* refs/heads/tmp-5e24b4e
Linux 4.4.153
ovl: warn instead of error if d_type is not supported
ovl: Do d_type check only if work dir creation was successful
ovl: Ensure upper filesystem supports d_type
x86/mm: Fix use-after-free of ldt_struct
x86/mm/pat: Fix L1TF stable backport for CPA
ANDROID: x86_64_cuttlefish_defconfig: Enable lz4 compression for zram
UPSTREAM: drivers/block/zram/zram_drv.c: fix bug storing backing_dev
BACKPORT: zram: introduce zram memory tracking
BACKPORT: zram: record accessed second
BACKPORT: zram: mark incompressible page as ZRAM_HUGE
UPSTREAM: zram: correct flag name of ZRAM_ACCESS
UPSTREAM: zram: Delete gendisk before cleaning up the request queue
UPSTREAM: drivers/block/zram/zram_drv.c: make zram_page_end_io() static
BACKPORT: zram: set BDI_CAP_STABLE_WRITES once
UPSTREAM: zram: fix null dereference of handle
UPSTREAM: zram: add config and doc file for writeback feature
BACKPORT: zram: read page from backing device
BACKPORT: zram: write incompressible pages to backing device
BACKPORT: zram: identify asynchronous IO's return value
BACKPORT: zram: add free space management in backing device
UPSTREAM: zram: add interface to specif backing device
UPSTREAM: zram: rename zram_decompress_page to __zram_bvec_read
UPSTREAM: zram: inline zram_compress
UPSTREAM: zram: clean up duplicated codes in __zram_bvec_write
Linux 4.4.152
reiserfs: fix broken xattr handling (heap corruption, bad retval)
i2c: imx: Fix race condition in dma read
PCI: pciehp: Fix use-after-free on unplug
PCI: Skip MPS logic for Virtual Functions (VFs)
PCI: hotplug: Don't leak pci_slot on registration failure
parisc: Remove unnecessary barriers from spinlock.h
bridge: Propagate vlan add failure to user
packet: refine ring v3 block size test to hold one frame
netfilter: conntrack: dccp: treat SYNC/SYNCACK as invalid if no prior state
xfrm_user: prevent leaking 2 bytes of kernel memory
parisc: Remove ordered stores from syscall.S
ext4: fix spectre gadget in ext4_mb_regular_allocator()
KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
staging: android: ion: check for kref overflow
tcp: identify cryptic messages as TCP seq # bugs
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
net: usb: rtl8150: demote allmulti message to dev_dbg()
net/ethernet/freescale/fman: fix cross-build error
drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()
tcp: remove DELAYED ACK events in DCTCP
qlogic: check kstrtoul() for errors
packet: reset network header if packet shorter than ll reserved space
ixgbe: Be more careful when modifying MAC filters
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot
perf llvm-utils: Remove bashism from kernel include fetch script
bnxt_en: Fix for system hang if request_irq fails
drm/armada: fix colorkey mode property
ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problem
ieee802154: at86rf230: use __func__ macro for debug messages
ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problem
ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
netfilter: x_tables: set module owner for icmp(6) matches
smsc75xx: Add workaround for gigabit link up hardware errata.
kasan: fix shadow_size calculation error in kasan_module_alloc
tracing: Use __printf markup to silence compiler
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
m68k: fix "bad page state" oops on ColdFire boot
bnx2x: Fix receiving tx-timeout in error or recovery state.
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modes
md/raid10: fix that replacement cannot complete recovery after reassemble
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
ARM: dts: da850: Fix interrups property for gpio
selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs
perf report powerpc: Fix crash if callchain is empty
perf test session topology: Fix test on s390
usb: xhci: increase CRS timeout value
ARM: dts: am437x: make edt-ft5x06 a wakeup source
brcmfmac: stop watchdog before detach and free everything
cxgb4: when disabling dcb set txq dcb priority to 0
Smack: Mark inode instant in smack_task_to_inode
ipv6: mcast: fix unsolicited report interval after receiving querys
locking/lockdep: Do not record IRQ state within lockdep code
net: davinci_emac: match the mdio device against its compatible if possible
ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP
net: propagate dev_get_valid_name return code
net: hamradio: use eth_broadcast_addr
enic: initialize enic->rfs_h.lock in enic_probe
qed: Add sanity check for SIMD fastpath handler.
arm64: make secondary_start_kernel() notrace
scsi: xen-scsifront: add error handling for xenbus_printf
usb: gadget: dwc2: fix memory leak in gadget_init()
usb: gadget: composite: fix delayed_status race condition when set_interface
usb: dwc2: fix isoc split in transfer with no data
ARM: dts: Cygnus: Fix I2C controller interrupt type
selftests: sync: add config fragment for testing sync framework
selftests: zram: return Kselftest Skip code for skipped tests
selftests: user: return Kselftest Skip code for skipped tests
selftests: static_keys: return Kselftest Skip code for skipped tests
selftests: pstore: return Kselftest Skip code for skipped tests
netfilter: ipv6: nf_defrag: reduce struct net memory waste
ARC: Explicitly add -mmedium-calls to CFLAGS
ANDROID: x86_64_cuttlefish_defconfig: Enable zram and zstd
BACKPORT: crypto: zstd - Add zstd support
UPSTREAM: zram: add zstd to the supported algorithms list
UPSTREAM: lib: Add zstd modules
UPSTREAM: lib: Add xxhash module
UPSTREAM: zram: rework copy of compressor name in comp_algorithm_store()
UPSTREAM: zram: constify attribute_group structures.
UPSTREAM: zram: count same page write as page_stored
UPSTREAM: zram: reduce load operation in page_same_filled
UPSTREAM: zram: use zram_free_page instead of open-coded
UPSTREAM: zram: introduce zram data accessor
UPSTREAM: zram: remove zram_meta structure
UPSTREAM: zram: use zram_slot_lock instead of raw bit_spin_lock op
BACKPORT: zram: partial IO refactoring
BACKPORT: zram: handle multiple pages attached bio's bvec
UPSTREAM: zram: fix operator precedence to get offset
BACKPORT: zram: extend zero pages to same element pages
BACKPORT: zram: remove waitqueue for IO done
UPSTREAM: zram: remove obsolete sysfs attrs
UPSTREAM: zram: support BDI_CAP_STABLE_WRITES
UPSTREAM: zram: revalidate disk under init_lock
BACKPORT: mm: support anonymous stable page
UPSTREAM: zram: use __GFP_MOVABLE for memory allocation
UPSTREAM: zram: drop gfp_t from zcomp_strm_alloc()
UPSTREAM: zram: add more compression algorithms
UPSTREAM: zram: delete custom lzo/lz4
UPSTREAM: zram: cosmetic: cleanup documentation
UPSTREAM: zram: use crypto api to check alg availability
BACKPORT: zram: switch to crypto compress API
UPSTREAM: zram: rename zstrm find-release functions
UPSTREAM: zram: introduce per-device debug_stat sysfs node
UPSTREAM: zram: remove max_comp_streams internals
UPSTREAM: zram: user per-cpu compression streams
BACKPORT: zsmalloc: require GFP in zs_malloc()
UPSTREAM: zram/zcomp: do not zero out zcomp private pages
UPSTREAM: zram: pass gfp from zcomp frontend to backend
UPSTREAM: socket: close race condition between sock_close() and sockfs_setattr()
ANDROID: Refresh x86_64_cuttlefish_defconfig
Linux 4.4.151
isdn: Disable IIOCDBGVAR
Bluetooth: avoid killing an already killed socket
x86/mm: Simplify p[g4um]d_page() macros
serial: 8250_dw: always set baud rate in dw8250_set_termios
ACPI / PM: save NVS memory for ASUS 1025C laptop
ACPI: save NVS memory for Lenovo G50-45
USB: option: add support for DW5821e
USB: serial: sierra: fix potential deadlock at close
ALSA: vxpocket: Fix invalid endian conversions
ALSA: memalloc: Don't exceed over the requested size
ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry
ALSA: cs5535audio: Fix invalid endian conversion
ALSA: virmidi: Fix too long output trigger loop
ALSA: vx222: Fix invalid endian conversions
ALSA: hda - Turn CX8200 into D3 as well upon reboot
ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs
net_sched: fix NULL pointer dereference when delete tcindex filter
vsock: split dwork to avoid reinitializations
net_sched: Fix missing res info when create new tc_index filter
llc: use refcount_inc_not_zero() for llc_sap_find()
l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache
dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
Conflicts:
drivers/block/zram/zram_drv.c
drivers/staging/android/ion/ion.c
include/linux/swap.h
mm/zsmalloc.c
Change-Id: I1c437ac5133503a939d06d51ec778b65371df6d1
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
The %pK restrictions are used to eliminate exposing kernel addresses.
When kptr_restrict is set to "0" there are no restrictions. When
kptr_restrict is set to "1", kernel pointers printed using the %pK
format specifier will be replaced with 0's unless the user has
CAP_SYSLOG. When kptr_restrict is set to "2", kernel pointers printed
using %pK will be replaced with 0's regardless of privileges.
Change-Id: Iacd8f7b7cdafed3a111507d3da899be9261ff09f
Signed-off-by: Dibyendu Roy <dibyen@codeaurora.org>
Lets fix this obvious coding style issues in the SCO module and bring it
in line with the rest of the Bluetooth subsystem.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the function sco_conn_del have a return type of void now
due to this function always running successfully and thus never
needing to signal its caller when a non recoverable internal failure
occurs by returning a error code to its respective caller.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The return value of l2cap_recv_acldata() and sco_recv_scodata()
are not used, then change it to return void
Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In preparation for changing how struct net is refcounted
on kernel sockets pass the knowledge that we are creating
a kernel socket from sock_create_kern through to sk_alloc.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While compiling the following warning occurs:
WARNING: net/built-in.o(.init.text+0x602c): Section mismatch in
reference from the function bt_init() to the function
.exit.text:sco_exit()
The function __init bt_init() references
a function __exit sco_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
sco_exit() so it may be used outside an exit section.
Since commit 6d785aa345 ("Bluetooth:
Convert mgmt to use HCI chan registration API") the function "sco_exit"
is used inside of function "bt_init". The suggested solution by remove
the __exit annotation solved this issue.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-03-02
Here's the first bluetooth-next pull request targeting the 4.1 kernel:
- ieee802154/6lowpan cleanups
- SCO routing to host interface support for the btmrvl driver
- AMP code cleanups
- Fixes to AMP HCI init sequence
- Refactoring of the HCI callback mechanism
- Added shutdown routine for Intel controllers in the btusb driver
- New config option to enable/disable Bluetooth debugfs information
- Fix for early data reception on L2CAP fixed channels
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.
Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves all the disconn_cfm callbacks to be based on the hci_cb
list. This means making l2cap_disconn_cfm private to l2cap_core.c and
sco_conn_cb private to sco.c respectively. Since the hci_conn type
filtering isn't done any more on the wrapper level the callbacks
themselves need to check that they were passed a relevant type of
connection.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch moves all the connect_cfm callbacks to be based on the hci_cb
list. This means making l2cap_connect_cfm private to l2cap_core.c and
sco_connect_cb private to sco.c respectively. Since the hci_conn type
filtering isn't done any more on the wrapper level the callbacks
themselves need to check that they were passed a relevant type of
connection.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
l2cap/rfcomm/sco_sock_accept() are wait loops which may acquire
sleeping locks. Since both wait loops and sleeping locks use
task_struct.state to sleep and wake, the nested sleeping locks
destroy the wait loop state.
Use the newly-minted wait_woken() and DEFINE_WAIT_FUNC() for the
wait loop. DEFINE_WAIT_FUNC() allows an alternate wake function
to be specified; in this case, the predefined scheduler function,
woken_wake_function(). This wait construct ensures wakeups will
not be missed without requiring the wait loop to set the
task state before condition evaluation. How this works:
CPU 0 | CPU 1
|
| is <condition> set?
| no
set <condition> |
|
wake_up_interruptible |
woken_wake_function |
set WQ_FLAG_WOKEN |
try_to_wake_up |
| wait_woken
| set TASK_INTERRUPTIBLE
| WQ_FLAG_WOKEN? yes
| set TASK_RUNNING
|
| - loop -
|
| is <condition> set?
| yes - exit wait loop
Fixes "do not call blocking ops when !TASK_RUNNING" warnings
in l2cap_sock_accept(), rfcomm_sock_accept() and sco_sock_accept().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds an extra check for ensuring that the size of sockaddr_sco
does not grow larger than sockaddr.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the current process is exiting, lingering on socket close will make
it unkillable, so we should avoid it.
Reproducer:
#include <sys/types.h>
#include <sys/socket.h>
#define BTPROTO_L2CAP 0
#define BTPROTO_SCO 2
#define BTPROTO_RFCOMM 3
int main()
{
int fd;
struct linger ling;
fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
//or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP);
//or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO);
ling.l_onoff = 1;
ling.l_linger = 1000000000;
setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling));
return 0;
}
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
The sco_chan_get helper function is only used in two places and really
only protects conn->sk with a lock. So instead of hiding that fact,
just put the actual code in place where it is used.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The forward declaration of sco_chan_del is not needed and thus just
remove it. Move sco_chan_del into the proper location.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The forward declaration of __sco_chan_add is not needed and thus just
remove it. Move __sco_chan_add into the proper location.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no external user of the SCO timeout constants and thus
move them into net/bluetooth/sco.c where they are actuallu used.
In addition just remove SCO_CONN_IDLE_TIMEOUT since it is unused.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There exists no external user of struct sco_conn and thus move
it into the one place that is actually using it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There exists no external user of struct sco_pinfo and sco_pi and
thus move it into the one place that is actually using it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Several spots in the kernel perform a sequence like:
skb_queue_tail(&sk->s_receive_queue, skb);
sk->sk_data_ready(sk, skb->len);
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of __constant_<foo> has been unnecessary for quite awhile now.
Make these uses consistent with the rest of the kernel.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.
This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.
Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.
Also document these changes in include/linux/net.h as suggested by David
Miller.
Changes since RFC:
Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.
With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
msg->msg_name = NULL
".
This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.
Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.
Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to use IS_ERR_OR_NULL for checking the existing of the root
debugfs dentry bt_debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The address information of SCO sockets should be stored in its own
socket structure. Trying to generalize them is not helpful since
different transports have different address types.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of storing a pointer to the addresses for the HCI device
and HCI connection, use them directly. With the recent changes
to address tracking of HCI connections, this becomes simple.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Older Bluetooth devices may not support Setup Synchronous Connection or
SCO transparent data. This is indicated by the corresponding LMP feature
bits. It is not possible to know if the adapter support these features
before setting BT_VOICE option since the socket is not bound to an
adapter. An adapter can also be added after the socket is created. The
socket can be bound to an address before adapter is plugged in.
Thus, on a such adapters, if user request BT_VOICE_TRANSPARENT, outgoing
connections fail on connect() and returns -EOPNOTSUPP. Incoming
connections do not fail. However, they should only be allowed depending
on what was specified in Write_Voice_Settings command.
EOPNOTSUPP is choosen because connect() system call is failing after
selecting route but before any connection attempt.
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In order to establish a transparent SCO connection, the correct settings
must be specified in the Setup Synchronous Connection request. For that,
a setting field is added to ACL connection data to set up the desired
parameters. The patch also removes usage of hdev->voice_setting in CVSD
connection and makes use of T2 parameters for transparent data.
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When an incoming eSCO connection is requested, check the selected voice
setting and reply appropriately. Voice setting should have been
negotiated previously. For example, in case of HFP, the codec is
negotiated using AT commands on the RFCOMM channel. This patch only
changes replies for socket with deferred setup enabled.
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch extends the current Bluetooth socket options with BT_VOICE.
This is intended to choose voice data type at runtime. It only applies
to SCO sockets. Incoming connections shall be setup during deferred
setup. Outgoing connections shall be setup before connect(). The desired
setting is stored in the SCO socket info. This patch declares needed
members, modifies getsockopt() and setsockopt().
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
From Bluetooth Core v4.0 specification, 7.1.8 Accept Connection Request
Command "When accepting synchronous connection request, the Role
parameter is not used and will be ignored by the BR/EDR Controller."
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
hci_connect is a super function for connecting hci protocols. But the
voice_setting parameter (introduced in subsequent patches) is only
needed by SCO and security requirements are not needed for SCO channels.
Thus, it makes sense to have a separate function for SCO.
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When a socket is in deferred state there does actually exist an
underlying connection even though the connection state is not yet
BT_CONNECTED. In the deferred state it should therefore be allowed to
get socket options that usually depend on a connection, such as
SCO_OPTIONS and SCO_CONNINFO.
This patch fixes the behavior of some user space code that behaves as
follows without it:
$ sudo tools/btiotest -i 00:1B:DC:xx:xx:xx -d -s
accept=2 reject=-1 discon=-1 defer=1 sec=0 update_sec=0 prio=0 voice=0x0000
Listening for SCO connections
bt_io_get(OPT_DEST): getsockopt(SCO_OPTIONS): Transport endpoint is not connected (107)
Accepting connection
Successfully connected to 60:D8:19:xx:xx:xx. handle=43, class=000000
The conditions that the patch updates the if-statements to is taken from
similar code in l2cap_sock.c which correctly handles the deferred state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Since this function is only used by sco, move it from hci_event.c to
sco.c and rename to sco_conn_defer_accept. Make it static.
Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch changes the memory allocation flags in the sco_conn_add
function, replacing the type to GFP_KERNEL. This function is executed
in process context and it is not called inside an atomic section.
Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
We use _get() and _put() for device ref-counting in the kernel. However,
hci_conn_put() is _not_ used for ref-counting, hence, rename it to
hci_conn_drop() so we can later fix ref-counting and introduce
hci_conn_put().
hci_conn_hold() and hci_conn_put() are currently used to manage how long a
connection should be held alive. When the last user drops the connection,
we spawn a delayed work that performs the disconnect. Obviously, this has
nothing to do with ref-counting for the _object_ but rather for the
keep-alive of the connection.
But we really _need_ proper ref-counting for the _object_ to allow
connection-users like rfcomm-tty, HIDP or others.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If the socket is in state BT_CONNECT2 and BT_SK_DEFER_SETUP is set in
the flags, sco_sock_recvmsg() returns early with 0 without updating the
possibly set msg_namelen member. This, in turn, leads to a 128 byte
kernel stack leak in net/socket.c.
Fix this by updating msg_namelen in this case. For all other cases it
will be handled in bt_sock_recvmsg().
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
