Add socinfo support and CPU IDs for SDM636
and SDA636 SOCs.
Change-Id: If14654c3fb93a52e4db0270e60cb6e6371ef077f
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add the required device tree files to support all the platforms
with SDM636 and SDA636.
Change-Id: Iff673b1626acb2bb83c0b7706b118e24919c3934
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add speed-bin 3 support in cpr3 driver and device nodes
for sdm660.
CRs-Fixed: 2099889
Change-Id: Ied0da8ea6f9d787d0021716566080c37881b9558
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Add support for downmix mixer control for multi channel primary and
interactive for a stereo device concurrent use case in which
primary is expected to be downmix accordingly mix matrix coefficientsw.
Change-Id: I8d6e72cdac1eea6cdfbc9922e484abaeb36021db
CRs-Fixed: 2093120
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Clients can register and deregister to BAM based on usecase.
IPC Log pages are created during clients registration to BAM.
Update support to destroy log pages during BAM deregistration.
Change-Id: I1da266c61ebd57d6cfead6fc5b64a05be5620cf4
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
This new driver is meant to be a cross-platform abstraction
layer for utilizing the underlying hypervisor system.
This API can be accessed from both user and kernel sides.
The intended users of this are the multimedia drivers who want
to communicate with the host OS to use the multimedia hardware.
Conflicts:
drivers/soc/qcom/Kconfig
drivers/soc/qcom/Makefile
include/uapi/linux/Kbuild
Change-Id: I37743df490d14249a9d378225771367750899eb0
Signed-off-by: Edward Lee <eleekimk@codeaurora.org>
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Create support for early mounting of system and vendor partitions
in the kernel on msm8996 platforms.
Change-Id: I3caf26d3e2a371ccd63a2823fe3e487461a8dd08
Signed-off-by: Anthony Mah <amah@codeaurora.org>
The TX FIFO write reg and the RX FIFO read reg are controlled
by this processor. Keep track of the state of these two indexes
to reduce the amount of SPI reads.
CRs-Fixed: 2093123
Change-Id: I4ffa0e08bce6dabd57f33a13fef8107211ce3f09
Signed-off-by: Chris Lew <clew@codeaurora.org>
Fix the error return path in qcom_step_chg_init() to free up the
allocated memory and registered wake source.
Change-Id: I8f93246d27f79a7c759b3afc4a4544d9ffca7a80
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
the invalid data of sensor_init_cfg_data, is used by
msm_sensor_driver_probe. This cause crash when ioctl
VIDIOC_MSM_SENSOR_INIT_CFG repeatedly and aggressively.
Change-Id: Idffcd3b82b9590dbfdcaf14b80668cc894178f54
Signed-off-by: Haibin Liu <haibinl@codeaurora.org>
Initialize member value of struct audio_aio_write_param after declaration.
CRs-Fixed: 2091953
Change-Id: Iaf3ff1232e85ae8d26e9d97ce4c2aa3408da7a80
Signed-off-by: Yidong Huang <yidongh@codeaurora.org>
Initialize member value of struct apr_client_data after declaration.
CRs-Fixed: 2091948
Change-Id: I8a185ebd4126f7d064de90bf652bc96c2ab7b408
Signed-off-by: Yidong Huang <yidongh@codeaurora.org>
When SSR is triggered when the system does not have a sound card
registered, but has codecs. The pointer card sent from codec driver
to snd_soc_card_change_online_state is NULL. Add null check for soc_card
before dereferencing.
Change-Id: I23342a6cbd9d53e62b2ea11dfe79aad3759df6f0
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Return value of snprintf doesn't account for the terminating
null character it appends to the end of every string.
So this change adds one extra character length to the blob size
to avoid over reading from the client end.
Change-Id: I8919f0b01dcbcad9300c28e070e9b9ca64368db2
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Signed-off-by: Sachin Bhayare <sachin.bhayare@codeaurora.org>
Commit 939c7a4f04 ("tracing: Introduce saved_cmdlines_size file")
introduced ability to change saved cmdlines size. This resized saved
command lines but missed resizing tgid mapping as well.
Another issue is that when the resize happens, it removes saved command
lines and reallocates new memory for it. This introduced a race
condition when reading the global savecmd as this can be freed in the
middle of accessing it causing a use after free access. Fix this by
implementing locking.
Signed-off-by: Adrian Salido <salidoa@google.com>
Bug: 36007735
Change-Id: I334791ac35f8bcbd34362ed112aa624275a46947
Git-repo: https://android.googlesource.com/kernel/common
Git-commit: 7116d306da66de0de21e982024b4d3a3056f4461
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
This reverts commit 7005c6eec7 ("tracing: Free saved_tgids memory
in free_saved_cmdlines_buffer") and commit be0b454d52 ("tracing:
Modify saved_tgids size for change in saved_cmdline_size")
An upstream patch is now available that does the same thing and
handles additional cases as well.
Change-Id: I05cf2dc566a6425e58076ae2e9698335b6d738cc
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
vring_idle_trsh is used in the operational driver, hence
should not be defined as a debugfs variable.
Change-Id: I302fbcb7bbf0237ed989828e83c447a8b5c78996
Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 38d16ab2b2132beeb9777de1508ce2150b2dcd35
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Store initial FW RF calibration result in driver. Set this calibration
result back to FW after each FW reset in order to avoid future calibration
procedures.
Change-Id: Id7dec17d6306e3234285874bd83b71ba4009afef
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: eb4c02155881696ee6abb090d554b765e41d46ed
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
While wil_open is executed, any call to netif_running
would return a success. In case there are failures
within wil_open, should not treat the device as if it
is already opened in relevant functions (like FW recovery
and runtime suspend check).
Fix that by checking the device up flag instead.
Change-Id: I12c4167a49690f93febec3e8ffaec8a5d2cde91d
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 9b2a4c2d534ca45c74488bace32323b26633ff66
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Set wowlan to indicate that 11ad device can wake-up
on any trigger and disconnect.
Change-Id: I12f226921f854a354404d16e592447a98859b205
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: d1fbf07540b7d35df693e2e1d7528d8ca9bdb2c2
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Add statistics for total, min and max suspend time, that
calculates the time the 11ad device was in suspend.
Those statistics will help to estimate the power impact
of d3hot feature.
Change-Id: I14dfa206b141a4d2b5585d637fe94b2eed91d2b7
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 262345265e599fe5ccc75ba435147d17df04bfd6
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Reset 11ad device on resume failure only if no_fw_recovery
is not set.
Change-Id: Id90cc9973c2e06f3e9eeae32d3c9065e49f90212
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: c6622116c5ae56aec47dd3d63be49cabf591162a
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
New FW supports reporting RSSI signal in dBm.
Report RSSI to kernel in case FW has this capability.
Change-Id: I85fdae2e92a38cfb7ab9a5f97dcf363add51b959
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 30868f5d4413759ba82c0703290f2483402fea39
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Currently ion fd is used to extract ion handle to free ion client.
ION FD is not valid if user-space application is crashed so ion handle
is returned to the client during msm_audio_ion_phys_assign() API which
is used to destroy ion client in msm_audio_ion_phys_free() API.
Change-Id: Idcc4ca838741aac26662a679117af9d9c935e630
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
F2FS uses 4 bytes to represent block address. As a result, supported
size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments.
Change-Id: I64d9be6dcc4ab5d8a45359c69d6163ed0209e8fe
Signed-off-by: Jin Qian <jinqian@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Git-commit: b9dd46188edc2f0d1f37328637860bb65a771124
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
Queue 2 intents for adsprpc glink channel to avoid remote
processor failure for glink.
One intent for threads responding back of size 16,
another intent for IST failure responding without intent
request of size 64.
Change-Id: I85444cb0283c57ddf15cf7d1d50b827fe5339d4c
Acked-by: Viswanatham Paduchuri <vpaduchu@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Few function pointers are left uninitialized in dummy transport.
System can crash if these function pointer get dereferenced.
Initialize all the function pointers which can get called, with
dummy functions.
CRs-Fixed: 2067859
Change-Id: I9172776d9ffa0af5deb9898125fc6403fdcdee0f
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
On APQ8096 ADP Lite board, the secondary ADV7533 bridge chip is
removed and its instance is already disabled in current DTS hence
related sde_kms should also remove it. Otherwise, component master
could not find the component for the display instance and causes
drm driver probe failure.
Change-Id: I0fd694cf33eaf8b29ca86efd2ea105ac565bdba1
CRs-Fixed: 2091671
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
