The <plat/*.h> headers are going away, and this one is not used. remove it.
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Fix a couple harmless sparse warnings reported by Fengguang Wu.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure the clock rate that will be used is a valid one before
attempting to scale the voltage. Currently the driver assumes it has
a valid frequency from the OPP table, but boards using different
system oscillators might not have exact matches with the OPP table,
and result in a failing call to clk_set_rate().
This is particularily bad because the voltage may be scaled even
though the frequency is not. This will obviously lead to some
unpredictable behavior, especially if the frequency is high and
the voltage is dropped.
Thanks to Joni Lapilainen for reporting crashes seen on 3430/n900.
Reported-by: Joni Lapilainen <joni.lapilainen@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Change de_thread() to use KILLABLE rather than UNINTERRUPTIBLE while
waiting for other threads. The only complication is that we should
clear ->group_exit_task and ->notify_count before we return, and we
should do this under tasklist_lock. -EAGAIN is used to match the
initial signal_group_exit() check/return, it doesn't really matter.
This fixes the (unlikely) race with coredump. de_thread() checks
signal_group_exit() before it starts to kill the subthreads, but this
can't help if another CLONE_VM (but non CLONE_THREAD) task starts the
coredumping after de_thread() unlocks ->siglock. In this case the
killed sub-thread can block in exit_mm() waiting for coredump_finish(),
execing thread waits for that sub-thead, and the coredumping thread
waits for execing thread. Deadlock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the change "Make neigh lookups directly in output packet path"
(commit a263b30936) IPVS can not reach the real server for DR mode
because we resolve the destination address from IP header, not from
route neighbour. Use the new FLOWI_FLAG_KNOWN_NH flag to request
output routes with known nexthop, so that it has preference
on resolving.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flag to request that output route should be
returned with known rt_gateway, in case we want to use
it as nexthop for neighbour resolving.
The returned route can be cached as follows:
- in NH exception: because the cached routes are not shared
with other destinations
- in FIB NH: when using gateway because all destinations for
NH share same gateway
As last option, to return rt_gateway!=0 we have to
set DST_NOCACHE.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new flag to remember when route is via gateway.
We will use it to allow rt_gateway to contain address of
directly connected host for the cases when DST_NOCACHE is
used or when the NH exception caches per-destination route
without DST_NOCACHE flag, i.e. when routes are not used for
other destinations. By this way we force the neighbour
resolving to work with the routed destination but we
can use different address in the packet, feature needed
for IPVS-DR where original packet for virtual IP is routed
via route to real IP.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid checking nh_pcpu_rth_output in fast path,
abort fib_info creation on alloc_percpu failure.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the change "Adjust semantics of rt->rt_gateway"
(commit f8126f1d51) rt_gateway can be 0 but ip_forward() compares
it directly with nexthop. What we want here is to check if traffic
is to directly connected nexthop and to fail if using gateway.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
After "Cache input routes in fib_info nexthops" (commit
d2d68ba9fe) and "Elide fib_validate_source() completely when possible"
(commit 7a9bc9b81a) we can not send ICMP redirects. It seems we
should not cache the RTCF_DOREDIRECT flag in nh_rth_input because
the same fib_info can be used for traffic that is not redirected,
eg. from other input devices or from sources that are not in same subnet.
As result, we have to disable the caching of RTCF_DOREDIRECT
flag and to force source validation for the case when forwarding
traffic to the input device. If traffic comes from directly connected
source we allow redirection as it was done before both changes.
Avoid setting RTCF_DOREDIRECT if IN_DEV_TX_REDIRECTS
is disabled, this can avoid source address validation and to
help caching the routes.
After the change "Adjust semantics of rt->rt_gateway"
(commit f8126f1d51) we should make sure our ICMP_REDIR_HOST messages
contain daddr instead of 0.0.0.0 when target is directly connected.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Use swiotlb_init() instead of swiotlb_init_with_default_size(). The
latter is now a static function (commit 74838b7 "swiotlb: add the late
swiotlb initialization function with iotlb memory").
- Enable interrupts before calling do_notify_resume().
AArch64 clean-up:
- Use the generic implementation of compat_sys_sendfile() on arm64 as
commit 8f9c0119 (introducing the function) has been merged.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=YNXf
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 changes from Catalin Marinas:
"arm64 fixes:
- Use swiotlb_init() instead of swiotlb_init_with_default_size().
The latter is now a static function (commit 74838b7537 "swiotlb:
add the late swiotlb initialization function with iotlb memory").
- Enable interrupts before calling do_notify_resume().
arm64 clean-up:
- Use the generic implementation of compat_sys_sendfile() on arm64 as
commit 8f9c0119d7 (introducing the function) has been merged."
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Enable interrupts before calling do_notify_resume()
arm64: Use the generic compat_sys_sendfile() implementation
arm64: Call swiotlb_init() instead of swiotlb_init_with_default_size()
Pull sparc changes from David S Miller:
"There is an attempt to fix a bad interaction between syscall tracing
and force_successful_syscall() from Al Viro, but it needs to be redone
as it introduced regressions and thus had to be reverted for now.
Al is working on an updated version.
But what we do have here are some significant bzero/memset
improvements for Niagara-4. An 8K page can be cleared in around 600
cycles, because we essentially have a store that behaves like
powerpc's dcbz that we can actually make real use of."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Revert strace hiccups fix.
sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy.
sparc64: Fix strace hiccups when force_successful_syscall() triggers.
sparc64: Rearrange thread info to cheaply clear syscall noerror state.
rx51_si4713_dev is referenced only from rx51_init_si4713.
So the memory for rx51_si4713_dev can be safely freed after init.
Also it references rx51_si4713_board_info which is __initdata_or_module.
fixes the below warning.
WARNING: vmlinux.o(.data+0x30958): Section mismatch in reference from the variable rx51_si4713_dev to the (unknown reference) .init.data:(unknown)
The variable rx51_si4713_dev references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Reported-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
memblock_steal tries to reserve physical memory during boot.
When the requested size is not aligned on the section size
then, the remaining memory available for lowmem becomes
unaligned on the section boundary. There is a issue with this,
which is discussed in the thread below.
https://lkml.org/lkml/2012/6/28/112
The final conclusion from the thread seems to
be align the memblock_steal calls on the SECTION boundary.
The issue comes out when LPAE is enabled, where the
section size is 2MB.
Boot tested this on OMAP5 evm with and without LPAE.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
read_persistent_clock uses a global variable, use a spinlock to
ensure non-atomic updates to the variable don't overlap and cause
time to move backwards.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
It seems IPV6_GRO_CB(skb)->proto can be destroyed in skb_gro_receive()
if a new skb is allocated (to serve as an anchor for frag_list)
We copy NAPI_GRO_CB() only (not the IPV6 specific part) in :
*NAPI_GRO_CB(nskb) = *NAPI_GRO_CB(p);
So we leave IPV6_GRO_CB(nskb)->proto to 0 (fresh skb allocation) instead
of IPPROTO_TCP (6)
ipv6_gro_complete() isnt able to call ops->gro_complete()
[ tcp6_gro_complete() ]
Fix this by moving proto in NAPI_GRO_CB() and getting rid of
IPV6_GRO_CB
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
6a32e4f9dd made the vlan code skip marking
vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if
there was an rx_handler, as the rx_handler could cause the frame to be received
on a different (virtual) vlan-capable interface where that vlan might be
configured.
As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause
frames for unknown vlans to be delivered to the protocol stack as if they had
been received untagged.
For example, if an ipv6 router advertisement that's tagged for a locally not
configured vlan is received on an interface with macvlan interfaces attached,
macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the
macvlan interfaces, which caused it to be passed to the protocol stack, leading
to ipv6 addresses for the announced prefix being configured even though those
are completely unusable on the underlying interface.
The fix moves marking as PACKET_OTHERHOST after the rx_handler so the
rx_handler, if there is one, sees the frame unchanged, but afterwards,
before the frame is delivered to the protocol stack, it gets marked whether
there is an rx_handler or not.
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current GRO can hold packets in gro_list for almost unlimited
time, in case napi->poll() handler consumes its budget over and over.
In this case, napi_complete()/napi_gro_flush() are not called.
Another problem is that gro_list is flushed in non friendly way :
We scan the list and complete packets in the reverse order.
(youngest packets first, oldest packets last)
This defeats priorities that sender could have cooked.
Since GRO currently only store TCP packets, we dont really notice the
bug because of retransmits, but this behavior can add unexpected
latencies, particularly on mice flows clamped by elephant flows.
This patch makes sure no packet can stay more than 1 ms in queue, and
only in stress situations.
It also complete packets in the right order to minimize latencies.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive
packets on a system with >4gb ram unless a 32bit DMA mask is used.
This issue has been around for years and a fix was sent 3.5 years ago, but
there was some debate as to whether it should instead be fixed as a PCI quirk.
http://www.spinics.net/lists/netdev/msg88670.html
However, 18 months later a similar workaround was introduced for another
chipset exhibiting the same problem.
http://www.spinics.net/lists/netdev/msg142287.html
Signed-off-by: Graham Gower <graham.gower@gmail.com>
Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes type assignment issues, function definition and symbol
shadowing which triggered sparse warnings.
Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We report cached pmtu values even if they are already expired.
Change this to not report these values after they are expired
and fix a race in the expire time calculation, as suggested by
Eric Dumazet.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a local tool like tracepath tries to send packets bigger than
the device mtu, we create a nh exeption and set the pmtu to device
mtu. The device mtu does not expire, so check if the device mtu is
smaller than the reported pmtu and don't crerate a nh exeption in
that case.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some protocols, like IPsec still cache routes. So we need to invalidate
the old route on pmtu events to avoid the reuse of stale routes.
We also need to update the mtu and expire time of the route if we already
use a nh exception route, otherwise we ignore newly learned pmtu values
after the first expiration.
With this patch we always invalidate or update the route on pmtu events.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
task_work_run() implementation had the side effect of enabling
interrupts. With commit ac3d0da8 (task_work: Make task_work_add()
lockless), interrupts are no longer enabled revealing the bug in the
arch code. This patch enables the interrupt explicitly before calling
do_notify_resume().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The generic implementation of compat_sys_sendfile() has been introduced
by commit 8f9c0119. This patch removes the arm64 implementation in
favour of the generic one.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Following commit 74838b7 (swiotlb: add the late swiotlb initialization
function with iotlb memory) the swiotlb_init_with_default_size() is a
static function. This patch changes the arm64 code to call
swiotlb_init() instead and use the default size of 64MB. It is assumed
that AArch64 platforms have enough RAM to afford the pre-allocated
swiotlb memory. It also removes the #ifdef around this call since
CONFIG_SWIOTLB is always enabled.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Weinberger from Linutronix. Fastmap is designed to address UBI's slow scanning
issues. Namely, it introduces a new on-flash data-structure called "fastmap",
which stores the information about logical<->physical eraseblocks mappings.
So now to get this information just read the fastmap, instead of doing full
scan. More information here can be found in Richard's announcement in LKML
(Subject: UBI: Fastmap request for inclusion (v19)):
http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109
One thing I want to explicitly say is that fastmap did not have large
enough linux-next exposure. It is partially my fault - I did not respond
quickly enough. I _really_ apologize for this. But it had good testing and
disabled by default, so I do not expect that we'll break anything.
Fastmap is declared as experimental so far, and it is off by default. We
did declare that the on-flash format may be changed. The reason for this is
that no one used it in real production so far, so there is a high risk that
something is missing. Besides, we do not have user-space tools supporting
fastmap so far.
Nevertheless, I suggest we merge this feature. Many people want UBI's scanning
bottleneck to be fixed and merging fastmap now should accelerate its production
use. The plan is to make it bullet-prove, somewhat clean-up, and make it the
default for UBI. I do not know how many kernel releases will it take.
Basically, I what I want to do for fastmap is something like Linus did for
btrfs few years ago.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/Sqc
-----END PGP SIGNATURE-----
Merge tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi
Pull UBI fastmap changes from Artem Bityutskiy:
"This pull request contains the UBI fastmap support implemented by
Richard Weinberger from Linutronix. Fastmap is designed to address
UBI's slow scanning issues. Namely, it introduces a new on-flash
data-structure called "fastmap", which stores the information about
logical<->physical eraseblocks mappings. So now to get this
information just read the fastmap, instead of doing full scan. More
information here can be found in Richard's announcement in LKML
(Subject: UBI: Fastmap request for inclusion (v19)):
http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109
One thing I want to explicitly say is that fastmap did not have large
enough linux-next exposure. It is partially my fault - I did not
respond quickly enough. I _really_ apologize for this. But it had
good testing and disabled by default, so I do not expect that we'll
break anything.
Fastmap is declared as experimental so far, and it is off by default.
We did declare that the on-flash format may be changed. The reason
for this is that no one used it in real production so far, so there is
a high risk that something is missing. Besides, we do not have
user-space tools supporting fastmap so far.
Nevertheless, I suggest we merge this feature. Many people want UBI's
scanning bottleneck to be fixed and merging fastmap now should
accelerate its production use. The plan is to make it bullet-prove,
somewhat clean-up, and make it the default for UBI. I do not know how
many kernel releases will it take.
Basically, I what I want to do for fastmap is something like Linus did
for btrfs few years ago."
* tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi:
UBI: Wire-up fastmap
UBI: Add fastmap core
UBI: Add fastmap support to the WL sub-system
UBI: Add fastmap stuff to attach.c
UBI: Wire-up ->fm_sem
UBI: Add fastmap bits to build.c
UBI: Add self_check_eba()
UBI: Export next_sqnum()
UBI: Add fastmap stuff to ubi.h
UBI: Add fastmap on-flash data structures
This patch implements DMA support into mxs-i2c. DMA transfers are now enabled
via DT. The DMA operation is enabled by default.
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
[wsa: rebased to 3.6-rc7]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJQX7MuAAoJEHm+PkMAQRiG0h0IAJURkrMCAQUxA+Ik66ReH89s
LQcVd0U9uL4UUOi7f5WR64Vf9Cfu6VVGX9ZKSvjpNskvlQaUQPMIt4pMe6g4X4dI
u0bApEy4XZz3nGabUAghIU8jJ8cDmhCG6kPpSiS7pi7KHc0yIa4WFtJRrIpGaIWT
xuK38YOiOHcSDRlLyWZzainMncQp/ixJdxnqVMTonkVLk0q0b84XzOr4/qlLE5lU
i+TsK3PRKdQXgvZ4CebL+srPBwWX1dmgP3VkeBloQbSSenSeELICbFWavn2ml+sF
GXi4dO93oNquL/Oy5SwI666T4uNcrRPaS+5X+xSZgBW/y2aQVJVJuNZg6ZP/uWk=
=0v2l
-----END PGP SIGNATURE-----
Merge tag 'v3.6-rc7' into i2c-embedded/for-next
Linux 3.6-rc7
Needed to get updates from i2c-embedded/for-current into i2c-embedded/for-next
R-Car I2C is similar with SH7760 I2C.
But the SH7760 I2C driver had many workaround operations, since H/W had bugs.
Thus, it was pointless to keep compatible between SH7760 and R-Car I2C drivers.
This patch creates new Renesas R-Car I2C driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Pill drm updates part 2 from Dave Airlie:
"This is the follow-up pull, 3 pieces
a) exynos next stuff, was delayed but looks okay to me, one patch in
v4l bits but it was acked by v4l person.
b) UAPI disintegration bits
c) intel fixes - DP fixes, hang fixes, other misc fixes."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (52 commits)
drm: exynos: hdmi: remove drm common hdmi platform data struct
drm: exynos: hdmi: add support for exynos5 hdmi
drm: exynos: hdmi: replace is_v13 with version check in hdmi
drm: exynos: hdmi: add support for exynos5 mixer
drm: exynos: hdmi: add support to disable video processor in mixer
drm: exynos: hdmi: add support for platform variants for mixer
drm: exynos: hdmi: add support for exynos5 hdmiphy
drm: exynos: hdmi: add support for exynos5 ddc
drm: exynos: remove drm hdmi platform data struct
drm: exynos: hdmi: turn off HPD interrupt in HDMI chip
drm: exynos: hdmi: use s5p-hdmi platform data
drm: exynos: hdmi: fix interrupt handling
drm: exynos: hdmi: support for platform variants
media: s5p-hdmi: add HPD GPIO to platform data
UAPI: (Scripted) Disintegrate include/drm
drm/i915: Fix GT_MODE default value
drm/i915: don't frob the vblank ts in finish_page_flip
drm/i915: call drm_handle_vblank before finish_page_flip
drm/i915: print warning if vmi915_gem_fault error is not handled
drm/i915: EBUSY status handling added to i915_gem_fault().
...
After use generic smp helpers, smp_mb() should be added to keep coherency.
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Kernel common code will enable irq, drop it in init_arch_irq().
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
This patch fixes an assumption that cclk's initial divisor will always be 1 (or
0 in the register). TSCALE is always initialized on startup with a value of 4
regardless of the inital cclk divisor; so, we can't make the assumption without
making lots of other assumptions. The TPERIOD value is set with a value of the
current cclk (value / (HZ * TSCALE)) - 1; so, we need to adjust based on this
initial frequency and not use cclk's initial divisor for adjusting the tscale.
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Lq035 fb driver uses KBUILD_MODNAME which is bf537_lq035 instead of
bf537-lq035.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
This board has a JEDEC ST PSD4256G6V flash device, so enable all the
options needed so it gets probed by default.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Apparently this was lost when we converted to the standard option
parser in 8830d7e07a
Cc: Sachin Prabhu <sprabhu@redhat.com>
Cc: stable@vger.kernel.org # v3.4+
Reported-by: Gregory Lee Bartholomew <gregory.lee.bartholomew@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
wchar_t is currently 16bit so converting a utf8 encoded characters not
in plane 0 (>= 0x10000) to wchar_t (that is calling char2uni) lead to a
-EINVAL return. This patch detect utf8 in cifs_strtoUTF16 and add special
code calling utf8s_to_utf16s.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
kernel_sendmsg() is less likely to return -ENOSPC and it might be
a bug to do so. However, in the past there might have been cases
where a -ENOSPC was returned from a low level driver.
Add a WARN_ON_ONCE() to ensure that it is safe to assume that -ENOSPC
is no longer returned. This -ENOSPC specific handling will be removed
once we are sure it is no longer returned.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull kbuild fixes from Michal Marek:
"Here are two fixes I intended to send after v3.6-rc7, but failed to do
so. So please pull them for v3.7-rc1 and they will be picked up by
stable.
The first one fixes gcc -x <language> syntax in various build-time
tests, which icecream and possible other gcc wrappers did not
understand (and yes, icecream is going to be fixed as well).
The second one fixes make tar-pkg so that unpacking the tarball does
not replace the /lib -> /usr/lib symlink on recent Fedora releases."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix gcc -x syntax
kbuild: Do not package /boot and /lib in make tar-pkg
Someone (over a year ago :-p) asked me to document localmodconfig in the
README file in the source code. I thought it was a good idea but other
things were more important and I simply forgot about it. Well, I
stumbled on the email asking me about this and I'm sending it out now.
Signed-off-by: Steven "Mr. Procrastinator" Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pul ACPI & Power Management updates from Len Brown:
- acpidump utility added
- intel_idle driver now supports IVB Xeon
- turbostat utility can now count SMIs
- ACPI can now bind to USB3 hubs
- misc fixes
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
ACPI: Add new sysfs interface to export device description
ACPI: Harden acpi_table_parse_entries() against BIOS bug
tools/power/turbostat: add option to count SMIs, re-name some options
tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
intel_idle: enable IVB Xeon support
tools/power turbostat: add [-m MSR#] option
tools/power turbostat: make -M output pretty
tools/power turbostat: print more turbo-limit information
tools/power turbostat: delete unused line
tools/power turbostat: run on IVB Xeon
tools/power/acpi/acpidump: create acpidump(8), local make install targets
tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
ACPI: run _OSC after ACPI_FULL_INITIALIZATION
tools/power/acpi/acpidump: create acpidump(8), local make install targets
tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
tools/power/acpi/acpidump: version 20071116
tools/power/acpi/acpidump: version 20070714
tools/power/acpi/acpidump: version 20060606
tools/power/acpi/acpidump: version 20051111
xo15-ebook: convert to module_acpi_driver()
...
This removes a build-time warning in uncompress.h due to incorrectly
cast values being passed to readb/writeb.
Removed arm/io.h and readb/writeb. Read/write directly to the serial
port with a volatile pointer.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
