Commit graph

551 commits

Author SHA1 Message Date
Rahul Sharma
faa4206fb7 drm/sde: bridge chip error and smmu fault handling for recovery
This implementation adds the following support:

1. handle bridge chip error reported by driver to DBA. error reported
   to DBA will be send to recovery manager to recover the faulty
   bridge chip by performing a power cycle.

2. smmu fault error notification.

3. detection on errors in bridge chip driver.

Change-Id: I86cc491e3cd25fdcf9b998a0d687baba0a06d836
Signed-off-by: Rahul Sharma <rahsha@codeaurora.org>
2018-07-19 10:08:28 +05:30
Runmin Wang
9cc5c789d9 Merge remote-tracking branch 'msm4.4/tmp-da9a92f' into msm-4.4
* origin/tmp-da9a92f:
  arm64: kaslr: increase randomization granularity
  arm64: relocatable: deal with physically misaligned kernel images
  arm64: don't map TEXT_OFFSET bytes below the kernel if we can avoid it
  arm64: kernel: replace early 64-bit literal loads with move-immediates
  arm64: introduce mov_q macro to move a constant into a 64-bit register
  arm64: kernel: perform relocation processing from ID map
  arm64: kernel: use literal for relocated address of __secondary_switched
  arm64: kernel: don't export local symbols from head.S
  arm64: simplify kernel segment mapping granularity
  arm64: cover the .head.text section in the .text segment mapping
  arm64: move early boot code to the .init segment
  arm64: use 'segment' rather than 'chunk' to describe mapped kernel regions
  arm64: mm: Mark .rodata as RO
  Linux 4.4.16
  ovl: verify upper dentry before unlink and rename
  drm/i915: Revert DisplayPort fast link training feature
  tmpfs: fix regression hang in fallocate undo
  tmpfs: don't undo fallocate past its last page
  crypto: qat - make qat_asym_algs.o depend on asn1 headers
  xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7
  File names with trailing period or space need special case conversion
  cifs: dynamic allocation of ntlmssp blob
  Fix reconnect to not defer smb3 session reconnect long after socket reconnect
  53c700: fix BUG on untagged commands
  s390: fix test_fp_ctl inline assembly contraints
  scsi: fix race between simultaneous decrements of ->host_failed
  ovl: verify upper dentry in ovl_remove_and_whiteout()
  ovl: Copy up underlying inode's ->i_mode to overlay inode
  ARM: mvebu: fix HW I/O coherency related deadlocks
  ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
  ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
  ALSA: hda: add AMD Stoney PCI ID with proper driver caps
  ALSA: hda - fix use-after-free after module unload
  ALSA: ctl: Stop notification after disconnection
  ALSA: pcm: Free chmap at PCM free callback, too
  ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
  ALSA: hda - fix read before array start
  ALSA: hda - Add PCI ID for Kabylake-H
  ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup
  ALSA: timer: Fix negative queue usage by racy accesses
  ALSA: echoaudio: Fix memory allocation
  ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()
  ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
  ALSA: hda - Fix the headset mic jack detection on Dell machine
  ALSA: dummy: Fix a use-after-free at closing
  hwmon: (dell-smm) Cache fan_type() calls and change fan detection
  hwmon: (dell-smm) Disallow fan_type() calls on broken machines
  hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default
  tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
  tty: vt: Fix soft lockup in fbcon cursor blink timer.
  iio:ad7266: Fix probe deferral for vref
  iio:ad7266: Fix support for optional regulators
  iio:ad7266: Fix broken regulator error handling
  iio: accel: kxsd9: fix the usage of spi_w8r8()
  staging: iio: accel: fix error check
  iio: hudmidity: hdc100x: fix incorrect shifting and scaling
  iio: humidity: hdc100x: fix IIO_TEMP channel reporting
  iio: humidity: hdc100x: correct humidity integration time mask
  iio: proximity: as3935: fix buffer stack trashing
  iio: proximity: as3935: remove triggered buffer processing
  iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
  iio: light apds9960: Add the missing dev.parent
  iio:st_pressure: fix sampling gains (bring inline with ABI)
  iio: Fix error handling in iio_trigger_attach_poll_func
  xen/balloon: Fix declared-but-not-defined warning
  perf/x86: Fix undefined shift on 32-bit kernels
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  drm/vmwgfx: Fix error paths when mapping framebuffer
  drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
  drm/vmwgfx: Check pin count before attempting to move a buffer
  drm/vmwgfx: Work around mode set failure in 2D VMs
  drm/vmwgfx: Add an option to change assumed FB bpp
  drm/ttm: Make ttm_bo_mem_compat available
  drm: atmel-hlcdc: actually disable scaling when no scaling is required
  drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
  drm: add missing drm_mode_set_crtcinfo call
  drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
  drm/i915: Update ifdeffery for mutex->owner
  drm/i915: Refresh cached DP port register value on resume
  drm/i915/ilk: Don't disable SSC source if it's in use
  drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern
  drm/nouveau: fix for disabled fbdev emulation
  drm/nouveau/fbcon: fix out-of-bounds memory accesses
  drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
  drm/nouveau/disp/sor/gf119: both links use the same training register
  virtio_balloon: fix PFN format for virtio-1
  drm/dp/mst: Always clear proposed vcpi table for port.
  drm/amdkfd: destroy dbgmgr in notifier release
  drm/amdkfd: unbind only existing processes
  ubi: Make recover_peb power cut aware
  drm/amdgpu/gfx7: fix broken condition check
  drm/radeon: fix asic initialization for virtualized environments
  btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
  percpu: fix synchronization between synchronous map extension and chunk destruction
  percpu: fix synchronization between chunk->map_extend_work and chunk destruction
  af_unix: fix hard linked sockets on overlay
  vfs: add d_real_inode() helper
  arm64: Rework valid_user_regs
  ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()
  drm/mgag200: Black screen fix for G200e rev 4
  iommu/amd: Fix unity mapping initialization race
  iommu/vt-d: Enable QI on all IOMMUs before setting root entry
  iommu/arm-smmu: Wire up map_sg for arm-smmu-v3
  base: make module_create_drivers_dir race-free
  tracing: Handle NULL formats in hold_module_trace_bprintk_format()
  HID: multitouch: enable palm rejection for Windows Precision Touchpad
  HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands
  HID: elo: kill not flush the work
  KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.
  kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES
  KEYS: potential uninitialized variable
  ARCv2: LLSC: software backoff is NOT needed starting HS2.1c
  ARCv2: Check for LL-SC livelock only if LLSC is enabled
  ipv6: Fix mem leak in rt6i_pcpu
  cdc_ncm: workaround for EM7455 "silent" data interface
  net_sched: fix mirrored packets checksum
  packet: Use symmetric hash for PACKET_FANOUT_HASH.
  sched/fair: Fix cfs_rq avg tracking underflow
  UBIFS: Implement ->migratepage()
  mm: Export migrate_page_move_mapping and migrate_page_copy
  MIPS: KVM: Fix modular KVM under QEMU
  ARM: 8579/1: mm: Fix definition of pmd_mknotpresent
  ARM: 8578/1: mm: ensure pmd_present only checks the valid bit
  ARM: imx6ul: Fix Micrel PHY mask
  NFS: Fix another OPEN_DOWNGRADE bug
  make nfs_atomic_open() call d_drop() on all ->open_context() errors.
  nfsd: check permissions when setting ACLs
  posix_acl: Add set_posix_acl
  nfsd: Extend the mutex holding region around in nfsd4_process_open2()
  nfsd: Always lock state exclusively.
  nfsd4/rpc: move backchannel create logic into rpc code
  writeback: use higher precision calculation in domain_dirty_limits()
  thermal: cpu_cooling: fix improper order during initialization
  uvc: Forward compat ioctls to their handlers directly
  Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"
  x86/amd_nb: Fix boot crash on non-AMD systems
  kprobes/x86: Clear TF bit in fault on single-stepping
  x86, build: copy ldlinux.c32 to image.iso
  locking/static_key: Fix concurrent static_key_slow_inc()
  locking/qspinlock: Fix spin_unlock_wait() some more
  locking/ww_mutex: Report recursive ww_mutex locking early
  of: irq: fix of_irq_get[_byname]() kernel-doc
  of: fix autoloading due to broken modalias with no 'compatible'
  mnt: If fs_fully_visible fails call put_filesystem.
  mnt: Account for MS_RDONLY in fs_fully_visible
  mnt: fs_fully_visible test the proper mount for MNT_LOCKED
  usb: common: otg-fsm: add license to usb-otg-fsm
  USB: EHCI: declare hostpc register as zero-length array
  usb: dwc2: fix regression on big-endian PowerPC/ARM systems
  powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
  powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
  powerpc/pseries: Fix PCI config address for DDW
  powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
  IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs
  IB/cm: Fix a recently introduced locking bug
  EDAC, sb_edac: Fix rank lookup on Broadwell
  mac80211: Fix mesh estab_plinks counting in STA removal case
  mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNAL
  mac80211: mesh: flush mesh paths unconditionally
  mac80211: fix fast_tx header alignment
  Linux 4.4.15
  usb: dwc3: exynos: Fix deferred probing storm.
  usb: host: ehci-tegra: Grab the correct UTMI pads reset
  usb: gadget: fix spinlock dead lock in gadgetfs
  USB: mos7720: delete parport
  xhci: Fix handling timeouted commands on hosts in weird states.
  USB: xhci: Add broken streams quirk for Frescologic device id 1009
  usb: xhci-plat: properly handle probe deferral for devm_clk_get()
  xhci: Cleanup only when releasing primary hcd
  usb: musb: host: correct cppi dma channel for isoch transfer
  usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
  usb: musb: Stop bulk endpoint while queue is rotated
  usb: musb: only restore devctl when session was set in backup
  usb: quirks: Add no-lpm quirk for Acer C120 LED Projector
  usb: quirks: Fix sorting
  USB: uas: Fix slave queue_depth not being set
  crypto: user - re-add size check for CRYPTO_MSG_GETALG
  crypto: ux500 - memmove the right size
  crypto: vmx - Increase priority of aes-cbc cipher
  AX.25: Close socket connection on session completion
  bpf: try harder on clones when writing into skb
  net: alx: Work around the DMA RX overflow issue
  net: macb: fix default configuration for GMAC on AT91
  neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()
  bpf, perf: delay release of BPF prog after grace period
  sock_diag: do not broadcast raw socket destruction
  Bridge: Fix ipv6 mc snooping if bridge has no ipv6 address
  ipmr/ip6mr: Initialize the last assert time of mfc entries.
  netem: fix a use after free
  esp: Fix ESN generation under UDP encapsulation
  sit: correct IP protocol used in ipip6_err
  net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG
  net_sched: fix pfifo_head_drop behavior vs backlog
  sdcardfs: Truncate packages_gid.list on overflow
  UPSTREAM: cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
  BACKPORT: proc: add /proc/<pid>/timerslack_ns interface
  BACKPORT: timer: convert timer_slack_ns from unsigned long to u64
  netfilter: xt_quota2: make quota2_log work well
  Revert "usb: gadget: prevent change of Host MAC address of 'usb0' interface"
  BACKPORT: PM / sleep: Go direct_complete if driver has no callbacks
  ANDROID: base-cfg: enable UID_CPUTIME
  UPSTREAM: USB: usbfs: fix potential infoleak in devio
  UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_ccallback
  UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
  UPSTREAM: ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS
  ANDROID: configs: remove unused configs
  ANDROID: cpu: send KOBJ_ONLINE event when enabling cpus
  ANDROID: dm verity fec: initialize recursion level
  ANDROID: dm verity fec: fix RS block calculation
  Linux 4.4.14
  netfilter: x_tables: introduce and use xt_copy_counters_from_user
  netfilter: x_tables: do compat validation via translate_table
  netfilter: x_tables: xt_compat_match_from_user doesn't need a retval
  netfilter: ip6_tables: simplify translate_compat_table args
  netfilter: ip_tables: simplify translate_compat_table args
  netfilter: arp_tables: simplify translate_compat_table args
  netfilter: x_tables: don't reject valid target size on some architectures
  netfilter: x_tables: validate all offsets and sizes in a rule
  netfilter: x_tables: check for bogus target offset
  netfilter: x_tables: check standard target size too
  netfilter: x_tables: add compat version of xt_check_entry_offsets
  netfilter: x_tables: assert minimum target size
  netfilter: x_tables: kill check_entry helper
  netfilter: x_tables: add and use xt_check_entry_offsets
  netfilter: x_tables: validate targets of jumps
  netfilter: x_tables: don't move to non-existent next rule
  drm/core: Do not preserve framebuffer on rmfb, v4.
  crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
  netfilter: x_tables: fix unconditional helper
  netfilter: x_tables: make sure e->next_offset covers remaining blob size
  netfilter: x_tables: validate e->target_offset early
  MIPS: Fix 64k page support for 32 bit kernels.
  sparc64: Fix return from trap window fill crashes.
  sparc: Harden signal return frame checks.
  sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
  sparc64: Reduce TLB flushes during hugepte changes
  sparc/PCI: Fix for panic while enabling SR-IOV
  sparc64: Fix sparc64_set_context stack handling.
  sparc64: Fix numa node distance initialization
  sparc64: Fix bootup regressions on some Kconfig combinations.
  sparc: Fix system call tracing register handling.
  fix d_walk()/non-delayed __d_free() race
  sched: panic on corrupted stack end
  proc: prevent stacking filesystems on top
  x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
  wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
  ecryptfs: forbid opening files without mmap handler
  memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
  parisc: Fix pagefault crash in unaligned __get_user() call
  pinctrl: mediatek: fix dual-edge code defect
  powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
  powerpc: Use privileged SPR number for MMCR2
  powerpc: Fix definition of SIAR and SDAR registers
  powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
  arm64: mm: always take dirty state from new pte in ptep_set_access_flags
  arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
  crypto: ccp - Fix AES XTS error for request sizes above 4096
  crypto: public_key: select CRYPTO_AKCIPHER
  irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
  s390/bpf: reduce maximum program size to 64 KB
  s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
  gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
  ARM: fix PTRACE_SETVFPREGS on SMP systems
  ALSA: hda/realtek: Add T560 docking unit fixup
  ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
  ALSA: hda/realtek - ALC256 speaker noise issue
  ALSA: hda - Fix headset mic detection problem for Dell machine
  ALSA: hda - Add PCI ID for Kabylake
  KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
  KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
  vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
  geneve: Relax MTU constraints
  vxlan: Relax MTU constraints
  ipv6: Skip XFRM lookup if dst_entry in socket cache is valid
  l2tp: fix configuration passed to setup_udp_tunnel_sock()
  bridge: Don't insert unnecessary local fdb entry on changing mac address
  tcp: record TLP and ER timer stats in v6 stats
  vxlan: Accept user specified MTU value when create new vxlan link
  team: don't call netdev_change_features under team->lock
  sfc: on MC reset, clear PIO buffer linkage in TXQs
  bpf, inode: disallow userns mounts
  uapi glibc compat: fix compilation when !__USE_MISC in glibc
  udp: prevent skbs lingering in tunnel socket queues
  bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
  tuntap: correctly wake up process during uninit
  switchdev: pass pointer to fib_info instead of copy
  tipc: fix nametable publication field in nl compat
  netlink: Fix dump skb leak/double free
  tipc: check nl sock before parsing nested attributes
  scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
  scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
  cs-etm: associating output packet with CPU they executed on
  cs-etm: removing unecessary structure field
  cs-etm: account for each trace buffer in the queue
  cs-etm: avoid casting variable
  perf tools: fixing Makefile problems
  perf tools: new naming convention for openCSD
  perf scripts: Add python scripts for CoreSight traces
  perf tools: decoding capailitity for CoreSight traces
  perf symbols: Check before overwriting build_id
  perf tools: pushing driver configuration down to the kernel
  perf tools: add infrastructure for PMU specific configuration
  coresight: etm-perf: incorporating sink definition from the cmd line
  coresight: adding sink parameter to function coresight_build_path()
  perf: passing struct perf_event to function setup_aux()
  perf/core: adding PMU driver specific configuration
  perf tools: adding coresight etm PMU record capabilities
  perf tools: making coresight PMU listable
  coresight: tmc: implementing TMC-ETR AUX space API
  coresight: Add support for Juno platform
  coresight: Handle build path error
  coresight: Fix erroneous memset in tmc_read_unprepare_etr
  coresight: Fix tmc_read_unprepare_etr
  coresight: Fix NULL pointer dereference in _coresight_build_path
  ANDROID: dm verity fec: add missing release from fec_ktype
  ANDROID: dm verity fec: limit error correction recursion
  ANDROID: restrict access to perf events
  FROMLIST: security,perf: Allow further restriction of perf_event_open
  BACKPORT: perf tools: Document the perf sysctls
  Revert "armv6 dcc tty driver"
  Revert "arm: dcc_tty: fix armv6 dcc tty build failure"
  ARM64: Ignore Image-dtb from git point of view
  arm64: add option to build Image-dtb
  ANDROID: usb: gadget: f_midi: set fi->f to NULL when free f_midi function
  Linux 4.4.13
  xfs: handle dquot buffer readahead in log recovery correctly
  xfs: print name of verifier if it fails
  xfs: skip stale inodes in xfs_iflush_cluster
  xfs: fix inode validity check in xfs_iflush_cluster
  xfs: xfs_iflush_cluster fails to abort on error
  xfs: Don't wrap growfs AGFL indexes
  xfs: disallow rw remount on fs with unknown ro-compat features
  gcov: disable tree-loop-im to reduce stack usage
  scripts/package/Makefile: rpmbuild add support of RPMOPTS
  dma-debug: avoid spinlock recursion when disabling dma-debug
  PM / sleep: Handle failures in device_suspend_late() consistently
  ext4: silence UBSAN in ext4_mb_init()
  ext4: address UBSAN warning in mb_find_order_for_block()
  ext4: fix oops on corrupted filesystem
  ext4: clean up error handling when orphan list is corrupted
  ext4: fix hang when processing corrupted orphaned inode list
  drm/imx: Match imx-ipuv3-crtc components using device node in platform data
  drm/i915: Don't leave old junk in ilk active watermarks on readout
  drm/atomic: Verify connector->funcs != NULL when clearing states
  drm/fb_helper: Fix references to dev->mode_config.num_connector
  drm/i915/fbdev: Fix num_connector references in intel_fb_initial_config()
  drm/amdgpu: Fix hdmi deep color support.
  drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefresh
  drm/vmwgfx: Fix order of operation
  drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
  drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
  drm/gma500: Fix possible out of bounds read
  sunrpc: fix stripping of padded MIC tokens
  xen: use same main loop for counting and remapping pages
  xen/events: Don't move disabled irqs
  powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
  Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
  powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
  powerpc/book3s64: Fix branching to OOL handlers in relocatable kernel
  pipe: limit the per-user amount of pages allocated in pipes
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  wait/ptrace: assume __WALL if the child is traced
  mm: use phys_addr_t for reserve_bootmem_region() arguments
  media: v4l2-compat-ioctl32: fix missing reserved field copy in put_v4l2_create32
  PCI: Disable all BAR sizing for devices with non-compliant BARs
  pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range
  clk: bcm2835: divider value has to be 1 or more
  clk: bcm2835: pll_off should only update CM_PLL_ANARST
  clk: at91: fix check of clk_register() returned value
  clk: bcm2835: Fix PLL poweron
  cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
  cpuidle: Indicate when a device has been unregistered
  PM / Runtime: Fix error path in pm_runtime_force_resume()
  mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly
  mfd: intel-lpss: Save register context on suspend
  hwmon: (ads7828) Enable internal reference
  aacraid: Fix for KDUMP driver hang
  aacraid: Fix for aac_command_thread hang
  aacraid: Relinquish CPU during timeout wait
  rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring
  rtlwifi: Fix logic error in enter/exit power-save mode
  rtlwifi: btcoexist: Implement antenna selection
  rtlwifi: rtl8723be: Add antenna select module parameter
  hwrng: exynos - Fix unbalanced PM runtime put on timeout error path
  ath5k: Change led pin configuration for compaq c700 laptop
  ath10k: fix kernel panic, move arvifs list head init before htt init
  ath10k: fix rx_channel during hw reconfigure
  ath10k: fix firmware assert in monitor mode
  ath10k: fix debugfs pktlog_filter write
  ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
  ath9k: Add a module parameter to invert LED polarity.
  ARM: dts: imx35: restore existing used clock enumeration
  ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description
  ARM: mvebu: fix GPIO config on the Linksys boards
  Input: uinput - handle compat ioctl for UI_SET_PHYS
  ASoC: ak4642: Enable cache usage to fix crashes on resume
  affs: fix remount failure when there are no options changed
  MIPS: VDSO: Build with `-fno-strict-aliasing'
  MIPS: lib: Mark intrinsics notrace
  MIPS: Build microMIPS VDSO for microMIPS kernels
  MIPS: Fix sigreturn via VDSO on microMIPS kernel
  MIPS: ptrace: Prevent writes to read-only FCSR bits
  MIPS: ptrace: Fix FP context restoration FCSR regression
  MIPS: Disable preemption during prctl(PR_SET_FP_MODE, ...)
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: Fix MSA ld_*/st_* asm macros to use PTR_ADDU
  MIPS: Use copy_s.fmt rather than copy_u.fmt
  MIPS: Loongson-3: Reserve 32MB for RS780E integrated GPU
  MIPS: Reserve nosave data for hibernation
  MIPS: ath79: make bootconsole wait for both THRE and TEMT
  MIPS: Sync icache & dcache in set_pte_at
  MIPS: Handle highmem pages in __update_cache
  MIPS: Flush highmem pages in __flush_dcache_page
  MIPS: Fix watchpoint restoration
  MIPS: Fix uapi include in exported asm/siginfo.h
  MIPS: Fix siginfo.h to use strict posix types
  MIPS: Avoid using unwind_stack() with usermode
  MIPS: Don't unwind to user mode with EVA
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: math-emu: Fix jalr emulation when rd == $0
  MIPS64: R6: R2 emulation bugfix
  coresight: etb10: adjust read pointer only when needed
  coresight: configuring ETF in FIFO mode when acting as link
  coresight: tmc: implementing TMC-ETF AUX space API
  coresight: moving struct cs_buffers to header file
  coresight: tmc: keep track of memory width
  coresight: tmc: make sysFS and Perf mode mutually exclusive
  coresight: tmc: dump system memory content only when needed
  coresight: tmc: adding mode of operation for link/sinks
  coresight: tmc: getting rid of multiple read access
  coresight: tmc: allocating memory when needed
  coresight: tmc: making prepare/unprepare functions generic
  coresight: tmc: splitting driver in ETB/ETF and ETR components
  coresight: tmc: cleaning up header file
  coresight: tmc: introducing new header file
  coresight: tmc: clearly define number of transfers per burst
  coresight: tmc: re-implementing tmc_read_prepare/unprepare() functions
  coresight: tmc: waiting for TMCReady bit before programming
  coresight: tmc: modifying naming convention
  coresight: tmc: adding sysFS management entries
  coresight: etm4x: add tracer ID for A72 Maia processor.
  coresight: etb10: fixing the right amount of words to read
  coresight: stm: adding driver for CoreSight STM component
  coresight: adding path for STM device
  coresight: etm4x: modify q_support type
  coresight: no need to do the forced type conversion
  coresight: removing gratuitous boot time log messages
  coresight: etb10: splitting sysFS "status" entry
  coresight: moving coresight_simple_func() to header file
  coresight: etm4x: implementing the perf PMU API
  coresight: etm4x: implementing user/kernel mode tracing
  coresight: etm4x: moving etm_drvdata::enable to atomic field
  coresight: etm4x: unlocking tracers in default arch init
  coresight: etm4x: splitting etmv4 default configuration
  coresight: etm4x: splitting struct etmv4_drvdata
  coresight: etm4x: adding config and traceid registers
  coresight: etm4x: moving sysFS entries to a dedicated file
  stm class: Support devices that override software assigned masters
  stm class: Remove unnecessary pointer increment
  stm class: Fix stm device initialization order
  stm class: Do not leak the chrdev in error path
  stm class: Remove a pointless line
  stm class: stm_heartbeat: Make nr_devs parameter read-only
  stm class: dummy_stm: Make nr_dummies parameter read-only
  MAINTAINERS: Add a git tree for the stm class
  perf/ring_buffer: Document AUX API usage
  perf/core: Free AUX pages in unmap path
  perf/ring_buffer: Refuse to begin AUX transaction after rb->aux_mmap_count drops
  perf auxtrace: Add perf_evlist pointer to *info_priv_size()
  perf session: Simplify tool stubs
  perf inject: Hit all DSOs for AUX data in JIT and other cases
  perf tools: tracepoint_error() can receive e=NULL, robustify it
  perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
  perf evsel: Introduce disable() method
  perf cpumap: Auto initialize cpu__max_{node,cpu}
  drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
  drivers/hwtracing: make coresight-* explicitly non-modular
  coresight: introducing a global trace ID function
  coresight: etm-perf: new PMU driver for ETM tracers
  coresight: etb10: implementing AUX API
  coresight: etb10: adding operation mode for sink->enable()
  coresight: etb10: moving to local atomic operations
  coresight: etm3x: implementing perf_enable/disable() API
  coresight: etm3x: implementing user/kernel mode tracing
  coresight: etm3x: consolidating initial config
  coresight: etm3x: changing default trace configuration
  coresight: etm3x: set progbit to stop trace collection
  coresight: etm3x: adding operation mode for etm_enable()
  coresight: etm3x: splitting struct etm_drvdata
  coresight: etm3x: unlocking tracers in default arch init
  coresight: etm3x: moving sysFS entries to dedicated file
  coresight: etm3x: moving etm_readl/writel to header file
  coresight: moving PM runtime operations to core framework
  coresight: add API to get sink from path
  coresight: associating path with session rather than tracer
  coresight: etm4x: Check every parameter used by dma_xx_coherent.
  coresight: "DEVICE_ATTR_RO" should defined as static.
  coresight: implementing 'cpu_id()' API
  coresight: removing bind/unbind options from sysfs
  coresight: remove csdev's link from topology
  coresight: release reference taken by 'bus_find_device()'
  coresight: coresight_unregister() function cleanup
  coresight: fixing lockdep error
  coresight: fixing indentation problem
  coresight: Fix a typo in Kconfig
  coresight: checking for NULL string in coresight_name_match()
  perf/core: Disable the event on a truncated AUX record
  perf/core: Don't leak event in the syscall error path
  perf/core: Fix perf_sched_count derailment
  stm class: dummy_stm: Add link callback for fault injection
  stm class: Plug stm device's unlink callback
  stm class: Fix a race in unlinking
  stm class: Fix unbalanced module/device refcounting
  stm class: Guard output assignment against concurrency
  stm class: Fix unlocking braino in the error path
  stm class: Add heartbeat stm source device
  stm class: dummy_stm: Create multiple devices
  stm class: Support devices with multiple instances
  stm class: Use driver's packet callback return value
  stm class: Prevent user-controllable allocations
  stm class: Fix link list locking
  stm class: Fix locking in unbinding policy path
  stm class: Select CONFIG_SRCU
  stm class: Hide STM-specific options if STM is disabled
  perf: Synchronously free aux pages in case of allocation failure
  Linux 4.4.12
  kbuild: move -Wunused-const-variable to W=1 warning level
  Revert "scsi: fix soft lockup in scsi_remove_target() on module removal"
  scsi: Add intermediate STARGET_REMOVE state to scsi_target_state
  hpfs: implement the show_options method
  hpfs: fix remount failure when there are no options changed
  UBI: Fix static volume checks when Fastmap is used
  SIGNAL: Move generic copy_siginfo() to signal.h
  thunderbolt: Fix double free of drom buffer
  IB/srp: Fix a debug kernel crash
  ALSA: hda - Fix headset mic detection problem for one Dell machine
  ALSA: hda/realtek - Add support for ALC295/ALC3254
  ALSA: hda - Fix headphone noise on Dell XPS 13 9360
  ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294
  mcb: Fixed bar number assignment for the gdd
  clk: bcm2835: add locking to pll*_on/off methods
  locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()
  serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  serial: 8250_mid: recognize interrupt source in handler
  serial: 8250_mid: use proper bar for DNV platform
  serial: 8250_pci: fix divide error bug if baud rate is 0
  Fix OpenSSH pty regression on close
  tty/serial: atmel: fix hardware handshake selection
  TTY: n_gsm, fix false positive WARN_ON
  tty: vt, return error when con_startup fails
  xen/x86: actually allocate legacy interrupts on PV guests
  KVM: x86: mask CPUID(0xD,0x1).EAX against host value
  MIPS: KVM: Fix timer IRQ race when writing CP0_Compare
  MIPS: KVM: Fix timer IRQ race when freezing timer
  KVM: x86: fix ordering of cr0 initialization code in vmx_cpu_reset
  KVM: MTRR: remove MSR 0x2f8
  staging: comedi: das1800: fix possible NULL dereference
  usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request()
  USB: leave LPM alone if possible when binding/unbinding interface drivers
  usb: misc: usbtest: fix pattern tests for scatterlists.
  usb: f_mass_storage: test whether thread is running before starting another
  usb: gadget: f_fs: Fix EFAULT generation for async read operations
  USB: serial: option: add even more ZTE device ids
  USB: serial: option: add more ZTE device ids
  USB: serial: option: add support for Cinterion PH8 and AHxx
  USB: serial: io_edgeport: fix memory leaks in probe error path
  USB: serial: io_edgeport: fix memory leaks in attach error path
  USB: serial: quatech2: fix use-after-free in probe error path
  USB: serial: keyspan: fix use-after-free in probe error path
  USB: serial: mxuport: fix use-after-free in probe error path
  mei: bus: call mei_cl_read_start under device lock
  mei: amthif: discard not read messages
  mei: fix NULL dereferencing during FW initiated disconnection
  Bluetooth: vhci: Fix race at creating hci device
  Bluetooth: vhci: purge unhandled skbs
  Bluetooth: vhci: fix open_timeout vs. hdev race
  mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
  mmc: longer timeout for long read time quirk
  dell-rbtn: Ignore ACPI notifications if device is suspended
  ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings
  mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
  mmc: mmc: Fix partition switch timeout for some eMMCs
  can: fix handling of unmodifiable configuration options
  irqchip/gic-v3: Configure all interrupts as non-secure Group-1
  irqchip/gic: Ensure ordering between read of INTACK and shared data
  Input: pwm-beeper - fix - scheduling while atomic
  mfd: omap-usb-tll: Fix scheduling while atomic BUG
  sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
  clk: qcom: msm8916: Fix crypto clock flags
  crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}
  crypto: talitos - fix ahash algorithms registration
  crypto: caam - fix caam_jr_alloc() ret code
  ring-buffer: Prevent overflow of size in ring_buffer_resize()
  ring-buffer: Use long for nr_pages to avoid overflow failures
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication
  fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication
  fs/cifs: correctly to anonymous authentication for the LANMAN authentication
  fs/cifs: correctly to anonymous authentication via NTLMSSP
  remove directory incorrectly tries to set delete on close on non-empty directories
  kvm: arm64: Fix EC field in inject_abt64
  arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables
  arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str
  arm64: Implement pmdp_set_access_flags() for hardware AF/DBM
  arm64: Implement ptep_set_access_flags() for hardware AF/DBM
  arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
  arm64: Fix typo in the pmdp_huge_get_and_clear() definition
  ext4: iterate over buffer heads correctly in move_extent_per_page()
  perf test: Fix build of BPF and LLVM on older glibc libraries
  perf/core: Fix perf_event_open() vs. execve() race
  perf/x86/intel/pt: Generate PMI in the STOP region as well
  Btrfs: don't use src fd for printk
  UPSTREAM: mac80211: fix "warning: ‘target_metric’ may be used uninitialized"
  Revert "drivers: power: use 'current' instead of 'get_current()'"
  cpufreq: interactive: drop cpufreq_{get,put}_global_kobject func calls
  Revert "cpufreq: interactive: build fixes for 4.4"
  xt_qtaguid: Fix panic caused by processing non-full socket.
  fiq_debugger: Add fiq_debugger.disable option
  UPSTREAM: procfs: fixes pthread cross-thread naming if !PR_DUMPABLE
  FROMLIST: wlcore: Disable filtering in AP role
  Revert "drivers: power: Add watchdog timer to catch drivers which lockup during suspend."
  fiq_debugger: Add option to apply uart overlay by FIQ_DEBUGGER_UART_OVERLAY
  Revert "Recreate asm/mach/mmc.h include file"
  Revert "ARM: Add 'card_present' state to mmc_platfrom_data"
  usb: dual-role: make stub functions inline
  Revert "mmc: Add status IRQ and status callback function to mmc platform data"
  quick selinux support for tracefs
  Revert "hid-multitouch: Filter collections by application usage."
  Revert "HID: steelseries: validate output report details"
  xt_qtaguid: Fix panic caused by synack processing
  Revert "mm: vmscan: Add a debug file for shrinkers"
  Revert "SELinux: Enable setting security contexts on rootfs inodes."
  Revert "SELinux: build fix for 4.1"
  fuse: Add support for d_canonical_path
  vfs: change d_canonical_path to take two paths
  android: recommended.cfg: remove CONFIG_UID_STAT
  netfilter: xt_qtaguid: seq_printf fixes
  Revert "misc: uidstat: Adding uid stat driver to collect network statistics."
  Revert "net: activity_stats: Add statistics for network transmission activity"
  Revert "net: activity_stats: Stop using obsolete create_proc_read_entry api"
  Revert "misc: uidstat: avoid create_stat() race and blockage."
  Revert "misc: uidstat: Remove use of obsolete create_proc_read_entry api"
  Revert "misc seq_printf fixes for 4.4"
  Revert "misc: uid_stat: Include linux/atomic.h instead of asm/atomic.h"
  Revert "net: socket ioctl to reset connections matching local address"
  Revert "net: fix iterating over hashtable in tcp_nuke_addr()"
  Revert "net: fix crash in tcp_nuke_addr()"
  Revert "Don't kill IPv4 sockets when killing IPv6 sockets was requested."
  Revert "tcp: Fix IPV6 module build errors"
  android: base-cfg: remove CONFIG_SWITCH
  Revert "switch: switch class and GPIO drivers."
  Revert "drivers: switch: remove S_IWUSR from dev_attr"
  ANDROID: base-cfg: enable CONFIG_IP_NF_NAT
  BACKPORT: selinux: restrict kernel module loading
  android: base-cfg: enable CONFIG_QUOTA

Conflicts:
	Documentation/sysctl/kernel.txt
	drivers/cpufreq/cpufreq_interactive.c
	drivers/hwtracing/coresight/Kconfig
	drivers/hwtracing/coresight/Makefile
	drivers/hwtracing/coresight/coresight-etm4x.c
	drivers/hwtracing/coresight/coresight-etm4x.h
	drivers/hwtracing/coresight/coresight-priv.h
	drivers/hwtracing/coresight/coresight-stm.c
	drivers/hwtracing/coresight/coresight-tmc.c
	drivers/mmc/core/core.c
	include/linux/coresight-stm.h
	include/linux/coresight.h
	include/linux/msm_mdp.h
	include/uapi/linux/coresight-stm.h
	kernel/events/core.c
	kernel/sched/fair.c
	net/Makefile
	net/ipv4/netfilter/arp_tables.c
	net/ipv4/netfilter/ip_tables.c
	net/ipv4/tcp.c
	net/ipv6/netfilter/ip6_tables.c
	net/netfilter/xt_quota2.c
	sound/core/pcm.c

Change-Id: I17aa0002815014e9bddc47e67769a53c15768a99
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
2016-10-28 10:48:35 -07:00
Alex Shi
9ad8208bd7 Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android 2016-06-14 17:08:03 +08:00
Philipp Zabel
137bd12493 drm/imx: Match imx-ipuv3-crtc components using device node in platform data
commit 310944d148e3600dcff8b346bee7fa01d34903b1 upstream.

The component master driver imx-drm-core matches component devices using
their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc
module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during
probing. Before that, of_node was set and caused an of: modalias to be
used instead of the platform: modalias, which broke module autoloading.

On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc
probe function calls component_add, component matching in imx-drm-core
fails. While dev->of_node will be set once the next component tries to
bring up the component master, imx-drm-core component binding will never
succeed if one of the crtc devices is probed last.

Add of_node to the component platform data and match against the
pdata->of_node instead of dev->of_node in imx-drm-core to work around
this problem.

Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07 18:14:37 -07:00
Adrian Salido-Moreno
be23185307 Merge branch 'mdss-final-replay' into msm-4.4
This merge brings all display changes from msm-3.18 kernel

* (58 commits)
  msm: mdss: add support for additional DMA pipes
  msm: mdss: refactor device tree pipe parsing logic
  msm: mdss: refactor mixer configuration code
  msm: mdss: add support for secure display on msm8953.
  msm: mdss: disable ECG feature on 28nm PHY platform
  msm: mdss: send DSI command using TPG when in secure session
  msm: mdss: Update histogram and PA LUT in mdss V3
  msm: mdss: validate layer count before copying userdata
  msm: mdss: Fix potential NULL pointer dereferences
  Revert "msm: mdss: Remove redundant handoff pending check"
  msm: mdss: hdmi: Do not treat intermediate ddc error as failure
  msm: mdss: revisit igc pipe enumeration logic
  msm: mdss: Add PA support for mdss V3
  msm: mdss: Add support for mdss v3 ops
  msm: mdss: Update the postprocessing ops using mdss revision
  msm: mdss: update the caching payload based on mdss version
  msm: clk: hdmi: add support for atomic update
  msm: sde: Add v4l2 rotator driver to enable multi-context usecase
  msm: mdss: refactor pipe type checks
  msm: mdss: add proper layer zorder validation
  msm: mdss: stub bus scaling functions if driver is disabled
  msm: mdss: avoid failure if primary panel pref is not enabled
  msm: adv7533: add support for clients to read audio block
  msm: mdss: add lineptr interrupt support for command mode panels
  msm: mdss: update rotator frame rate in the pipe configuration
  mdss: msm: Avoid excessive failure logs in igc config
  msm: mdss: delay dma commands for split-dsi cmd mode panels
  msm: mdss: enable GDSC before enabling clocks in MDP3 probe
  mdss: dsi: turn off phy power supply during static screen
  mdss: dsi: read dsi and phy revision during dsi ctrl probe
  msm: mdss: Fix memory leak in MDP3 driver
  msm: mdss: delay overlay start until first update for external
  msm: mdss: free splash memory for MSM8909w after splash done
  msm: mdss: hdmi: separate audio from transmitter core
  msm: mdss: disable dsi burst mode when idle is enabled
  msm: mdss: remove invalid csc initialization during hw init
  msm: mdss: dsi: increase dsi error count only for valid errors
  msm: mdss: remove HIST LUT programming in mdss_hw_init
  msm: mdss: dsi: ignore error interrupt when mask not set
  msm: mdss: add support to configure bus scale vectors from dt
  msm: mdss: unstage the pipe if there is z_order mismatch
  msm: mdss: squash MDP3 driver changes and SMMU change
  msm: mdss: Read the bridge chip name and instance id from DTSI
  msm: mdss: Enable continuous splash on bridge chip
  msm: mdss: Fix multiple bridge chip usecase
  msm: mdss: Enable export of mdss interrupt to external driver
  msm: mdss: rotator: turn off rotator clock in wq release
  msm: mdss: fix ulps during suspend feature logic
  clk: msm: mdss: program correct divider for PLL configuration
  msm: mdss: fix DSI PHY timing configuration logic
  msm: mdss: hdmi: add support for hdmi simulation
  msm: mdss: handle race condition in pingpong done counter
  clk: qcom: mdss: calculate pixel clock for HDMI during handoff
  msm: mdss: ensure proper dynamic refresh programming for dual DSI
  msm: mdss: Add fps flag and update blit request version
  msm: mdss: initialize fb split values during fb probe
  mdss: mdp: fix rotator compat layer copy
  msm: mdss: handle DSI ctrl/PHY regulator control properly

CRs-Fixed: 1000197
Change-Id: I521519c8abe8eed6924e2fbe3e1a026126582b77
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
2016-04-12 15:49:34 -07:00
Vinu Deokaran
bc9586706d msm: dba: add additional audio configuration parameters
Add additional audio configuration parameters to the MSM
DBA(Display Bridge Abstraction) interface driver.

Change-Id: I7fef9b1a192a872c2e89dd9a7d6e942a1b77c6cb
Signed-off-by: Vinu Deokaran <vinud@codeaurora.org>
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
2016-03-23 21:14:49 -07:00
Sandeep Panda
f472340bf7 msm: mdss: separate out DBA and CEC functionality from DSI
Currently, DBA (Display Bridge Abstract) related functionality
is being used in DSI files. Carve out DBA related functionality
into a new file which serves as a utility module and can be used
by any MDSS driver.

Define CEC on/enable functions in DBA (Display Bridge Abstract) so that
clients can enable disable CEC based on other dependent CEC modules.
Separate out CEC abstract data with CEC driver data and initialize and
release corresponding modules properly.

Change-Id: I84f53d99547dcd4ce0b8275401b03ed8e96e14d5
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
2016-03-23 21:14:27 -07:00
Ajay Singh Parmar
2ff2acc7cf msm: dba: define null function to register client
All clients need to call register API exposed by DBA module to check
if the down stream transmitter driver is configured or not. In case
DBA is not enabled, define a null register function which returns
a NULL pointer to let the clients know of non availability of DBA.

Change-Id: I2b6066babe5a7e464a31752720da8f299997e977
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Siddharth Zaveri <szaveri@codeaurora.org>
2016-03-23 20:47:07 -07:00
Vinu Deokaran
3d30cc8dde msm: add display bridge abstraction driver
Add display bridge abstraction driver to provide an abstract interface
for different types of bridge chips used on MSM platforms. This
interface allows driver development for bridge chips from different
manufactorers while allowing users, of the funcationality provided by
these bridge chips, to re-use the same code across different boards.

Change-Id: I64457e3a44479a3b1be5482691d4727a86dc9b87
Signed-off-by: Vinu Deokaran <vinud@codeaurora.org>
Signed-off-by: Siddharth Zaveri <szaveri@codeaurora.org>
[cip@codeaurora.org: Moved file locations]
Signed-off-by: Clarence Ip <cip@codeaurora.org>
2016-03-23 20:47:05 -07:00
Ajay Singh Parmar
b32a8b2e78 mdss: hdmi: HDCP Topology
This change provides a mechanism to communicate with HDCP manager
to share the downstream KSVs to upstream HDMI devices.

Change-Id: Ib0d772d157af65b2f35c9b7e7cebe8d0e1670735
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
2016-03-23 20:20:20 -07:00
Greg Hackmann
efc4bbe21c video: adf: fbdev: add stubs for kernels without ADF_FBDEV
Change-Id: I42e087cddc29f6b93749791606e80dbd3e6f59ce
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:22 -08:00
Greg Hackmann
69094222cf video: adf: add buffer padding quirk
Quirks specify common behaviors that vary slightly among devices, and
which ADF must account for.

The buffer padding quirk captures the way different devices fetch the
last scanline in a buffer: some devices fetch an entire line (including
padding to the pitch) while others only fetch up to the visible width.
ADF's buffer size validation now takes this quirk into account.

Change-Id: I828b13316e27621d8a9efd9d5fffa6ce12a525ff
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:20 -08:00
Greg Hackmann
41bda719aa video: adf: replace fbdev helper's open flag with refcount
A device's fb_info is shared between clients.  fb_release() is called
when each client is released, not just the last one.  Since the fbdev
helper needs to release its dma-buf when the last client goes away, it
must keep its own reference count.

fbmem and fbcon hold different locks while calling fb_release(), so
explicit locking is needed.

Change-Id: I42cd659f7633adba7c11f407d4b594bd43305d6a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:19 -08:00
Greg Hackmann
3d46874e09 video: adf: expose adf_modeinfo_set_{name,vrefresh} to drivers
Change-Id: Id9f8b2184927a77b244ce0b33d619d6e44a0f17a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:14 -08:00
Greg Hackmann
1f9e414c3a video: adf: add helpers for validating custom formats
Many custom formats look a lot like the standard ones, but with
different subsampling, bpp, etc.  Expose and document
adf_buffer_validate()'s main body, so drivers can reuse its logic when
validating these formats.

Change-Id: I1d06981c9e5aab26f3ab2956c08c679f2c823bcc
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:12 -08:00
Greg Hackmann
e45fc30f3e video: adf: add informational flags to interfaces
Informational flags don't affect ADF directly but may be useful to
clients.  Currently used to indicate primary and external displays.

Change-Id: I343c7f0148da0869244c8e818350e9855525df85
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:12 -08:00
Greg Hackmann
4b3bd37bd9 video: adf: add fbdev compatibility helper
Change-Id: I2b82bb625f805e8edb27799743b290dda5befb97
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:11 -08:00
Greg Hackmann
8bb154db8a video: adf: add supported formats to adf_overlay_engine_data
Change-Id: If2aa783b9ece60160f465bf697508fc58682e1bc
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:11 -08:00
Greg Hackmann
68ff076002 video: adf: support "simple" buffers
Simple buffers are linear RGB buffers analogous to KMS's dumb buffers.
Simple buffers can be allocated and posted to a display interface
without any driver-private data.

Internally, ADF drivers provide the driver-private data needed (if any)
to post a simple buffer to the display.

Change-Id: Ib0b737622eaf343111310f6623f99d69cf3807d2
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:10 -08:00
Greg Hackmann
3300bf4329 video: adf: add memblock helper
Provides a dma-buf exporter for memblocks, mainly useful for ADF devices
to wrap their bootloader logos

Change-Id: I936a9b5df099ab6084d433fcaf50f3bc29f93289
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:10 -08:00
Greg Hackmann
066a50cee5 video: add atomic display framework
Change-Id: I693257e269a99012cd0dbb57576ac222869cf4c7
Signed-off-by: Greg Hackmann <ghackmann@google.com>
2016-02-16 13:53:09 -08:00
Philipp Zabel
c3ede03c88 gpu: ipu-v3: drop unused dmfc field from client platform data
This field is never used, drop it.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-24 11:30:15 +01:00
Andrzej Hajda
b8182832c5 drm/exynos/decon5433: add support for DECON-TV
DECON-TV IP is responsible for generating video stream which is transferred
to HDMI IP. It is almost fully compatible with DECON IP.

The patch is based on initial work of Hyungwon Hwang.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Linus Torvalds
12f03ee606 libnvdimm for 4.3:
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
    mechanism for adding device-driver-discovered memory regions to the
    kernel's direct map.  This facility is used by the pmem driver to
    enable pfn_to_page() operations on the page frames returned by DAX
    ('direct_access' in 'struct block_device_operations'). For now, the
    'memmap' allocation for these "device" pages comes from "System
    RAM".  Support for allocating the memmap from device memory will
    arrive in a later kernel.
 
 2/ Introduce memremap() to replace usages of ioremap_cache() and
    ioremap_wt().  memremap() drops the __iomem annotation for these
    mappings to memory that do not have i/o side effects.  The
    replacement of ioremap_cache() with memremap() is limited to the
    pmem driver to ease merging the api change in v4.3.  Completion of
    the conversion is targeted for v4.4.
 
 3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
    driver, update the VFS DAX implementation and PMEM api to provide
    persistence guarantees for kernel operations on a DAX mapping.
 
 4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
    cacheable to improve performance.
 
 5/ Miscellaneous updates and fixes to libnvdimm including support
    for issuing "address range scrub" commands, clarifying the optimal
    'sector size' of pmem devices, a clarification of the usage of the
    ACPI '_STA' (status) property for DIMM devices, and other minor
    fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
 JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
 OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
 nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
 NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
 zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
 1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
 sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
 bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
 o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
 dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
 slsw6DkrWT60CRE42nbK
 =o57/
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This update has successfully completed a 0day-kbuild run and has
  appeared in a linux-next release.  The changes outside of the typical
  drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
  removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
  the introduction of ZONE_DEVICE + devm_memremap_pages().

  Summary:

   - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
     mechanism for adding device-driver-discovered memory regions to the
     kernel's direct map.

     This facility is used by the pmem driver to enable pfn_to_page()
     operations on the page frames returned by DAX ('direct_access' in
     'struct block_device_operations').

     For now, the 'memmap' allocation for these "device" pages comes
     from "System RAM".  Support for allocating the memmap from device
     memory will arrive in a later kernel.

   - Introduce memremap() to replace usages of ioremap_cache() and
     ioremap_wt().  memremap() drops the __iomem annotation for these
     mappings to memory that do not have i/o side effects.  The
     replacement of ioremap_cache() with memremap() is limited to the
     pmem driver to ease merging the api change in v4.3.

     Completion of the conversion is targeted for v4.4.

   - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
     driver, update the VFS DAX implementation and PMEM api to provide
     persistence guarantees for kernel operations on a DAX mapping.

   - Convert the ACPI NFIT 'BLK' driver to map the block apertures as
     cacheable to improve performance.

   - Miscellaneous updates and fixes to libnvdimm including support for
     issuing "address range scrub" commands, clarifying the optimal
     'sector size' of pmem devices, a clarification of the usage of the
     ACPI '_STA' (status) property for DIMM devices, and other minor
     fixes"

* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
  libnvdimm, pmem: direct map legacy pmem by default
  libnvdimm, pmem: 'struct page' for pmem
  libnvdimm, pfn: 'struct page' provider infrastructure
  x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
  add devm_memremap_pages
  mm: ZONE_DEVICE for "device memory"
  mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
  dax: drop size parameter to ->direct_access()
  nd_blk: change aperture mapping from WC to WB
  nvdimm: change to use generic kvfree()
  pmem, dax: have direct_access use __pmem annotation
  dax: update I/O path to do proper PMEM flushing
  pmem: add copy_from_iter_pmem() and clear_pmem()
  pmem, x86: clean up conditional pmem includes
  pmem: remove layer when calling arch_has_wmb_pmem()
  pmem, x86: move x86 PMEM API to new pmem.h header
  libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
  pmem: switch to devm_ allocations
  devres: add devm_memremap
  libnvdimm, btt: write and validate parent_uuid
  ...
2015-09-08 14:35:59 -07:00
Linus Torvalds
f377ea88b8 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm for 4.3.  Nouveau is
  probably the biggest amount of changes in here, since it missed 4.2.
  Highlights below, along with the usual bunch of fixes.

  All stuff outside drm should have applicable acks.

  Highlights:

   - new drivers:
        freescale dcu kms driver

   - core:
        more atomic fixes
        disable some dri1 interfaces on kms drivers
        drop fb panic handling, this was just getting more broken, as more locking was required.
        new core fbdev Kconfig support - instead of each driver enable/disabling it
        struct_mutex cleanups

   - panel:
        more new panels
        cleanup Kconfig

   - i915:
        Skylake support enabled by default
        legacy modesetting using atomic infrastructure
        Skylake fixes
        GEN9 workarounds

   - amdgpu:
        Fiji support
        CGS support for amdgpu
        Initial GPU scheduler - off by default
        Lots of bug fixes and optimisations.

   - radeon:
        DP fixes
        misc fixes

   - amdkfd:
        Add Carrizo support for amdkfd using amdgpu.

   - nouveau:
        long pending cleanup to complete driver,
        fully bisectable which makes it larger,
        perfmon work
        more reclocking improvements
        maxwell displayport fixes

   - vmwgfx:
        new DX device support, supports OpenGL 3.3
        screen targets support

   - mgag200:
        G200eW support
        G200e new revision support

   - msm:
        dragonboard 410c support, msm8x94 support, msm8x74v1 support
        yuv format support
        dma plane support
        mdp5 rotation
        initial hdcp

   - sti:
        atomic support

   - exynos:
        lots of cleanups
        atomic modesetting/pageflipping support
        render node support

   - tegra:
        tegra210 support (dc, dsi, dp/hdmi)
        dpms with atomic modesetting support

   - atmel:
        support for 3 more atmel SoCs
        new input formats, PRIME support.

   - dwhdmi:
        preparing to add audio support

   - rockchip:
        yuv plane support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  ...
2015-09-04 15:49:32 -07:00
Gustavo Padovan
4420508375 drm/exynos: add macro to get the address of START_S reg
This macro is need to get the value of the START shadow register, that
will tell if an framebuffer is currently displayed on the screen or not.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31 00:27:37 +09:00
Luis R. Rodriguez
9e517ac88b drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()
Convert the driver from using the x86-specific MTRR code to the
architecture-agnostic arch_phys_wc_add(). It will avoid MTRR if
write-combining is available, in order to take advantage of that
also ensure the ioremapped area is requested as write-combining.

There are a few motivations for this:

a) Take advantage of PAT when available

b) Help bury MTRR code away, MTRR is architecture-specific and on
   x86 it is being replaced by PAT.

c) Help with the goal of eventually using _PAGE_CACHE_UC over
   _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
   de33c442e titled "x86 PAT: fix performance drop for glx,
   use UC minus for ioremap(), ioremap_nocache() and
   pci_mmap_page_range()")

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the ifdeffery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get an
MTRR.

@ mtrr_found @
expression index, base, size;
@@

-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);

@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@

-mtrr_del(index, base, size);
+arch_phys_wc_del(index);

@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@

-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);

@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@

-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);

@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);

@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: dan.j.williams@intel.com
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: mst@redhat.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1440443613-13696-4-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-25 09:59:44 +02:00
Dan Williams
2584cf8357 arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt,
and ioremap_cache, tree-wide.

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-10 23:07:05 -04:00
Linus Torvalds
099bfbfc7f Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.2.

  I've one other new driver from freescale on my radar, it's been posted
  and reviewed, I'd just like to get someone to give it a last look, so
  maybe I'll send it or maybe I'll leave it.

  There is no major nouveau changes in here, Ben was working on
  something big, and we agreed it was a bit late, there wasn't anything
  else he considered urgent to merge.

  There might be another msm pull for some bits that are waiting on
  arm-soc, I'll see how we time it.

  This touches some "of" stuff, acks are in place except for the fixes
  to the build in various configs,t hat I just applied.

  Summary:

  New drivers:
      - virtio-gpu:
                KMS only pieces of driver for virtio-gpu in qemu.
                This is just the first part of this driver, enough to run
                unaccelerated userspace on. As qemu merges more we'll start
                adding the 3D features for the virgl 3d work.
      - amdgpu:
                a new driver from AMD to driver their newer GPUs. (VI+)
                It contains a new cleaner userspace API, and is a clean
                break from radeon moving forward, that AMD are going to
                concentrate on. It also contains a set of register headers
                auto generated from AMD internal database.

  core:
      - atomic modesetting API completed, enabled by default now.
      - Add support for mode_id blob to atomic ioctl to complete interface.
      - bunch of Displayport MST fixes
      - lots of misc fixes.

  panel:
      - new simple panels
      - fix some long-standing build issues with bridge drivers

  radeon:
      - VCE1 support
      - add a GPU reset counter for userspace
      - lots of fixes.

  amdkfd:
      - H/W debugger support module
      - static user-mode queues
      - support killing all the waves when a process terminates
      - use standard DECLARE_BITMAP

  i915:
      - Add Broxton support
      - S3, rotation support for Skylake
      - RPS booting tuning
      - CPT modeset sequence fixes
      - ns2501 dither support
      - enable cmd parser on haswell
      - cdclk handling fixes
      - gen8 dynamic pte allocation
      - lots of atomic conversion work

  exynos:
      - Add atomic modesetting support
      - Add iommu support
      - Consolidate drm driver initialization
      - and MIC, DECON and MIPI-DSI support for exynos5433

  omapdrm:
      - atomic modesetting support (fixes lots of things in rewrite)

  tegra:
      - DP aux transaction fixes
      - iommu support fix

  msm:
      - adreno a306 support
      - various dsi bits
      - various 64-bit fixes
      - NV12MT support

  rcar-du:
      - atomic and misc fixes

  sti:
      - fix HDMI timing complaince

  tilcdc:
      - use drm component API to access tda998x driver
      - fix module unloading

  qxl:
      - stability fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
  drm/nouveau: Pause between setting gpu to D3hot and cutting the power
  drm/dp/mst: close deadlock in connector destruction.
  drm: Always enable atomic API
  drm/vgem: Set unique to "vgem"
  of: fix a build error to of_graph_get_endpoint_by_regs function
  drm/dp/mst: take lock around looking up the branch device on hpd irq
  drm/dp/mst: make sure mst_primary mstb is valid in work function
  of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
  ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
  drm/atomic: Don't set crtc_state->enable manually
  drm/exynos: dsi: do not set TE GPIO direction by input
  drm/exynos: dsi: add support for MIC driver as a bridge
  drm/exynos: dsi: add support for Exynos5433
  drm/exynos: dsi: make use of array for clock access
  drm/exynos: dsi: make use of driver data for static values
  drm/exynos: dsi: add macros for register access
  drm/exynos: dsi: rename pll_clk to sclk_clk
  drm/exynos: mic: add MIC driver
  of: add helper for getting endpoint node of specific identifiers
  drm/exynos: add Exynos5433 decon driver
  ...
2015-06-26 13:18:51 -07:00
Joonyoung Shim
c8466a9166 drm/exynos: add Exynos5433 decon driver
DECON(Display and Enhancement Controller) is new IP replacing FIMD in
Exynos5433. This patch adds Exynos5433 decon driver.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22 19:56:44 +09:00
Luis R. Rodriguez
cc9866eb94 video: fbdev: tdfxfb: use arch_phys_wc_add() and ioremap_wc()
This driver uses the same area for MTRR as for the ioremap().
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.

There are a few motivations for this:

a) Take advantage of PAT when available

b) Help bury MTRR code away, MTRR is architecture specific and on
   x86 its replaced by PAT

c) Help with the goal of eventually using _PAGE_CACHE_UC over
   _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
   de33c442e titled "x86 PAT: fix performance drop for glx,
   use UC minus for ioremap(), ioremap_nocache() and
   pci_mmap_page_range()")

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.

@ mtrr_found @
expression index, base, size;
@@

-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);

@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@

-mtrr_del(index, base, size);
+arch_phys_wc_del(index);

@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@

-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);

@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@

-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);

@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);

@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);

Generated-by: Coccinelle SmPL
Cc: Rob Clark <robdclark@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-06-03 12:41:52 +03:00
Luis R. Rodriguez
f2081b81c5 video: fbdev: neofb: use arch_phys_wc_add() and ioremap_wc()
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.

There are a few motivations for this:

a) Take advantage of PAT when available

b) Help bury MTRR code away, MTRR is architecture specific and on
   x86 its replaced by PAT

c) Help with the goal of eventually using _PAGE_CACHE_UC over
   _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
   de33c442e titled "x86 PAT: fix performance drop for glx,
   use UC minus for ioremap(), ioremap_nocache() and
   pci_mmap_page_range()")

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.

@ mtrr_found @
expression index, base, size;
@@

-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);

@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@

-mtrr_del(index, base, size);
+arch_phys_wc_del(index);

@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@

-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);

@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@

-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);

@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);

@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);

Generated-by: Coccinelle SmPL
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-06-03 12:41:49 +03:00
Linus Torvalds
bf2ae5d337 fbdev changes for v4.1
* Small fixes and improvements to various fbdev drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNMTTAAoJEPo9qoy8lh71liwP/jC6NfKa0dPSHiif4JA9Q3CE
 ZTvjdxLwC0QjOu+BCFA4S1MvAabo7wzjeNTPU8OyY9fWbseowhEKPCC03iCu4+Bq
 1Cb/Jrll9Bo94OuvVERv1C6ipg2MdH303lgu4duSZRROinRTyXtwmAfEzm91pc9d
 XXLQT6L2eeGjzmNcQ7GtJuL/2NJpFA6cAs0xpj/Y+s+9b3Uzp+IWoi3EF9sfGWL6
 pNy2sJZgpDR+Wfqc47S2eKHfOGDVItCo70F2LXQmJABkwuiOI+YVG7eVUAwHO7Du
 PGBq8Rrv9ThIqAkI5p327HHEgJCn+bJZ86VR/9I1hhPM9PxbknFgq4wIL3bK6gu7
 rCsqn7kNbWIQ89I/iV18O0bglpZDbOx7fqMyzLMgaWUV+YrBSW6C541ChgSQIMN6
 aLDFCUDmNQF8FeCz4I4cmeH+dRm9J0qdmw/PxnGmgsUbi9HIGg6aSq1KXtbkrLvS
 CQvh4nB715K05tAYu/v7oHiuw5IPXFRs6SKm7ni/tbrGOLUckTzRuapvpzpYkkM3
 I/Sndqd/rLIRSZN3+j18E1wWbIGhssje6LJTe31cdF29XfWntZMoZjBYTrxHO3/W
 v+1iOIpre8pCDuXbBELlKhijH3Qpl3FnZw9h0UgXgc8HmIlKC2egYLEXlrnYAFhy
 stoGICf1I+Wgtwh86Da5
 =+Irm
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 "Small fixes and improvements to various fbdev drivers"

* tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (24 commits)
  omapdss: extend pm notifier to handle hibernation
  OMAPDSS: Correct video ports description file path in DT binding doc
  OMAPDSS: disable VT switch
  fbdev: sh_mobile_lcdc: Fix destruction of uninitialized mutex
  video: fbdev: sh_mobile_lcdcfb: Fix ROP3 sysfs attribute parsing
  fbdev: pm3fb: cleanup some confusing indenting
  hyperv: hyperv_fb: match wait_for_completion_timeout return type
  video: fbdev: use msecs_to_jiffies for time conversions
  fbdev: via/via_clock: fix sparse warning
  video: fbdev: make of_device_id array const
  fbdev: sm501fb: use memset_io
  OMAPDSS: workaround for MFLAG + NV12 issue
  OMAPDSS: Add support for MFLAG
  OMAPDSS: setup default fifo thresholds
  OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG
  OMAPDSS: DISPC: fix div by zero issue in overlay scaling
  OMAPDSS: DISPC: change sync_pclk_edge default value
  OMAPDSS: change signal_level & signal_edge enum values
  OMAPDSS: DISPC: explicit handling for sync and de levels
  OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES
  ...
2015-04-20 15:16:25 -07:00
Dave Airlie
1d2add28ed imx-drm changes to use media bus formats and LDB drm_panel support
- Add media bus formats needed by imx-drm
 - Switch to use media bus formats to describe the pixel format
   on the internal parallel bus between display interface and
   encoders
 - Some preparations for TV Output via TVEv2 on i.MX5
 - Add drm_panel support to the i.MX LVDS driver, allow to
   determine the bus pixel format from the panel descriptor.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVGnvrAAoJEFDCiBxwnmDrnXwP/RrkQjc9lluHJXJFN0gSE2vv
 +xKhZ4fPAkQECcHUFcSaL3mZiwQr2wym6kMR8j2ivj/EpJjfMsy91M+6yiwrMfyb
 Ccp6750LLljvQnUBayjHKMA55p9p+59wihFU26jCLzMB/30fJjqRtvQXwI3I4l2+
 ZKOaoeq+EubWfGKe3yVGqZB8p+DS4BvMwnXLrv2IF9ONRE7E24p6beKM1D5PFBPQ
 C5ZJ+BusMIyessgd7iNuIKJPkhZWjcgzSqfB3NiHxOB1FMCLpaGC8LcP/XKzqeQn
 cKBlAzxGhZucOshS217G6cK5C7ELTSEWP+CbFbIBOHyaiY0pVgW5AfKVUgPQK7+l
 50o8xQWQAZvzUIjGMPkhoELEW1mXmGDUksdae9rhr7/e6m/t8xBPvyxgMB70QEsL
 q0YL7XJzmLugTeSSABZBG/4GFfiOmaVP8ANUM9Kg6lOAVTS5NiVzlUrEukv4tppo
 VMQWBc8ot0woqZUlwlP1OJ2Z8lU2aT3px7BnZVu/VWIrNfJX5H9+Q4w57HqaYeqF
 lmuW9R/R/RulQiEVG36g91VYOsfE2bB7QlAums0jxTZu84fhy7BIOhdBzUdC+xO1
 yihgSkuNQPXvtIboIuUvQ/qc3G9fDlnlP78OfVdOn6uY+XSWAKiLs914xcQHphT/
 ZlVJkXAKk1WzKyVeghL2
 =nTVr
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm changes to use media bus formats and LDB drm_panel support

- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
  on the internal parallel bus between display interface and
  encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
  determine the bus pixel format from the panel descriptor.

* tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: imx-ldb: allow to determine bus format from the connected panel
  drm/imx: imx-ldb: reset display clock input when disabling LVDS
  drm/imx: imx-ldb: add drm_panel support
  drm/imx: consolidate bus format variable names
  drm/imx: switch to use media bus formats
  Add RGB666_1X24_CPADHI media bus format
  Add YUV8_1X24 media bus format
  Add BGR888_1X24 and GBR888_1X24 media bus formats
  Add LVDS RGB media bus formats
  Add RGB444_1X12 and RGB565_1X16 media bus formats
  drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2
  drm/imx: Add support for interlaced scanout
2015-04-13 17:28:57 +10:00
Krzysztof Kozlowski
1c363c7ccc drm/exynos: Enable DP clock to fix display on Exynos5250 and other
After adding display power domain for Exynos5250 in commit
2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250") the
display on Chromebook Snow and others stopped working after boot.

The reason for this suggested Andrzej Hajda: the DP clock was disabled.
This clock is required by Display Port and is enabled by bootloader.
However when FIMD driver probing was deferred, the display power domain
was turned off. This effectively reset the value of DP clock enable
register.

When exynos-dp is later probed, the clock is not enabled and display is
not properly configured:

exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok
exynos-dp 145b0000.dp-controller: unable to config video

Fixes: 2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250")
Cc: <stable@vger.kernel.org>

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13 11:39:42 +09:00
Gustavo Padovan
453b44a3f6 drm/exynos: fimd: fix alpha setting for XR24 pixel format
XR24 planes were not shown properly, so now set the right registers
to correctly enable displaying these planes.

It also moves the alpha register settings to fimd_win_set_pixfmt()
to keep all pixel format stuff together.

v2: remove leftover var alpha

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13 11:39:39 +09:00
Philipp Zabel
2872c8072a drm/imx: consolidate bus format variable names
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-03-31 11:59:34 +02:00
Tomi Valkeinen
7ad582be12 OMAPDSS: change signal_level & signal_edge enum values
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and
ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW.
The previous patch removed this dependency.

Swap the enum values the other way around. This doesn't change the
behavior in any way, but makes it easier to debug as value of '1' means
HIGH or RISING.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
7a16360d56 OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES
DISPC can drive data lines either on rising or falling pixel clock edge,
which can be configured by the user.

Sync lines can also be driven on rising or falling pixel clock edge, but
additionally the HW can be configured to drive the sync lines on
opposite clock edge from the data lines.

This opposite edge setting does not make any sense, as the same effect
can be achieved by just setting the sync lines to be driven on the other
edge compared to the data lines. It feels like some kind of backward
compatibility option, even if all DSS versions seem to have the same
implementation.

To simplify the code and configuration of the signals, and to make the
dispc timings more compatible with what is used on other platforms,
let's just remove the whole opposite-edge support.

The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are
changed so that they use the opposite setting from the data edge.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:11 +02:00
Tomi Valkeinen
a38bb793ea OMAPDSS: fix regression with display sysfs files
omapdss's sysfs directories for displays used to have 'name' file,
giving the name for the display. This file was later renamed to
'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like
at least xserver-xorg-video-omap3 requires the 'name' file to be
present.

To fix the regression, this patch creates new kobjects for each display,
allowing us to create sysfs directories for the displays. This way we
have the whole directory for omapdss, and there will be no sysfs file
clashes with the underlying display device's sysfs files.

We can thus add the 'name' sysfs file back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NeilBrown <neilb@suse.de>
2015-02-26 10:23:15 +02:00
Linus Torvalds
796e1c5571 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull, it has a shared branch with some alsa
  crossover but everything should be acked by relevant people.

  New drivers:
     - ATMEL HLCDC driver
     - designware HDMI core support (used in multiple SoCs).

  core:
     - lots more atomic modesetting work, properties and atomic ioctl
       (hidden under option)
     - bridge rework allows support for Samsung exynos chromebooks to
       work finally.
     - some more panels supported

  i915:
     - atomic plane update support
     - DSI uses shared DSI infrastructure
     - Skylake basic support is all merged now
     - component framework used for i915/snd-hda interactions
     - write-combine cpu memory mappings
     - engine init code refactored
     - full ppgtt enabled where execlists are enabled.
     - cherryview rps/gpu turbo and pipe CRC support.

  radeon:
     - indirect draw support for evergreen/cayman
     - SMC and manual fan control for SI/CI
     - Displayport audio support

  amdkfd:
     - SDMA usermode queue support
     - replace suballocator usage with more suitable one
     - rework for allowing interfacing to more than radeon

  nouveau:
     - major renaming in prep for later splitting work
     - merge arm platform driver into nouveau
     - GK20A reclocking support

  msm:
     - conversion to atomic modesetting
     - YUV support for mdp4/5
     - eDP support
     - hw cursor for mdp5

  tegra:
     - conversion to atomic modesetting
     - better suspend/resume support for child devices

  rcar-du:
     - interlaced support

  imx:
     - move to using dw_hdmi shared support
     - mode_fixup support

  sti:
     - DVO support
     - HDMI infoframe support

  exynos:
     - refactoring and cleanup, removed lots of internal unnecessary
       abstraction
     - exynos7 DECON display controller support

  Along with the usual bunch of fixes, cleanups etc"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
  drm/radeon: fix voltage setup on hawaii
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: only enable kv/kb dpm interrupts once v3
  drm/radeon: workaround for CP HW bug on CIK
  drm/radeon: Don't try to enable write-combining without PAT
  drm/radeon: use 0-255 rather than 0-100 for pwm fan range
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/exynos: Add DECON driver
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/exynos: fix NULL pointer reference
  drm/exynos: remove exynos_plane_dpms
  drm/exynos: remove mode property of exynos crtc
  drm/exynos: Remove exynos_plane_dpms() call with no effect
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
  ...
2015-02-16 15:48:00 -08:00
Ajay Kumar
96976c3d9a drm/exynos: Add DECON driver
This patch is based on exynos-drm-next branch of Inki Dae's tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git

DECON(Display and Enhancement Controller) is the new IP
in exynos7 SOC for generating video signals using pixel data.

DECON driver can be used to drive 2 different interfaces on Exynos7:
DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)

The existing FIMD driver code was used as a template to create
DECON driver. Only DECON-INT is supported as of now, and
DECON-EXT support will be added later.

The current version of the driver supports video mode displays.

Changelog v2:
- Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON.

Signed-off-by: Akshu Agrawal <akshua@gmail.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-11 20:27:08 +09:00
Tomi Valkeinen
472da57b1c OMAPDSS: add define for DRA7xx HW version
Add define for DRA7xx DSS version.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-04 12:32:04 +02:00
Steve Longerbeam
b6835a719a gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
This patch changes struct ipu_di_signal_cfg to use struct videomode
to define video timings and flags.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07 19:15:03 +01:00
Jiada Wang
6541d71082 gpu: ipu-di: Add ipu_di_adjust_videomode()
On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).

The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07 19:12:07 +01:00
Jyri Sarha
84a845de57 OMAPDSS: Remove all references to obsolete HDMI audio callbacks
In new model these callbacks are obsolete since the ASoC component
drivers are integrated into the HDMI drivers and no callbacks are
needed anymore.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-12-01 11:09:59 +02:00
Archit Taneja
ef691ff48b OMAPDSS: DT: Get source endpoint by matching reg-id
In omapdss_of_find_source_for_first_ep, we retrieve a source endpoint's DT node,
and then see what omapdss output has the matching device_node pointer in
omap_dss_find_output_by_node.

For all DPI and SDI outputs, the device_node pointer is set as the parent's DSS
device_node pointer. If the source is one of these outputs, the above method
won't work.

To get the correct output for ports within DSS(and in other cases in the future,
where multiple ports might be under one device), we require additional
information which is exclusive to the output port.

We create a new field in omap_dss_device called 'port_num', this provides port
number of the output port corresponding to this device. When searching for the
source endpoint in DT, we extract the 'reg' property from the port corresponding
to the endpoint source. From the list of registered outputs, we pick out that
output which has both dev->of_node and port_num matching with the device_node
pointer and 'reg' of the source endpoint node from DT.

For encoder blocks(the ones which have both an input and output port), we need
to set the port_num as the 'reg' property for the output port as defined in the
DT bindings. We set port_num to 1 in the tfp410 and tpd12s015 encoder drivers.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-11-12 13:40:06 +02:00
Linus Torvalds
0a582821d4 fbdev changes for 3.18
* new 6x10 font
 * various small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUPlVtAAoJEPo9qoy8lh71kCQP/RvzQ2/7H7N/P6HsCZvBAwvM
 02bp8Wx679MGhzcngv6wGVeUwcE4MyhjIbOFim4ZDduti68N4Q+eIpsqPIeef+JU
 emcXe9qpcsviS41kTuRc555M9wBBHeSYB7qLubHcsUprez/UTXZZBrWbXkLBn9oD
 JfP/n82NLOQdjflSrfYciPy3q4x8o3h7uycUxDwrEHI77XsitVCe/M7yJifSOmxn
 LiBgn983N5YQJdM2Dorgi0cFnKCNlpUVraYlbDAiHokaGNevUowCnTp2EkwwzRpQ
 QAycfaI7iTd4WniP9x4GBMieHPDoqxoqD397WnvdGCh5VBBZXVRLkQnePPSC7s1l
 yK6V3UBJB6AmnM4Jxd00aC2dfTjCS6NbaS5yoav0YuH6l7HE/rXgu1APXakV40jh
 vwKhy+3P/Bu47gPfuXB8LlQAZ/3oQ7dlCAH0P84waHJSlYE72RqYXH4Hr4kLQnDG
 a+TYYJwFl6mkieiPFEMs+5UlOhyZJ/yQKJHp0Q0ROF0zv86kJQh3P4ozfV8V9Vq7
 cDn1RHa6/5e4BKVe0NGCuKAxgpF2InFZKqS81QmtRCSIrs9kjNPTXBMci2XZw9qn
 UnRvKSrUdtIxlaBKGam+lhOGGN/pzVFJbGfoDBh1SsknwHdrlHzZ1J1rwWJu7a/3
 7p+9ferk4UPFNu+UUhNB
 =f13d
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - new 6x10 font
 - various small fixes and cleanups

* tag 'fbdev-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (30 commits)
  fonts: Add 6x10 font
  videomode: provide dummy inline functions for !CONFIG_OF
  video/atmel_lcdfb: Introduce regulator support
  fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume
  framebuffer: fix screen corruption when copying
  framebuffer: fix border color
  arm, fbdev, omap2, LLVMLinux: Remove nested function from omapfb
  arm, fbdev, omap2, LLVMLinux: Remove nested function from omap2 dss
  video: fbdev: valkyriefb.c: use container_of to resolve fb_info_valkyrie from fb_info
  video: fbdev: pxafb.c: use container_of to resolve pxafb_info/layer from fb_info
  video: fbdev: cyber2000fb.c: use container_of to resolve cfb_info from fb_info
  video: fbdev: controlfb.c: use container_of to resolve fb_info_control from fb_info
  video: fbdev: sa1100fb.c: use container_of to resolve sa1100fb_info from fb_info
  video: fbdev: stifb.c: use container_of to resolve stifb_info from fb_info
  video: fbdev: sis: sis_main.c: Cleaning up missing null-terminate in conjunction with strncpy
  video: valkyriefb: Fix unused variable warning in set_valkyrie_clock()
  video: fbdev: use %*ph specifier to dump small buffers
  video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT
  video: fbdev: au1200fb: delete double assignment
  video: fbdev: sis: delete double assignment
  ...
2014-10-18 18:03:02 -07:00
Tomi Valkeinen
422b67e0b3 videomode: provide dummy inline functions for !CONFIG_OF
If CONFIG_OF is disabled but we build any driver that tries to
use of_get_display_timing, we get this link error:

ERROR: "of_get_display_timing" [drivers/gpu/drm/rcar-du/rcar-du-drm.ko] undefined!

This adds an empty inline function as an alternative, to avoid changing
each driver using this function when we want to build them without
CONFIG_OF.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-10-07 09:31:45 +03:00
Steve Longerbeam
3feb049f37 gpu: ipu-v3: Add ipu_dump()
Adds ipu_dump() which dumps IPU register state to debug.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02 14:55:56 +02:00