Possible user information leaks in post processing LUT get
functions are fixed by properly copying user data.
Change-Id: I529f74a79e5857902177c8054d136b4544370be2
Signed-off-by: Sravan Kumar D.V.N <sravank1@codeaurora.org>
This change adds YUV format support for HDMI.
Also, chooses the best mode for turning on the
sink based on sink source capabilities. This
can be either RGB or YUV. For YUV formats adjust
the pixel clock and also configure the relevant
hardware blocks in SDE.
Change-Id: I48a36a991c194badb3ddca4bbf5bcbc21d838b8f
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Check if the TV supports deep color and adjust the
pixel clock accordingly before setting the mode. Also
make sure that this pixel clock is within the limits
of the sink.
Change-Id: I3c44c06ea54b6c49e19c8c41d693000f7c3feeb7
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Change the array index 'i' of pwrlevels[] to unsigned int, which can't be
decremented beyond zero.
Change-Id: I9b646fccf03437f6facf0d5938f097916d13d2f2
Signed-off-by: Venkateswara Rao Tadikonda <vtadik@codeaurora.org>
Detect frame out of sync based on interfaces, instead of
time to avoid synchronization issues.
Change-Id: I76d9d5a3c83ed8017607fd452e5503260cad659a
Signed-off-by: Ramesh V <ramev@codeaurora.org>
xHCI specs revision 1.1 mentions that if Compliance Transition
Capability (CTC) flag is set, then xHC supports software control
of the transition to Compliance mode. For this, we need to write
a value of 10 to Port Link State(PLS) field of PORTSC register
during dwc3_otg_start_host time after the xhci platform device
has been added. Then the link transitions to compliance state
on detection of first LFPS timeout.
Steps to enable compliance transition:
1. Do not connect host cable
2. echo y > /sys/devices/soc/a800000.ssusb/xhci_link_compliance
3. Connect host cable with breakout fixture and start testing
Steps to disable compliance transition:
1. Disconnect the host cable
2. echo n > /sys/devices/soc/a800000.ssusb/xhci_link_compliance
3. Connect host cable
Change-Id: I73225ccad105414d3ebd60f95138b9ecf65005d4
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
During port reconfiguration, reallocating internal
buffers adds to the reconfiguration delay. This change
ensures that maximum supported size of internal
buffers are allocated to avoid reallocation during
port reconfiguration.
Remove the RECONFIG_HINT command as userspace client
does not use this command.
CRs-Fixed: 2071064
Change-Id: I66b5b472f08b9264841dae4f2339f85e3ba879ff
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Add MM front end DAI links to support concurrent interactive
streams
Change-Id: I9cd95d855f2ddc3345453807e4be235c430b9ef3
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Add changes to register and receive parameters for pan/scale
and downmix operations.
Change-Id: If0e747304595f9ed3bd19b25e3f4eab2db382a67
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Add support for set params on ASM/ADM for MFC and
Volume modules. Make PSPD mitrix set param api generic.
Change-Id: I75a5b9e3fd2316b75be41439848f89190944bc36
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
No need of having high number of tty port for HSUART which just wastes
resources. Make this optimal based on the use cases.
Change-Id: If82fc1a3457fae7503d7557817ca776f19027da7
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Temp in trace_temp_notification is not divided with
scaling factor while cpu_node->temp is. Use temp after
scale for better log understanding.
Change-Id: Iadf4a1c39211651fee67cc18f68a65785f28fa58
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
Enables pmic gpio13 on msm8996 so that the neutrino driver can toggle it
during probe to bring the hardware out of reset. This is required for
suspend/resume when neutrino resx is disconnected from pcie_reset.
Change-Id: I21a8e556903756ed39abdde5a17e8b6d353c0504
Signed-off-by: Philippe Gravel <pgravel@codeaurora.org>
In __ip6_datagram_connect(), reset socket->socket_v6_daddr and inet->dport if
error occurs.
In udp_v6_early_demux(), check for socket_state to make sure it is in
TCP_ESTABLISHED state.
Together, it makes sure unconnected UDP socket won't be considered as a
valid candidate for early demux.
v3: add TCP_ESTABLISHED state check in udp_v6_early_demux()
v2: fix compilation error
CRs-Fixed: 2057820
Change-Id: Ifa9c2ddfaa5b51d4082b7b1dd8a5d03b3c290705
Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-commit: 85cb73ff9b74785a7fc752875d7f0fe17ca3ea7c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[subashab@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
David Ahern reported that "net: ipv6: Add early demux
handler for UDP unicast" breaks udp_l3mdev_accept=0 since early
demux for IPv6 UDP was doing a generic socket lookup which does not
require an exact match. Fix this by making UDPv6 early demux match
connected sockets only.
v1->v2: Take reference to socket after match as suggested by Eric
v2->v3: Add comment before break
CRs-Fixed: 2057820
Change-Id: Ief9fd4a51561b7a49efa3780ebe8dc3632bdfa1c
Fixes: 5425077d73e0c ("net: ipv6: Add early demux handler for UDP unicast")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-commit: 0bd84065b19bca12f07f288c8ea470e2c1b2de7a
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[subashab@codeaurora.org: resolve trivial merge conflicts]
SDE rotator cannot accept 0 value for traffic shaping. This fix is to
limit the minimum traffic shaping value to be 1.
CRs-Fixed: 2074997
Change-Id: I5c96d600d77a5bfe09fe2667b914cb498371391e
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Add initial set of device tree files for msm8998-9x55 target.
Change-Id: Icd2d5555a2b48cd935fc4ced54c9a061f3a62a10
Signed-off-by: Mohammed Khajapasha <mkhaja@codeaurora.org>
Add DT entry to use wlan carveout region for WLAN MSA0.
CRs-Fixed: 2075205
Change-Id: I86d90247155884488e639bd8d487157524b977e9
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
