commit 3be23274755ee85771270a23af7691dc9b3a95db upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cfffc9d4d3786d3b496a021d7224e06328bac7d upstream.
This is a hold over from before the struct device conversion.
- All prints should be using &chip->dev, which is the Linux
standard. This changes prints to use tpm0 as the device name,
not the PnP/etc ID.
- The few places involving sysfs/modules that really do need the
parent just use chip->dev.parent instead
- We no longer need to get_device(pdev) in any places since it is no
longer used by any of the code. The kref on the parent is held
by the device core during device_add and dropped in device_del
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4816edfe706497a8525480c1685ceb9871bc118 upstream.
Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.
Fixes: 0fe5480303 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b0612b04090e416828c0dd5ed197b0913d834a0 upstream.
The result must be converted from BE byte order, which is used by the
TPM2 protocol. This has not popped out because tpm2_get_tpm_pt() has
been only used for probing.
Fixes: 7a1d7e6dd7 ("tpm: TPM 2.0 baseline support")
Change-Id: I7d71cd379b1a3b7659d20a1b6008216762596590
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'migratable' flag was not added to the key payload. This patch
fixes the problem.
Fixes: 0fe5480303 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <PeterHuewe@gmx.de>
Added tpm_trusted_seal() and tpm_trusted_unseal() API for sealing
trusted keys.
This patch implements basic sealing and unsealing functionality for
TPM 2.0:
* Seal with a parent key using a 20 byte auth value.
* Unseal with a parent key using a 20 byte auth value.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
If during transmission system error was returned, the logic was to
incorrectly deduce that chip is a TPM 1.x chip. This patch fixes this
issue. Also, this patch changes probing so that message tag is used as the
measure for TPM 2.x, which should be much more stable. A separate function
called tpm2_probe() is encapsulated because it can be used with any
chipset.
Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Fixed suspend/resume paths for TPM 2.0 and consolidated all the
associated code to the tpm_pm_suspend() and tpm_pm_resume()
functions. Resume path should be handled by the firmware, i.e.
Startup(CLEAR) for hibernate and Startup(STATE) for suspend.
There might be some non-PC embedded devices in the future where
Startup() is not the handled by the FW but fixing the code for
those IMHO should be postponed until there is hardware available
to test the fixes although extra Startup in the driver code is
essentially a NOP.
Added Shutdown(CLEAR) to the remove paths of TIS and CRB drivers.
Changed tpm2_shutdown() to a void function because there isn't
much you can do except print an error message if this fails with
a system error.
Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
[phuewe: both did send TPM_Shutdown on resume which 'disables' the TPM
and did not send TPM2_Shutdown on teardown which leads some TPM2.0 to
believe there was an attack (no TPM2_Shutdown = no orderly shutdown =
attack)]
Reported-by: Peter Hüwe <PeterHuewe@gmx.de>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
TPM 2.0 devices are separated by adding a field 'flags' to struct
tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them.
This patch adds the following internal functions:
- tpm2_get_random()
- tpm2_get_tpm_pt()
- tpm2_pcr_extend()
- tpm2_pcr_read()
- tpm2_startup()
Additionally, the following exported functions are implemented for
implementing TPM 2.0 device drivers:
- tpm2_do_selftest()
- tpm2_calc_ordinal_durations()
- tpm2_gen_interrupt()
The existing functions that are exported for the use for existing
subsystems have been changed to check the flags field in struct
tpm_chip and use appropriate TPM 2.0 counterpart if
TPM_CHIP_FLAG_TPM2 is est.
The code for tpm2_calc_ordinal_duration() and tpm2_startup() were
originally written by Will Arthur.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Will Arthur <will.c.arthur@intel.com>
Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Tested-by: Peter Huewe <peterhuewe@gmx.de>
[phuewe: Fixed copy paste error * 2]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
