We only support swap file calling nfs_direct_IO. However, application
might be able to get to nfs_direct_IO if it toggles O_DIRECT flag
during IO and it can deadlock because we grab inode->i_mutex in
nfs_file_direct_write(). So return 0 for such case. Then the generic
layer will fall back to buffer IO.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Put controller into init mode in network stop to end pending transmissions. The
issue is observed in cases when transmitted frame is not acked.
Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
because gcc 4.8 for superH does not support -m32, and the recordmcount.pl
script adds "-m32" when re-compiling the object files with the mcount
locations.
I was not able to reproduce this problem, as it seems that -m32 works fine
for my cross compiler gcc 4.6.3, but I have to assume that -m32 was
deprecated somewhere between 4.6 and 4.8. As it still seems to compile
fine without -m32, I have no reason not to add this patch, as having
-m32 seems to cause trouble for others.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUv9sOAAoJEEjnJuOKh9ldPUIIAJle6R3v+53gylalVhOnn56f
fQkONz1HvLteneBGTFG4xiwK6BJNeTOcLOQbCfBwNBZUjg7QG5eEU3wBG6DCZNIf
Tc1DqB78Fx9HnI0wJby/VtgIMbTqvPsXta0J75g7EFXwaP8bUZFL1s6QmskKlFTf
Gvhr93YP2SFawRf8Gy9AVCkLBSwU1T5y0IsQXPw49buNT+aWwoMWCNJb03rLfZYz
MCNgTfQxf4aYK1EThvb8xurjD2rZkJmRc/LN37vj8M+2e9HoIitCd4O/doxEQtvK
aFw7q/K23bFIXfjKoF1Yjk8hLoQZgCxruZwmZyxEEPtTGsUfNcSyfgpHTNeNDrk=
=d6qd
-----END PGP SIGNATURE-----
Merge tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull superh tracing fix from Steven Rostedt:
"It's been reported that function tracing does not work on the sh
architecture because gcc 4.8 for superH does not support -m32, and the
recordmcount.pl script adds "-m32" when re-compiling the object files
with the mcount locations.
I was not able to reproduce this problem, as it seems that -m32 works
fine for my cross compiler gcc 4.6.3, but I have to assume that -m32
was deprecated somewhere between 4.6 and 4.8. As it still seems to
compile fine without -m32, I have no reason not to add this patch, as
having -m32 seems to cause trouble for others"
* tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
The prior change fixes default output ordering with each column but it
breaks -o/--order option. This patch prepends a new hpp fmt struct to
sort list but not to output field list so that it can affect ordering
without adding a new output column.
The new hpp fmt uses its own compare functions which treats dummy
entries (which have no baseline) little differently - the delta field
can be computed without baseline but others (ratio and wdiff) are not.
The new output will look like below:
$ perf diff -o 2 perf.data.{old,cur,new}
...
# Baseline/0 Delta/1 Delta/2 Shared Object Symbol
# .......... ....... ....... ................. ..........................................
22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc
5.70% +0.28% +0.30% libc-2.20.so [.] free
4.38% -0.21% +0.25% a.out [.] main
1.32% -0.15% +0.05% a.out [.] free@plt
+0.01% [kernel.kallsyms] [k] intel_pstate_timer_func
+0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave
+0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8
+0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt
0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe
0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
1.31% +0.03% -0.06% a.out [.] malloc@plt
31.50% -0.74% -0.23% libc-2.20.so [.] _int_free
32.75% +0.28% -0.83% libc-2.20.so [.] malloc
0.01% [kernel.kallsyms] [k] scheduler_tick
+0.01% [kernel.kallsyms] [k] read_tsc
+0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82
In above example, the output was sorted by 'Delta/2' column first, and
then 'Baseline/0' and finally 'Delta/1'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt. But it'll be needed by upcoming changes in
perf diff command.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fmt_to_data_file() is to retrieve struct data__file from
perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort
callback functions later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf diff result is somewhat confusing since it sometimes hide
small result and sometimes there's no result. So do not hide small
result (less than 0.01%) and print "N/A" if baseline is not
recorded (for ratio and wdiff only). Blank means the baseline is
available but its pairs are not.
Before:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
[kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
[kernel.kallsyms] [k] read_tsc
After:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
+0.01% [kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
+0.01% [kernel.kallsyms] [k] read_tsc
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__compute_resort() is to sort output fields based on the
given field/criteria. This was done without the sort list but as we
added the field to the sort list, we can do it with normal
hists__output_resort() using the ->sort callback.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exclusive options are to prohibit use of conflicting options at the
same time. But it had a side effect that it also limits a such option
can be used at most once. Currently the only user of the flag is perf
probe and it allows to use such options more than once, but when one
tries to use it, perf will fail like below:
$ sudo perf probe -x /lib/libc-2.20.so --add malloc --add free
Error: option `add' cannot be used with add
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event parameters are a basic way for partial events to be specified in
sysfs with per-event names given to the fields that need to be filled in
when using a particular event.
It is intended for supporting cases where the single 'cpu' parameter is
insufficient. For example, POWER 8 has events for physical
sockets/cores/cpus that are accessible from with virtual machines. To
keep using the single 'cpu' parameter we'd need to perform a mapping
between Linux's cpus and the physical machine's cpus (in this case Linux
is running under a hypervisor). This isn't possible because bindings
between our cpus and physical cpus may not be fixed, and we probably
won't have a "cpu" on each physical cpu.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This causes `perf list pmu` to show parameters for parameterized events
like:
pmu/event_name,param1=?,param2=?/ [Kernel PMU event]
An example:
hv_24x7/HPM_TLBIE__PHYS_CORE,core=?/ [Kernel PMU event]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-3-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removes some functions that are not used anywhere:
color_parse_mem()
color_parse()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1419079865-354-1-git-send-email-rickard_strandqvist@spectrumdigital.se
[ Remove now unused parse_{attr,color} routines too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The report__inc_stat() function collects the number of hist entries in
the session in order to calculate the max size of the progess bar.
It'd be better if it does it during the addition of hist entries so that
it can be used by other places too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code being used when decaying and deleting entries from a hists
instance was the same, provide a function to avoid code dup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j6ideab7lkakavfvfguw858z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No logic changes, just to be consistent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other parameters, grouping it on the builtin-mem specific
config area: struct perf_mem.
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies perf mem to default to sampling loads and stores
simultaneously. It could only do one or the other before yet there was
no hardware restriction preventing simultaneous collection. With this
patch, one run is sufficient to collect both.
It is still possible to sample only loads or stores by using the
-t option:
$ perf mem -t load rec
$ perf mem -t load rep
Or
$ perf mem -t store rec
$ perf mem -t store rep
The perf report TUI will show one event at a time. The store output will
contain a Weight column which will be empty.
In V2, we updated the man pages to reflect the change and also simplify
the initialization of the argv vector passed to the cmd_*() functions as
per LKML feedback.
In V3, we fixed typos in the changelog.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current rounding of "size" is wrong:
- If "start" is sufficiently near the next page boundary, "size"
is decremented by more than enough and the last page is lost.
- If "size" is sufficiently small, it is wrapped around and gets
a bogus value.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 but the
two LSBs of the TDA19988's address are set by two configuration pins
on the chip. Irrespective of the chip, the associated CEC peripheral's
I2C address is based upon the main I2C address.
This patch avoids any special handling required to support systems that
contain multiple TDA19988 devices on the same I2C bus.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Disable power down counter of the watchdog to avoid system resets. The
watchdog power down counter is set automatically by the chip. If it is
not set to 0 in the driver, the system resets.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Improve power management operations(suspend and resume) as part of
dev_pm_ops for IMX2 watchdog driver.
If PM will be supported, please make sure that the wdev->clk
could disable the watchdog's counter input clock source or can
mask watchdog's reset request to the core.
If watchdog is still used by consumers and resumes from deep
sleep state, we need to restart the watchdog again without
enabling the timer.
If watchdog been has started --> stopped by the consumers and
resumes from non-deep sleep state, then start the timer again.
If watchdog has been started --> stopped by the consumers and
resumes from deep sleep state, will do nothing. The watchdog
will be restarted by consumers next time to be used.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The commit dfef99cd0b ("perf probe: Use ref_reloc_sym based address
instead of the symbol name") converts kprobes to use ref_reloc_sym (i.e.
_stext) and offset instead of using symbol's name directly. So on my
system, adding do_fork ends up with like below:
$ sudo perf probe -v --add do_fork%return
probe-definition(0): do_fork%return
symbol:do_fork file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/3.17.6-1-ARCH/build/vmlinux for symbols
Could not open debuginfo. Try to use symbols.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: r:probe/do_fork _stext+456136
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Operation not permitted (Code: -1)
As you can see, the do_fork was translated to _stext+456136. This was
because to support (local) symbols that have same name. But the problem
is that kretprobe requires to be inserted at function start point so it
simply checks whether it's called with offset 0. And if not, it'll
return with -EINVAL. You can see it with dmesg.
$ dmesg | tail -1
[125621.764103] Return probe must be used without offset.
So we need to use the symbol name instead of ref_reloc_sym in case of
return probes.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1421234288-22758-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing boilerplate from two places, where one would have to find the
first entry, then iterate using symbol__next_by_name + strcmp to see if
the next member had the same name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-eh73z8gthv20yowirmx2yk38@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_probe_trace_events_from_map() searches matching symbol from a
map (so from a backing dso). For uprobes, it'll create a new map (and
dso) and loads it using a filter. It's a little bit inefficient in that
it'll read out the symbol table everytime but works well anyway.
For kprobes however, it'll reuse existing kernel map which might be
loaded before. In this case map__load() just returns with no result.
It makes kprobes always failed to find symbol even if it exists in the
map (dso).
To fix it, use map__find_symbol_by_name() instead. It'll load a map
with full symbols and sorts them by name. It needs to search sibing
nodes since there can be multiple (local) symbols with same name.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-3-git-send-email-namhyung@kernel.org
[ Use symbol__next_by_name ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Given a symbol, go to the next entry in a rbtree sorted by symbol name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-aq210drxprnu2so4dye5xa3j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a dso contains multiple symbols which have same name, current
dso__find_symbol_by_name() only finds an one of them and there's no way
to get the all symbols without going through the rbtree.
So make symbols__find_by_name() return the first entry with the given
name and the next patch in this series will provide a way to iterate
from there, by the name ordered rb_tree, till a suitable symbol is
found.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-2-git-send-email-namhyung@kernel.org
[ Yanked this independent hunk, without changes, from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lock prefix handling fails to free the strdup()'d name as well as
the fields allocated by the instruction parsing.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/1421607621-15005-2-git-send-email-rabin@rab.in
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't use the ins's ->sncprintf() if the parsing failed.
For example, this fixes the display of "imul %edx". Without this patch:
| imul (null),(null)
After this patch:
| imul %edx
Signed-off-by: Rabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421607621-15005-1-git-send-email-rabin@rab.in
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf for arm64 I hit a warning (and be treated as an
error) like below:
aarch64-oe-linux-gcc -o .../scripts/perl/Perf-Trace-Util/Context.o -c -Wbad-function-cast \
... scripts/perl/Perf-Trace-Util/Context.c
In file included from .../usr/lib64/perl/5.14.3/CORE/perl.h:2464:0,
from Context.xs:23:
/.../usr/lib64/perl/5.14.3/CORE/handy.h:108:0: error: "bool" redefined [-Werror]
# define bool char
^
In file included from /.../usr/src/kernel/tools/include/linux/types.h:4:0,
from /.../usr/src/kernel/arch/arm64/include/uapi/asm/sigcontext.h:19,
from /.../usr/include/bits/sigcontext.h:27,
from /.../usr/include/signal.h:340,
from /.../usr/include/sys/param.h:28,
from /.../usr/lib64/perl/5.14.3/CORE/perl.h:678,
from Context.xs:23:
/.../usr/lib/aarch64-oe-linux/gcc/aarch64-oe-linux/4.9.2/include/stdbool.h:33:0: note: this is the location of the previous definition
#define bool _Bool
Looks like the failure is caused by arm64 uapi/asm/sigcontext.h, which
includes linux/types.h while other archs not.
Current perl consider this problem:
http://perl5.git.perl.org/perl.git/commit/bd31be4baa3ee68abdb92c0db3200efe0fad903b
However there are users which use old version of perl.
This patch includes stdbool.h before Context.xs and define HAS_BOOL to
prevent perl'e headers define its own 'bool'. Code is learn from perl's
git tree.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1421671397-4659-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testing has shown that on sun4i the display backend engine does not have
deep enough fifo-s causing flickering / tearing in full-hd mode due to
fifo underruns. This can be avoided by letting the display frontend engine
do the dma from memory, and then letting it feed the data directly into
the backend unmodified, as the frontend does have deep enough fifo-s.
Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
pipeline on sun4i, we need to keep that one around too (unfortunately).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This batch contains two fixes for FireWire lib module and a quirk
for yet another Logitech WebCam. The former is the fixes for MIDI
handling I forgot to pick up during the merge window. All the
fixed code is pretty local and shouldn't give any regressions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HKNt
-----END PGP SIGNATURE-----
Merge tag 'sound-3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This batch contains two fixes for FireWire lib module and a quirk for
yet another Logitech WebCam. The former is the fixes for MIDI
handling I forgot to pick up during the merge window. All the fixed
code is pretty local and shouldn't give any regressions"
* tag 'sound-3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
ALSA: firewire-lib: limit the MIDI data rate
ALSA: firewire-lib: remove rx_blocks_for_midi quirk
Pull drm fixes from Dave Airlie:
"Just back from LCA + some days off, had some fixes from the past 2 weeks,
Some amdkfd code removal for a feature that wasn't ready, otherwise
just one fix for core helper sleeping, exynos, i915, and radeon fixes.
I thought I had some sti fixes but they were already in, and it
confused me for a few mins this morning"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fb helper should avoid sleeping in panic context
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/radeon: use rv515_ring_start on r5xx
drm/radeon: add si dpm quirk list
drm/radeon: don't print error on -ERESTARTSYS
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
drm/exynos: remove the redundant machine checking code
drm/radeon: add a dpm quirk list
drm/amdkfd: Fix sparse warning (different address space)
drm/radeon: fix VM flush on CIK (v3)
drm/radeon: fix VM flush on SI (v3)
drm/radeon: fix VM flush on cayman/aruba (v3)
drm/amdkfd: Drop interrupt SW ring buffer
- Skip caching volatile registers in tps65218
- Use correct address base in tps65218
- Repair deadlock on suspend in rtsx_usb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Afdx
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- Avoid platform ID collision in da9052
- Skip caching volatile registers in tps65218
- Use correct address base in tps65218
- Repair deadlock on suspend in rtsx_usb
* tag 'mfd-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx_usb: Fix runtime PM deadlock
mfd: tps65218: Make INT1 our status_base register
mfd: tps65218: Make INT[12] and STATUS registers volatile
mfd: da9052-core: Fix platform-device id collision
Commit 6b5fe46dfa (btrfs: do commit in sync_fs if there are pending
changes) will call btrfs_start_transaction() in sync_fs(), to handle
some operations needed to be done in next transaction.
However this can cause deadlock if the filesystem is frozen, with the
following sys_r+w output:
[ 143.255932] Call Trace:
[ 143.255936] [<ffffffff816c0e09>] schedule+0x29/0x70
[ 143.255939] [<ffffffff811cb7f3>] __sb_start_write+0xb3/0x100
[ 143.255971] [<ffffffffa040ec06>] start_transaction+0x2e6/0x5a0
[btrfs]
[ 143.255992] [<ffffffffa040f1eb>] btrfs_start_transaction+0x1b/0x20
[btrfs]
[ 143.256003] [<ffffffffa03dc0ba>] btrfs_sync_fs+0xca/0xd0 [btrfs]
[ 143.256007] [<ffffffff811f7be0>] sync_fs_one_sb+0x20/0x30
[ 143.256011] [<ffffffff811cbd01>] iterate_supers+0xe1/0xf0
[ 143.256014] [<ffffffff811f7d75>] sys_sync+0x55/0x90
[ 143.256017] [<ffffffff816c49d2>] system_call_fastpath+0x12/0x17
[ 143.256111] Call Trace:
[ 143.256114] [<ffffffff816c0e09>] schedule+0x29/0x70
[ 143.256119] [<ffffffff816c3405>] rwsem_down_write_failed+0x1c5/0x2d0
[ 143.256123] [<ffffffff8133f013>] call_rwsem_down_write_failed+0x13/0x20
[ 143.256131] [<ffffffff811caae8>] thaw_super+0x28/0xc0
[ 143.256135] [<ffffffff811db3e5>] do_vfs_ioctl+0x3f5/0x540
[ 143.256187] [<ffffffff811db5c1>] SyS_ioctl+0x91/0xb0
[ 143.256213] [<ffffffff816c49d2>] system_call_fastpath+0x12/0x17
The reason is like the following:
(Holding s_umount)
VFS sync_fs staff:
|- btrfs_sync_fs()
|- btrfs_start_transaction()
|- sb_start_intwrite()
(Waiting thaw_fs to unfreeze)
VFS thaw_fs staff:
thaw_fs()
(Waiting sync_fs to release
s_umount)
So deadlock happens.
This can be easily triggered by fstest/generic/068 with inode_cache
mount option.
The fix is to check if the fs is frozen, if the fs is frozen, just
return and waiting for the next transaction.
Cc: David Sterba <dsterba@suse.cz>
Reported-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[enhanced comment, changed to SB_FREEZE_WRITE]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Fs_info->pending_changes is never cleared since the original code uses
cmpxchg(&fs_info->pending_changes, 0, 0), which will only clear it if
pending_changes is already 0.
This will cause a lot of problem when mount it with inode_cache mount
option.
If the btrfs is mounted as inode_cache, pending_changes will always be
1, even when the fs is frozen.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
- Remove the interrupt SW ring buffer impl. as it is not used by any module
in amdkfd.
- Fix a sparse warning
* tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Fix sparse warning (different address space)
drm/amdkfd: Drop interrupt SW ring buffer
misc i915 fixes
* tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
This pull request includes below fixups,
- Remove duplicated machine checking.
. It seems that this code was added when you merged 'v3.18-rc7' into
drm-next. commit id : e8115e79aa
- Fix hdmiphy reset.
. Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other
is APB bus - memory mapped I/O. So this patch makes hdmiphy reset
to be done according to interfaces, I2C or APB bus.
- And add some exception codes.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/exynos: remove the redundant machine checking code
Some radeon fixes for 3.19:
- GPUVM stability fixes
- SI dpm quirks
- Regression fixes
* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: use rv515_ring_start on r5xx
drm/radeon: add si dpm quirk list
drm/radeon: don't print error on -ERESTARTSYS
drm/radeon: add a dpm quirk list
drm/radeon: fix VM flush on CIK (v3)
drm/radeon: fix VM flush on SI (v3)
drm/radeon: fix VM flush on cayman/aruba (v3)
Pull libata fixes from Tejun Heo:
- Bartlomiej will be co-maintaining PATA portion of libata. git
workflow will stay the same.
- sata_sil24 wasn't happy with tag ordered submission. An option to
restore the old tag allocation behavior is implemented for sil24.
- a very old race condition in PIO host state machine which can trigger
BUG fixed.
- other driver-specific changes
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: prevent HSM state change race between ISR and PIO
libata: allow sata_sil24 to opt-out of tag ordered submission
ata: pata_at91: depend on !ARCH_MULTIPLATFORM
ahci: Remove Device ID for Intel Sunrise Point PCH
ahci: Use dev_info() to inform about the lack of Device Sleep support
libata: Whitelist SSDs that are known to properly return zeroes after TRIM
sata_dwc_460ex: fix resource leak on error path
ata: add MAINTAINERS entry for libata PATA drivers
libata: clean up MAINTAINERS entries
libata: export ata_get_cmd_descript()
ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
Pull workqueue fix from Tejun Heo:
"The xfs folks have been running into weird and very rare lockups for
some time now. I didn't think this could have been from workqueue
side because no one else was reporting it. This time, Eric had a
kdump which we looked into and it turned out this actually was a
workqueue bug and the bug has been there since the beginning of
concurrency managed workqueue.
A worker pool ensures forward progress of the workqueues associated
with it by always having at least one worker reserved from executing
work items. When the pool is under contention, the idle one tries to
create more workers for the pool and if that doesn't succeed quickly
enough, it calls the rescuers to the pool.
This logic had a subtle race condition in an early exit path. When a
worker invokes this manager function, the function may return %false
indicating that the caller may proceed to executing work items either
because another worker is already performing the role or conditions
have changed and the pool is no longer under contention.
The latter part depended on the assumption that whether more workers
are necessary or not remains stable while the pool is locked; however,
pool->nr_running (concurrency count) may change asynchronously and it
getting bumped from zero asynchronously could send off the last idle
worker to execute work items.
The race window is fairly narrow, and, even when it gets triggered,
the pool deadlocks iff if all work items get blocked on pending work
items of the pool, which is highly unlikely but can be triggered by
xfs.
The patch removes the race window by removing the early exit path,
which doesn't server any purpose anymore anyway"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix subtle pool management issue which can stall whole worker_pool
The kobject memory shouldn't have been freed before the kobject
is released because driver core can access it freely before its
release.
This patch frees hctx in its release callback. For ctx, they
share one single per-cpu variable which is associated with
the request queue, so free ctx in q->mq_kobj's release handler.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
(fix ctx kobjects)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
