Fix the following issues found in static analysis:
- missing blank lines after declarations
- unnecessary return in a void function
- exporting world writable files is usually an error
- block comments use * on subsequent and trailing lines
- Add DT binding description and vendor prefixe for the
driver.
- Add Linux Foundation copyright markings.
Change-Id: Id2ed9a6d4e31bd2acd3185bf7ef9c78f8a41cf36
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Signed-off-by: Vevek Venkatesan <vevekv@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Change-Id: Ie366894e9e89707fa2950a7ffbfe4e93059a19a3
Signed-off-by: Lawrence Liao <lawrence_liao@pixart.com>
(cherry picked from commit dfc4349a8aa02bb0b7b0639ad5368a5c85f6520f)
Git-commit: dfc4349a8aa02bb0b7b0639ad5368a5c85f6520f
Git-repo: https://github.com/PixartOpen/pixart-sensor-db810-linux-driver
[shjain@codeaurora.org: removed below listed files from original
commit as they are not needed and to resolve trivial merge conflicts:
1. arch/arm/boot/dts/qcom/apq8094-dragonboard.dtsi
2. arch/arm/boot/dts/qcom/msm8994-pinctrl.dtsi
3. arch/arm/boot/dts/qcom/msm8994.dtsi
4. drivers/input/misc/Makefile
5. drivers/input/misc/ots_pat9125/Makefile
Remove the unused pieces of algorithm from the reference
driver of Pixart PAT9125 Rotating side button.]
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
To support ADSP SVA on wcd934x, dedicated backend dailink needs
to be created. Add the dailink associating the specific cpu dai
and the MAD codec dai.
CRs-Fixed: 1070327
Change-Id: I4152d81e4e951216a8ecdd93562eb1740dbb962c
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Parse the Detailed Timing Descriptors of both EDID blocks for
resolutions. Check if the resolution is already added in local
data base. Also, add tolerance to fps and pclk variations for
a give resolution so that EDID parser can capture all the
resolutions correctly as published by the sink's EDID.
Change-Id: I113988eb21f82eef022723c421b1c1c9d4dead9f
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
When WDSP has crashed, G-link link state is updated with
GLINK_LINK_STATE_DOWN and remote side channels are closed.
Handle the link state down notification from G-link and
close the channels from local side when remote disconnect
channel event occurs.
Change-Id: Id956256fbb3ea6b18a3685a34dcd1f9b16e71e92
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
While flushing debug queues, avoid touching message queues.
Bleeding message queues here can discard FW responses and
forward threads may timeout by not receiving them. This can
cause confusion about timeouts. Hence don't touch message
queues unless you process and send them to forward thread.
CRs-Fixed: 1066658
Change-Id: I7a5a89c32dc4b1284895d01202dcfdd8a90ccda0
Signed-off-by: Praneeth Paladugu <ppaladug@codeaurora.org>
Previously memory retention and preiph control are only set when
device enters/exits idle power collapse mode. The memory retention
and periph setting will remain ON when device is actually in
suspend state, which will cause unnecessary power consumption.
This change updates those setting for both idle power collapse cases
and suspend/resume case. With this change, the memory retention and
periph will be set to OFF in suspend case to optimize power consumption.
Change-Id: I1598dbc97cb9d02b946de5c9803a49d923c7edc1
Signed-off-by: Ping Li <pingli@codeaurora.org>
a540 hardware does not support BCL and LMH after all.
CRs-Fixed: 1075694
Change-Id: I09808145d20ded63b5043cae6510429560cb599e
Signed-off-by: Oleg Perelet <operelet@codeaurora.org>
Call rdev_get_name() to obtain the name to use in the debug
consumer's regulator_get() call so that the debug consumer finds
the correct regulator when the name differs in the constraints
and desc structs.
Change-Id: Id6a47467cd118c89c8f58d1120381d4c64f8efee
CRs-Fixed: 1075693
Signed-off-by: David Collins <collinsd@codeaurora.org>
Temperature compensation is needed for charger die
temperature. Offset and slope coefficients are applied
based on the FAB ID read from the REVID peripheral.
Change-Id: I8516a8109b8c9316dafbd547635d4c97bd50be0c
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Add charger die temperature scaling coefficients based
on FAB ID. If FAB ID support is not available from the
REVID peripheral the driver does not report scaled
temperature for charger die temperature. Update temperature
compensation for PMIC die temperature.
Change-Id: I8864dccc1b53e70dac5d54129339e7224ec8ba67
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
DCVS limit check fails due to coding error in the condition.
With this change, dcvs-limit is correctly interpreted.
CRs-Fixed: 1074911
Change-Id: I38689d490a31a8e02688d0cacaa6f6028f6f79c8
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
REVID peripheral supports reading FAB ID value. Add property
qcom,fab-id-valid to allow clients to access the FAB ID data
for PMICOBALT.
Change-Id: I66463cf3fa7b0fdeba4cb5ee1e34d27b5e736cfb
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
PMICOBALT supports reading the FAB ID from the REVID
peripheral. Add an optional property qcom,fab-id-valid
to check if support for FAB ID is available in the
REVID peripheral for the PMIC.
Change-Id: If8212618baa7533b008228a71740acf1d6c72a52
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
