* refs/heads/tmp-5f7f76a
Linux 4.4.118
net: dst_cache_per_cpu_dst_set() can be static
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
KVM: nVMX: invvpid handling improvements
KVM: VMX: clean up declaration of VPID/EPT invalidation types
kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types
KVM: nVMX: vmx_complete_nested_posted_interrupt() can't fail
KVM: nVMX: kmap() can't fail
x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
x86/spectre: Simplify spectre_v2 command line parsing
x86/retpoline: Avoid retpolines for built-in __init functions
x86/kvm: Update spectre-v1 mitigation
x86/paravirt: Remove 'noreplace-paravirt' cmdline option
x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
x86/spectre: Report get_user mitigation for spectre_v1
nl80211: Sanitize array index in parse_txq_params
vfs, fdtable: Prevent bounds-check bypass via speculative execution
x86/syscall: Sanitize syscall table de-references under speculation
x86/get_user: Use pointer masking to limit speculation
x86: Introduce barrier_nospec
x86: Implement array_index_mask_nospec
array_index_nospec: Sanitize speculative array de-references
Documentation: Document array_index_nospec
x86/spectre: Check CONFIG_RETPOLINE in command line parser
x86/cpu/bugs: Make retpoline module warning conditional
x86/bugs: Drop one "mitigation" from dmesg
x86/nospec: Fix header guards names
module/retpoline: Warn about missing retpoline in module
KVM: VMX: Make indirect call speculation safe
KVM: x86: Make indirect calls in emulator speculation safe
x86/retpoline: Remove the esp/rsp thunk
KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously
kasan: rework Kconfig settings
drm/gma500: remove helper function
x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
genksyms: Fix segfault with invalid declarations
dell-wmi, dell-laptop: depends DMI
netlink: fix nla_put_{u8,u16,u32} for KASAN
ASoC: Intel: Kconfig: fix build when ACPI is not enabled
ARM: tegra: select USB_ULPI from EHCI rather than platform
ncr5380: shut up gcc indentation warning
usb: phy: msm add regulator dependency
idle: i7300: add PCI dependency
binfmt_elf: compat: avoid unused function warning
isdn: sc: work around type mismatch warning
power: bq27xxx_battery: mark some symbols __maybe_unused
Revert "power: bq27xxx_battery: Remove unneeded dependency in Kconfig"
ncpfs: fix unused variable warning
gpio: xgene: mark PM functions as __maybe_unused
net: hp100: remove unnecessary #ifdefs
dmaengine: zx: fix build warning
perf/x86: Shut up false-positive -Wmaybe-uninitialized warning
wireless: cw1200: use __maybe_unused to hide pm functions_
cw1200: fix bogus maybe-uninitialized warning
v4l: remove MEDIA_TUNER dependency for VIDEO_TUNER
hdpvr: hide unused variable
drm/gma500: Sanity-check pipe index
serial: 8250_mid: fix broken DMA dependency
ASoC: rockchip: use __maybe_unused to hide st_irq_syscfg_resume
ISDN: eicon: reduce stack size of sig_ind function
em28xx: only use mt9v011 if camera support is enabled
go7007: add MEDIA_CAMERA_SUPPORT dependency
KVM: add X86_LOCAL_APIC dependency
Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning
drm/nouveau: hide gcc-4.9 -Wmaybe-uninitialized
tc358743: fix register i2c_rd/wr functions
staging: unisys: visorinput depends on INPUT
i2c: remove __init from i2c_register_board_info()
b2c2: flexcop: avoid unused function warnings
infiniband: cxgb4: use %pR format string for printing resources
iio: adc: axp288: remove redundant duplicate const on axp288_adc_channels
ASoC: mediatek: add i2c dependency
genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
tty: cyclades: cyz_interrupt is only used for PCI
drm/vmwgfx: use *_32_bits() macros
tlan: avoid unused label with PCI=n
tc1100-wmi: fix build warning when CONFIG_PM not enabled
ipv4: ipconfig: avoid unused ic_proto_used symbol
netfilter: ipvs: avoid unused variable warnings
x86/platform/olpc: Fix resume handler build warning
staging: wilc1000: fix kbuild test robot error
rtlwifi: fix gcc-6 indentation warning
USB: cdc_subset: only build when one driver is enabled
hwrng: exynos - use __maybe_unused to hide pm functions
fbdev: sm712fb: avoid unused function warnings
Drivers: hv: vmbus: fix build warning
modsign: hide openssl output in silent builds
fbdev: s6e8ax0: avoid unused function warnings
mtd: cfi: enforce valid geometry configuration
mtd: sh_flctl: pass FIFO as physical address
amd-xgbe: Fix unused suspend handlers build warning
fbdev: auo_k190x: avoid unused function warnings
driver-core: use 'dev' argument in dev_dbg_ratelimited stub
target/user: Fix cast from pointer to phys_addr_t
tty: hvc_xen: hide xen_console_remove when unused
usb: musb/ux500: remove duplicate check for dma_is_compatible
pwc: hide unused label
SCSI: initio: remove duplicate module device table
scsi: mvumi: use __maybe_unused to hide pm functions
video: Use bool instead int pointer for get_opt_bool() argument
fbdev: sis: enforce selection of at least one backend
staging: ste_rmi4: avoid unused function warnings
video: fbdev: sis: remove unused variable
scsi: fdomain: drop fdomain_pci_tbl when built-in
mptfusion: hide unused seq_mpt_print_ioc_summary function
mtd: maps: add __init attribute
mtd: ichxrom: maybe-uninitialized with gcc-4.9
md: avoid warning for 32-bit sector_t
profile: hide unused functions when !CONFIG_PROC_FS
dpt_i2o: fix build warning
drivers/net: fix eisa_driver probe section mismatch
scsi: sim710: fix build warning
x86/boot: Avoid warning for zero-filling .bss
thermal: spear: use __maybe_unused for PM functions
ssb: mark ssb_bus_register as __maybe_unused
reiserfs: avoid a -Wmaybe-uninitialized warning
ALSA: hda/ca0132 - fix possible NULL pointer use
arm64: Kconfig: select COMPAT_BINFMT_ELF only when BINFMT_ELF is set
scsi: advansys: fix uninitialized data access
x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG
x86: add MULTIUSER dependency for KVM
thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies
x86/build: Silence the build with "make -s"
tools build: Add tools tree support for 'make -s'
x86/fpu/math-emu: Fix possible uninitialized variable use
arm64: define BUG() instruction without CONFIG_BUG
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
scsi: advansys: fix build warning for PCI=n
video: fbdev: via: remove possibly unused variables
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
gpio: intel-mid: Fix build warning when !CONFIG_PM
vmxnet3: prevent building with 64K pages
isdn: icn: remove a #warning
virtio_balloon: prevent uninitialized variable use
hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close
xen: XEN_ACPI_PROCESSOR is Dom0-only
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
dmaengine: jz4740: disable/unprepare clk if probe fails
drm/armada: fix leak of crtc structure
xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.
spi: sun4i: disable clocks in the remove function
ASoC: rockchip: disable clock on error
clk: fix a panic error caused by accessing NULL pointer
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
dmaengine: ioat: Fix error handling path
509: fix printing uninitialized stack memory when OID is empty
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
net_sched: red: Avoid illegal values
net_sched: red: Avoid devision by zero
gianfar: fix a flooded alignment reports because of padding issue.
s390/dasd: prevent prefix I/O error
powerpc/perf: Fix oops when grouping different pmu events
ipvlan: Add the skb->mark as flow4's member to lookup route
scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
RDMA/cma: Make sure that PSN is not over max allowed
pinctrl: sunxi: Fix A80 interrupt pin bank
media: s5k6aa: describe some function parameters
perf bench numa: Fixup discontiguous/sparse numa nodes
perf top: Fix window dimensions change handling
ARM: dts: am4372: Correct the interrupts_properties of McASP
ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context
usb: build drivers/usb/common/ when USB_SUPPORT is set
usbip: keep usbip_device sockfd state in sync with tcp_socket
staging: iio: adc: ad7192: fix external frequency setting
binder: check for binder_thread allocation failure in binder_poll()
staging: android: ashmem: Fix a race condition in pin ioctls
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
Make DST_CACHE a silent config option
arm64: dts: add #cooling-cells to CPU nodes
video: fbdev/mmp: add MODULE_LICENSE
ASoC: ux500: add MODULE_LICENSE tag
net: avoid skb_warn_bad_offload on IS_ERR
netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert
netfilter: on sockopt() acquire sock lock only in the required scope
netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()
netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}
netfilter: x_tables: fix int overflow in xt_alloc_table_info()
KVM: x86: fix escape of guest dr6 to the host
crypto: x86/twofish-3way - Fix %rbp usage
selinux: skip bounded transition processing if the policy isn't loaded
selinux: ensure the context is NUL terminated in security_context_to_sid_core()
Provide a function to create a NUL-terminated string from unterminated data
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
blktrace: fix unlocked registration of tracepoints
xfrm: check id proto in validate_tmpl()
xfrm: Fix stack-out-of-bounds read on socket policy lookup.
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
cfg80211: check dev_set_name() return value
net: replace dst_cache ip6_tunnel implementation with the generic one
net: add dst_cache support
ANDROID: sdcardfs: Hold i_mutex for i_size_write
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck64-XTS
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck128-XTS
BACKPORT, FROMGIT: crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS
FROMGIT: crypto: speck - export common helpers
BACKPORT, FROMGIT: crypto: speck - add support for the Speck block cipher
UPSTREAM: ANDROID: binder: synchronize_rcu() when using POLLFREE.
f2fs: updates on v4.16-rc1
Conflicts:
net/Kconfig
net/core/Makefile
Change-Id: I659b0444812b04252f1f1fba8bc62410ce42b061
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
This reverts commit 6bd03ce3c1, it was applied
in error and cuased this link failure
drivers/built-in.o: In function `bq27xxx_battery_i2c_read':
core.c:(.text+0xa6da8): undefined reference to `i2c_transfer'
drivers/built-in.o: In function `bq27xxx_battery_init':
core.c:(.init.text+0x68e0): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `bq27xxx_battery_exit':
core.c:(.exit.text+0xc6c): undefined reference to `i2c_del_driver'
Later upstream kernels fixed this with a larger rework in commit
703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module"),
but we cannot backport that to 4.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The power directory structure has changed in kernel version 4.9. Align
msm-4.4 with this new directory structure.
Change-Id: Iba729f8ef33245ea78cdc05276ba8f5593191509
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The original commit was reverted due to conflicts in the kernel upgrade
process. Now that the upgrade is complete we can introduce this commit
again.
Original commit:
commit 8e10bff713 ("power: move QTI charger drivers to a new
sub-directory qcom-charger")
QTI charger drivers have outgrown their home in power and deserve their
own sub-directory. Move all QTI charger drivers and their dependencies to
a new sub-directory of power called qcom-charger.
CRs-Fixed: 1001767
Change-Id: I5465a944a79f622ddf69534075b067db0fb10c95
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Allow charger to expose an extcon device which can emit
notification for USB and USB-HOST cable connection states.
The driver can correspondingly register interest in being
notified of these cable connection statuses.
This is intended to replace the power_supply_set_present()
and power_supply_set_usb_otg() mechanisms currently used.
Change-Id: I6c7cf971f59ac3f3075f5c8f13786306729f25a8
Signed-off-by: Jack Pham <jackp@codeaurora.org>
QTI charger drivers have outgrown thier home in power and deserve their
own sub-directory. Move all QTI charger drivers and their depedencies to
a new sub-directory of power called qcom-charger.
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Many of the older SMB charger drivers are no longer present therefore
remove the config entries for them.
Duplicate config entries are present. Remove them.
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Change to using upstream spmi bus architecture. All the spmi devices,
marked by spmi-dev-container, become platform devices.
spmi-slave-container devices become spmi_devices each representing
a slave. The read/write functions use regmap api's instead of calls to
spmi_ext_register_read/write() implemented by the spmi bus. This
regmap is instantiated per slave.
The spmi bus helper functions like spmi_get_irq get changed to their
platform bus equivalents.
Change Kconfig files include
* Remove dependence on OF_SPMI, MSM_QPNP_INT
* There were few places where an earlier commit
dcc2aedc80746acee589e4b47d3e6adf5d3ec253
missed adding dependence on SPMI along with MSM_SPMI.
Fix them.
* Add depends on ARCH_MSM. ARCH_MSM is used for internal builds.
Change the nodes in DTSI files to confirm to the modified drivers.
Update their binding docs to drop spmi-dev-container and
spmi-slave-container;
Finally update defconfig to use upstream SPMI.
Change-Id: Ic85bff27c09c84b152cb38acbc3cadd05c0ec57a
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This snapshot is taken as of msm-3.18 commit
9da4ddc (Merge "clk: msm: clock-gcc: Associate gfx rail
voting with gfx3d branch")
Change-Id: Idd2f467f1f1863a156d1757589dfe78158f0e43f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
I2C is only required when using the config item BATTERY_BQ27XXX_I2C which
already depends on the I2C subsystem, remove the unneeded dependency from
BATTERY_BQ27XXX.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This driver fails to link without CONFIG_IIO, since
there are no stubs for the iio_channels functions.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Marek Belisko <marek@goldelico.com>
Acked-by: Nikolaus Schaller <hns@goldelico.com>
This adds power supply driver support for the Fuel-Gauge part of
the DA9150 combined Charger and Fuel-Gauge device.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support means the ability to select a device through Kconfig, DT and
ACPI, an instance variable allowing to check which chip is active, and
the reporting back of the selected device through the model_name power
supply sysfs property.
This patch by itself is not sufficient to actually use those two added
devices in a real-world setting due to some feature differences which
are addressed by other patches in this series.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This patch adds support for the tps65217 charger driver. This driver is
responsible for controlling the charger aspect of the tps65217 mfd.
Currently, this mainly consists of turning on and off the charger, but
some other features of the charger can be supported through this driver.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Add the Qualcomm Switch-Mode Battery Charger and Boost driver, found in
pm8941.
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This adds a driver for the usb power_supply bits of the axp20x PMICs.
I initially started writing my own driver, before coming aware of
Bruno Prémont's excellent earlier RFC with a driver for this.
My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's
drvier has, so I've copied the code for those from his driver.
Note that the AC-power-supply and battery charger bits will need separate
drivers. Each one needs its own devictree child-node so that other
devicetree nodes can reference the right power-supply, and thus each one
will get its own mfd-cell / platform_device and platform-driver.
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.
Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455
Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.
This driver interfaces with the axp20x mfd driver as a cell
and listens to extcon cable events for setting up charging.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
More details about the chip can be found here:
http://www.ti.com/product/bq25890
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdf
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issues
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.
To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.
v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[ removed .owner field ]
Signed-off-by: Sebastian Reichel <sre@kernel.org>
To guerantee proper charing and managing batteries even in suspend,
charger-manager has used rtc device with rtc framework interface.
However, it is better to use alarmtimer for cleaner and more appropriate
operation.
This patch makes driver to use alarmtimer for polling work in suspend and
removes all deprecated codes related with using rtc interface.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This is only a small clean-up. The driver can be built without SYSFS
as there exist stubs for used functions.
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Add new driver for Maxim 77693 switch-mode charger (part of max77693
MFD driver) providing power supply class information to userspace.
The charger has +20V tolerant input. Current input can be set from 0 to
2.58 A. The charger can deliver up to 2.1 A to the battery or 3.5 A to
the system (when supplying additional current from battery to system).
The driver is configured through DTS (battery and system related
settings) and sysfs entries (timers and top-off charging threshold).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This patch adds device driver of Richtek PMIC.
The driver support battery fuel gauge. Fuel gauge calculates and determines the
battery state of charge (SOC) according to battery open circuit voltage (OCV).
Also, this driver provides battery average voltage, voltage and battery present
property.
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Make the max14577 charger driver depending on SYSFS instead selecting
it. This fixes warning on x86_64 with allmodconfig:
scripts/kconfig/conf --allmodconfig Kconfig
fs/sysfs/Kconfig:1:error: recursive dependency detected!
fs/sysfs/Kconfig:1: symbol SYSFS is selected by CHARGER_MAX14577
drivers/power/Kconfig:327: symbol CHARGER_MAX14577 depends on POWER_SUPPLY
drivers/power/Kconfig:1: symbol POWER_SUPPLY is selected by HID_SONY
drivers/hid/Kconfig:638: symbol HID_SONY depends on NEW_LEDS
drivers/leds/Kconfig:8: symbol NEW_LEDS is selected by SENSORS_APPLESMC
drivers/hwmon/Kconfig:299: symbol SENSORS_APPLESMC depends on HWMON
drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:496: symbol EEEPC_LAPTOP depends on HOTPLUG_PCI
drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFS
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Remove hard-coded values for:
- Fast Charge current,
- End Of Charge current,
- Fast Charge timer,
- Overvoltage Protection Threshold,
- Battery Constant Voltage,
and use DTS or sysfs to configure them. This allows using the max14577 charger
driver with different batteries.
Now the charger driver requires valid configuration data from DTS. In
case of wrong configuration data it fails during probe.
The fast charge timer is configured through sysfs entry.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for MAX77836 charger to the max14577 driver. The MAX77836
charger is almost the same as 14577 model except:
- No dead-battery detection;
- Support for special charger (like in MAX77693);
- Support for DX over-voltage protection (like in MAX77693);
- Lower values of charging current (two times lower current for
slow/fast charge, much lower EOC current);
- Slightly different values in ChgTyp field of STATUS2 register. On
MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the
0x6 means special charger and 0x7 is reserved. Regardless of these
differences the driver maps them to one enum max14577_muic_charger_type.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This adds a driver for reading the battery status of the
battery connected to the Atmel microcontroller on the
iPAQ h3xxx series.
Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.
4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.
5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.
6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.
7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.
9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.
10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.
14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.
15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.
18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.
19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.
21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.
The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.
drivers/built-in.o: In function `goldfish_battery_probe':
drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap'
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
MAX14577 chip is a multi-function device which includes MUIC, charger and
voltage regulator. The driver is located in drivers/mfd.
This patch supports battery charging control of MAX14577 chip and provides
power supply class information to userspace.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
max17042 now uses regmap interface but does not enable config option. This
patch fixes the following build errors:
drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type
drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer
drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer
drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer
drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function)
drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c: In function ‘max17042_probe’:
drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’
Signed-off-by: Austin Boyle <boyle.austin@gmail.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.
It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.
Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Thanks-to: Stephen Warren <swarren@wwwdotorg.org>
Thanks-to: Thierry Reding <thierry.reding@gmail.com>
Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This driver is used and tested on gta04 phone. It's using twl4030_madc
(similar to rx51 existing driver). Driver also implement charging and
discharging calibration data so user can define ranges and level.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lukas Märdian <lukas@goldelico.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Add driver support for the Texas Instruments BQ24190 battery charger.
Some of the information provided by the device is about the charger and
other information is about the battery so create two power_supply objects
(one for each) and provide the appropriate information for each one.
The device has many fields that go beyond what is reasonable to report or
modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver
exports the register fields via sysfs. They are prefixed by 'f_' (for
'field') to make it easier to distinguish between a register field and a
"normal" sysfs file exported by the power_supply infrastructure.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Nearly all the other goldfish peripherals (mtd, keyboard, etc) have a
dependency on the main platform's GOLDFISH Kconfig item, but this one got
skipped. Even with consistency as a justification, there was initial
resistance[1] from some people to adding it however, as they wanted the
extra compile coverage.
Now, with CONFIG_COMPILE_TEST, we have the middle ground that will give
people the coverage who want it, and let those who don't want it to skip
ever seeing the option presented.
[1] https://lkml.org/lkml/2013/2/27/333
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
This patch fixes build failure(randconfig) of next-20130501. When config
I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends
on I2C only if I2C is not disabled, as Lars commented. Last version of
this patch make the driver depend on I2C unconditionally.
Failure message:
drivers/built-in.o: In function `bq27x00_read_i2c':
bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer'
drivers/built-in.o: In function `bq27x00_battery_init':
bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver'
bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver'
drivers/built-in.o: In function `bq27x00_battery_exit':
bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1
Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Fix build errors in lp8788-charger by making it depend on IIO.
Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y.
lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get'
lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get'
lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release'
lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
- OpenFirmware/DeviceTree support for the Power Supply core: the core now
automatically populates supplied_from hierarchy from the device tree.
With these patches chargers and batteries can now lookup each other
without the board files support shim. Rhyland Klein at NVIDIA did the
work;
- New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the
AB85xx core and depends on some recent changes to it, so that is why the
driver comes through the battery tree. It has an appropriate ack from
the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson
and Hongbo Zhang at Linaro authored the driver;
- Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes
touch mfd parts, but these were acked by the appropriate MFD maintainer
(i.e. Samuel Ortiz). Lee Jones at Linaro did most of the work and lead
the submission process.
Minor changes, but still worth mentioning:
- Battery temperature reporting fix for Nokia N900 phones;
- Versatile Express poweroff driver moved into drivers/power/reset/.
- Tree-wise: use devm_kzalloc() where appropriate;
- Tree-wise: dev_pm_ops cleanups/fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=5BdE
-----END PGP SIGNATURE-----
Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6
Pull battery updates from Anton Vorontsov:
"Highlights:
- OpenFirmware/DeviceTree support for the Power Supply core: the core
now automatically populates supplied_from hierarchy from the device
tree. With these patches chargers and batteries can now lookup
each other without the board files support shim. Rhyland Klein at
NVIDIA did the work
- New ST-Ericsson ABX500 hwmon driver. The driver is heavily using
the AB85xx core and depends on some recent changes to it, so that
is why the driver comes through the battery tree. It has an
appropriate ack from the hwmon maintainer (i.e. Guenter Roeck).
Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
the driver
- Final bits to sync AB85xx ST-Ericsson changes into mainline. The
changes touch mfd parts, but these were acked by the appropriate
MFD maintainer (ie Samuel Ortiz). Lee Jones at Linaro did most of
the work and lead the submission process.
Minor changes, but still worth mentioning:
- Battery temperature reporting fix for Nokia N900 phones
- Versatile Express poweroff driver moved into drivers/power/reset/
- Tree-wide: use devm_kzalloc() where appropriate
- Tree-wide: dev_pm_ops cleanups/fixes"
* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
pm2301-charger: Fix suspend/resume
charger-manager: Use kmemdup instead of kzalloc + memcpy
power_supply: Populate supplied_from hierarchy from the device tree
power_supply: Add core support for supplied_from
power_supply: Define Binding for power-supplies
rx51_battery: Fix reporting temperature
hwmon: Add ST-Ericsson ABX500 hwmon driver
ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
ab8500_{bmdata,fg}: Add const attributes to some data arrays
ab8500_bmdata: Eliminate CamelCase warning of some variables
ab8500_btemp: Make ab8500_btemp_get* interfaces public
goldfish_battery: Use resource_size()
lp8788-charger: Use PAGE_SIZE for the sysfs read operation
max8925_power: Use devm_kzalloc()
da9030_battery: Use devm_kzalloc()
da9052-battery: Use devm_kzalloc()
ds2760_battery: Use devm_kzalloc()
ds2780_battery: Use devm_kzalloc()
gpio-charger: Use devm_kzalloc()
isp1704_charger: Use devm_kzalloc()
...
This patch adds support for the tps65090 charger driver. This driver is
responsible for controlling the charger aspect of the tps65090 mfd.
Currently, this mainly consists of turning on and off the charger, but
some features of the charger can be supported through this driver
including:
- Enable Auto Recharge based on Battery voltage
- Fast Charge Safety Timer
- Maximum battery discharge current
- Maximum battery adapter current
- Enable External Charge
- Disable charging termination based on low charger current (supported)
Once the driver is accepted, later patches can add support for the
features above which are not yet supported.
Based on work by:
Syed Rafiuddin <srafiuddin@nvidia.com>
Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.
[ kishon@ti.com : fixed a linking error due
to original patch forgetting to change
drivers/usb/Makefile ]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
