defined bits in the FPU implementation register
are read only & unchanging. It contains some implementation-defined
bits but the architecture manual states "This bits are explicitly not
intended to be used for mode control functions" which seems to provide
justification for viewing the register as a whole as unchanging. This
being the case we can simply re-use the value we read at boot rather
than having to re-read it later, and avoid the complexity which that
read entails.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6144/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When we want to access 64-bit FP register values we can only treat
consecutive registers as being consecutive in memory when the width of
an FP register equals 64 bits. This assumption will not remain true once
MSA support is introduced, so provide a code path which copies each 64
bit FP register value in turn when the width of an FP register differs
from 64 bits.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6427/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch replaces the fpureg_t typedef with a "union fpureg" enabling
easier access to 32 & 64 bit values. This allows the access macros used
in cp1emu.c to be simplified somewhat. It will also make it easier to
expand the width of the FP registers as will be done in a future
patch in order to support the 128 bit registers introduced with MSA.
No behavioural change is intended by this patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6532/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When userland uses syscall() to perform an indirect system call
the actually system call that needs to be checked by the filter
is on the first argument. The kernel code needs to handle this case
by looking at the original syscall number in v0 and if it's
NR_syscall, then it needs to examine the first argument to
identify the real system call that will be executed.
Similarly, we need to 'virtually' shift the syscall() arguments
so the syscall_get_arguments() function can fetch the correct
arguments for the indirect system call.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6404/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS now has the infrastructure for dynamic seccomp-bpf
filtering
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This effectively renames __syscall_get_arch to syscall_get_arch
and implements a compatible interface for the seccomp API.
The seccomp code (kernel/seccomp.c) expects a syscall_get_arch
function to be defined for every architecture, so we drop
the leading underscores from the existing function.
This also makes use of the 'task' argument to determine the type
the process instead of assuming the process has the same
characteristics as the kernel it's running on.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6398/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CPUs implementing MIPS32 R2 may include a 64-bit FPU, just as MIPS64 CPUs
do. In order to preserve backwards compatibility a 64-bit FPU will act
like a 32-bit FPU (by accessing doubles from the least significant 32
bits of an even-odd pair of FP registers) when the Status.FR bit is
zero, again just like a mips64 CPU. The standard O32 ABI is defined
expecting a 32-bit FPU, however recent toolchains support use of a
64-bit FPU from an O32 MIPS32 executable. When an ELF executable is
built to use a 64-bit FPU a new flag (EF_MIPS_FP64) is set in the ELF
header.
With this patch the kernel will check the EF_MIPS_FP64 flag when
executing an O32 binary, and set Status.FR accordingly. The addition
of O32 64-bit FP support lessens the opportunity for optimisation in
the FPU emulator, so a CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option is
introduced to allow this support to be disabled for those that don't
require it.
Inspired by an earlier patch by Leonid Yegoshin, but implemented more
cleanly & correctly.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/6154/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There are no users yet of task_user_regset_view. yet; users will be
implemented rsp activated in subsequent commits.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
