Cleanup ION cache maintenance code to properly validate the target of
userspace cache maintenance requests.
Change-Id: I55b8e3584c59634f95250bc7c0bce5d8d70e6a13
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Reject regsiter_driver request when WLAN FW is already down as
WLAN FW is in a bad state and can't communicate with host driver.
Change-Id: I57ba839101f5c0a361e74060b18b45f87c71634c
CRs-Fixed: 2151726
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Expose APIs to get and set instance ID support by exposing
a mixer control for HAL to set the support status as well as APIs for
kernel components to querry for instance ID support.
CRs-Fixed: 2151551
Change-Id: I76a97c92cd02e28f03a0efb73757c4be75152d1f
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Set freed pointers to NULL to avoid double free
in msm_compr_playback_open and msm_compr_playback_free
functions of compress driver.
CRs-Fixed: 2142216
Change-Id: Ifd011dd85dd9f610c7b69dd460f73d26e006cd66
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Update audio route maps for rx and tx mi2s clk to fix
pop noise during device switch from playback in native mode
to voice call.
CRs-Fixed: 2117960
Change-Id: I75c6cd17ddc7de99fd40415302059545ce18777b
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check the validity of the pointer in user space that you intend to
access. access_ok function simply checks that the address is likely
in user space, not in the kernel.
Change-Id: I936f73a2c2029f9e7ca12cc8fc06d0698e6710c0
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Pop is observed during switch from playback in native mode
to voice call and vice-versa. This is resolved by mclk
reset to non-native mode before hph path powers up.
CRs-Fixed: 2117960
Change-Id: I53d5f985453895d34179610e3a414021eade7bcb
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add support to mount system & vendor partitions during early init
on msm8996.
Change-Id: I6b05edb8d17f192e1d8d9d5e1c0c33a3d1a7c441
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
When the thread processing blocked TA wakes up when listener
becames available, the listener may be unavailable again before
this thread grabs the global mutex, so make change to add a
while loop to check if listener available after wake up and hold
mutex.
Change-Id: Ib386faca7a44325142da1dc54e19a99f3173ec86
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
cmnlib_ion_handle is only used within qseecom_load_commonlib_image()
and is not a shared resource, so change it to a local variable and
avoid potential reuse or free by another thread in case of reentrancy.
Change-Id: I9e1f25cd024a19a7379b7409bdc6521bcd8bcae5
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Reset app_crash flag to make sure app entry is not freed when
there is another client still being blocked on the same app.
Change-Id: I25d236abc97e60fe8a4abbbc8c086291c764a9c1
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Adds a OP-TEE driver which also can be compiled as a loadable module.
* Targets ARM and ARM64
* Supports using reserved memory from OP-TEE as shared memory
* Probes OP-TEE version using SMCs
* Accepts requests on privileged and unprivileged device
* Uses OPTEE message protocol version 2 to communicate with secure world
Change-Id: Iffaf30a91fff2d29dd87e61173c564271bcc7776
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 4fb0a5eb364d239722e745c02aef0dbd4e0f1ad2)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Initial patch for generic TEE subsystem.
This subsystem provides:
* Registration/un-registration of TEE drivers.
* Shared memory between normal world and secure world.
* Ioctl interface for interaction with user space.
* Sysfs implementation_id of TEE driver
A TEE (Trusted Execution Environment) driver is a driver that interfaces
with a trusted OS running in some secure environment, for example,
TrustZone on ARM cpus, or a separate secure co-processor etc.
The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.
This patch builds on other similar implementations trying to solve
the same problem:
* "optee_linuxdriver" by among others
Jean-michel DELORME<jean-michel.delorme@st.com> and
Emmanuel MICHEL <emmanuel.michel@st.com>
* "Generic TrustZone Driver" by Javier González <javier@javigon.com>
Change-Id: I35b763e23b706383df5013c429c510c68d7f4176
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 967c9cca2cc50569efc65945325c173cecba83bd)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE
implementation.
Change-Id: If4b626d0e8a14e2f1cdeac8aa0837e8ddc4dcbdd
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit c8bfafb1594435889b571b79325011e8b7fd087b)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
This function had copies in 3 different files. Unify them in kernel.h.
Change-Id: Iff8fbe002d3ceb81068e9cbd0acdf5fd5be14783
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@intel.com> [drm/i915/]
Acked-by: Rob Clark <robdclark@gmail.com> [drm/msm/]
Acked-by: Lucas Stach <l.stach@pengutronix.de> [drm/etinav/]
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3ed605bc8a0a688d8750a1e2eff39c854418c5cf)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.
Change-Id: Ic3be85884c9d4726211346c6ecfff60ca51b08b7
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit e679660dbb8347f275fe5d83a5dd59c1fb6c8e63)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC.
Change-Id: Iee20985ae688c68c5f3d6494545718c70057661b
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 14457459f9ca2ff8521686168ea179edc3a56a44)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
architectures that may support arm-smccc. It's the responsibility of the
caller to know if the SMC instruction is supported by the platform.
Change-Id: I11bacaf436a1178fee13169f8f65214011044783
Reviewed-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit b329f95d70f3f955093e9a2b18ac1ed3587a8f73)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.
This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.
Change-Id: I36d7927543c5bbb5313417e93e45fec1fb9997af
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 98dd64f34f47ce19b388d9015f767f48393a81eb)
Signed-off-by: Victor Chong <victor.chong@linaro.org>
The shader block size is in dwords. Make sure we copy out all the
bytes that we want.
Change-Id: I42364350ee6314b4830ed11cc06e61d854122543
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
Signed-off-by: Archana Obannagari <aobann@codeaurora.org>
Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.
This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.
The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.
An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.
Bug: 65857891
Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Remove "qcom,mdss-dsi-on-command" and "mdss-dsi-off command"
commands for boot up performance optimization.
The two commands are for native DSI panels without a bridge
chip. However,AUTO platform has adv7533 bridge chip,which
is controlled by I2C instead of the above two commands.
In addition,the two command will cause extra wait for about
210ms in dsi_panel_tx_cmd_set() for dsi_display_enbale().
This make drmAtomicCommit() in libdrm a little slower,
so total boot time will be longer.
Change-Id: I1c95456b1734acb05cf2f38bb4c95441343bffab
Signed-off-by: Daocai <daocai@codeaurora.org>
When device in Low Power Mode, usb driver invokes
suspend and then disconnect upon cable disconnection.
Remove the ep_delay if it is set.
Change-Id: I203d57d70e8c189a2f3bc7f7830392fac98cfbb1
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
After firmware crashes, driver will try to recover the device by
resetting hardware and reloading firmware. Add a debug quirk option
to skip the recovery so that WLAN device can still remain the status
after crash for live debugging.
Change-Id: Ifff26df9ae5ab4c25573ca84e29eed73a79c6525
Signed-off-by: Yue Ma <yuem@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=2wPT
-----END PGP SIGNATURE-----
Merge 4.4.103 into android-4.4
Changes in 4.4.103
s390: fix transactional execution control register handling
s390/runtime instrumention: fix possible memory corruption
s390/disassembler: add missing end marker for e7 table
s390/disassembler: increase show_code buffer size
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
AF_VSOCK: Shrink the area influenced by prepare_to_wait
vsock: use new wait API for vsock_stream_sendmsg()
sched: Make resched_cpu() unconditional
lib/mpi: call cond_resched() from mpi_powm() loop
x86/decoder: Add new TEST instruction pattern
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
MIPS: ralink: Fix MT7628 pinmux
MIPS: ralink: Fix typo in mt7628 pinmux function
ALSA: hda: Add Raven PCI ID
dm bufio: fix integer overflow when limiting maximum cache size
dm: fix race between dm_get_from_kobject() and __dm_destroy()
MIPS: Fix an n32 core file generation regset support regression
MIPS: BCM47XX: Fix LED inversion for WRT54GSv1
autofs: don't fail mount for transient error
nilfs2: fix race condition that causes file system corruption
eCryptfs: use after free in ecryptfs_release_messaging()
bcache: check ca->alloc_thread initialized before wake up it
isofs: fix timestamps beyond 2027
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
nfsd: deal with revoked delegations appropriately
rtlwifi: rtl8192ee: Fix memory leak when loading firmware
rtlwifi: fix uninitialized rtlhal->last_suspend_sec time
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ALSA: pcm: update tstamp only if audio_tstamp changed
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: hda/realtek - Fix ALC700 family no sound issue
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
fs/9p: Compare qid.path in v9fs_test_inode
iscsi-target: Fix non-immediate TMR reference leak
target: Fix QUEUE_FULL + SCSI task attribute handling
KVM: nVMX: set IDTR and GDTR limits when loading L1 host state
KVM: SVM: obey guest PAT
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
clk: ti: dra7-atl-clock: Fix of_node reference counting
clk: ti: dra7-atl-clock: fix child-node lookups
libnvdimm, namespace: fix label initialization to use valid seq numbers
libnvdimm, namespace: make 'resource' attribute only readable by root
IB/srpt: Do not accept invalid initiator port names
IB/srp: Avoid that a cable pull can trigger a kernel crash
NFC: fix device-allocation error return
i40e: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
igbvf: Use smp_rmb rather than read_barrier_depends
ixgbevf: Use smp_rmb rather than read_barrier_depends
i40evf: Use smp_rmb rather than read_barrier_depends
fm10k: Use smp_rmb rather than read_barrier_depends
ixgbe: Fix skb list corruption on Power systems
parisc: Fix validity check of pointer size argument in new CAS implementation
powerpc/signal: Properly handle return value from uprobe_deny_signal()
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: rc: check for integer overflow
cx231xx-cards: fix NULL-deref on missing association descriptor
media: v4l2-ctrl: Fix flags field on Control events
sched/rt: Simplify the IPI based RT balancing logic
fscrypt: lock mutex before checking for bounce page pool
net/9p: Switch to wait_event_killable()
PM / OPP: Add missing of_node_put(np)
e1000e: Fix error path in link detection
e1000e: Fix return value test
e1000e: Separate signaling for link check/link up
RDS: RDMA: return appropriate error on rdma map failures
PCI: Apply _HPX settings only to relevant devices
dmaengine: zx: set DMA_CYCLIC cap_mask bit
net: Allow IP_MULTICAST_IF to set index to L3 slave
net: 3com: typhoon: typhoon_init_one: make return values more specific
net: 3com: typhoon: typhoon_init_one: fix incorrect return values
drm/armada: Fix compile fail
ath10k: fix incorrect txpower set by P2P_DEVICE interface
ath10k: ignore configuring the incorrect board_id
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: set CTS protection VDEV param only if VDEV is up
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
drm: Apply range restriction after color adjustment when allocation
mac80211: Remove invalid flag operations in mesh TSF synchronization
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
iio: light: fix improper return value
staging: iio: cdc: fix improper return value
spi: SPI_FSL_DSPI should depend on HAS_DMA
netfilter: nft_queue: use raw_smp_processor_id()
netfilter: nf_tables: fix oob access
ASoC: rsnd: don't double free kctrl
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
s390/kbuild: enable modversions for symbols exported from asm
xen: xenbus driver must not accept invalid transaction ids
Revert "sctp: do not peel off an assoc from one netns to another one"
Linux 4.4.103
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The kobject used for the process's sysfs node did not provide a
release function, so it did not correctly implement the refcounting.
Add a release callback so that we keep the process structure valid
as long as the kobject is alive.
Change-Id: I6db54092ed29ecd4d2f157188a4f1a5fc70f1edf
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
SMD_DTR_SIG and SMD_CTS_SIG signals are converted to TIOCM_DTR
and TIOCM_RTS respectively, for client notification. This is
incorrect conversion.
SMD_DTR_SIG and SMD_CTS_SIG signals conversion is modified to
TIOCM_DSR and TIOCM_CTS respectively.
CRs-Fixed: 2148119
Change-Id: I7cd61afe4639fc7c5fd993f4047fad3ff04c53a7
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
The parsing logic wrongly assumes the position of the initial/active power
level value in the gpu dts file. This leads to the active power level
always defaulting to a value of 1. Look for the initial power level
one level up in the device tree.
Change-Id: I63f8c8efd05ad3693c6f399f58bed44ac84105d2
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
