It can be used exactly like L3GD20 but it has a different WhoAmI
register value.
Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When using generic_buffer to read data, the scale is not properly
detected for scale shared by type. This is caused by a problem
with the generation of generic name out of the full name.
E.g.: for current->name in_accel_z, the extracted generic name
is "in" (when it should be "in_accel"). This is used in generic_buffer
to generate scale and offset paths (in_accel_scale).
Consider the in_ or out_ prefix when extracting the generic name
from the full name.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds ABI documentation entries for in_rot_offset.
At least one user for these is present that is the HID Sensors Driver.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
MAX520 and MAX521 are protocol-compatible with the already supported
chips, just have more channels.
Signed-off-by: Antonio Fiol <antonio@fiol.es>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patchset adds ABI documentation for the following attributes:
in_illuminance_scale, used atleast once in al3320a staging/iio/light/
in_illuminance_calibscale, used atleast once in cm32181
in_illuminance_input, used in cm3232 at least once
in_illuminance_raw used atleast once in al3320a
in_illuminance_clear_raw and in_illuminance_ir_raw exposed by
gp2ap020a00f with modifiers IIO_MOD_LIGHT_CLEAR and
IIO_MOD_LIGHT_IR respectively.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This adds support for the LIS3LV02 accelerometer found in the
ST Microelectronics Nomadik board series.
Cc: devicetree@vger.kernel.org
Cc: Denis CIOCCA <denis.ciocca@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch fixes the checkpatch.pl error:
ERROR: trailing statements should be on next line
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl error:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warnings:
ERROR: space required before the open parenthesis '('
+ switch(divisor) {
ERROR: space required before the open parenthesis '('
+ switch(divisor) {
ERROR: space required before the open parenthesis '('
+ switch(reg) {
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the checkpatch.pl warning:
ERROR: space required before the open parenthesis '('
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warnings:
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '<=' (ctx:VxV)
ERROR: spaces required around that '>' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: space required after that ';' (ctx:VxV)
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl errors:
ERROR: that open brace { should be on the previous line
ERROR: else should follow close brace '}'
WARNING: braces {} are not necessary for single statement blocks
ERROR: space required before the open brace '{'
Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the comparison is always true as the dev_t has been initialized in the
init function and we are sending that initialized dev_t to the
cleanup().
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the global variable majordev is no longer required, as it is not being
used anywhere.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the dev_t was being stored in visorchipset_platform_device.dev.devt
while initializing the module. so pass that value as an argument to
cleanup() so that it can use this local variable instead of the global
variable.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we are getting dev_t as an argument in the function, so use the local
variable instead of the global variable "majordev".
this global variable will be removed in one of the next patch of the
series.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove the variable "registered", which was used in the cleanup() to
detect if the driver has successfully initialized. the cleanup()
is called from module_exit, so its obvious that the module has
successfully initialized. if the initialization had failed, then
we will never be in the cleanup().
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove these flow hiding macros.
Miscellanea:
o Add a macro and function to replace a large inline
o Simplify #includes
o Add trace.c and update Makefile
o Remove static inline filename function and use kbasename instead
This reduces object size quite a lot: ~350KB (x86-64 allyesconfig)
$ size drivers/staging/rts5208/built-in.o*
text data bss dec hex filename
248385 36728 77888 363001 589f9 drivers/staging/rts5208/built-in.o.new
506691 83352 115896 705939 ac593 drivers/staging/rts5208/built-in.o.old
Done via coccinelle script and some typing.
@@
expression chip;
expression ret;
@@
- TRACE_RET(chip, ret);
+ rtsx_trace(chip);
+ return ret;
@@
expression chip;
identifier label;
@@
- TRACE_GOTO(chip, label);
+ rtsx_trace(chip);
+ goto label;
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was generated by 'make coccicheck' using scripts at
scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Niranjan Dighe <niranjan.dighe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an rt_trace function using %pV to reduce overall code size.
Update the macro uses to remove unnecessary and now harmful parentheses.
Miscellanea around these changes:
o Coalesce formats
o Realign arguments
o Remove commented-out RT_TRACE uses
o Spelling fixes in formats
o Add missing newlines to formats
o Remove multiple newlines from formats
o Neaten formats where noticed
o Use %pM in one instance
Reduces code size ~20KB
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change function definition to match its prototype declaration. This
fixes the following warning generated by sparse:
drivers/staging/rtl8192u/r8192U_core.c:1970:6: warning: symbol
'rtl8192_update_ratr_table' was not declared. Should it be static?
Signed-off-by: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function 'ieee80211_check_auth_response' is used only in this
file, so make it static. This patch fixes the following sparse
warning.
'ieee80211_check_auth_response' was not declared. Should it be static?
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errors are correctly handled in oz_cdev_register() and oz_protocol_init(),
but then they are ignored in ozwpan_init().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The condition pxmitpriv->hwxmit_entry == 5 is always false because
HWXMIT_ENTRY is always 4.
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the standard vsprintf kernel extension to format
mac addresses.
This reduces object code size a bit.
Miscellanea:
o Coalesce formats
o Realign arguments
o Remove the now unused MAC_FMT and MAC_ARG #defines
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix spelling typo in comment and printk within fbtft
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following errors by refactoring the comments'
style:
WARNING: line over 80 characters
ERROR: code indent should use tabs where possible
Signed-off-by: Cláudio Maia <crrm@isep.ipp.pt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
WARNING: line over 80 characters
Signed-off-by: Cláudio Maia <crrm@isep.ipp.pt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unnecessary spinlock helper function and instead
calls spin_lock and spin_unlock directly.
This does *not* resolve sparse warnings about context imbalances but these are
spurious.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch annotates pointers as referring to I/O mapped memory where they ought
to be, removes now unnecessary ugly casts, eliminates an incorrect deref on I/O
mapped memory by using iowrite16 instead, and updates the pointer arithmetic
accordingly to take into account that the pointers are now byte-sized. This
fixes the following sparse warnings:-
drivers/staging/sm750fb/sm750_cursor.c:113:19: warning: cast removes address space of expression
drivers/staging/sm750fb/sm750_cursor.c:204:19: warning: cast removes address space of expression
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unused hw712_fillrect function. This patch fixes
the following sparse warning:-
drivers/staging/sm750fb/sm750_accel.c:95:5: warning: symbol 'hw712_fillrect' was not declared. Should it be static?
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch declares externally unavailable functions static. This fixes
the following sparse warnings:-
drivers/staging/sm750fb/ddk750_hwi2c.c:63:6: warning: symbol 'hwI2CWaitTXDone' was not declared. Should it be static?
drivers/staging/sm750fb/ddk750_hwi2c.c:93:14: warning: symbol 'hwI2CWriteData' was not declared. Should it be static?
drivers/staging/sm750fb/ddk750_hwi2c.c:160:14: warning: symbol 'hwI2CReadData' was not declared. Should it be static?
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch takes into account that cursor->vstart, crtc->vScreen and
share->pvMem are pointers to memory-mapped I/O and thus we should use memset_io
to make this explicit. In addition, some architectures require special treatment
of memory-mapped I/O so the previous code could actually break without this
change.
This fixes the following sparse warnings:-
drivers/staging/sm750fb/sm750.c:489:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:490:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:501:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:502:17: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:833:5: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/sm750fb/sm750.c:1154:9: warning: incorrect type in argument 1 (different address spaces)
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xattr cached data may be gone, but lock still held, in this case,
refetch xattr from server, otherwise client will return error.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-on: http://review.whamcloud.com/12952
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mtime/atime/ctime in the write RPC has to be updated after
the RPC is built (where xid is generated), otherwise, it could
race with the setattr and updating wrong timestamps on OST side.
Seems this regression was introduced when landing clio code.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/13261
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5951
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a new inode, the i_size is 0 until a stat, which will yield
an empty fiemap result.
Fix the issue by glimpsing the size before doing fiemap.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13439
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6091
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Client doesn't restore import state correctly
on reconnect during replay. It resends lock replay
when final ping was queued by server.
Server fails with "target_queue_recovery_request())
ASSERTION( req->rq_export->exp_lock_replay_needed ) failed"
Add imp_replay_state to store last replay state.
imp_state is restored from imp_replay_state
during reconnect.
Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Xyratex-bug-id: MRP-2022
Reviewed-on: http://review.whamcloud.com/12163
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5651
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some object maybe has a corrupted LOV EA or a hole in
LOV EA. We should not crash client in such case.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/12740
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4958
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lustre_start_mgc() creates MGC device, if error happens later on
ll_fill_super(), this device is still attached, and later mount
fails by keep complaining that the MGC device's already in the
client node.
It turns out that the device was referenced by mgc config llog data
which is arranged in the mgc lock requeue thread re-trying to get its
mgc lock, and in normal case, this llog reference only released in
mgc_blocking_ast() when the system is umount.
This patch make mgc_precleanup() to wake up requeue thread to handle
the config llog data.
This patch also makes mgc_setup() wait for mgc_requeue_thread() start
before moving on.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/11765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4943
Reviewed-by: Ryan Haasken <haasken@cray.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in lprocfs_mgc_rd_ir_state, the import state should be checked
the validity before doing further work.
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/12896
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5650
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If early reply of client RPC is lost and client RPC is expired and
resent, server will drop the resent RPC because it's already in
processing, server may also send reply or early reply to client,
which can still match reply buffer of the original request.
In this case, client is measuring time from resent time, but server
is reporting service time of original RPC, which is longer than
the time measured by client.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/12855
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5545
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have found that posix_acl_access can have a value
of \002\000\000\000. In that case body->aclsize is
non-zero, but the there are no actuall acls stored
in the xattr.
In mdc_unpack_acl(), it only checks IS_ERR() on the
pointer returned by posix_acl_from_xattr(), it does not
check for NULL. Because of the above situation, the
xattr aclsize can be non-zero, but posic_acl_from_xattr()
still returns NULL. Passing NULL to posix_acl_valid()
crashes the kernel.
We add a check to properly handle the NULL return value.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/11989
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5150
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By using osc_io_unplug_aync() for osc_queue_sync_pages() to shorten
the IO calling path, to reduce the chance of stack overflow.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-on: http://review.whamcloud.com/11612
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3188
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
