* lsk-44/linux-linaro-lsk-v4.4:
Linux 4.4.3
modules: fix modparam async_probe request
module: wrapper for symbol name.
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
prctl: take mmap sem for writing to protect against others
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: inode recovery readahead can race with inode buffer creation
libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
futex: Drop refcount if requeue_pi() acquired the rtmutex
devm_memremap_release(): fix memremap'd addr handling
ipc/shm: handle removed segments gracefully in shm_mmap()
intel_scu_ipcutil: underflow in scu_reg_access()
mm,thp: khugepaged: call pte flush at the time of collapse
dump_stack: avoid potential deadlocks
radix-tree: fix oops after radix_tree_iter_retry
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
MAINTAINERS: return arch/sh to maintained state, with new maintainers
memcg: only free spare array when readers are done
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()
scripts/bloat-o-meter: fix python3 syntax error
dma-debug: switch check from _text to _stext
m32r: fix m32104ut_defconfig build fail
xhci: Fix list corruption in urb dequeue at host removal
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts
iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users
iommu/amd: Correct the wrong setting of alias DTE in do_attach
iommu/vt-d: Don't skip PCI devices when disabling IOTLB
Input: vmmouse - fix absolute device registration
string_helpers: fix precision loss for some inputs
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
Input: elantech - mark protocols v2 and v3 as semi-mt
mm: fix regression in remap_file_pages() emulation
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
mm: fix mlock accouting
libnvdimm: fix namespace object confusion in is_uuid_busy()
mm: soft-offline: check return value in second __get_any_page() call
perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data
KVM: PPC: Fix ONE_REG AltiVec support
KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8
KVM: arm/arm64: Fix reference to uninitialised VGIC
arm64: dma-mapping: fix handling of devices registered before arch_initcall
ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
ARM: OMAP2+: Fix save_secure_ram_context for rodata
ARM: OMAP2+: Fix l2dis_3630 for rodata
ARM: OMAP2+: Fix l2_inv_api_params for rodata
ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
ARM: dts: at91: sama5d4: fix instance id of DBGU
ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
ARM: dts: omap5-board-common: enable rtc and charging of backup battery
ARM: dts: Fix omap5 PMIC control lines for RTC writes
ARM: dts: Fix wl12xx missing clocks that cause hangs
ARM: nomadik: fix up SD/MMC DT settings
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
ARM: 8519/1: ICST: try other dividends than 1
arm64: mm: avoid calling apply_to_page_range on empty range
ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
powerpc/ioda: Set "read" permission when "write" is set
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/eeh: Fix PE location code
SUNRPC: Fixup socket wait for memory
udf: Check output buffer length when converting name to CS0
udf: Prevent buffer overrun with multi-byte characters
udf: limit the maximum number of indirect extents in a row
pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
nfs: Fix race in __update_open_stateid()
pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
NFS: Fix attribute cache revalidation
cifs: fix erroneous return value
cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
cifs: fix race between call_async() and reconnect()
cifs: Ratelimit kernel log messages
iio: inkern: fix a NULL dereference on error
iio: pressure: mpl115: fix temperature offset sign
iio: light: acpi-als: Report data as processed
iio: dac: mcp4725: set iio name property in sysfs
iio: add IIO_TRIGGER dependency to STK8BA50
iio: add HAS_IOMEM dependency to VF610_ADC
iio-light: Use a signed return type for ltr501_match_samp_freq()
iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
iio: adis_buffer: Fix out-of-bounds memory access
scsi: fix soft lockup in scsi_remove_target() on module removal
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
SCSI: fix crashes in sd and sr runtime PM
iscsi-target: Fix potential dead-lock during node acl delete
scsi: add Synology to 1024 sector blacklist
klist: fix starting point removed bug in klist iterators
tracepoints: Do not trace when cpu is offline
tracing: Fix freak link error caused by branch tracer
perf tools: tracepoint_error() can receive e=NULL, robustify it
tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
ptrace: use fsuid, fsgid, effective creds for fs access checks
Btrfs: fix direct IO requests not reporting IO error to user space
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
btrfs: properly set the termination value of ctx->pos in readdir
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
Btrfs: fix fitrim discarding device area reserved for boot loader's use
btrfs: handle invalid num_stripes in sys_array
ext4: don't read blocks from disk after extents being swapped
ext4: fix potential integer overflow
ext4: fix scheduling in atomic on group checksum failure
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
serial: 8250_pci: Add Intel Broadwell ports
tty: Add support for PCIe WCH382 2S multi-IO card
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
staging/speakup: Use tty_ldisc_ref() for paste kworker
phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
phy: twl4030-usb: Relase usb phy on unload
ALSA: seq: Fix double port list deletion
ALSA: seq: Fix leak of pool buffer at concurrent writes
ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
ALSA: hda - Cancel probe work instead of flush at remove
x86/mm: Fix vmalloc_fault() to handle large pages properly
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
x86/mm: Fix types used in pgprot cacheability flags translations
Linux 4.4.2
HID: multitouch: fix input mode switching on some Elan panels
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
zsmalloc: fix migrate_zspage-zs_free race condition
zram: don't call idr_remove() from zram_remove()
zram: try vmalloc() after kmalloc()
zram/zcomp: use GFP_NOIO to allocate streams
rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded
rtlwifi: rtl8821ae: Fix errors in parameter initialization
crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init()
crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts
crypto: atmel-sha - fix atmel_sha_remove()
crypto: algif_skcipher - Do not set MAY_BACKLOG on the async path
crypto: algif_skcipher - Do not dereference ctx without socket lock
crypto: algif_skcipher - Do not assume that req is unchanged
crypto: user - lock crypto_alg_list on alg dump
EVM: Use crypto_memneq() for digest comparisons
crypto: algif_hash - wait for crypto_ahash_init() to complete
crypto: shash - Fix has_key setting
crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
crypto: caam - make write transactions bufferable on PPC platforms
crypto: algif_skcipher - sendmsg SG marking is off by one
crypto: algif_skcipher - Load TX SG list after waiting
crypto: crc32c - Fix crc32c soft dependency
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_hash - Fix race condition in hash_check_key
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_skcipher - Remove custom release parent function
crypto: algif_hash - Remove custom release parent function
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
ahci: Intel DNV device IDs SATA
libata: disable forced PORTS_IMPL for >= AHCI 1.3
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_hash - Require setkey before accept(2)
crypto: hash - Add crypto_ahash_has_setkey
crypto: algif_skcipher - Add nokey compatibility path
crypto: af_alg - Add nokey compatibility path
crypto: af_alg - Fix socket double-free when accept fails
crypto: af_alg - Disallow bind/setkey/... after accept(2)
crypto: algif_skcipher - Require setkey before accept(2)
sched: Fix crash in sched_init_numa()
ext4 crypto: add missing locking for keyring_key access
iommu/io-pgtable-arm: Ensure we free the final level on teardown
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
n_tty: Fix unsafe reference to "other" ldisc
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
usb: xhci: handle both SSIC ports in PME stuck quirk
usb: phy: msm: fix error handling in probe.
usb: cdc-acm: send zero packet for intel 7260 modem
usb: cdc-acm: handle unlinked urb in acm read callback
USB: option: fix Cinterion AHxx enumeration
USB: serial: option: Adding support for Telit LE922
USB: cp210x: add ID for IAI USB to RS485 adaptor
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
usb: hub: do not clear BOS field during reset device
USB: visor: fix null-deref at probe
USB: serial: visor: fix crash on detecting device without write_urbs
ASoC: rt5645: fix the shift bit of IN1 boost
saa7134-alsa: Only frees registered sound cards
ALSA: dummy: Implement timer backend switching more safely
ALSA: hda - Fix bad dereference of jack object
ALSA: hda - Fix speaker output from VAIO AiO machines
Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
ALSA: hda - Fix static checker warning in patch_hdmi.c
ALSA: hda - Add fixup for Mac Mini 7,1 model
ALSA: timer: Fix race between stop and interrupt
ALSA: timer: Fix wrong instance passed to slave callbacks
ALSA: timer: Fix race at concurrent reads
ALSA: timer: Fix link corruption due to double start or stop
ALSA: timer: Fix leftover link at closing
ALSA: timer: Code cleanup
ALSA: seq: Fix lockdep warnings due to double mutex locks
ALSA: seq: Fix race at closing in virmidi driver
ALSA: seq: Fix yet another races among ALSA timer accesses
ASoC: dpcm: fix the BE state on hw_free
ALSA: pcm: Fix potential deadlock in OSS emulation
ALSA: hda/realtek - Support Dell headset mode for ALC225
ALSA: hda/realtek - Support headset mode for ALC225
ALSA: hda/realtek - New codec support of ALC225
ALSA: rawmidi: Fix race at copying & updating the position
ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check
ALSA: rawmidi: Make snd_rawmidi_transmit() race-free
ALSA: seq: Degrade the error message for too many opens
ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()
ALSA: dummy: Disable switching timer backend via sysfs
ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
ALSA: hda - disable dynamic clock gating on Broxton before reset
ALSA: Add missing dependency on CONFIG_SND_TIMER
ALSA: bebob: Use a signed return type for get_formation_index
ALSA: usb-audio: avoid freeing umidi object twice
ALSA: usb-audio: Add native DSD support for PS Audio NuWave DAC
ALSA: usb-audio: Fix OPPO HA-1 vendor ID
ALSA: usb-audio: Add quirk for Microsoft LifeCam HD-6000
ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay
hrtimer: Handle remaining time proper for TIME_LOW_RES
md/raid: only permit hot-add of compatible integrity profiles
media: i2c: Don't export ir-kbd-i2c module alias
parisc: Fix __ARCH_SI_PREAMBLE_SIZE
parisc: Protect huge page pte changes with spinlocks
printk: do cond_resched() between lines while outputting to consoles
tracing/stacktrace: Show entire trace if passed in function not found
tracing: Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()
PCI: Fix minimum allocation address overwrite
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD
mtd: nand: assign reasonable default name for NAND drivers
wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)
wlcore/wl12xx: spi: fix oops on firmware load
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
ocfs2/dlm: ignore cleaning the migration mle that is inuse
ALSA: hda - Implement loopback control switch for Realtek and other codecs
block: fix bio splitting on max sectors
base/platform: Fix platform drivers with no probe callback
HID: usbhid: fix recursive deadlock
ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
block: split bios to max possible length
NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
crypto: sun4i-ss - add missing statesize
Linux 4.4.1
arm64: kernel: fix architected PMU registers unconditional access
arm64: kernel: enforce pmuserenr_el0 initialization and restore
arm64: mm: ensure that the zero page is visible to the page table walker
arm64: Clear out any singlestep state on a ptrace detach operation
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered
powerpc: Make value-returning atomics fully ordered
powerpc/tm: Check for already reclaimed tasks
batman-adv: Drop immediate orig_node free function
batman-adv: Drop immediate batadv_hard_iface free function
batman-adv: Drop immediate neigh_ifinfo free function
batman-adv: Drop immediate batadv_neigh_node free function
batman-adv: Drop immediate batadv_orig_ifinfo free function
batman-adv: Avoid recursive call_rcu for batadv_nc_node
batman-adv: Avoid recursive call_rcu for batadv_bla_claim
team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
net/mlx5_core: Fix trimming down IRQ number
bridge: fix lockdep addr_list_lock false positive splat
ipv6: update skb->csum when CE mark is propagated
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
bonding: Prevent IPv6 link local address on enslaved devices
net: preserve IP control block during GSO segmentation
udp: disallow UFO for sockets with SO_NO_CHECK option
net: pktgen: fix null ptr deref in skb allocation
sched,cls_flower: set key address type when present
tcp_yeah: don't set ssthresh below 2
ipv6: tcp: add rcu locking in tcp_v6_send_synack()
net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory
vxlan: fix test which detect duplicate vxlan iface
unix: properly account for FDs passed over unix sockets
xhci: refuse loading if nousb is used
usb: core: lpm: fix usb3_hardware_lpm sysfs node
USB: cp210x: add ID for ELV Marble Sound Board 1
rtlwifi: fix memory leak for USB device
ASoC: compress: Fix compress device direction check
ASoC: wm5110: Fix PGA clear when disabling DRE
ALSA: timer: Handle disconnection more safely
ALSA: hda - Flush the pending probe work at remove
ALSA: hda - Fix missing module loading with model=generic option
ALSA: hda - Fix bass pin fixup for ASUS N550JX
ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
ALSA: hrtimer: Fix stall by hrtimer_cancel()
ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix double unlink of active_list
ALSA: timer: Fix race among timer ioctls
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: timer: Harden slave timer list handling
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: seq: Fix race at timer setup and close
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
x86/mm: Improve switch_mm() barrier comments
x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
x86/boot: Double BOOT_HEAP_SIZE to 64KB
x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
KVM: x86: correctly print #AC in traces
KVM: x86: expose MSR_TSC_AUX to userspace
x86/xen: don't reset vcpu_info on a cancelled suspend
KEYS: Fix keyring ref leak in join_session_keyring()
Conflicts:
arch/arm64/kernel/perf_event.c
drivers/scsi/sd.c
sound/core/compress_offload.c
Change-Id: I9f77fe42aaae249c24cd6e170202110ab1426878
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
- mixer_ctl_set() function is limiting the volume level
to particular range. This results in incorrect initial
volume setting for that device.
- In USB mixer while calculating the dBmin/dBmax values
resolution factor is hardcoded to 256 which results in
populating the wrong values for dBmin/dBmax.
- Fix is to use appropriate resolution factor while
calculating the dBmin/dBmax values.
CRs-Fixed: 515012
Change-Id: I502355af66f850bb65380c27333c3341fa43a947
Signed-off-by: Deepa Madiregama <dmadireg@codeaurora.org>
kzalloc() and usb_ifnum_to_if() both APIs can return NULL. Current
code is not checking return value and derefencing which may crash
device if it is set to NULL. Fix this by checking return value
against NULL and handling the same.
CRs-Fixed: 562273
Change-Id: I0d2c910f43321e94fc447b19ae3e3207727e24f3
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
commit 07d86ca93db7e5cdf4743564d98292042ec21af7 upstream.
The 'umidi' object will be free'd on the error path by snd_usbmidi_free()
when tearing down the rawmidi interface. So we shouldn't try to free it
in snd_usbmidi_create() after having registered the rawmidi interface.
Found by KASAN.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5327d6ba975042fd3da50ac6e94d1e9551ebeaec upstream.
In my patch adding native DSD support for the Oppo HA-1, the wrong vendor ID got
through. This patch fixes the vendor ID and aligns the comment.
Fixes: a4eae3a506ea ('ALSA: usb: Add native DSD support for Oppo HA-1')
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b3c993a699bed282e47c3f7c49d539c331dae04 upstream.
Microsoft LifeCam HD-6000 (045e:076f) requires the similar quirk for
avoiding the stall due to the invalid sample rate reads.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111491
Signed-off-by: Lev Lybin <lev.lybin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a4ff9ec8d6edd2ab1cfe8ce6a080d6e57cbea9a upstream.
TEAC UD-501/UD-503/NT-503 fail to switch properly between different
rate/format. Similar to 'Playback Design', this patch corrects the
invalid clock source error for TEAC products and avoids complete
freeze of the usb interface of 503 series.
Signed-off-by: Guillaume Fougnies <guillaume@eulerian.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4a359a0049f2e17b012b31e801e96566f6391e5 upstream.
The commit [da6d276957: ALSA: usb-audio: Add resume support for
Native Instruments controls] brought a regression where the Native
Instrument audio devices don't get the correct value at update due to
the missing shift at writing. This patch addresses it.
Fixes: da6d276957 ('ALSA: usb-audio: Add resume support for Native Instruments controls')
Reported-and-tested-by: Owen Williams <owilliams@mixxx.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c06d68bc2a174a6b82dce9f100f55173b9a5189 upstream.
ALSA PCM may still have a leftover instance after disconnection and
it delays its release. The problem is that the PCM close code path of
USB-audio driver has a call of snd_usb_autosuspend(). This involves
with the call of usb_autopm_put_interface() and it may lead to a
kernel Oops due to the NULL object like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
IP: [<ffffffff815ae7ef>] usb_autopm_put_interface+0xf/0x30 PGD 0
Call Trace:
[<ffffffff8173bd94>] snd_usb_autosuspend+0x14/0x20
[<ffffffff817461bc>] snd_usb_pcm_close.isra.14+0x5c/0x90
[<ffffffff8174621f>] snd_usb_playback_close+0xf/0x20
[<ffffffff816ef58a>] snd_pcm_release_substream.part.36+0x3a/0x90
[<ffffffff816ef6b3>] snd_pcm_release+0xa3/0xb0
[<ffffffff816debb0>] snd_disconnect_release+0xd0/0xe0
[<ffffffff8114d417>] __fput+0x97/0x1d0
[<ffffffff8114d589>] ____fput+0x9/0x10
[<ffffffff8109e452>] task_work_run+0x72/0x90
[<ffffffff81088510>] do_exit+0x280/0xa80
[<ffffffff8108996a>] do_group_exit+0x3a/0xa0
[<ffffffff8109261f>] get_signal+0x1df/0x540
[<ffffffff81040903>] do_signal+0x23/0x620
[<ffffffff8114c128>] ? do_readv_writev+0x128/0x200
[<ffffffff810012e1>] prepare_exit_to_usermode+0x91/0xd0
[<ffffffff810013ba>] syscall_return_slowpath+0x9a/0x120
[<ffffffff817587cd>] ? __sys_recvmsg+0x5d/0x70
[<ffffffff810d2765>] ? ktime_get_ts64+0x45/0xe0
[<ffffffff8115dea0>] ? SyS_poll+0x60/0xf0
[<ffffffff818d2327>] int_ret_from_sys_call+0x25/0x8f
We have already a check of disconnection in snd_usb_autoresume(), but
the check is missing its counterpart. The fix is just to put the same
check in snd_usb_autosuspend(), too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4eae3a506ea4a7d4474cd74e20b423fa8053d91 upstream.
This patch adds native DSD support for the Oppo HA-1. It uses a XMOS chipset
but they use their own vendor ID.
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid getting sample rate on AudioQuest DragonFly as it is unsupported
and causes noisy "cannot get freq at ep 0x1" messages when playback
starts.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.
Commit 2d1cb7f658 ("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.
However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.
Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).
Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.
v2: incorporated Takashi Iwai's suggestion for the quirk application
method
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One of the many faults of the QinHeng CH345 USB MIDI interface chip is
that it does not handle received SysEx messages correctly -- every second
event packet has a wrong code index number, which is the one from the last
seen message, instead of 4. For example, the two messages "FE F0 01 02 03
04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event
packets:
correct: CH345:
0F FE 00 00 0F FE 00 00
04 F0 01 02 04 F0 01 02
04 03 04 05 0F 03 04 05
04 06 07 08 04 06 07 08
04 09 0A 0B 0F 09 0A 0B
04 0C 0D 0E 04 0C 0D 0E
05 F7 00 00 05 F7 00 00
A class-compliant driver must interpret an event packet with CIN 15 as
having a single data byte, so the other two bytes would be ignored. The
message received by the host would then be missing two bytes out of six;
in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7".
These corrupted SysEx event packages contain only data bytes, while the
CH345 uses event packets with a correct CIN value only for messages with
a status byte, so it is possible to distinguish between these two cases by
checking for the presence of this status byte.
(Other bugs in the CH345's input handling, such as the corruption resulting
from running status, cannot be worked around.)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CH345 USB MIDI chip has two output ports. However, they are
multiplexed through one pin, and the number of ports cannot be reduced
even for hardware that implements only one connector, so for those
devices, data sent to either port ends up on the same hardware output.
This becomes a problem when both ports are used at the same time, as
longer MIDI commands (such as SysEx messages) are likely to be
interrupted by messages from the other port, and thus to get lost.
It would not be possible for the driver to detect how many ports the
device actually has, except that in practice, _all_ devices built with
the CH345 have only one port. So we can just ignore the device's
descriptors, and hardcode one output port.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device has no mixer (and identifies itself as such), so just skip
the mixer definition.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the Zoom R16/24 (tx_length_quirk set), when calculating the maximum
sample frequency, consideration must be made for the fact that four bytes
of the packet contain a length descriptor and consequently must not be
counted as part of the audio data.
This is corroborated by the wMaxPacketSize for this device, which is 108
bytes according for the USB playback endpoint descriptor. The frame size
is 8 bytes (2 channels of 4 bytes each), and the 108 bytes thus work out
as 13 * 8 + 4, i.e. corresponding to 13 frames plus the additional 4 byte
length descriptor.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Zoom R16/24 have a nonstandard playback format where each isochronous
packet contains a length descriptor in the first four bytes. (Curiously,
capture data does not contain this and requires no quirk.)
The quirk involves adding the extra length descriptor whenever outgoing
isochronous packets are generated, both in pcm.c (outgoing audio) and
endpoint.c (silent data).
In order to make the quirk as unintrusive as possible, for
pcm.c:prepare_playback_urb(), the isochronous packet descriptors are
initially set up in the same way no matter if the quirk is enabled or not.
Once it is time to actually copy the data into the outgoing packet buffer
(together with the added length descriptors) the isochronous descriptors
are adjusted in order take the increased payload length into account.
For endpoint.c:prepare_silent_urb() it makes more sense to modify the
actual function, partly because the function is less complex to start with
and partly because it is not as time-critical as prepare_playback_urb()
(whose bulk is run with interrupts disabled), so the (minute) additional
time spent in the non-quirk case is motivated by the simplicity of having
a single function for all cases.
The quirk is controlled by the new tx_length_quirk member in struct
snd_usb_substream and struct snd_usb_audio, which is conveyed to pcm.c
and endpoint.c from quirks.c in a similar manner to the txfr_quirk member
in the same structs.
In contrast to txfr_quirk however, the quirk is enabled directly in
quirks.c:create_standard_audio_quirk() by checking the USB ID in that
function. Another option would be to introduce a new
QUIRK_AUDIO_ZOOM_INTERFACE or somesuch, which would have made the quirk
very plain to see in the quirk table, but it was felt that the additional
code needed to implement it this way would just make the implementation
more complex with no real gain.
Tested with a Zoom R16, both by doing capture and playback separately
using arecord and aplay (8 channel capture and 2 channel playback,
respectively), as well as capture and playback together using Ardour, as
well as Audacity and Qtractor together with jackd.
The R24 is reportedly compatible with the R16 when used as an audio
interface. Both devices share the same USB ID and have the same number of
inputs (8) and outputs (2). Therefore "R16/24" is mentioned throughout the
patch.
Regression tested using an Edirol UA-5 in both class compliant (16-bit)
and "advanced" (24 bit, forces the use of quirks) modes.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Tested-by: Panu Matilainen <pmatilai@laiskiainen.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Nocturn needs the MIDI_RAW_BYTES quirk, like other Novation devices.
Tested that the Nocturn shows up in aconnect, and that it can be used
as a control surface (using the xtor synthesizer patch editor).
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rounding must take place before multiplication with the frame size, since
each packet contains a whole number of frames.
We must also properly consider the data interval, as a larger data
interval will result in larger packets, which, depending on the sampling
frequency, can result in packet sizes that are less than integral
multiples of the packet size for a lower data interval.
Detailed explanation and rationale:
The code before this commit had the following expression on line 613 to
calculate the maximum isochronous packet size:
maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
>> (16 - ep->datainterval);
Here, ep->freqmax is the maximum assumed sample frequency, calculated from the
nominal sample frequency plus 25%. It is ultimately derived from ep->freqn,
which is in the units of frames per packet, from get_usb_full_speed_rate()
or usb_high_speed_rate(), as applicable, in Q16.16 format.
The expression essentially adds the Q16.16 equivalent of 0.999... (i.e.
the largest number less than one) to the sample rate, in order to get a
rate whose integer part is rounded up from the fractional value. The
multiplication with (frame_bits >> 3) yields the number of bytes in a
packet, and the (16 >> ep->datainterval) then converts it from Q16.16 back
to an integer, taking into consideration the bDataInterval field of the
endpoint descriptor (which describes how often isochronous packets are
transmitted relative to the (micro)frame rate (125us or 1ms, for USB high
speed and full speed, respectively)). For this discussion we will initially
assume a bDataInterval of 0, so the second line of the expression just
converts the Q16.16 value to an integer.
In order to illustrate the problem, we will set frame_bits 64, which
corresponds to a frame size of 8 bytes.
The problem here is twofold. First, the rounding operation consists
of the addition of 0x0.ffff and subsequent conversion to integer, but as the
expression stands, the conversion to integer is done after multiplication
with the frame size, rather than before. This results in the resulting
maxsize becoming too large.
Let's take an example. We have a sample rate of 96 kHz, so our ep->freqn is
0xc0000 (see usb_high_speed_rate()). Add 25% (line 612) and we get 0xf0000.
The calculated maxsize is then ((0xf0000 + 0x0ffff) * 8) >> 16 = 127 .
However, if we do the number of bytes calculation in a less obscure way it's
more apparent what the true corresponding packet size is: we get
ceil(96000 * 1.25 / 8000) * 8 = 120, where 1.25 is the 25% from line 612,
and the 8000 is the number of isochronous packets per second on a high
speed USB connection (125 us microframe interval).
This is fixed by performing the complete rounding operation prior to
multiplication with the frame rate.
The second problem is that when considering the ep->datainterval, this
must be done before rounding, in order to take the advantage of the fact
that if the number of bytes per packet is not an integer, the resulting
rounded-up integer is not necessarily a factor of two when the data
interval is increased by the same factor.
For instance, assuming a freqency of 41 kHz, the resulting
bytes-per-packet value for USB high speed is 41 kHz / 8000 = 5.125, or
0x52000 in Q16.16 format. With a data interval of 1 (ep->datainterval = 0),
this means that 6 frames per packet are needed, whereas with a data
interval of 2 we need 10.25, i.e. 11 frames needed.
Rephrasing the maxsize expression to:
maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) *
(frame_bits >> 3);
for the above 96 kHz example we instead get
((0xf0000 + 0xffff) >> 16) * 8 = 120 which is the correct value.
We can also do the calculation with a non-integer sample rate which is when
rounding comes into effect: say we have 44.1 kHz (resulting ep->freqn =
0x58333, and resulting ep->freqmax 0x58333 * 1.25 = 0x6e3ff (rounded down)):
Original maxsize = ((0x6e3ff + 0xffff) * 8) << 16 = 63 (63.124.. rounded down)
True maxsize = ceil(44100 * 1.25 / 8000) * 8 = 7 * 8 = 56
New maxsize = ((0x6e3ff + 0xffff) >> 16) * 8 = 7 * 8 = 56
This is also corroborated by the wMaxPacketSize check on line 616. Assume
that wMaxPacketSize = 104, with ep->maxpacksize then having the same value.
As 104 < 127, we get maxsize = 104. ep->freqmax is then recalculated to
(104 / 8) << 16 = 0xd0000 . Putting that rate into the original maxsize
calculation yields a maxsize of ((0xd0000 + 0xffff) * 8) >> 16 = 111
(with decimals 111.99988). Clearly, we should get back the 104 here,
which we would with the new expression: ((0xd0000 + 0xffff) >> 16) * 8 = 104 .
(The error has not been a problem because it only results in maxsize being
a bit too big which just wastes a couple of bytes, either as a result of
the first maxsize calculation, or because the resulting calculation will
hit the wMaxPacketSize value before the packet is too big, resulting in
fixing the size to wMaxPacketSize even though the packet is actually not
too long.)
Tested with an Edirol UA-5 both at 44.1 kHz and 96 kHz.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables interrupt transfer mode for MIDI ports on newer
Boss/Roland devices such as the GT-100/001 which support interrupt
transfer on both IN and OUT MIDI endpoints. Previously this wasn't being
enabled for these devices as the code was specifically looking for the
scenario where the IN endpoint supported interrupt transfer and the OUT
endpoint was bulk transfer. Newer devices support interrupt transfer for
both endpoints.
This has been tested on Boss devices GT-001, BR-80 and JS-8 and Roland
VS-20.
It would benefit from some regresison testing with other devices if
possible.
Signed-off-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We want to verify that "value" is either zero or one, so we test if it
is greater than one. Unfortunately, this is a signed int so it could
also be negative. I think this is harmless but it introduces a static
checker warning. Let's make "value" unsigned.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New PCMs will now be added to the end of the chip's PCM list instead of to the
front. This changes the way streams are combined so that the first capture
stream will now be merged with the first playback stream instead of the last.
This fixes a problem with ASUS U7. Cards with one playback stream and cards
without capture streams should be unaffected by this change.
Exception added for M-Audio Audiophile USB (tm) since it seems to have a fix to
swap capture stream numbering in alsa-lib conf/cards/USB-audio.conf
Signed-off-by: Johan Rastén <johan@oljud.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check of cval->cached should be zero-based (including master channel).
Signed-off-by: Yao-Wen Mao <yaowen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In theory, the device may get suspended even at runtime PM suspend.
Currently we don't save the mixer state for autopm, and it may bring
inconsistency.
This patch removes the special handling for autosuspend.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the recent fix of runtime PM for USB-audio driver, we got a
lockdep warning like:
=============================================
[ INFO: possible recursive locking detected ]
4.2.0-rc8+ #61 Not tainted
---------------------------------------------
pulseaudio/980 is trying to acquire lock:
(&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio]
but task is already holding lock:
(&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio]
This comes from snd_usb_autoresume() invoking down_read() and it's
used in a nested way. Although it's basically safe, per se (as these
are read locks), it's better to reduce such spurious warnings.
The read lock is needed to guarantee the execution of "shutdown"
(cleanup at disconnection) task after all concurrent tasks are
finished. This can be implemented in another better way.
Also, the current check of chip->in_pm isn't good enough for
protecting the racy execution of multiple auto-resumes.
This patch rewrites the logic of snd_usb_autoresume() & co; namely,
- The recursive call of autopm is avoided by the new refcount,
chip->active. The chip->in_pm flag is removed accordingly.
- Instead of rwsem, another refcount, chip->usage_count, is introduced
for tracking the period to delay the shutdown procedure. At
the last clear of this refcount, wake_up() to the shutdown waiter is
called.
- The shutdown flag is replaced with shutdown atomic count; this is
for reducing the lock.
- Two new helpers are introduced to simplify the management of these
refcounts; snd_usb_lock_shutdown() increases the usage_count, checks
the shutdown state, and does autoresume. snd_usb_unlock_shutdown()
does the opposite. Most of mixer and other codes just need this,
and simply returns an error if it receives an error from lock.
Fixes: 9003ebb13f ('ALSA: usb-audio: Fix runtime PM unbalance')
Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds native DSD support for the Gustard DAC-X20U.
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input terminal parser recurses into the referenced clock entity to verify
it is existant and thus the terminal descriptor is valid. The actual property
values of the term instance which is initially parsed must not be overriden by
the recursion. For this to work the term properties have to be assigned after
recursing into the referenced clock entity descriptors.
Signed-off-by: Julian Scheel <julian@jusst.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fix for deadlock in PM in commit [1ee23fe07e: ALSA: usb-audio:
Fix deadlocks at resuming] introduced a new check of in_pm flag.
However, the brainless patch author evaluated it in a wrong way
(logical AND instead of logical OR), thus usb_autopm_get_interface()
is wrongly called at probing, leading to unbalance of runtime PM
refcount.
This patch fixes it by correcting the logic.
Reported-by: Hans Yang <hansy@nvidia.com>
Fixes: 1ee23fe07e ('ALSA: usb-audio: Fix deadlocks at resuming')
Cc: <stable@vger.kernel.org> [v3.15+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The M-Audio Transit exposes an interface with a SYNC_NONE attribute.
This is not a valid value according to the USB audio classspec. However
there is a sync endpoint associated to this record. Changing the logic to
try to use this sync endpoint allows for seamless transitions between
altset 2 and altset 3. If any errors happen, the behavior remains the same.
$ more /proc/asound/card1/stream0
M-Audio Transit USB at usb-0000:00:14.0-2, full speed : USB Audio
Playback:
Status: Stop
Interface 1
Altset 1
Format: S24_3LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 48001 - 96000 (continuous)
Interface 1
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 3 OUT (NONE)
Rates: 8000 - 48000 (continuous)
Interface 1
Altset 3
Format: S16_LE
Channels: 2
Endpoint: 3 OUT (ASYNC)
Rates: 8000 - 48000 (continuous)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a transition occurs between alternate settings that do not use the
same synchronization method, the substream pointers were not reset.
This prevents audio from being played during the second transition.
Identified and tested with M-Audio Transit device
(0763:2006 Midiman M-Audio Transit)
Details of the issue:
First playback to adaptive endpoint:
$ aplay -Dhw:1,0 ~/24_96.wav
Playing WAVE '/home/plb/24_96.wav' : Signed 24 bit Little Endian in 3bytes,
Rate 96000 Hz, Stereo
[ 3169.297556] usb 1-2: setting usb interface 1:1
[ 3169.297568] usb 1-2: Creating new playback data endpoint #3
[ 3169.298563] usb 1-2: Setting params for ep #3 (type 0, 3 urbs), ret=0
[ 3169.298574] usb 1-2: Starting data EP @ffff880035fc8000
first playback to asynchronous endpoint:
$ aplay -Dhw:1,0 ~/16_48.wav
Playing WAVE '/home/plb/16_48.wav' : Signed 16 bit Little Endian,
Rate 48000 Hz, Stereo
[ 3204.520251] usb 1-2: setting usb interface 1:3
[ 3204.520264] usb 1-2: Creating new playback data endpoint #3
[ 3204.520272] usb 1-2: Creating new capture sync endpoint #83
[ 3204.521162] usb 1-2: Setting params for ep #3 (type 0, 4 urbs), ret=0
[ 3204.521177] usb 1-2: Setting params for ep #83 (type 1, 4 urbs), ret=0
[ 3204.521182] usb 1-2: Starting data EP @ffff880035fce000
[ 3204.521204] usb 1-2: Starting sync EP @ffff8800bd616000
second playback to adaptive endpoint: no audio and error on terminal:
$ aplay -Dhw:1,0 ~/24_96.wav
Playing WAVE '/home/plb/24_96.wav' : Signed 24 bit Little Endian in 3bytes,
Rate 96000 Hz, Stereo
aplay: pcm_write:1939: write error: Input/output error
[ 3239.483589] usb 1-2: setting usb interface 1:1
[ 3239.483601] usb 1-2: Re-using EP 3 in iface 1,1 @ffff880035fc8000
[ 3239.484590] usb 1-2: Setting params for ep #3 (type 0, 4 urbs), ret=0
[ 3239.484606] usb 1-2: Setting params for ep #83 (type 1, 4 urbs), ret=0
This last line shows that a sync endpoint is used when it shouldn't.
The sync endpoint is no longer valid and the pointers are corrupted
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB Audio Class version 2.0 supports three different parameter block sizes for
CUR requests, which are 1 byte (5.2.3.1 Layout 1 Parameter Block), 2 bytes
(5.2.3.2 Layout 2 Parameter Block) and 4 bytes (5.2.3.3 Layout 3 Parameter
Block). Use the correct size according to the specific control as it was
already done for UACv1. The allocated block size for control requests is
increased to support the 4 byte worst case.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the correct dB ranges of Bose Companion 5 and Drangonfly DAC 1.2.
Signed-off-by: Yao-Wen Mao <yaowen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a monitor stream is active, the next PCM stream access results in
EBUSY error because of the check in line6_stream_start(). Fix this by
just skipping the submission of pending URBs when the stream is
already running instead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101431
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Steinberg MI2 and MI4 interfaces are compatible with the USB class
audio spec, but the MIDI part of the devices is reported as a vendor
specific interface.
This patch adds entries to quirks-table.h to recognize the MIDI
endpoints. Audio functionality was already working and is unaffected by
this change.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Albert Huitsing <albert@huitsing.nl>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Changed ctl type for Input Gain Control and Input Gain Pad Control to
USB_MIXER_S16 as per section 5.2.5.7.11-12 in the USB Audio Class 2.0
definition.
Signed-off-by: Johan Rastén <johan@oljud.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver worked around an error in the MAYA44 USB(+)'s mixer unit
descriptor by aborting before parsing the missing field. However,
aborting parsing too early prevented parsing of the other units
connected to this unit, so the capture mixer controls would be missing.
Fix this by moving the check for this descriptor error after the parsing
of the unit's input pins.
Reported-by: nightmixes <nightmixes@gmail.com>
Tested-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This quirk allows us to avoid the noisy:
current rate 0 is different from the runtime rate
message every time playback starts. While USB DAC in the RR2150
supports reading the sample rate, it never returns a sample rate
other than zero in my observation with common sample rates.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Joe Turner <joe@oampo.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix this from the logs:
usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
