There is added a single callback for the l3 proto helper. The two
callbacks for the l4 protos are necessary because of the general
structure of a ctnetlink event, which is in short:
CTA_TUPLE_ORIG
<l3/l4-proto-attributes>
CTA_TUPLE_REPLY
<l3/l4-proto-attributes>
CTA_ID
...
CTA_PROTOINFO
<l4-proto-attributes>
CTA_TUPLE_MASTER
<l3/l4-proto-attributes>
Therefore the formular is
size := sizeof(generic-nlas) + 3 * sizeof(tuple_nlas) + sizeof(protoinfo_nlas)
Some of the NLAs are optional, e. g. CTA_TUPLE_MASTER, which is only
set if it's an expected connection. But the number of optional NLAs is
small enough to prevent netlink_trim() from reallocating if calculated
properly.
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
We use same not trivial helper function in four places. We can factorize it.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Using hlist_add_head() in nf_conntrack_set_hashsize() is quite dangerous.
Without any barrier, one CPU could see a loop while doing its lookup.
Its true new table cannot be seen by another cpu, but previous table is still
readable.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
net/netfilter/xt_LED.c:40: error: field netfilter_led_trigger has incomplete type
net/netfilter/xt_LED.c: In function led_timeout_callback:
net/netfilter/xt_LED.c:78: warning: unused variable ledinternal
net/netfilter/xt_LED.c: In function led_tg_check:
net/netfilter/xt_LED.c:102: error: implicit declaration of function led_trigger_register
net/netfilter/xt_LED.c: In function led_tg_destroy:
net/netfilter/xt_LED.c:135: error: implicit declaration of function led_trigger_unregister
Fix by adding a dependency on LED_TRIGGERS.
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: Subrata Modak <tosubrata@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Impact: cleanup
Add /** style comments around find_busiest_group(). Also add a few
explanatory comments.
This concludes the find_busiest_group() cleanup. The function is
now down to 72 lines from the original 313 lines.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091427.13992.18933.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create seperate helper functions to initialize the
power-savings-balance related variables, to update them and
to check if we have a scope for performing power-savings balance.
Add no-op inline functions for the !(CONFIG_SCHED_MC || CONFIG_SCHED_SMT)
case.
This will eliminate all the #ifdef jungle in find_busiest_group() and the
other helper functions.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091422.13992.73616.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, micro-optimization
We don't need to perform power_savings balance if either the
cpu is NOT_IDLE or if the sched_domain doesn't contain the
SD_POWERSAVINGS_BALANCE flag set.
Currently, we check for these conditions multiple number of
times, even though these variables don't change over the scope
of find_busiest_group().
Check once, and store the value in the already exiting
"power_savings_balance" variable.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091417.13992.2657.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all the imbalance calculation out of find_busiest_group()
through this helper function.
With this change, the structure of find_busiest_group() will be
as follows:
- update_sched_domain_statistics.
- check if imbalance exits.
- update imbalance and return busiest.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091411.13992.43293.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
We have two places in find_busiest_group() where we need to calculate
the minor imbalance before returning the busiest group. Encapsulate
this functionality into a seperate helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091406.13992.54316.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sd_lb_stats() to update the
various sched_domain related statistics in find_busiest_group().
With this we would have moved all the statistics computation out of
find_busiest_group().
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091401.13992.88737.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently we use a lot of local variables in find_busiest_group()
to capture the various statistics related to the sched_domain.
Group them together into a single data structure.
This will help us to offload the job of updating the sched_domain
statistics to a helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091356.13992.25970.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sg_lb_stats() which
can be invoked to calculate the individual group's statistics
in find_busiest_group().
This reduces the lenght of find_busiest_group() considerably.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Aked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091351.13992.43461.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently a whole bunch of variables are used to store the
various statistics pertaining to the groups we iterate over
in find_busiest_group().
Group them together in a single data structure and add
appropriate comments.
This will be useful later on when we create helper functions
to calculate the sched_group statistics.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091345.13992.20099.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Some indentations in find_busiest_group() can minimized by using
early exits with the help of gotos. This improves readability in
a couple of cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091340.13992.45062.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently the load idx calculation code is in find_busiest_group().
Move that to a static inline helper function.
Similary, to find the first cpu of a sched_group we use
cpumask_first(sched_group_cpus(group))
Use a helper to that. It improves readability in some cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091335.13992.55424.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the start function in preparation of the generic watchdog code.
Also make sure that locking of the start function is OK.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Change the wdt.c watchdog driver so that the code is the same for
both the WDT500 as the WDT501-P card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501.
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Fix following includes:
* #include <asm/io.h> should be #include <linux/io.h>
* #include <asm/uaccess.h> should be #include <linux/uaccess.h>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add the PCI-ID for the upcoming new BMC controller for HP hardware.
Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make sure that the watchdog is not running after loading
and before it is started by opening /dev/watchdog.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The WDT timer ticks quite fast (half of the CPU clock speed, which may
be between 198MHz and 330MHz (or 400MHz on newer boards)). Given it's
size of 32Bit, the maximum timeout value ranges from about 21s to 43s,
depending on the configured CPU clock speed.
This patch add's the timeout module parameter and checks that it's not
bigger then the maximum timeout for the given clock speed.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Clean-up the rc32434 driver code:
- name the platform driver rc32434_wdt_driver
- Replace KBUILD_MODNAME ": " with PFX define.
- Cleanup include files
- Order the ioctl's
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Remove davinci platform-specific IO accessor macros in favor
of standard ioremap + io[read|write]* functions.
Also, convert printk(KERN_ERR ....) into dev_err(...)
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
I noticed the W83697UG driver tries to register a watchdog even though
it already noticed the chip isn't there.
WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.
w83697ug/uf WDT: No W83697UG/UF could be found
w83697ug/uf WDT: Watchdog already running. Resetting timeout to 60 sec
w83697ug/uf WDT: cannot register miscdev on minor=130 (err=-16)
Patch propagates the error back to wdt_init().
Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
wait_event_timeout just takes the numnber of jiffies to wait as
an argument. That value does not include jiffies itself.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a recovery is started for a qeth device, additional invocations
to change a mac address, to configure a VLAN interface on top, or to
add multicast addresses should wait till recovery is finished,
otherwise recovery might fail.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth: Unregister MAC addresses from device (layer 2) during
recovery cycle. When the device is set online the MAC
addresses are registered again on the device.
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performance measurements showed EDDP does not lower CPU costs but increase
them. So we dump out EDDP code from qeth driver.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add statistics counter for software tx checksumming.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a way to provide the MAC address for ax88796 devices from
their platform data. Boards might decide to set the address
programmatically, taken from boot tags or other sources.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to the ax88796 ethernet driver to take IRQ flags
given by the platform_device definition.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device ID for a new variant of the 82574 adapter.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cxgb3 NIC driver can handle more firmware versions than iw_cxgb3,
and since commit 8207befa ("cxgb3: untie strict FW matching") cxgb3
will load with firmware versions that iw_cxgb3 can't handle. The FW
major number indicates a specific interface between the FW and
iw_cxgb3. Thus if the major number of the running firmware does not
match the required version compiled into iw_cxgb3, then iw_cxgb3 must
not register that device.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
On a timeout call a device specific handler early in the recovery so that
we can complete and process successful commands which timed out due to IRQ
loss or the like rather more elegantly.
[Revised to exclude the timeout handling on a few devices that inherit from
SFF but are not SFF enough to use the default timeout handler]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal()
which at times wrongly identified intersections between addresses.
It particularly broke down under a few instances and caused erroneous
bind conflicts.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Binding to a v4-mapped address on an AF_INET6 socket should
produce the same result as binding to an IPv4 address on
AF_INET socket. The two are interchangable as v4-mapped
address is really a portability aid.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv4 wildcard (0.0.0.0) address does not intersect
in any way with explicit IPv6 addresses. These two should
be permitted, but the IPv4 conflict code checks the ipv6only
bit as part of the test. Since binding to an explicit IPv6
address restricts the socket to only that IPv6 address, the
side-effect is that the socket behaves as v6-only. By
explicitely setting ipv6only in this case, allows the 2 binds
to succeed.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
