Extend HDCP1.4 SRM support for fb based hdmi driver as well.
Change-Id: I3d6597503d95b066d1fcfa71218cdda70965fbd0
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Extend HDCP2.2 SRM support for fb based hdmi driver as well.
Change-Id: I39bef2a814c2a2404a0a03584f23c58c69c10909
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Display Port driver never supported YC420 formats.
Also w.r.t to display quality, 4K30 RGB 8bit is
better than 4K60 YC420 8bit.
So, do not include edid modes(VICs) from YC420 Video
Data Block while parsing EDID.
Change-Id: I77f2c45c22beceb7f554a4c063f6e6947dc4ba8a
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Clear PP features dirty flags only when they are programmed, based on
programming stage, i.e. clear dirty flags of features programmed in
early stage after early stage programming and clear dirty flags of
features programmed in deferred stage after their actual programming
is complete.
Clearing the flags in one go is resulting in missing programming of
features designated to be programmed in early stage, if the dirty flags
are updated in between the stages.
Change-Id: If65a5982254a7421c6f0ec32018361c651964e4e
Signed-off-by: Ch Ganesh Kumar <chganesh@codeaurora.org>
Audio event is wrongly notified during pre_panel_off event.
Modify HDMI Audio event notification sequence so that audio
events are notified as expected.
CRs-Fixed: 2131442
Change-Id: I5fb5d28cb0162f0c4bf97e29556b15d12e1ea8f1
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Add changes to reset basic_audio_support parameter
before parsing EDID on every new cable connection.
Change-Id: I52fef059830d950d4858d5bee3f76774426e6863
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Current Display Port driver is incorrectly parsing sink count
register (0x200) of DPCD. Made changes to parse it correctly
as per DP specification.
Change-Id: Ic858485f19f226f7b2d84f74c97170db8bebf822
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Initialize variables that are passed by reference, so that
they can be used safely afterwards, irrespective of the
called function actions.
Change-Id: Ib52c1cbc621913b21eb9520d305327ff5fd154fe
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Set the error code to be returned in case of failure.
Change-Id: I2cd818b21decb659de74fde1ac5c667d8606420e
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Initialize local variable desc being zeroed to fix
compiler uninitialized warning.
Change-Id: I2a109e65bfd13ddc94d4b6e465d07c3a1cc0cd34
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
Initialize variables that are passed by reference, so that
they can be used safely afterwards, irrespective of the
called function actions.
Change-Id: Ib95f3aa3077d6ef7aaaabcfc6c882790b6406793
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Configure all I2C instances of SDM660, MSM8996 and MSM8998 for
SW bit banging based bus recovery mechanism. HW recovery may
not work as expected when HW samples the data line and finds
it low during particular clocking period of the recovery.
Use SW bit banging instead, where SW generate clock pulses and
sniff data line until data line is released by the slave.
Signed-off-by: Shrey Vijay <shreyv@codeaurora.org>
Change-Id: Ia0ed92cd0d88df04a17a295f23970940dab3da03
Pointer should be checked after returning from function or being
passed from other function. So add checker for this to avoid NULL
pointer dereference.
Change-Id: Ie86f47230b50433e08259ee5f6bbb52bedf749b1
CRs-Fixed: 2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Local variable in function should be initialized before using it.
Change-Id: I061b10913182ed11b7a8cdb1baab900ac7e10ea6
CRs-Fixed: 2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Add checker to confirm the pointer is not NULL first, to avoid
NULL pointer dereference happens.
Change-Id: Id9060725037be235303bbc0a82d91d3d2008245c
CRs-Fixed: 2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Local variable in function should be initialized before using it.
Change-Id: I132033fa650cdacae3c8b2a98b8a593d159fe967
CRs-Fixed: 2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Add a bracket to fix the device instance for the subsystem_notif_virt
device.
Change-Id: Ib114a6d520aafbbcb0886dcf987d0509af80b636
Signed-off-by: Anant Goel <anantg@codeaurora.org>
If the CLK_SET_RATE_PARENT flag for the mmss_mdss_byte_intf_div_clk
divider is set re-calculation of dividers in DSI byte clock path takes
place which causes both the byte clock and byte interface clock to be
set to the same value.
Change-Id: Ia30c8070ec5c451a12f29e983089a7a2bbe6a8b3
Signed-off-by: Rashi Bindra <rbindra@codeaurora.org>
The SD card specification allows cards to error out a SWITCH command
where the requested function in a group is not supported. The spec
provides for a set of capabilities which indicate which functions are
supported.
In the case of the power limit, requesting an unsupported power level
via the SWITCH command fails, resulting in the power level remaining at
the power-on default of 0.72W, even though the host and card may support
higher powers levels.
This has been seen with SanDisk 8GB cards, which support the default
0.72W and 1.44W (200mA and 400mA) in combination with an iMX6 host,
supporting up to 2.88W (800mA). This currently causes us to try to set
a power limit function value of '3' (2.88W) which the card errors out
on, and thereby causes the power level to remain at 0.72W rather than
the desired 1.44W.
Arrange to limit the selected current limit by the capabilities reported
by the card to avoid the SWITCH command failing. Select the highest
current limit that the host and card combination support.
Change-Id: I7fbd035cdc606946e997fa4671ec5683acd3ed1b
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fixes: a39ca6ae0a ("mmc: core: Simplify and fix
for SD switch processing")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit: d9812780a020bcec44565b5950b2a8b31afb5545
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Header entry deleted but same entry pointer using in
routing table not updated. Added checks to confirm
header entry present or not before using it to avoid
null pointer dereference.
Change-Id: Id1d844c60b2dcb0cc7cf18352b78d62fe5a89347
Acked-by: Ashok Vuyyuru <avuyyuru@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Initialize DRM/KMS enumeration properties to the first
defined value rather than 0 since enumeration properties
are meant to store the actual value rather than simply
an enumeration index.
Change-Id: I23dd62308a2d3a45c763090b6f0557634ed49d63
Signed-off-by: Clarence Ip <cip@codeaurora.org>
Remove additional release fence offset to fix deadlock between
graphics and display when only two buffers are used.
Change-Id: Ifc94dae28484e13fae6cb9a7dfd19c1cb13c7c20
Signed-off-by: Camus Wong <camusw@codeaurora.org>
Check for debugfs ops buf size passed before reading
to eliminate the possibility of reading out of bounds.
Change-Id: I28fd60ce93256b6b0bad62b449092a891cc15463
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
The non-bmi targets do need to load firmware from the
driver and is loaded by other procedure.
Since, utf.bin file is not needed, this change skips parsing
and loading of the same.
Change-Id: Id7cc0b1cd75f813c1b6c762685d8806a30ba8295
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Fix repeated reg phy stream issue in loopback driver
which cause audio dsp calibration failure due to
rtac device could not remove successfully.
Change-Id: Ifa1b9cd579bc313d4addc00d48a8b4b636181220
Signed-off-by: Cong Tang <congt@codeaurora.org>
Display thread processes the work assigned by HAL for
screen update. Current logic selects the thread priority
to default and causes the frame drop. This patch moves
the display thread to realtime priority to process the display
work items at realtime. Event thread must follow the
display thread priority to avoid frame_pending counters
beyond 2.
Change-Id: I9154b749550cee52da1d16d22a8418676325e769
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Add shutdown sequence in msm driver to turn off
all connectors/bridge gracefully. That will allow
the graceful shutdown for dsi panel.
Change-Id: I055bd57a45706478c785b7a3c41bf7623dd8d2e7
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Add the missing CDM block length parsed by the hardware catalog
into the hardware block data structure so that the debug dump
region can be properly registered.
Change-Id: I395164960484ede34a781785b4ed0e2a60ef0e50
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
The tile format table is missing few ubwc equivalent formats.
Add those missing formats to the tile format table.
Change-Id: Ie5392f820a5a5f3a94405ab73d3c3f8a7efa0f9f
Signed-off-by: Alan Kwong <akwong@codeaurora.org>
