As per the hardware documentation, increase the duration
between attempts to measure ESR as the ESR pulse amplitude got
increased. This is to reduce the power consumption.
Change-Id: I65027413ecb22a1e89e37a12f66c5abda6c3ba28
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, profile integrity register is using only bit 0 to
indicate whether the profile is loaded or not. Now that the
profile can be loaded and/or fuel gauge can be restarted by the
bootloader, extend the usage of that word by using other bits
to provide more information. This is to aid the debugging.
Change-Id: Ib04ab10998de2f57b05cd976c3e9c8a1e2f4c574
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
As per the hardware characterization, update the battery empty
voltage threshold to 2.8V. Since this moves the voltage little
away from cutoff voltage, update the empty SOC interrupt handling
to report SOC as 0. Since we only need the rising edge of empty
SOC interrupt, modify the interrupt flag as well.
Change-Id: I665a6f879af4e6b6e9f94b5464be7894d5ea67cb
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
When a debug board is present, battery ID will be something like
7 Kohms. Expose a fake battery SOC when this is detected. This
will help avoiding the device shutdown if a low battery voltage
is seen by FG and state of charge goes to 0.
Change-Id: I750b2adfb00f12960f74bd552a5896f66ecaece6
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently ANC output is connected to speaker path before PA
is enabled. This is causing click sound during voice call
when adaptive ANC is enabled. Fix this issue by connecting ANC
output to speaker path after PA is enabled.
Change-Id: I5f381b1e0c0222b8ae81d923da0b86d742b3cccd
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
When the MSM resets the USB data lines are pulled low. If an HVDCP adapter
is attached and operating at >5V, and the phone reboots then the HVDCP
adapter will be in a bad state and the USB input will be suspended. Fix
this by forcing the HVDCP adapter to 5V in the shutdown path.
Change-Id: I953d42418f90398bd4248f8b761cf63943ce5532
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Provide a convient and compact way for a bunch of register
reads/saves and writes.
CRs-Fixed: 1079913
Change-Id: Ica6a60f3f5bd1fad624d01ea410e62dbed09dac8
Signed-off-by: Harry Yang <harryy@codeaurora.org>
When programming perfcounter via gpu commands, we may encounter
-EAGAIN because of cancelling rb events either due to soft reset
or when powering down the device. Ignore this error because we
have already set up the perfcounter in software and it will be
programmed in hardware by adreno_perfcounter_restore when gpu
comes back up.
CRs-Fixed: 1024199
Change-Id: I5dc3561d15fa50ac58646f96559cfd262020dda9
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
When any input is removed it is likely that reverse boost can happen.
Detect reverse boost by checking if the switcher-power-ok interrupt
triggers 3 times within 1 second. If detected then suspend all input.
Once VBUS falls the input can be resumed for the next insertion.
Change-Id: I3dbe4fe426111023b60eefd968c426be7d6057b9
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Microphone Activity Detection (MAD) hardware block in codec needs to
be in micbias mode and bandgap must be enabled whenever the input
to the MAD block is from ADC2. Change updates the codec register
sequence for MAD Input mixer control accordingly.
CRs-Fixed: 1085214
Change-Id: Ic57b1db8688ff634ed7d62279baa7c042d126550
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Currently ANC output is connected to speaker path before PA
is enabled. This is causing click sound during voice call
when adaptive ANC is enabled. Fix this issue by connecting ANC
output to speaker path after PA is enabled.
Change-Id: I2103773a17e7d9ee5acb3f21dc955e2da493b3b4
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Make sure that the secure session device is used while freeing the
buffer that was allocated from secure memory.
Change-Id: I07802c21c661fe18fb2fda70980b04f646408d7d
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Enable VDD_APC CPR aging for msmcobalt v2 and define a CPR
closed-loop and open-loop voltage margin reduction of 15 mV
for CPR local rev 3 parts and greater to account for this
feature being enabled.
CRs-Fixed: 1081084
Change-Id: I50a3ca4e09c6cd6edeb5c15478989e19926c6576
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Update the default CPR min/max step quotient,
count repeat, consecutive down, and aging RO scaling
factor values for VDD_APC0 and VDD_APC1 to match the latest
hardware guidelines.
CRs-Fixed: 1080409
Change-Id: Ibb35a3f475725af96276389f78abb790ea5b5b81
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Add stub regulator devices for msmtriton because RPM regulator
support is not yet in place.
CRs-Fixed: 1086513
Change-Id: I40220bcf960a10d7d6271e09b9f85107ed0c24af
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
GCC clock controller is required to be enabled for all peripheral clocks
supported by global clock controller.
Change-Id: I11c6cc7f09b403a09bdf65a14f7b9d327c5d9613
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The fmax & num_fmax have been updated to reflect the new variable names and
also fall back to branch clocks clock_ops for hardware branch clocks for
now until the new ops are available.
Change-Id: I8b86ebbabe37bb86bd20eafe9501c4677f21a553
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add driver support to configure mempools from the device tree.
This will enable mempools to configure per device specific and
reduces the high kgsl memory usage based on configuration.
CRs-Fixed: 1064046
Change-Id: I0a7e36b7e1fef9d42a4c0fe33d69a4debf15af2f
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
GCC region has been mapped by regmap instead of devm_ioremap_resource.
So to map modem restart register which is part of gcc region requires
devm_ioremap otherwise mapping error occurs.
Change-Id: I1d97d8ef831e3a91df47eebf22e1156d0a3712ae
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Bring in updates from msmcortex defconfigs to msmfalcon's.
Change-Id: Iedbae0d4738c7badf3d4faf60f43e8c8bdab51e1
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
In combo usecase there are 2 front-end dai's with
same codec dai, for example, multi-phrase ADSP SVA detection.
Using a single bit as the counter causes the counter to roll
over to 0 during combo usecase.
To resolve this, change counter to unsigned int from single bit.
CRs-Fixed: 1086127
Change-Id: I2dd07bd967b7d4fb4878b6d65bd0f011c6b15bdd
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Ensure that device pointer isn't NULL before using it in
kgsl_snapshot_save_frozen_objs().
Change-Id: I676dfa5567b1d09427e3e7691045fabc71b53d43
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Video kernel modules as LKM make the T32 debugging difficult.
So, We revert the change and make video drivers as part of boot image.
CRs-Fixed: 1086328
Change-Id: Icd8aa9f935eb0096d1e13934ea556c74d7341093
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
Change of colocation group requires to finish CPU busy time accounting
prior to its operation by calling update_task_ravg(). However when
window statistics accounting is disabled, update_task_ravg() acts as
nop and results in incorrect CPU time accounting.
Disallow colocation group change while window statistics accounting is
disabled in order to prevent race between reset_all_window_stats() and
colocation grouping functions.
Change-Id: I6dfa20b8d8b0ae7ccc94119bf9cf14c5e11a1cf7
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
The bandwidth vote determines the bus throughput needed for a
given running UFS gear frequency. For high throughput use cases
the current interface speed based votes may not be sufficient to
achieve peak user level throughput, as it doesn't count for other
system level latencies in the data path. Hence vote higher but
making sure the system stays in nominal voltage corner.
Change-Id: I95cda7e33288df7099826b37c2f436c5a33792e8
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
For DMA pipes, bufer size is 0. This commit fixes a
division by 0 in kernel when connecting DMA pipes.
Change-Id: I11551594e5115e71aa116cc7238953205a4118c3
CRs-Fixed: 1085266
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Add support to change SIDO reference to internal mode
during rock bottom sleep mode.
CRs-Fixed: 1080507
Change-Id: I8d70ad663f3476e1c81cc2126b1229a3c7c80265
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Clients of VADC_HC and BTM include reading voltage phone
power, system thermistors for thermal mitigation such as
msm_therm, case_therm, XO therm. Round robin ADC (RRADC)
provides clients ability to read supported channels from
PMfalcon RRADC such as battery ID, battery thermistors,
DCIN and USBIN voltage and current. Add the supported VADC,
BTM and RR ADC channels for the msmfalcon platforms.
Change-Id: I1b8bf9762642e0af73d7ac7fa51c974b93fd4b31
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Add 352800Hz into pcm known rates to match with the sound
sample rate macro definitions.
CRs-Fixed: 1082850
Change-Id: Iedd78288f71ddcaa9fcb2f63bd3b73be2c0006dd
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Source and Destination addresses passed by user space apps/clients
are validated independent of type of operation to mitigate kernel
address space exploitation.
Change-Id: I9ecb0103d7a73eedb2e0d1db1d5613b18dd77e59
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
The msmcobalt interposer target has interposed with pm_falcon pmic.
Remove the pm_cobalt regulator handler reference, clock and smmu
memory address and offset from the ICNSS DT node. Allow ICNSS DT
node compilation for msmcobalt interposer target.
CRs-Fixed: 1085547
Change-Id: I4aa1b9876bf1afd9b895d89dc5c4323ba3a3f661
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
GPIO_LV_MV subtype has different MODE_SEL mask with other existing
subtypes. Correct the MODE_SEL mask in qpnp_pin_get() function to
make sure it could get the correct status for LV_MV subtype GPIOs.
CRs-Fixed: 1081831
Change-Id: Ibeb5d34412d4333f9c7f21d2fc7df1d3b1d4e72e
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
In case of remote QMI client restart, QMI client disconnect
is notified to qmi server. Handle this notification by going
over all the active usb audio devices and issue set alt 0
on corresponding active interfaces of device. After this
perform usb audio device clean up to unmap iova.
Change-Id: Ie89b06d821c1f968ecc30333654bc3a1466f74e3
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
There is a possibility of unacknowledged pending interrupt at the time
of secondary event ring cleanup. As a result xHC does not generate any
interrupt further because event handler busy flag is set. Hence disable
interrupter to prevent any further interrupt, acknowledge any pending
interrupt and clear event handler busy flag. This allows xHC to generate
interrupt after setting up new event ring.
Change-Id: I1b1791eacbf7afffd101d56d0ae06fe237b8c076
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Prevent using a binder_ref with only weak references where a strong
reference is required.
BUG: 30445380
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Git-repo: https://android.googlesource.com/kernel/msm.git
Git-commit: 5e2a2bc89956ae1c739854403408059144b23c28
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
Change-Id: I66c15b066808f28bd27bfe50fd0e03ff45a09fca
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
Current bus_floor_vote_store_api does not limit/check
the size of the string in input, allowing stack overflow.
Specify the max number of characters read allowable to
the size of destination buffer.
CRs-Fixed: 1050455
Change-Id: Idd409e3e38cfb01b28fa24543112d6bb206314ff
Signed-off-by: David Dai <daidavid1@codeaurora.org>
