Commit graph

54194 commits

Author SHA1 Message Date
Will Newton
48a0b7404d arch/um/drivers/line.c: safely iterate over list of winch handlers
unregister_winch() should use list_for_each_safe(), as it can delete from
the list.

Signed-off-by: Will Newton <will.newton@gmail.com>
Cc: richard -rw- weinberger <richard.weinberger@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:07 -08:00
Richard Weinberger
94295e2305 um: mark CONFIG_HIGHMEM as broken
Currently CONFIG_HIGHMEM is broken on User Mode Linux.  I'm not sure if it
worked ever.

It doesn't compile and this breaks randomconfig testing.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:07 -08:00
Tony Lindgren
7d4ca85a53 omap4: Fix ULPI PHY init for ES1.0 SDP
Commit 6aa85a5ae6 (omap4: 4430sdp:
enable the ehci port on 4430SDP) added code to enable EHCI
support on 4430sdp board.

Looks like the ULPI pin does not seem to be muxed properly on ES1.0
SDP and this causes the system to reboot when the ULPI PHY is
enabled.

Fix this by muxing the pin, this is the same setting for
both ES1.0 and ES2.0. Also add checking for gpio_request.

Cc: Keshava Munegowda <keshava_mgowda@ti.com
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-13 08:01:41 -08:00
Arnaud Patard (Rtp)
dd027b00eb mx51: add support for pwm
This patch is adding support for pwm1 and pwm2 devices found
on mx51.
[ this patch has been tested with pwm-backlight driver ]

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 14:03:58 +01:00
Arnaud Patard (Rtp)
01c0761cc1 Fix pwm-related build failure
Commit 076762aa52 is adding a macro whis is
calling imx_add_mxc_pwm() but gives it 2 parameters while it's taking only
one parameters.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 14:03:58 +01:00
Lennert Buytenhek
4a87bac4c9 ARM: ecard: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13 12:26:17 +01:00
Lennert Buytenhek
f64305a68b ARM: core irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 12:26:17 +01:00
Lennert Buytenhek
e2a93ecc7f ARM: Use genirq definitions from kernel/irq/Kconfig.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 12:25:18 +01:00
Paul Mundt
8b6f08eaef Merge branch 'sh/alphaproject' into sh-latest 2011-01-13 18:38:28 +09:00
Paul Mundt
8a453cac94 sh: Add support for AP-SH4AD-0A board.
This adds preliminary support for the alpha project AP-SH4AD-0A reference
platform (SH7786 based).

Additional platform information available at:

	http://www.apnet.co.jp/product/superh/ap-sh4ad-0a.html

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:36:21 +09:00
Paul Mundt
bc34b0850b sh: Add support for AP-SH4A-3A board.
This adds preliminary support for the alpha project AP-SH4A-3A reference
platform (SH7785 based).

Additional paltform information available at:

	http://www.apnet.co.jp/product/superh/ap-sh4a-3a.html

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:32:42 +09:00
Paul Mundt
704bf317fd sh: Add a new mach type for alpha project boards.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:31:25 +09:00
Yong Shen
3b18c34928 ARM i.MX53 enable LOCO board bootup
1. Add Kconfig and Makefile entries
2. Add board definition
3. enable uart and fec for LOCO board

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:49 +01:00
Yong Shen
6f12ea4e54 ARM i.MX53 enable SMD board bootup
1. Add Kconfig and Makefile entries
2. Add board definition
3. enable uart and fec for SMD board

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:49 +01:00
Yong Shen
65e2e9c8c3 ARM: i.MX53 EVK: add spi nor device
add spi board information for spi nor device

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Yong Shen
6b2837dc6d ARM: i.MX53 EVK: add ecspi IOMUX setting
add ecspi IOMUX setting, also fix a bug of chip select pin order

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Yong Shen
467ae1e47f ARM: i.MX53: add IOMUX pad for ecspi
Add IOMUX pad entry for ecspi

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Takashi Iwai
6db9a0f326 Merge branch 'topic/asoc' into for-linus 2011-01-13 08:37:24 +01:00
Magnus Damm
ceb50f33d4 ARM: mach-shmobile: Kill off unused !gpio_is_valid() case
The Card Detect GPIOs used on AP4EVB and Mackerel are
alwayws valid, so kill off the unused !gpio_is_valid()
case.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 15:22:04 +09:00
Paul Mundt
ef7fc9026f Merge branch 'common/serial-rework' into sh-latest 2011-01-13 15:21:27 +09:00
Magnus Damm
fac6c2a891 sh: sh7372 SH4AL-DSP probe support
Add probe support for the sh7372 SH4AL-DSP core.

The most common use case for this is when the system
boots from the ARM core in the sh7372 and uses the
SH core for application offload as a slave CPU.

May also be used to boot the sh7372 from the SH core.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 15:20:40 +09:00
Paul Mundt
f43dc23d5e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework
Conflicts:
	arch/sh/kernel/cpu/sh2/setup-sh7619.c
	arch/sh/kernel/cpu/sh2a/setup-mxg.c
	arch/sh/kernel/cpu/sh2a/setup-sh7201.c
	arch/sh/kernel/cpu/sh2a/setup-sh7203.c
	arch/sh/kernel/cpu/sh2a/setup-sh7206.c
	arch/sh/kernel/cpu/sh3/setup-sh7705.c
	arch/sh/kernel/cpu/sh3/setup-sh770x.c
	arch/sh/kernel/cpu/sh3/setup-sh7710.c
	arch/sh/kernel/cpu/sh3/setup-sh7720.c
	arch/sh/kernel/cpu/sh4/setup-sh4-202.c
	arch/sh/kernel/cpu/sh4/setup-sh7750.c
	arch/sh/kernel/cpu/sh4/setup-sh7760.c
	arch/sh/kernel/cpu/sh4a/setup-sh7343.c
	arch/sh/kernel/cpu/sh4a/setup-sh7366.c
	arch/sh/kernel/cpu/sh4a/setup-sh7722.c
	arch/sh/kernel/cpu/sh4a/setup-sh7723.c
	arch/sh/kernel/cpu/sh4a/setup-sh7724.c
	arch/sh/kernel/cpu/sh4a/setup-sh7763.c
	arch/sh/kernel/cpu/sh4a/setup-sh7770.c
	arch/sh/kernel/cpu/sh4a/setup-sh7780.c
	arch/sh/kernel/cpu/sh4a/setup-sh7785.c
	arch/sh/kernel/cpu/sh4a/setup-sh7786.c
	arch/sh/kernel/cpu/sh4a/setup-shx3.c
	arch/sh/kernel/cpu/sh5/setup-sh5.c
	drivers/serial/sh-sci.c
	drivers/serial/sh-sci.h
	include/linux/serial_sci.h
2011-01-13 15:06:28 +09:00
Donguk Ryu
ccbc87693d ARM: S5PV310: Add Support System MMU
This patch adds support System MMU for S5PV310 and S5PC210.

Signed-off-by: Donguk Ryu <du.ryu@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: changed SYSMMU config name]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-13 13:40:29 +09:00
Donguk Ryu
b55f685e97 ARM: S5P: Add Support System MMU
This patch adds support System MMU which supports address transition
from virtual address to physical address. Basically, each hardware
block is connected System MMU block can use directly vitrual address
when it accesses physical memory not using physical address.

Signed-off-by: Donguk Ryu <du.ryu@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: removed useless codes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-13 13:35:31 +09:00
Al Viro
c74a1cbb3c pass default dentry_operations to mount_pseudo()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12 20:03:43 -05:00
Len Brown
43952886f0 Merge branch 'cpuidle-perf-events' into idle-test 2011-01-12 18:06:19 -05:00
Len Brown
56dbed129d Merge branch 'linus' into idle-test 2011-01-12 18:06:06 -05:00
Thomas Renninger
f77cfe4ea2 cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
Currently intel_idle and acpi_idle driver show double cpu_idle "exit idle"
events -> this patch fixes it and makes cpu_idle events throwing less complex.

It also introduces cpu_idle events for all architectures which use
the cpuidle subsystem, namely:
  - arch/arm/mach-at91/cpuidle.c
  - arch/arm/mach-davinci/cpuidle.c
  - arch/arm/mach-kirkwood/cpuidle.c
  - arch/arm/mach-omap2/cpuidle34xx.c
  - arch/drivers/acpi/processor_idle.c (for all cases, not only mwait)
  - arch/x86/kernel/process.c (did throw events before, but was a mess)
  - drivers/idle/intel_idle.c (did throw events before)

Convention should be:
Fire cpu_idle events inside the current pm_idle function (not somewhere
down the the callee tree) to keep things easy.

Current possible pm_idle functions in X86:
c1e_idle, poll_idle, cpuidle_idle_call, mwait_idle, default_idle
-> this is really easy is now.

This affects userspace:
The type field of the cpu_idle power event can now direclty get
mapped to:
/sys/devices/system/cpu/cpuX/cpuidle/stateX/{name,desc,usage,time,...}
instead of throwing very CPU/mwait specific values.
This change is not visible for the intel_idle driver.
For the acpi_idle driver it should only be visible if the vendor
misses out C-states in his BIOS.
Another (perf timechart) patch reads out cpuidle info of cpu_idle
events from:
/sys/.../cpuidle/stateX/*, then the cpuidle events are mapped
to the correct C-/cpuidle state again, even if e.g. vendors miss
out C-states in their BIOS and for example only export C1 and C3.
-> everything is fine.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Robert Schoene <robert.schoene@tu-dresden.de>
CC: Jean Pihet <j-pihet@ti.com>
CC: Arjan van de Ven <arjan@linux.intel.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: linux-pm@lists.linux-foundation.org
CC: linux-acpi@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-perf-users@vger.kernel.org
CC: linux-omap@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 18:05:16 -05:00
Linus Walleij
0adfca6ff2 ARM: 6622/1: fix dma_unmap_sg() documentation
The kerneldoc for this function is at odds with the DMA-API
document, which holds, so fix it.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-12 19:42:13 +00:00
Tony Luck
dff0092bcd [IA64] Fix format warning in arch/ia64/kernel/acpi.c
arch/ia64/kernel/acpi.c:481: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long unsigned int’

Introduced by commit 05f2f274c8
    [IA64] Avoid array overflow if there are too many cpus in SRAT table

Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-01-12 11:02:43 -08:00
Len Brown
5392083748 cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 12:47:34 -05:00
Len Brown
03d8b08351 SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW
set but not checked.

Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 12:47:32 -05:00
Thomas Renninger
d18960494f ACPI, intel_idle: Cleanup idle= internal variables
Having four variables for the same thing:
  idle_halt, idle_nomwait, force_mwait and boot_option_idle_overrides
is rather confusing and unnecessary complex.

if idle= boot param is passed, only set up one variable:
boot_option_idle_overrides

Introduces following functional changes/fixes:
  - intel_idle driver does not register if any idle=xy
    boot param is passed.
  - processor_idle.c will also not register a cpuidle driver
    and get active if idle=halt is passed.
    Before a cpuidle driver with one (C1, halt) state got registered
    Now the default_idle function will be used which finally uses
    the same idle call to enter sleep state (safe_halt()), but
    without registering a whole cpuidle driver.

That means idle= param will always avoid cpuidle drivers to register
with one exception (same behavior as before):
idle=nomwait
may still register acpi_idle cpuidle driver, but C1 will not use
mwait, but hlt. This can be a workaround for IO based deeper sleep
states where C1 mwait causes problems.

Signed-off-by: Thomas Renninger <trenn@suse.de>
cc: x86@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 12:47:30 -05:00
Yong Shen
57c78e359a Change the register name definitions for mc13783
To make mc13783 and mc13892 share code, the register names should be
changed to fit the new macro definitions in the comming patch.

Signed-off-by: Yong Shen <yong.shen@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12 14:33:03 +00:00
Bengt Jonsson
a1e516e3a5 mach-ux500: Updated and connected ab8500 regulator board configuration
The ab8500 regulator board configuration is updated and put in an
array which can easily be used in the MFD board configuration. The
regulator board configuration is also added to the MFD
configuration in this patch.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12 14:33:03 +00:00
Rabin Vincent
e163d529ad ARM: 6621/1: bitops: remove condition code clobber for CLZ
The CLZ instruction does not alter the condition flags, so remove the
"cc" clobber from the inline asm for fls().

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-12 14:22:25 +00:00
Alexander Holler
22eeb8f6e0 ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used
When CONFIG_CMDLINE_FORCE is used, the warning

  Ignoring unrecognised tag 0x54410009

was displayed. Change this to

  Ignoring tag cmdline (using the default kernel command line)

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-12 14:22:25 +00:00
Philippe De Muyter
88cce42762 watchdog: Add MCF548x watchdog driver.
Add watchdog driver for MCF548x.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:35 +00:00
Fabio Estevam
a5fcfef0b8 ARM: mx5: dynamically allocate imx-keypad devices
Add support for dynamical allocation of imx-keypad on mx5 platform.

After moving to dynamically registration of the keypad, the keypad clock
name needs to change accordingly.

The reason is that the original mx5 keypad platform_device id was 0,
now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c.

Tested keypad successfully on a MX51_3DS board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12 14:50:45 +01:00
Fabio Estevam
076762aa52 ARM: mx5: dynamically allocate pwm devices
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12 14:50:09 +01:00
Shawn Guo
dbc4245bb5 ARM: mxs: Change duart device to use amba-pl011
The mxs duart is actually an amba-pl011 device. This commit changes
the duart device code to dynamically allocate amba-pl011 device,
so that drivers/serial/amba-pl011.c can be used on mxs.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12 14:47:15 +01:00
Avi Kivity
e5c3014282 KVM: Initialize fpu state in preemptible context
init_fpu() (which is indirectly called by the fpu switching code) assumes
it is in process context.  Rather than makeing init_fpu() use an atomic
allocation, which can cause a task to be killed, make sure the fpu is
already initialized when we enter the run loop.

KVM-Stable-Tag.
Reported-and-tested-by: Kirill A. Shutemov <kas@openvz.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 12:02:26 +02:00
Len Brown
03b6e6e58d Merge branch 'apei' into release 2011-01-12 05:02:22 -05:00
Gleb Natapov
444e863d13 KVM: VMX: when entering real mode align segment base to 16 bytes
VMX checks that base is equal segment shifted 4 bits left. Otherwise
guest entry fails.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:20 +02:00
Xiao Guangrong
f8e453b00c KVM: MMU: handle 'map_writable' in set_spte() function
Move the operation of 'writable' to set_spte() to clean up code

[avi: remove unneeded booleanification]

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:19 +02:00
Xiao Guangrong
b034cf0105 KVM: MMU: audit: allow audit more guests at the same time
It only allows to audit one guest in the system since:
- 'audit_point' is a glob variable
- mmu_audit_disable() is called in kvm_mmu_destroy(), so audit is disabled
  after a guest exited

this patch fix those issues then allow to audit more guests at the same time

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:17 +02:00
Avi Kivity
aff48baa34 KVM: Fetch guest cr3 from hardware on demand
Instead of syncing the guest cr3 every exit, which is expensince on vmx
with ept enabled, sync it only on demand.

[sheng: fix incorrect cr3 seen by Windows XP]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:16 +02:00
Avi Kivity
9f8fe5043f KVM: Replace reads of vcpu->arch.cr3 by an accessor
This allows us to keep cr3 in the VMCS, later on.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:15 +02:00
Marcelo Tosatti
e49146dce8 KVM: MMU: only write protect mappings at pagetable level
If a pagetable contains a writeable large spte, all of its sptes will be
write protected, including non-leaf ones, leading to endless pagefaults.

Do not write protect pages above PT_PAGE_TABLE_LEVEL, as the spte fault
paths assume non-leaf sptes are writable.

Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:13 +02:00
Avi Kivity
16d8f72f70 KVM: VMX: Correct asm constraint in vmcs_load()/vmcs_clear()
'error' is byte sized, so use a byte register constraint.

Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:12 +02:00