Add support to receive a static ratio from userspace to
divide the swap pages between ZRAM and disk based swap
devices. The existing infrastructure allows to keep
same priority for multiple swap devices, which results
in round robin distribution of pages. With this patch,
the ratio can be defined.
CRs-fixed: 968416
Change-Id: I54f54489db84cabb206569dd62d61a8a7a898991
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
cpu3 stuck in printk more time in spin lock low_water_lock cause cpu0
get spin lock fail and system crashed.
CRs-Fixed: 521570
Change-Id: I75356a4b4171ae2888ce6cce792f569b5ca8cdcf
Signed-off-by: Tingting Yang <tingting@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
When a qos request is added with IRQ affinity, irq notifier
for that irq is added and with out disabling the irq
notifier if the irq is free it is through a warning.
So disable irq notifier when the qos request is removed.
Change-Id: I50faa4ecbe1b632c0f0f203ca52faf18753c33d4
Signed-off-by: Srinivas Rao L <lsrao@codeaurora.org>
The current maximum length of an IPC Logging log context name is 20
characters. Some clients are now using names longer than this.
Increase the maximum length to 32. This change increases the IPC Logging
version to 3.
Change-Id: I9daecb8a7c6c3aea427efd1c75e307456e9c6c21
Signed-off-by: Steven Cahail <scahail@codeaurora.org>
IPC Logging currently creates debugfs directories for each of its
logging contexts, but does not remove them when destroying the contexts.
If a user attempts to access a directory associated with a destroyed
context, a crash will result.
Destroy debugfs directories when the logging context is destroyed.
Change-Id: I5a3b1cbf2fb5d9d0ede3d9da0fccd605b9fdf619
Signed-off-by: Steven Cahail <scahail@codeaurora.org>
It is possible that 'root' variable is used uninitialized. This
change avoids usage of uninitialized usage of the variable.
Change-Id: I9a3bd941a23736cb003f209cf6dde84fd859e9e6
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
Add all cpu notifiers in CONSOLE_FLUSH_ON_HOTPLUG config
flag to avoid hotplug latencies and by default config
CONSOLE_FLUSH_ON_HOTPLUG flag is disabled.
Change-Id: I389f207d8faf84cfd4267d52213e40a47a43774d
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
When a deferrable work (INIT_DEFERRABLE_WORK, etc.) is queued via
queue_delayed_work() it's probably intended to run the work item on any
CPU that isn't idle. However, we queue the work to run at a later time
by starting a deferrable timer that binds to whatever CPU the work is
queued on which is same with queue_delayed_work_on(smp_processor_id())
effectively.
As a result WORK_CPU_UNBOUND work items aren't really cpu unbound now.
In fact this is perfectly fine with UP kernel and also won't affect much a
system without dyntick with SMP kernel too as every cpus run timers
periodically. But on SMP systems with dyntick current implementation leads
deferrable timers not very scalable because the timer's base which has
queued the deferrable timer won't wake up till next non-deferrable timer
expires even though there are possible other non idle cpus are running
which are able to run expired deferrable timers.
The deferrable work is a good example of the current implementation's
victim like below.
INIT_DEFERRABLE_WORK(&dwork, fn);
CPU 0 CPU 1
queue_delayed_work(wq, &dwork, HZ);
queue_delayed_work_on(WORK_CPU_UNBOUND);
...
__mod_timer() -> queues timer to the
current cpu's timer
base.
...
tick_nohz_idle_enter() -> cpu enters idle.
A second later
cpu 0 is now in idle. cpu 1 exits idle or wasn't in idle so
now it's in active but won't
cpu 0 won't wake up till next handle cpu unbound deferrable timer
non-deferrable timer expires. as it's in cpu 0's timer base.
To make all cpu unbound deferrable timers are scalable, introduce a common
timer base which is only for cpu unbound deferrable timers to make those
are indeed cpu unbound so that can be scheduled by tick_do_timer_cpu.
This common timer fixes scalability issue of delayed work and all other cpu
unbound deferrable timer using implementations.
Change-Id: I8b6c57d8b6445a76fa02a8cb598a8ef22aef7200
CC: Thomas Gleixner <tglx@linutronix.de>
CC: John Stultz <john.stultz@linaro.org>
CC: Tejun Heo <tj@kernel.org>
[joonwoop@codeaurora.org: timer->base replaced with CPU index so get
the deferrable timer wheel from lock_timer_base() instead of
do_init_timer().]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
The perf event permission checks are necessary because they introduce
a security concern where one userspace task can monitor another task
and gain security related information. That concern doesn't exist for
kernel owned perf events since the kernel already has access to
everything. So, skip permission checks for kernel owned perf events.
Change-Id: I7121f5e03cf6ce8f0bfc9b5a69488efb80a97051
Signed-off-by: Rohit Gupta <rohgup@codeaurora.org>
[satyap: trivial merge conflict resolution]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
An incorrect pointer to the event was being passed, instead of
pointer to the remove event struct. Pass the correct pointer.
Change-Id: I7c35c5bb3a14d74a9b36c3d1dbd7af0bf80e7efe
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
It is sometimes useful to profile how long CPU frequency switches
take, and traces have already been added for this purpose. Make
use of these and the trace_stat framework to generate statistical
histograms of frequency switch times in the following format:
# cat /sys/kernel/debug/tracing/trace_stat/cpu_freq_switch
CPU START_KHZ END_KHZ COUNT AVG_US MIN_US MAX_US
| | | | | | |
0 384000 1512000 3 2787 1648 3418
0 486000 384000 1 1129 1129 1129
0 1458000 384000 1 3174 3174 3174
0 1512000 384000 1 3265 3265 3265
0 1512000 486000 1 3235 3235 3235
0 1512000 1458000 1 213 213 213
0 1512000 1512000 1 0 0 0
Profiling is disabled by default (since it does incur some
overhead). It can be enabled or re-disabled echoing 1 or 0
to /sys/kernel/debug/tracing/cpu_freq_switch_profile_enabled
Change-Id: I3ef7f9d681b7bd13bcaa031003b10312afe1aefe
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
* lsk-44/linux-linaro-lsk-v4.4:
Linux 4.4.3
modules: fix modparam async_probe request
module: wrapper for symbol name.
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
prctl: take mmap sem for writing to protect against others
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: inode recovery readahead can race with inode buffer creation
libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
futex: Drop refcount if requeue_pi() acquired the rtmutex
devm_memremap_release(): fix memremap'd addr handling
ipc/shm: handle removed segments gracefully in shm_mmap()
intel_scu_ipcutil: underflow in scu_reg_access()
mm,thp: khugepaged: call pte flush at the time of collapse
dump_stack: avoid potential deadlocks
radix-tree: fix oops after radix_tree_iter_retry
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
MAINTAINERS: return arch/sh to maintained state, with new maintainers
memcg: only free spare array when readers are done
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()
scripts/bloat-o-meter: fix python3 syntax error
dma-debug: switch check from _text to _stext
m32r: fix m32104ut_defconfig build fail
xhci: Fix list corruption in urb dequeue at host removal
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts
iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users
iommu/amd: Correct the wrong setting of alias DTE in do_attach
iommu/vt-d: Don't skip PCI devices when disabling IOTLB
Input: vmmouse - fix absolute device registration
string_helpers: fix precision loss for some inputs
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
Input: elantech - mark protocols v2 and v3 as semi-mt
mm: fix regression in remap_file_pages() emulation
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
mm: fix mlock accouting
libnvdimm: fix namespace object confusion in is_uuid_busy()
mm: soft-offline: check return value in second __get_any_page() call
perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data
KVM: PPC: Fix ONE_REG AltiVec support
KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8
KVM: arm/arm64: Fix reference to uninitialised VGIC
arm64: dma-mapping: fix handling of devices registered before arch_initcall
ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
ARM: OMAP2+: Fix save_secure_ram_context for rodata
ARM: OMAP2+: Fix l2dis_3630 for rodata
ARM: OMAP2+: Fix l2_inv_api_params for rodata
ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
ARM: dts: at91: sama5d4: fix instance id of DBGU
ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
ARM: dts: omap5-board-common: enable rtc and charging of backup battery
ARM: dts: Fix omap5 PMIC control lines for RTC writes
ARM: dts: Fix wl12xx missing clocks that cause hangs
ARM: nomadik: fix up SD/MMC DT settings
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
ARM: 8519/1: ICST: try other dividends than 1
arm64: mm: avoid calling apply_to_page_range on empty range
ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
powerpc/ioda: Set "read" permission when "write" is set
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/eeh: Fix PE location code
SUNRPC: Fixup socket wait for memory
udf: Check output buffer length when converting name to CS0
udf: Prevent buffer overrun with multi-byte characters
udf: limit the maximum number of indirect extents in a row
pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
nfs: Fix race in __update_open_stateid()
pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
NFS: Fix attribute cache revalidation
cifs: fix erroneous return value
cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
cifs: fix race between call_async() and reconnect()
cifs: Ratelimit kernel log messages
iio: inkern: fix a NULL dereference on error
iio: pressure: mpl115: fix temperature offset sign
iio: light: acpi-als: Report data as processed
iio: dac: mcp4725: set iio name property in sysfs
iio: add IIO_TRIGGER dependency to STK8BA50
iio: add HAS_IOMEM dependency to VF610_ADC
iio-light: Use a signed return type for ltr501_match_samp_freq()
iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
iio: adis_buffer: Fix out-of-bounds memory access
scsi: fix soft lockup in scsi_remove_target() on module removal
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
SCSI: fix crashes in sd and sr runtime PM
iscsi-target: Fix potential dead-lock during node acl delete
scsi: add Synology to 1024 sector blacklist
klist: fix starting point removed bug in klist iterators
tracepoints: Do not trace when cpu is offline
tracing: Fix freak link error caused by branch tracer
perf tools: tracepoint_error() can receive e=NULL, robustify it
tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
ptrace: use fsuid, fsgid, effective creds for fs access checks
Btrfs: fix direct IO requests not reporting IO error to user space
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
btrfs: properly set the termination value of ctx->pos in readdir
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
Btrfs: fix fitrim discarding device area reserved for boot loader's use
btrfs: handle invalid num_stripes in sys_array
ext4: don't read blocks from disk after extents being swapped
ext4: fix potential integer overflow
ext4: fix scheduling in atomic on group checksum failure
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
serial: 8250_pci: Add Intel Broadwell ports
tty: Add support for PCIe WCH382 2S multi-IO card
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
staging/speakup: Use tty_ldisc_ref() for paste kworker
phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
phy: twl4030-usb: Relase usb phy on unload
ALSA: seq: Fix double port list deletion
ALSA: seq: Fix leak of pool buffer at concurrent writes
ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
ALSA: hda - Cancel probe work instead of flush at remove
x86/mm: Fix vmalloc_fault() to handle large pages properly
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
x86/mm: Fix types used in pgprot cacheability flags translations
Linux 4.4.2
HID: multitouch: fix input mode switching on some Elan panels
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
zsmalloc: fix migrate_zspage-zs_free race condition
zram: don't call idr_remove() from zram_remove()
zram: try vmalloc() after kmalloc()
zram/zcomp: use GFP_NOIO to allocate streams
rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded
rtlwifi: rtl8821ae: Fix errors in parameter initialization
crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init()
crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts
crypto: atmel-sha - fix atmel_sha_remove()
crypto: algif_skcipher - Do not set MAY_BACKLOG on the async path
crypto: algif_skcipher - Do not dereference ctx without socket lock
crypto: algif_skcipher - Do not assume that req is unchanged
crypto: user - lock crypto_alg_list on alg dump
EVM: Use crypto_memneq() for digest comparisons
crypto: algif_hash - wait for crypto_ahash_init() to complete
crypto: shash - Fix has_key setting
crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
crypto: caam - make write transactions bufferable on PPC platforms
crypto: algif_skcipher - sendmsg SG marking is off by one
crypto: algif_skcipher - Load TX SG list after waiting
crypto: crc32c - Fix crc32c soft dependency
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_hash - Fix race condition in hash_check_key
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_skcipher - Remove custom release parent function
crypto: algif_hash - Remove custom release parent function
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
ahci: Intel DNV device IDs SATA
libata: disable forced PORTS_IMPL for >= AHCI 1.3
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_hash - Require setkey before accept(2)
crypto: hash - Add crypto_ahash_has_setkey
crypto: algif_skcipher - Add nokey compatibility path
crypto: af_alg - Add nokey compatibility path
crypto: af_alg - Fix socket double-free when accept fails
crypto: af_alg - Disallow bind/setkey/... after accept(2)
crypto: algif_skcipher - Require setkey before accept(2)
sched: Fix crash in sched_init_numa()
ext4 crypto: add missing locking for keyring_key access
iommu/io-pgtable-arm: Ensure we free the final level on teardown
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
n_tty: Fix unsafe reference to "other" ldisc
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
usb: xhci: handle both SSIC ports in PME stuck quirk
usb: phy: msm: fix error handling in probe.
usb: cdc-acm: send zero packet for intel 7260 modem
usb: cdc-acm: handle unlinked urb in acm read callback
USB: option: fix Cinterion AHxx enumeration
USB: serial: option: Adding support for Telit LE922
USB: cp210x: add ID for IAI USB to RS485 adaptor
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
usb: hub: do not clear BOS field during reset device
USB: visor: fix null-deref at probe
USB: serial: visor: fix crash on detecting device without write_urbs
ASoC: rt5645: fix the shift bit of IN1 boost
saa7134-alsa: Only frees registered sound cards
ALSA: dummy: Implement timer backend switching more safely
ALSA: hda - Fix bad dereference of jack object
ALSA: hda - Fix speaker output from VAIO AiO machines
Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
ALSA: hda - Fix static checker warning in patch_hdmi.c
ALSA: hda - Add fixup for Mac Mini 7,1 model
ALSA: timer: Fix race between stop and interrupt
ALSA: timer: Fix wrong instance passed to slave callbacks
ALSA: timer: Fix race at concurrent reads
ALSA: timer: Fix link corruption due to double start or stop
ALSA: timer: Fix leftover link at closing
ALSA: timer: Code cleanup
ALSA: seq: Fix lockdep warnings due to double mutex locks
ALSA: seq: Fix race at closing in virmidi driver
ALSA: seq: Fix yet another races among ALSA timer accesses
ASoC: dpcm: fix the BE state on hw_free
ALSA: pcm: Fix potential deadlock in OSS emulation
ALSA: hda/realtek - Support Dell headset mode for ALC225
ALSA: hda/realtek - Support headset mode for ALC225
ALSA: hda/realtek - New codec support of ALC225
ALSA: rawmidi: Fix race at copying & updating the position
ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check
ALSA: rawmidi: Make snd_rawmidi_transmit() race-free
ALSA: seq: Degrade the error message for too many opens
ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()
ALSA: dummy: Disable switching timer backend via sysfs
ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
ALSA: hda - disable dynamic clock gating on Broxton before reset
ALSA: Add missing dependency on CONFIG_SND_TIMER
ALSA: bebob: Use a signed return type for get_formation_index
ALSA: usb-audio: avoid freeing umidi object twice
ALSA: usb-audio: Add native DSD support for PS Audio NuWave DAC
ALSA: usb-audio: Fix OPPO HA-1 vendor ID
ALSA: usb-audio: Add quirk for Microsoft LifeCam HD-6000
ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay
hrtimer: Handle remaining time proper for TIME_LOW_RES
md/raid: only permit hot-add of compatible integrity profiles
media: i2c: Don't export ir-kbd-i2c module alias
parisc: Fix __ARCH_SI_PREAMBLE_SIZE
parisc: Protect huge page pte changes with spinlocks
printk: do cond_resched() between lines while outputting to consoles
tracing/stacktrace: Show entire trace if passed in function not found
tracing: Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()
PCI: Fix minimum allocation address overwrite
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD
mtd: nand: assign reasonable default name for NAND drivers
wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)
wlcore/wl12xx: spi: fix oops on firmware load
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
ocfs2/dlm: ignore cleaning the migration mle that is inuse
ALSA: hda - Implement loopback control switch for Realtek and other codecs
block: fix bio splitting on max sectors
base/platform: Fix platform drivers with no probe callback
HID: usbhid: fix recursive deadlock
ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
block: split bios to max possible length
NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
crypto: sun4i-ss - add missing statesize
Linux 4.4.1
arm64: kernel: fix architected PMU registers unconditional access
arm64: kernel: enforce pmuserenr_el0 initialization and restore
arm64: mm: ensure that the zero page is visible to the page table walker
arm64: Clear out any singlestep state on a ptrace detach operation
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered
powerpc: Make value-returning atomics fully ordered
powerpc/tm: Check for already reclaimed tasks
batman-adv: Drop immediate orig_node free function
batman-adv: Drop immediate batadv_hard_iface free function
batman-adv: Drop immediate neigh_ifinfo free function
batman-adv: Drop immediate batadv_neigh_node free function
batman-adv: Drop immediate batadv_orig_ifinfo free function
batman-adv: Avoid recursive call_rcu for batadv_nc_node
batman-adv: Avoid recursive call_rcu for batadv_bla_claim
team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
net/mlx5_core: Fix trimming down IRQ number
bridge: fix lockdep addr_list_lock false positive splat
ipv6: update skb->csum when CE mark is propagated
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
bonding: Prevent IPv6 link local address on enslaved devices
net: preserve IP control block during GSO segmentation
udp: disallow UFO for sockets with SO_NO_CHECK option
net: pktgen: fix null ptr deref in skb allocation
sched,cls_flower: set key address type when present
tcp_yeah: don't set ssthresh below 2
ipv6: tcp: add rcu locking in tcp_v6_send_synack()
net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory
vxlan: fix test which detect duplicate vxlan iface
unix: properly account for FDs passed over unix sockets
xhci: refuse loading if nousb is used
usb: core: lpm: fix usb3_hardware_lpm sysfs node
USB: cp210x: add ID for ELV Marble Sound Board 1
rtlwifi: fix memory leak for USB device
ASoC: compress: Fix compress device direction check
ASoC: wm5110: Fix PGA clear when disabling DRE
ALSA: timer: Handle disconnection more safely
ALSA: hda - Flush the pending probe work at remove
ALSA: hda - Fix missing module loading with model=generic option
ALSA: hda - Fix bass pin fixup for ASUS N550JX
ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
ALSA: hrtimer: Fix stall by hrtimer_cancel()
ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix double unlink of active_list
ALSA: timer: Fix race among timer ioctls
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: timer: Harden slave timer list handling
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: seq: Fix race at timer setup and close
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
x86/mm: Improve switch_mm() barrier comments
x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
x86/boot: Double BOOT_HEAP_SIZE to 64KB
x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
KVM: x86: correctly print #AC in traces
KVM: x86: expose MSR_TSC_AUX to userspace
x86/xen: don't reset vcpu_info on a cancelled suspend
KEYS: Fix keyring ref leak in join_session_keyring()
Conflicts:
arch/arm64/kernel/perf_event.c
drivers/scsi/sd.c
sound/core/compress_offload.c
Change-Id: I9f77fe42aaae249c24cd6e170202110ab1426878
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
The sysctl node sched_new_task_windows is only for CONFIG_SCHED_HMP and
CONFIG_SCHED_FREQ_INPUT.
Change-Id: I4791e977fa8516fd2cd31198f71103b8d7e874c3
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Select given task's prev_cpu when the task slept for short period to
reduce latency of task placement and migrations. A new tunable
/proc/sys/kernel/sched_select_prev_cpu_us introduced to determine whether
tasks are eligible to go through fast path.
CRs-fixed: 947467
Change-Id: Ia507665b91f4e9f0e6ee1448d8df8994ead9739a
[joonwoop@codeaurora.org: fixed conflict in include/linux/sched.h,
include/linux/sched/sysctl.h, kernel/sched/core.c and kernel/sysctl.c]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
At present, HMP scheduler uses sched_clock to setup window boundary to
be aligned with timer interrupt to ensure timer interrupt fires after
window rollover. However this alignment won't last long since the timer
interrupt rearms next timer based on time measured by ktime which isn't
coupled with sched_clock.
Convert sched_clock to ktime to avoid wallclock discrepancy between
scheduler and timer so that we can ensure scheduler's window boundary is
always aligned with timer.
CRs-fixed: 933330
Change-Id: I4108819a4382f725b3ce6075eb46aab0cf670b7e
[joonwoop@codeaurora.org: fixed minor conflict in include/linux/tick.h
and kernel/sched/core.c. omitted fixes for kernel/sched/qhmp_core.c]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Following the change "57e2905 sched: Skip resetting HMP stats when
max frequencies remain unchanged" the scheduler fails to update
min/max capacities appropriately when CPUs are hot added after being
hot removed. Fix this problem by handling the CPUFREQ_CREATE_POLICY
notification and explicitly updating min/max capacities.
Change-Id: I5dadac3258e18897fa3d505cf128ebe24c091efa
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
cpu_hardirq_time and cpu_softirq_time are protected with
seqlock on 32bit systems. There is a potential deadlock
with this seqlock and rq->lock.
CPU 1 CPU0
========================== ========================
--> acquire CPU0 rq->lock --> __irq_enter()
----> task enqueue/dequeue ----> irqtime_account_irq()
------> update_rq_clock() ------> irq_time_write_begin()
--------> irq_time_read() --------> sched_account_irqtime()
(waiting for the seqlock (waiting for the CPU0 rq->lock)
held in irq_time_write_begin()
Fix this issue by dropping the seqlock before calling
sched_account_irqtime()
Change-Id: I29a33876e372f99435a57cc11eada9c8cfd59a3f
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Scheduler ftrace events currently generate a lot of data when turned
on. The excessive log messages often end up overflowing trace buffers
for long use cases or crowding out other events. Optimize scheduler
events so that the log spew is less and more manageable. To that end
change the variable type for some event fields; introduce variants
of sched_cpu_load that can be turned on/off for separate code paths
and remove unused fields from various events.
Change-Id: I2b313542b39ad5e09a01ad1303b5dfe2c4883b8a
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed conflict in rt.c due to
CONFIG_SCHED_QHMP.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
It's possible select_best_cpu() gets called before the first cpufreq
notifier call. In such scenario select_best_cpu() can hang forever by
not clearing search_cpus.
Initialize frequency domain cpumask with the CPU of rq to avoid such
scenario.
CRs-fixed: 931349
Change-Id: If8d31c5477efe61ad7c6b336ba9e27ca6f556b63
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
At present select_best_cpu() bails out when best idle CPU found without
printing sched_task_load trace event. Print it.
Change-Id: Ie749239bdb32afa5b1b704c048342b905733647e
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Add a bias towards the RT task's previous CPU and sibling CPUs in order
to avoid cache bouncing and migrations.
CRs-fixed: 927903
Change-Id: I45d79d774e65efcb38282130b6692b4c3b03c2f0
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
To migrate a running task using stop_one_cpu, one has to give up
the the pi_lock and rq_lock. To safeguard against migration
between giving up those locks and actually invoking stop_one_cpu,
one has to save away task_cpu(p) before releasing pi_lock, and
use the saved value when passing it as the src_cpu argument to
stop_one_cpu. If the current task_cpu is passed in, the task may
have already been migrated to that CPU for whatever other reason.
sched_exec attempts to invoke stop_one_cpu with source CPU
set to task_cpu(task) after dropping the pi_lock. While this
doesn't result in a functional error, it is rather useless to
have the entire migration code run when the task is already
running on the destination CPU.
Change-Id: I02963ed02c7119a3d707580a191fbc86b94cdfaf
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
[joonwoop@codeaurora.org: omitted changes for qhmp_core.c]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Tasks that are on the runqueue continuously for a certain amount of time
have the potential to be big tasks at the end of the window in which they
are runnable. In such scenarios ramping the CPU frequency early can
boost performance rather than waiting till the end of a window for the
governor to query load. Notify the governor early at every tick when a
task has been observed to execute beyond some percentage of the tick
period.
The threshold beyond which a task is eligible for early detection can be
changed via the tunable sched_early_detection_duration. The feature itself
is enabled only when scheduler boost is in effect.
Change-Id: I528b72bbc79a55b4593d1b8ab45450411c6d70f3
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed conflict in scheduler_tick() in
kernel/sched/core.c. fixed minor conflicts in include/linux/sched.h,
include/linux/sched/sysctl.h and kernel/sysctl.c due to
CONFIG_SCHED_QHMP.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
A change in cpufreq policy parameters currently trigger a partial reset
of HMP stats. This is necessary when there are changes in the max
frequency of any cluster since updated load scaling factors necessitate
updating the number of big and small tasks on every CPU. However, this
computation is redundant when parameters other than the max freq change.
Optimize code by avoiding the redundant calculations.
Change-Id: Ib572f5dfdc4ada378e695f328ff81e2ce31132ba
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Add best_cpu and latency field to sched_task_load trace event. The latency
field represents combined latency of update_task_ravg(), update_task_ravg()
and select_best_cpu() which is useful to analyze latency overhead of HMP
scheduler.
Change-Id: Ie6d777c918d0414d361d758490e3cd7d509f5837
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Avoid unnecessary multiplication and division when load scaling factor
is 1024.
Change-Id: If3cb63a77feaf49cc69ddec7f41cc3c1cabbfc5a
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
At present in order to estimate power cost of CPU load, HMP scheduler
converts CPU load to coresponding frequency on the fly which can be
avoided.
Optimize and reduce execution time of select_best_cpu() by precomputing
CPU load to frequency conversion. This optimization reduces about ~20% of
execution time of select_best_cpu() on average.
Change-Id: I385c57f2ea9a50883b76ba6ca3deb673b827217f
[joonwoop@codeaurora.org: fixed minior conflict in kernel/sched/sched.h.
stripped out codes for CONFIG_SCHED_QHMP.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
The commit 392edf4969d20 ("sched: avoid stale cumulative_runnable_avg
HMP statistics) introduced the callback function fixup_hmp_sched_stats()
so update_history() can avoid decrement and increment pair of HMP stat.
However the commit also made fixup function to do obscure p->ravg.demand
update which isn't the cleanest way.
Revise the function fixup_hmp_sched_stats() so the caller can update
p->ravg.demand directly.
Change-Id: Id54667d306495d2109c26362813f80f08a1385ad
[joonwoop@codeaurora.org: stripped out CONFIG_SCHED_QHMP.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Account amount of load contributed by new tasks within CPU load so that
governor can apply different policy when CPU is loaded by new tasks.
To be able to distinguish new task load a new tunable
sched_new_task_windows also introduced. The tunable defines tasks as new
when the tasks are have been active less than configured windows.
Change-Id: I2e2e62e4103882f7362154b792ab978b181b9f59
Suggested-by: Saravana Kannan <skannan@codeaurora.org>
[joonwoop@codeaurora.org: ommited changes for
drivers/cpufreq/cpufreq_interactive.c. cpufreq changes needs to be
applied separately later. fixed conflict in include/linux/sched.h and
include/linux/sched/sysctl.h. omitted changes for qhmp_core.c]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
On the 3.18 kernel version and beyond, when the affinity for an
enqueued task changes such that migration is required, the rq
variable gets updated to the destination rq. This means that
check_for_freq_change() skips the source CPU frequency check and
instead double checks the destination CPU. Fix this by using the
src_cpu variable instead.
Change-Id: I14727a34e22c50c9a839007d474802f96a2f49f6
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed conflict int __migrate_task().]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Add per-cpu tunable to set the extra cost to use a CPU that is idle.
Add the same for a cluster.
Change-Id: I4aa53f3c42c963df7abc7480980f747f0413d389
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
[joonwoop@codeaurora.org: omitted changes for qhmp*.[c,h] stripped out
CONFIG_SCHED_QHMP in drivers/base/cpu.c and include/linux/sched.h]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Add new API to the scheduler to allow low power mode driver to inform
the scheduler about the d-state of a cluster. This can be leveraged by
the scheduler to make an informed decision about the cost of placing a task
on a cluster.
Change-Id: If0fe0fdba7acad1c2eb73654ebccfdb421225e62
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
[joonwoop@codeaurora.org: omitted fixes for qhmp_core.c and qhmp_core.h]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
At present HMP scheduler packs tasks to busy CPU till the CPU's load is
100% to avoid waking up of idle CPU as much as possible. Such aggressive
packing leads unintended CPU frequency raise as governor raises the busy
CPU's frequency when its load is more than configured frequency max load
which can be less than 100%.
Fix to take into account of governor's frequency max load and pack tasks
only when the CPU's projected load is less than max load to avoid
unnecessary frequency raise.
Change-Id: I4447e5e0c2fa5214ae7a9128f04fd7585ed0dcac
[joonwoop@codeaurora.org: fixed minor conflict in kernel/sched/sched.h]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Set init_task_load to 100% to allow new tasks to wake up on the best
performance CPUs.
Change-Id: Ie762a3f629db554fb5cfa8c1d7b8b2391badf573
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
At present HMP task placement algorithm places wake-up task on any lowest
power cost CPU in the system even if the task's previous CPU is also one
of the lowest power cost CPU. Placing task on the previous CPU can reduce
cache bouncing.
Add a bias towards the task's previous CPU and CPU in the same cache domain
with previous CPU.
Change-Id: Ieab3840432e277048058da76764b3a3f16e20c56
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Task->on_rq has three states:
0 - Task is not on runqueue (rq)
1 (TASK_ON_RQ_QUEUED) - Task is on rq
2 (TASK_ON_RQ_MIGRATING) - Task is on rq but in the
process of being migrated to another rq
When a task is moving between rqs task->on_rq state should be
TASK_ON_RQ_MIGRATING
CRs-fixed: 884720
Change-Id: I1572aba00a0273d4ad5bc9a3dd60fb68e2f0b895
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
On older kernel versions p->on_rq was a binary value that did not
allow distinguishing between enqueued and migrating tasks. As a result
fixup_busy_time would have to do temporary load adjustments to ensure
that update_history does not do incorrect demand adjustments for
migrating tasks. Since p->on_rq can now be used make a distinction
between migrating and enqueued tasks, there is no need to do these
temporary load calculations. Instead make sure update_history() only
does load adjustments on enqueued tasks.
Change-Id: I1f800ac61a045a66ab44b9219516c39aa08db087
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Add zone awareness to the load balancer. Remove all earlier restrictions
that the load balancer had for inter cluster kicks and migration.
Change-Id: I12ad3d0c2d2e9bb498f49a231810f2ad418b061f
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed minor conflict in nohz_kick_needed() due
to its return type change.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
For the fair sched class, update the select_best_cpu() policy to do
power based placement. The hope is to minimize the voltage at which
the CPU runs.
While RT tasks already do power based placement, their placement
preference has to now take into account the power cost of all tasks
on a given CPU. Also remove the check for sched_boost since
sched_boost no longer intends to elevate all tasks to the highest
capacity cluster.
Change-Id: Ic6a7625c97d567254d93b94cec3174a91727cb87
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Task packing will now be determined solely on the basis of the
power cost of task placement. All tasks are eligible for packing.
Remove the notion of "small" tasks from the scheduler.
Change-Id: I72d52d04b2677c6a8d0bc6aa7d50ff0f1a4f5ebb
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Energy aware core rotation is not compatible with the power
based task placement being introduced in subsequent patches.
Remove all existing EA based task placement/migration logic.
power_cost() is the only function remaining. This function has
been modified to return the total power cost associated with a
task on a given CPU taking existing load on that CPU into
account.
Change-Id: Ia00501e3cbfc6e11446a9a2e93e318c4c42bdab4
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed multiple conflicts in fair.c and minor
conflict in features.h]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Encourage IDLE and NEWLY_IDLE load balance by ignoring cache hotness and
discourage active load balance by increasing busy balancing failure
threshold. Such changes are for idle CPUs to help out busy CPUs more
aggressively and reduce unnecessary active load balance within the
same CPU domain.
Change-Id: I22f6aba11932ccbb82a436c0532589c46f9148ed
[joonwoop@codeaurora.org: fixed conflict in need_active_balance() and
can_migrate_task().]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
When a new window starts for a task and the task is on a rq, scheduler
decreases rq's cumulative_runnable_avg momentarily, re-account task's
demand and increases rq's cumulative_runnable_avg with newly accounted
task's demand. Therefore there is short time period that rq's
cumulative_runnable_avg is less than what it's supposed to be.
Meanwhile, there is chance that other CPU is in search of best CPU to place
a task and makes suboptimal decision with momentarily stale
cumulative_runnable_avg.
Fix such issue by adding or subtracting of delta between task's old
and new demand instead of decrementing and incrementing of entire task's
load.
Change-Id: I3c9329961e6f96e269fa13359e7d1c39c4973ff2
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Currently RT tasks prefer to go to the lowest power CPU in the
system. This can end up causing contention on the lowest power
CPU. Instead ensure that RT tasks end up on the lowest power
cluster and the least loaded CPU within that cluster.
Change-Id: I363b3d43236924962c67d2fb5d3d2d09800cd994
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
With the introduction of "6dd123a sched: update ld_moved for active
balance from the load balancer" the function load_balance() returns a
non zero number of migrated tasks in anticipation of tasks that will
end up on that CPU via active migration. Unfortunately on kernel
versions 3.14 and beyond this ends up breaking pick_next_task_fair()
which assumes that the load balancer only returns non zero numbers for
tasks already migrated on to the destination CPU. A non zero number
then triggers a rerun of the pick_next_task_fair() logic so that it
can return one of the migrated tasks as the next task. When the load
balancer returns a non zero number for tasks that will be moved via
active migration, the rerun of pick_next_task_fair() finds the CPU to
still have no runnable tasks. This in turn causes a rerun of
idle_balance() and possibly migrating another task. Hence the
destination CPU can unintentionally end up pulling several tasks.
The intent of the change above is still necessary though to indicate
termination of load balance at higher scheduling domains when active
migration occurs. Achieve the same effect by using continue_balancing
instead of faking the number of pulled tasks. This way
pick_next_task_fair() stays happy and load balance stops at higher
scheduling domains.
Change-Id: Id223a3287e5d401e10fbc67316f8551303c7ff96
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Inline relatively small and frequently used function scale_load_to_cpu().
CRs-fixed: 849655
Change-Id: Id5f60595c394959d78e6da4cc4c18c338fec285b
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Function best_small_task_cpu() has bias on mostly idle CPUs and shallow
cstate CPUs. Thus chance of needing to find the least busy or the least
power cost fallback CPU is quite rare typically. At present, however,
the function finds those two CPUs always unnecessarily for most of time.
Optimize the function by amending it to look for the least busy CPU and
the least power cost fallback CPU only when those are in need. This change
is solely for optimization and doesn't make functional changes.
CRs-fixed: 849655
Change-Id: I5eca11436e85b448142a7a7644f422c71eb25e8e
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
