With more than two switches in a hierarchy, it becomes necessary to
describe multi-hop routes between switches. The current binding does
not allow this, although the older platform_data did. Extend the link
property to be a list rather than a single phandle to a remote switch.
It is then possible to express that a port should be used to reach
more than one switch and the switch maybe more than one hop away.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Simplify port-specific macros by eliminating explicit comparison
with 0. More importantly, enclose formal parameter in parens to
eliminate the risk of an operator precedence surprise.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Recent changes to igb_probe_vfs() could lead to the PF holding onto all
of the queues. Reorder igb_probe_vfs() to be before
gb_init_queue_configuration() and add some more error checking.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In error handling code of igb_probe, the memory adapter->shadow_vfta
allocated by kcalloc in igb_sw_init is not freed. So when register_netdev
or igb_init_i2c is failed, a memory leak will occur.
This patch adds kfree to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When e1000e_setup_rx_resources is failed in e1000_open,
e1000e_free_tx_resources in "err_setup_rx" segment is executed.
"writel(0, tx_ring->head)" statement in e1000_clean_tx_ring
in e1000e_free_tx_resources will cause a null poonter dereference(crash),
because "tx_ring->head" is only assigned in e1000_configure_tx
in e1000_configure, but it is after e1000e_setup_rx_resources.
This patch moves head/tail register writing to e1000_configure_tx/rx,
which can fix this problem. It is inspired by igb_configure_tx_ring
in the igb driver.
Specially, thank Alexander Duyck for his valuable suggestion.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When igb_init_interrupt_scheme in igb_sriov_reinit is failed, the lock
acquired by rtnl_lock() is not released, which causes a deadlock.
This patch adds rtnl_unlock() in error handling to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When pci_dma_mapping_error in e100_xmit_prepare is failed, the skb buffer
allocated by netdev_alloc_skb_ip_align in e100_rx_alloc_skb is not
released, which causes a possible resource leak.
This patch adds error handling code to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The driver lacks the check of nic->cbs_pool after pci_pool_create
in e100_probe. When this function is failed, a null pointer dereference
occurs when pci_pool_alloc uses nic->cbs_pool in e100_alloc_cbs.
This patch adds a check and related error handling code to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the .remove() callback for a PF is called, SR-IOV support for the
device is disabled, which requires unbinding and removing the VFs.
The VFs may be in-use either by the host kernel or userspace, such as
assigned to a VM through vfio-pci. In this latter case, the VFs may
be removed either by shutting down the VM or hot-unplugging the
devices from the VM. Unfortunately in the case of a Windows 2012 R2
guest, hot-unplug is broken due to the ordering of the PF driver
teardown. Disabling SR-IOV prior to unregister_netdev() avoids this
issue.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds support for Marvell PHY 1512 (required for I354).
Submitted by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In addition to interrupt driven target time output events, the i210
also has two programmable clock outputs. These clocks support periods
between 16 nanoseconds and 140 milliseconds. This patch implements
the periodic output function using the clock outputs when possible,
falling back to the target time for longer periods.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
During driver probing the following code path is triggered.
igb_probe
->igb_sw_init
->igb_probe_vfs
->igb_pci_enable_sriov
->igb_sriov_reinit
Doing the SR-IOV re-init is not necessary during probing since we're
starting from scratch. Here we can call igb_enable_sriov() right away.
Running igb_sriov_reinit() during igb_probe() also seems to cause
occasional packet loss on some onboard 82576 NICs. Reproduced on
Dell and HP servers with onboard 82576 NICs.
Example:
Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
Subsystem: Dell Device [1028:0481]
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is
set if adapter->rss_queues exceeds half of max_rss_queues in
igb_init_queue_configuration().
On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of
queues exceeds half of max_combined in igb_set_channels() when changing
the number of queues by "ethtool -L".
In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size
of adapter->msix_entries[], an overflow can occur in
igb_set_interrupt_capability(), which in turn leads to an oops.
Fix this problem as follows:
- When changing the number of queues by "ethtool -L", set
IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver.
- When increasing the size of q_vector, reallocate it appropriately.
(With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.)
Another possible way to fix this problem is to cap the queues at its
initial number, which is the number of the initial online cpus. But this
is not the optimal way because we cannot increase queues when another
cpu becomes online.
Note that before commit cd14ef54d2 ("igb: Change to use statically
allocated array for MSIx entries"), this problem did not cause oops
but just made the number of queues become 1 because of entering msi_only
mode in igb_set_interrupt_capability().
Fixes: 907b783579 ("igb: Add ethtool support to configure number of channels")
CC: stable <stable@vger.kernel.org>
Signed-off-by: Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We recently found issue with dma_request_slave_channel() API causing
privatecnt value to go bad. This is fixed by balancing the privatecnt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nKrX
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.2-rc8' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
"We recently found issue with dma_request_slave_channel() API causing
privatecnt value to go bad. This is fixed by balancing the privatecnt"
* tag 'dmaengine-fix-4.2-rc8' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: fix balance of privatecnt inc/dec operations
Phil Sutter says:
====================
net: Convert drivers to IFF_NO_QUEUE and cleanup afterwards
This series converts in-tree users away from the old and deprecated
'tx_queue_len = 0' idiom, adds a warning to notify out-of-tree driver
maintainers that there is need for action on their behalf and finally drops any
workarounds in scheduling algorithm implementations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Those were all workarounds for the formerly double meaning of
tx_queue_len, which broke scheduling algorithms if untreated.
Now that all in-tree drivers have been converted away from setting
tx_queue_len = 0, it should be safe to drop these workarounds for
categorically broken setups.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the introduction of IFF_NO_QUEUE, there is a better way for
drivers to indicate that no qdisc should be attached by default. Though,
the old convention can't be dropped since ignoring that setting would
break drivers still using it. Instead, add a warning so out-of-tree
driver maintainers get a chance to adjust their code before we finally
get rid of any special handling of tx_queue_len == 0.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Johnny Kim <johnny.kim@atmel.com>
Cc: Rachel Kim <rachel.kim@atmel.com>
Cc: Dean Lee <dean.lee@atmel.com>
Cc: Chris Park <chris.park@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the topology API is still in sufficient flux for changes to be
identified disable the use of the userspace ABI by adding #error
statements to the code, ensuring that nobody relies on the headers as
currently defined. It is expected that this change will be reverted for
v4.3.
Signed-off-by: Mark Brown <broonie@kernel.org>
Alex Deucher, Mark Rustad and Alexander Holler reported a regression
with the latest v4.2-rc4 kernel, which breaks some SATA controllers.
With multi-MSI capable SATA controllers, only the first port works,
all other ports time out when executing SATA commands.
This happens because the first argument to assign_irq_vector_policy()
is always the base linux irq number of the multi MSI interrupt block,
so all subsequent vector assignments operate on the base linux irq
number, so all MSI irqs are handled as the first irq number. Therefor
the other MSI irqs of a device are never set up correctly and never
fire.
Add the loop iterator to the base irq number so all vectors are
assigned correctly.
Fixes: b5dc8e6c21 "x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors"
Reported-and-tested-by: Alex Deucher <alexdeucher@gmail.com>
Reported-and-tested-by: Mark Rustad <mrustad@gmail.com>
Reported-and-tested-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1439911228-9880-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The routines in scsi_rpm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).
However, this assumption turns out to be wrong for things like the ses
driver. Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting. If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.
This patch fixes the problem by calling the block layer's runtime-PM
routines only if the device's driver really does have a runtime-PM
callback routine. Since ses doesn't define any such callbacks, the
crash won't occur.
This fixes Bugzilla #101371.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stanisław Pitucha <viraptor@gmail.com>
Reported-by: Ilan Cohen <ilanco@gmail.com>
Tested-by: Ilan Cohen <ilanco@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
We added changes in fnic driver patch 1.6.0.16 to acquire
io_req_lock in fnic_queuecommand() before issuing I/O so that io completion
is serialized. But when releasing the lock we check for the I/O flag and
this could be modified if IO abort occurs before I/O completion. In this case
we wont release the lock and causes deadlock in some scenerios. Using the
local variable to check the IO lock status will resolve the problem.
Fixes: 41df7b02db
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Pull drm fixes from Dave Airlie:
"These came in late last week, I wanted to look over the mst one before
forwarding, but it seems good.
Just three i915 and one MST fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Commit planes on each crtc separately.
drm/i915: calculate primary visibility changes instead of calling from set_config
drm/i915: Only dither on 6bpc panels
drm/dp/mst: Remove port after removing connector.
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV0uQxAAoJEC0Llv5uNjIBA3MQAKrYe0QQlty150wuXaJwys/1
CmdtcVSytafaCPchmPL4O73m8Z5kGv9yhktyY9dYGexMkgiqInzHRo3IWIO0eTFQ
83xrwdplxbv2j1gs6peNT5ojsXDVawiFcrAKbM3SXFyUTZCblnjPGXledmMH3S+f
L3cypj4j97HhyGnksm5kOiH+3LOfS/+JWW6LS9Z1/nEuehrykS1v5noUhgntlmTq
jy2BlocQxEKe89o1bbaG8s3BEL8l5O+Te4z7bhV0k/aX/jzcybQOf0bX+5nUswq/
YoZtHapd9vS6/z/dZiohDS4Db8HwqXjiFTgGhwu8lsxiI828pZlnBubNoSfsacyh
6UDXEqfP8bFcmWUf5vrG9eabxU008CBZ4pEuXHH/JV3DB9PRHVZ+bXtznMqzJtI0
1B0Mlc+iXB2sBhQqzMjinRM395cLipIhImriBfYDHoa/NiUIeZYTYwmwTdwWVXzh
d1OgtiqPRZMpWISON6/hcOARthOwj4per4Dieoy1vdyXhS2Fbz6edxIo4E2XW89C
AgWtJnsvZ1uTOhb/Ei6xiTtYEW9k8Dkb8i5SmcpZBNHAxLhD2SiNR4ZFLfUyluLB
eauZEDIcCoeCj+itYD4mguQlQHMlTcn+qaKXnWZWpTxUObkJpb2JUzaoyfJtka1F
ZrMX6X4dVmL6nJqL6rb7
=9i6F
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2015-08-18' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
lock_timer_base() cannot prevent the following :
CPU1 ( in __mod_timer()
timer->flags |= TIMER_MIGRATING;
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
// The next line clears TIMER_MIGRATING
timer->flags &= ~TIMER_BASEMASK;
CPU2 (in lock_timer_base())
see timer base is cpu0 base
spin_lock_irqsave(&base->lock, *flags);
if (timer->flags == tf)
return base; // oops, wrong base
timer->flags |= base->cpu // too late
We must write timer->flags in one go, otherwise we can fool other cpus.
Fixes: bc7a34b8b9 ("timer: Reduce timer migration overhead if disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Christopherson <jon@jons.org>
Cc: David Miller <davem@davemloft.net>
Cc: xen-devel@lists.xen.org
Cc: david.vrabel@citrix.com
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Link: http://lkml.kernel.org/r/1439831928.32680.11.camel@edumazet-glaptop2.roam.corp.google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
U-Boot is often used to boot the kernel on ARM boards, but uImage
is not built by "make all", so we are often inclined to do
"make all uImage" to generate DTBs, modules and uImage in a single
command, but we should notice a pitfall behind it. In fact,
"make all uImage" could generate an invalid uImage if it is run with
the parallel option (-j).
You can reproduce this problem with the following procedure:
[1] First, build "all" and "uImage" separately.
You will get a valid uImage
$ git clean -f -x -d
$ export CROSS_COMPILE=<your-tools-prefix>
$ make -s -j8 ARCH=arm multi_v7_defconfig
$ make -s -j8 ARCH=arm all
$ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 uImage
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CHK include/generated/timeconst.h
CHK include/generated/bounds.h
CHK include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
Kernel: arch/arm/boot/Image is ready
Kernel: arch/arm/boot/zImage is ready
UIMAGE arch/arm/boot/uImage
Image Name: Linux-4.2.0-rc5-00156-gdd2384a-d
Created: Sat Aug 8 23:21:35 2015
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6138648 Bytes = 5994.77 kB = 5.85 MB
Load Address: 80208000
Entry Point: 80208000
Image arch/arm/boot/uImage is ready
$ ls -l arch/arm/boot/*Image
-rwxrwxr-x 1 masahiro masahiro 13766656 Aug 8 23:20 arch/arm/boot/Image
-rw-rw-r-- 1 masahiro masahiro 6138712 Aug 8 23:21 arch/arm/boot/uImage
-rwxrwxr-x 1 masahiro masahiro 6138648 Aug 8 23:20 arch/arm/boot/zImage
[2] Update some source file(s)
$ touch init/main.c
[3] Then, re-build "all" and "uImage" simultaneously.
You will get an invalid uImage at random.
$ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 all uImage
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CHK include/generated/timeconst.h
CHK include/generated/bounds.h
CHK include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
CC init/main.o
CHK include/generated/compile.h
LD init/built-in.o
LINK vmlinux
LD vmlinux.o
MODPOST vmlinux.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
LD init/built-in.o
KSYM .tmp_kallsyms1.o
KSYM .tmp_kallsyms2.o
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
OBJCOPY arch/arm/boot/Image
Building modules, stage 2.
Kernel: arch/arm/boot/Image is ready
GZIP arch/arm/boot/compressed/piggy.gzip
AS arch/arm/boot/compressed/piggy.gzip.o
Kernel: arch/arm/boot/Image is ready
LD arch/arm/boot/compressed/vmlinux
GZIP arch/arm/boot/compressed/piggy.gzip
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
UIMAGE arch/arm/boot/uImage
Image Name: Linux-4.2.0-rc5-00156-gdd2384a-d
Created: Sat Aug 8 23:23:14 2015
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 26472 Bytes = 25.85 kB = 0.03 MB
Load Address: 80208000
Entry Point: 80208000
Image arch/arm/boot/uImage is ready
MODPOST 192 modules
AS arch/arm/boot/compressed/piggy.gzip.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
$ ls -l arch/arm/boot/*Image
-rwxrwxr-x 1 masahiro masahiro 13766656 Aug 8 23:23 arch/arm/boot/Image
-rw-rw-r-- 1 masahiro masahiro 26536 Aug 8 23:23 arch/arm/boot/uImage
-rwxrwxr-x 1 masahiro masahiro 6138648 Aug 8 23:23 arch/arm/boot/zImage
Please notice the uImage is extremely small when this issue is
encountered. Besides, "Kernel: arch/arm/boot/zImage is ready" is
displayed twice, before and after the uImage log.
The root cause of this is the race condition between zImage and
uImage. Actually, uImage depends on zImage, but the dependency
between the two is only described in arch/arm/boot/Makefile.
Because arch/arm/boot/Makefile is not included from the top-level
Makefile, it cannot know the dependency between zImage and uImage.
Consequently, when we run make with the parallel option, Kbuild
updates vmlinux first, and then two different threads descends into
the arch/arm/boot/Makefile almost at the same time, one for updating
zImage and the other for uImage. While one thread is re-generating
zImage, the other also tries to update zImage before creating uImage
on top of that. zImage is overwritten by the slower thread and then
uImage is created based on the half-written zImage.
This is the reason why "Kernel: arch/arm/boot/zImage is ready" is
displayed twice, and a broken uImage is created.
The same problem could happen on bootpImage.
This commit adds dependencies among Image, zImage, uImage, and
bootpImage to arch/arm/Makefile, which is included from the
top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The mmap semaphore should not be taken when page faults are disabled.
Since pagefault_disable() no longer disables preemption, we now need
to use faulthandler_disabled() in place of in_atomic().
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Matthew Fortune <Matthew.Fortune@imgtec.com> reports:
The genex.S file appears to mix the case of a macro between its definition and
use. A cut down example of this is below. The macro __build_clear_none has
lower case 'build' but ends up being instantiated with upper case BUILD. Can
this be fixed on master. It has been picked up by the LLVM integrated assembler
which is currently case sensitive. We are likely to fix the assembler as well
but the code is currently inconsistent in the kernel.
.macro __build_clear_none
.endm
.macro __BUILD_HANDLER exception handler clear verbose ext
.align 5
.globl handle_\exception; .align 2; .type handle_\exception, @function; .ent
handle_\exception, 0; handle_\exception: .frame $29, 184, $29
.set noat
.globl handle_\exception\ext; .type handle_\exception\ext, @function;
handle_\exception\ext:
__BUILD_clear_\clear
.endm
.macro BUILD_HANDLER exception handler clear verbose
__BUILD_HANDLER \exception \handler \clear \verbose _int
.endm
BUILD_HANDLER ftlb ftlb none silent
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
If PM is enabled but PM_SLEEP is disabled, the suspend/resume functions
are still unused and produce a compiler warning.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # 4.1+
