Commit af033b2aa8a8 ("f2fs: guarantee journalled quota data by checkpoint")
added function is_journalled_quota() in f2fs.h, but it located outside of
_LINUX_F2FS_H macro coverage, it has been fixed with commit 0af725fcb77a
("f2fs: fix wrong #endif").
But anyway, in order to avoid making same mistake latter, let's add single
line comment to notice which #if the last #endif is corresponding to.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Remove unnecessary empty EOL]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Hagbard Celine reported:
Hi, this is a long standing bug that I've hit before on older kernels,
but I was not able to get the syslog saved because of the nature of
the bug. This time I had booted form a pen-drive, and was able to save
the log to it's efi-partition.
What i did to trigger it was to create a partition and format it f2fs,
then mount it with options:
"rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict".
Then I unpacked a big .tar.xz to the partition (I used a
gentoo-stage3-tarball as I was in process of installing Gentoo).
Same options just without data_flush gives no problems.
Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not
properly unmounted. Some data may be corrupt. Please run fsck.
Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest
stack depth: 12064 bytes left
Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at
00000000a4b0733c (stack is 0000000056016422..0000000096e7463f)
Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow
......
Mar 20 21:06:40 usbgentoo kernel: Call Trace:
Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50
Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0
Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0
Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0
Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0
Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690
......
Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340
Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220
Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0
Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0
Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000
Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20
Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0
Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70
Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0
Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0
Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330
Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130
Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60
Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40
The root cause is that we run into an infinite recursive calling in
between f2fs_balance_fs_bg and writepage() as described below:
- f2fs_write_data_pages --- A
- __write_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg --- B
- f2fs_sync_dirty_inodes
- filemap_fdatawrite
- f2fs_write_data_pages --- A
...
- f2fs_balance_fs_bg --- B
...
In order to fix this issue, let's detect such condition in __write_data_page()
and just skip calling f2fs_balance_fs() recursively.
Reported-by: Hagbard Celine <hagbardcelin@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_hw_support_discard() only tests if the super block device supports
discard. However, for a multi-device volume, not all disks used may
support discard. Improve the check performed to test all devices of
the volume and report discard as supported if at least one device of
the volume supports discard. To implement this, introduce the helper
function f2fs_bdev_support_discard(), which returns true for zoned block
devices (where discard is processed as a zone reset) and for regular
disks supporting the discard command.
f2fs_bdev_support_discard() is also used in __queue_discard_cmd() to
handle discard command issuing for a particular device of the volume.
That is, prevent issuing a discard command for block devices that do
not support it.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For zoned block devices, an array of zone types for each device is
allocated and initialized in order to determine if a section is stored
on a sequential zone (zone reset needed) or a conventional zone (no
zone reset needed and regular discard applies). Considering this usage,
the zone types stored in memory can be replaced with a bitmap to
indicate an equivalent information, that is, if a zone is sequential or
not. This reduces the memory usage for each zoned device by roughly 8:
on a 14TB disk with zones of 256 MB, the zone type array consumes
13x4KB pages while the bitmap uses only 2x4KB pages.
This patch changes the f2fs_dev_info structure blkz_type field to the
bitmap blkz_seq. Access to this bitmap is done using the helper
function f2fs_blkz_is_seq(), which is a rewrite of the function
get_blkz_type().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added missing lock to avoid race conditon for dqbuf and
streamon
CRs-Fixed: 2376566
Change-Id: I1c0ef9014914a9892c4d443600618c52d0aeebfa
Signed-off-by: VijayaKumar T M <vtmuni@codeaurora.org>
While processing a packet containing command request, buffer size
need to be checked against size of the command structures that is
being parsed to prevent possible out of bound access.
CRs-Fixed: 2432633
Change-Id: I048bdbd0c096a6d03501bdd5b1d2d4bb50d45dd6
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Add required support in ksbridge driver to send uevent with vendor id
and product id details.
Change-Id: I22974dfa63665e6ddcbda2f7d11c68f716c1c760
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
set_page_dirty() is racy if the caller has no
reference against page->mapping->host, and if
the page is unlocked. This is because another
CPU could truncate the page off the mapping and
then free the mapping.
Use set_page_dirty_lock() to avoid this race condition.
Change-Id: I517fb9aee66560618c7676b311368f7a7498011f
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Signed-off-by: Archana Sriram <apsrir@codeaurora.org>
This change is done to fix null pointer dereference
in sde_core_irq_preinstall().
Change-Id: I448e275e2ce5708738651d1cf7f66329bcf47451
Signed-off-by: Rahul Sharma <rahsha@codeaurora.org>
In some cases when connecting to a test fixture the host port
might not have triggered a connect change. As a result, dev->portnum
does not get updated and an attempt to enable the port for
compliance mode will pass 0 as the port number to the HCD, which is
invalid. Instead allow the user to pass an explicit port number
from the command line to specify the port to act on. Otherwise, if
omitted, the behavior is the same as before.
Change-Id: I2e323c9016915b2d535ac227fd6f3d5846aa4026
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add support for the SuperSpeed Link Layer test case TD.7.34
which requires the operator to place the port into compliance
mode, and to subsequently bring it out via reset. Historically
according to the (now deprecated) USB 3.0 specification a
SuperSpeed host downstream port would automatically transition
to Compliance mode from the Polling state if LFPS polling times
out. However the language in USB 3.1 as well as xHCI 1.1 states
it may be required to explicitly enable this transition. For
such hosts this is done by sending a SET_FEATURE(PORT_LINK_STATE)
with the state set to Compliance to the root hub port.
Similar to the other supported commands, to do this via sysfs:
echo > /sys/bus/usb/devices/2-0\:1.0/enable_compliance
According to xHCI 1.1 section 4.19.1.2.4.1, this enables the
transition to compliance mode upon LFPS timeout. Note that this
can only be issued when the port is in disconnected state. And
in order to disable this behavior on subsequent transitions, a
warm reset should be issued. So add another entry to do that:
echo > /sys/bus/usb/devices/2-0\:1.0/warm_reset
In general these attributes can also be useful for other USB
SuperSpeed compliance tests such as electrical and eye diagram
testing which require CPn patterns to be transmitted.
Change-Id: I550a4064f90bc640f80e46c7251bcdbc0797c354
Signed-off-by: Jack Pham <jackp@codeaurora.org>
To perform SuperSpeed compliance testing the port should first
be placed into compliance mode. For xHCI 1.0 and prior this
transition happens automatically when the port is in Training
and encounters an LFPS timeout. Thus running compliance tests
against a test appliance may simply just work by simply plugging
in to the downstream port.
However starting with xHCI 1.1 the transition from Polling.LFPS
to compliance mode may be disabled by default and needs to be
explicitly enabled by writing to the PLS field of the PORTSC
register, which sets an internal 'CTE' (Compliance Transition
Enabled) flag so that the port will perform the transition the
next time it encounters LFPS timeout. Whether this is disabled or
not is determined by the 'CTC' (Compliance Transition Capability)
bit in the HCCPARAMS2 capability register.
In order to allow a test operator to change this if needed, allow
a test driver (such as drivers/usb/misc/lvstest.c) to send a
SET_FEATURE(PORT_LINK_STATE) control message to the root hub to
update the link state prior to connecting to the port. Subsequently,
placing the port in warm reset would then disable the flag.
Change-Id: I798b978f05a79b52648b650ec8111a065d7e369e
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
This change will enable below configs for msm8996
radio support.
CONFIG_MEDIA_RADIO_SUPPORT
CONFIG_RADIO_SILABS
Change-Id: Iff6431efc750aafd73fef129948f054d03d6ca0d
Signed-off-by: Naitik Bharadiya <bharad@codeaurora.org>
This change will add Silab FM radio support for msm8996.
This implementation is based on snapshot of msm-3.18
commit c3b4e280715e
("radio: Add snapshot of Silabs FM radio support").
Change-Id: I25af7904906446c72eda32aea136ab12a9d335b8
Signed-off-by: Naitik Bharadiya <bharad@codeaurora.org>
During pdr case wlan host driver is not doing the cleanup of
ipa module. So after sap mode recovery in pdr case
data packets are not going on ipa path even ipa is enabled.
To address this issue send pdr indication to wlan host driver.
Change-Id: Ib0480870d3218da61edb0309725787c0382957ab
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
This will enable memlat_cpu0 & msmlat_cpu2.
The governor expects a "qcom,core-dev-table" table as part of a given
memlat hardware monitor's device tree node.
This table is read upon registration of the memlat governor. The table
is then used to determine the memory bandwidth vote corresponding to the
maximum of the core frequencies.
Change-Id: If2f3d86a830e8c2fcd341510e93eb32b41c18812
Signed-off-by: Rahul Shahare <rshaha@codeaurora.org>
Currently, if processing an SG table consumes more memory
than can fit in the pre-allocated buffer, then calls to
hyp_assign_table() will fail as if there were not enough
memory available to process the request.
Instead, for every call to hyp assign, allocate enough
memory to process the maximum batch size, and process large
SG tables in pieces, using this memory. This avoids failures
due to large SG tables. Also, since the memory for handling
these requests is now allocated per hyp_assign_table() call,
we can drop the pre-allocated buffer, as it is no longer in
use.
Change-Id: Ie9899a5e2c8de6127707609101f5fb557e3f0533
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Interface change to expose idle restart/shutdown APIs for WLAN
driver. This patch is to provide API interface to ease compilation
issues among various branches of kernel and WLAN driver. The actual
implementation will be in a separate patch.
Change-Id: I7f4a0079c32875c362d36c9f794d55609f924198
Signed-off-by: Yue Ma <yuem@codeaurora.org>
The max speed for the USB device is high speed. So
the device is always enumerated in high speed indpendent
of the connection. Fix this by setting the EXTCON_USB_SPEED
to 1 which in turn sets the max speed as super speed.
Change-Id: I9bf935add569f70c14bf9cd4197d6e86163da6f5
Signed-off-by: Naitik Bharadiya <bharad@codeaurora.org>
Move bluetooth node under /vendor path. This will help in overlaying
this node from board overlay files.
Change-Id: Iedb2e8b9e1fa47257fb97e2c230b9d62c3e492af
Signed-off-by: Naitik Bharadiya <bharad@codeaurora.org>
* refs/heads/tmp-aab9adb
Linux 4.4.179
kernel/sysctl.c: fix out-of-bounds access when setting file-max
Revert "locking/lockdep: Add debug_locks check in __lock_downgrade()"
ALSA: info: Fix racy addition/deletion of nodes
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
device_cgroup: fix RCU imbalance in error case
sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup
Revert "kbuild: use -Oz instead of -Os when using clang"
mac80211: do not call driver wake_tx_queue op during reconfig
kprobes: Fix error check when reusing optimized probes
kprobes: Mark ftrace mcount handler functions nokprobe
x86/kprobes: Verify stack frame on kretprobe
arm64: futex: Restore oldval initialization to work around buggy compilers
crypto: x86/poly1305 - fix overflow during partial reduction
ALSA: core: Fix card races between register and disconnect
staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
staging: comedi: ni_usb6501: Fix use of uninitialized mutex
staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
staging: comedi: vmk80xx: Fix use of uninitialized semaphore
io: accel: kxcjk1013: restore the range after resume.
iio: adc: at91: disable adc channel interrupt in timeout case
iio: ad_sigma_delta: select channel when reading register
iio/gyro/bmg160: Use millidegrees for temperature scale
KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU
tpm/tpm_i2c_atmel: Return -E2BIG when the transfer is incomplete
modpost: file2alias: check prototype of handler
modpost: file2alias: go back to simple devtable lookup
crypto: crypto4xx - properly set IV after de- and encrypt
ipv4: ensure rcu_read_lock() in ipv4_link_failure()
ipv4: recompile ip options in ipv4_link_failure
tcp: tcp_grow_window() needs to respect tcp_space()
net: fou: do not use guehdr after iptunnel_pull_offloads in gue_udp_recv
net: bridge: multicast: use rcu to access port list from br_multicast_start_querier
net: atm: Fix potential Spectre v1 vulnerabilities
bonding: fix event handling for stacked bonds
appletalk: Fix compile regression
ovl: fix uid/gid when creating over whiteout
tpm/tpm_crb: Avoid unaligned reads in crb_recv()
include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
lib/div64.c: off by one in shift
appletalk: Fix use-after-free in atalk_proc_exit
ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
iommu/dmar: Fix buffer overflow during PCI bus notification
crypto: sha512/arm - fix crash bug in Thumb2 build
crypto: sha256/arm - fix crash bug in Thumb2 build
cifs: fallback to older infolevels on findfirst queryinfo retry
ACPI / SBS: Fix GPE storm on recent MacBookPro's
ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
serial: uartps: console_setup() can't be placed to init section
f2fs: fix to do sanity check with current segment number
9p locks: add mount option for lock retry interval
9p: do not trust pdu content for stat item size
rsi: improve kernel thread handling to fix kernel panic
ext4: prohibit fstrim in norecovery mode
fix incorrect error code mapping for OBJECTID_NOT_FOUND
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
iommu/vt-d: Check capability before disabling protected memory
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/hpet: Prevent potential NULL pointer dereference
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test
perf evsel: Free evsel->counts in perf_evsel__exit()
perf top: Fix error handling in cmd_top()
tools/power turbostat: return the exit status of a command
thermal/int340x_thermal: fix mode setting
thermal/int340x_thermal: Add additional UUIDs
ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
mmc: davinci: remove extraneous __init annotation
IB/mlx4: Fix race condition between catas error reset and aliasguid flows
ALSA: sb8: add a check for request_region
ALSA: echoaudio: add a check for ioremap_nocache
ext4: report real fs size after failed resize
ext4: add missing brelse() in add_new_gdb_meta_bg()
perf/core: Restore mmap record type correctly
PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
xtensa: fix return_address
sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
xen: Prevent buffer overflow in privcmd ioctl
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
ARM: dts: at91: Fix typo in ISC_D0 on PC9
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
block: do not leak memory in bio_copy_user_iov()
ASoC: fsl_esai: fix channel swap issue when stream starts
include/linux/bitrev.h: fix constant bitrev
ALSA: seq: Fix OOB-reads from strlcpy
ip6_tunnel: Match to ARPHRD_TUNNEL6 for dev type
net: ethtool: not call vzalloc for zero sized memory request
netns: provide pure entropy for net_hash_mix()
tcp: Ensure DCTCP reacts to losses
sctp: initialize _pad of sockaddr_in before copying to user memory
qmi_wwan: add Olicard 600
openvswitch: fix flow actions reallocation
net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock().
ipv6: sit: reset ip header pointer in ipip6_rcv
ipv6: Fix dangling pointer when ipv6 fragment
tty: ldisc: add sysctl to prevent autoloading of ldiscs
tty: mark Siemens R3964 line discipline as BROKEN
lib/string.c: implement a basic bcmp
x86/vdso: Drop implicit common-page-size linker flag
x86: vdso: Use $LD instead of $CC to link
x86/build: Specify elf_i386 linker emulation explicitly for i386 objects
kbuild: clang: choose GCC_TOOLCHAIN_DIR not on LD
binfmt_elf: switch to new creds when switching to new mm
drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers
dmaengine: tegra: avoid overflow of byte tracking
x86/build: Mark per-CPU symbols as absolute explicitly for LLD
wlcore: Fix memory leak in case wl12xx_fetch_firmware failure
regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting
media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration
netfilter: physdev: relax br_netfilter dependency
dmaengine: imx-dma: fix warning comparison of distinct pointer types
hpet: Fix missing '=' character in the __setup() code of hpet_mmap_enable
soc/tegra: fuse: Fix illegal free of IO base address
hwrng: virtio - Avoid repeated init of completion
media: mt9m111: set initial frame size other than 0x0
tty: increase the default flip buffer limit to 2*640K
ARM: avoid Cortex-A9 livelock on tight dmb loops
mt7601u: bump supported EEPROM version
soc: qcom: gsbi: Fix error handling in gsbi_probe()
ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe
cdrom: Fix race condition in cdrom_sysctl_register
fbdev: fbmem: fix memory access if logo is bigger than the screen
bcache: improve sysfs_strtoul_clamp()
bcache: fix input overflow to sequential_cutoff
bcache: fix input overflow to cache set sysfs file io_error_halflife
ALSA: PCM: check if ops are defined before suspending PCM
ARM: 8833/1: Ensure that NEON code always compiles with Clang
kprobes: Prohibit probing on bsearch()
leds: lp55xx: fix null deref on firmware load failure
media: mx2_emmaprp: Correct return type for mem2mem buffer helpers
media: s5p-g2d: Correct return type for mem2mem buffer helpers
media: s5p-jpeg: Correct return type for mem2mem buffer helpers
media: sh_veu: Correct return type for mem2mem buffer helpers
SoC: imx-sgtl5000: add missing put_device()
perf test: Fix failure of 'evsel-tp-sched' test on s390
scsi: megaraid_sas: return error when create DMA pool failed
IB/mlx4: Increase the timeout for CM cache
e1000e: Fix -Wformat-truncation warnings
mmc: omap: fix the maximum timeout setting
ARM: 8840/1: use a raw_spinlock_t in unwind
coresight: etm4x: Add support to enable ETMv4.2
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
usb: chipidea: Grab the (legacy) USB PHY by phandle first
tools lib traceevent: Fix buffer overflow in arg_eval
fs: fix guard_bio_eod to check for real EOD errors
cifs: Fix NULL pointer dereference of devname
dm thin: add sanity checks to thin-pool and external snapshot creation
cifs: use correct format characters
fs/file.c: initialize init_files.resize_wait
f2fs: do not use mutex lock in atomic context
ocfs2: fix a panic problem caused by o2cb_ctl
mm/slab.c: kmemleak no scan alien caches
mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!
mm/page_ext.c: fix an imbalance with kmemleak
mm/cma.c: cma_declare_contiguous: correct err handling
enic: fix build warning without CONFIG_CPUMASK_OFFSTACK
sysctl: handle overflow for file-max
gpio: gpio-omap: fix level interrupt idling
tracing: kdb: Fix ftdump to not sleep
h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
CIFS: fix POSIX lock leak and invalid ptr deref
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
Bluetooth: Fix decrementing reference count twice in releasing socket
i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
tty/serial: atmel: Add is_half_duplex helper
lib/int_sqrt: optimize initial value compute
ext4: cleanup bh release code in ext4_ind_remove_space()
arm64: debug: Ensure debug handlers check triggering exception level
arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
Make arm64 serial port config compatible with crosvm
Fix merge issue with 4.4.178
Fix merge issue with 4.4.177
ANDROID: cuttlefish_defconfig: Enable CONFIG_OVERLAY_FS
Change-Id: I0d6e7b00f0198867803d5fe305ce13e205cc7518
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Makes a file /proc/lowmemorykiller available for polling by user space.
Immediately as a process is killed by lowmemorykiller information about
that process is pushed to the file. It contains information about the
process at the time it was killed, to be gathered as metrics.
The file is expected to be continuously read from. To prevent failure
to do so from causing memory to be continuously consumed, after eight
processes have been killed, no more events will be logged until the
file is read from again.
The format is integers separated by spaces:
Field 0 pid
The identifier of the process.
Field 1 uid
The UNIX ID of the user the process was running under.
Field 2 group_leader_pid
The group leader of the process.
Field 3 min_flt
The number of minor page faults.
Field 4 maj_flt
The number of minor page faults.
Field 5 rss_in_pages
The Resident Set Size in pages.
Field 6 oom_score_adj
The adjusted Out Of Memory score.
Field 7 start_time
The number of nanoseconds that the process ran for.
--New line--
Field 8 taskname
The cmd line used to launch the process, truncated to 127 characters,
and terminated by a new line.
Bug: 130017100
Test: Tested manually
Change-Id: I461b191eda9e578b9d2c2d1843b1b81948353a95
Signed-off-by: Jim Blackler <jimblackler@google.com>
Validate the buffer size against the parsing command structure size
before parsing to prevent possible out of bound error case.
CRs-Fixed: 2437341
Change-Id: I31c9a556539fce403691294a76160ae4936e7065
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Add the check before starting workqueue
to load ipa/gsi-fws to avoid the smmu
assert.
Change-Id: Icdea2df4ea30bc154bf539c3016fb08defce4c55
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Signed-off-by: Ashok Vuyyuru <avuyyuru@codeaurora.org>
Check the size of ADSP payload before accessing it.
CRs-Fixed: 2380694
Change-Id: Icdc19a85b39a397ba6d7177f42ece4626b901832
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=pJ1x
-----END PGP SIGNATURE-----
Merge 4.4.179 into android-4.4
Changes in 4.4.179
arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
arm64: debug: Ensure debug handlers check triggering exception level
ext4: cleanup bh release code in ext4_ind_remove_space()
lib/int_sqrt: optimize initial value compute
tty/serial: atmel: Add is_half_duplex helper
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
Bluetooth: Fix decrementing reference count twice in releasing socket
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
CIFS: fix POSIX lock leak and invalid ptr deref
h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
tracing: kdb: Fix ftdump to not sleep
gpio: gpio-omap: fix level interrupt idling
sysctl: handle overflow for file-max
enic: fix build warning without CONFIG_CPUMASK_OFFSTACK
mm/cma.c: cma_declare_contiguous: correct err handling
mm/page_ext.c: fix an imbalance with kmemleak
mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!
mm/slab.c: kmemleak no scan alien caches
ocfs2: fix a panic problem caused by o2cb_ctl
f2fs: do not use mutex lock in atomic context
fs/file.c: initialize init_files.resize_wait
cifs: use correct format characters
dm thin: add sanity checks to thin-pool and external snapshot creation
cifs: Fix NULL pointer dereference of devname
fs: fix guard_bio_eod to check for real EOD errors
tools lib traceevent: Fix buffer overflow in arg_eval
usb: chipidea: Grab the (legacy) USB PHY by phandle first
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
coresight: etm4x: Add support to enable ETMv4.2
ARM: 8840/1: use a raw_spinlock_t in unwind
mmc: omap: fix the maximum timeout setting
e1000e: Fix -Wformat-truncation warnings
IB/mlx4: Increase the timeout for CM cache
scsi: megaraid_sas: return error when create DMA pool failed
perf test: Fix failure of 'evsel-tp-sched' test on s390
SoC: imx-sgtl5000: add missing put_device()
media: sh_veu: Correct return type for mem2mem buffer helpers
media: s5p-jpeg: Correct return type for mem2mem buffer helpers
media: s5p-g2d: Correct return type for mem2mem buffer helpers
media: mx2_emmaprp: Correct return type for mem2mem buffer helpers
leds: lp55xx: fix null deref on firmware load failure
kprobes: Prohibit probing on bsearch()
ARM: 8833/1: Ensure that NEON code always compiles with Clang
ALSA: PCM: check if ops are defined before suspending PCM
bcache: fix input overflow to cache set sysfs file io_error_halflife
bcache: fix input overflow to sequential_cutoff
bcache: improve sysfs_strtoul_clamp()
fbdev: fbmem: fix memory access if logo is bigger than the screen
cdrom: Fix race condition in cdrom_sysctl_register
ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe
soc: qcom: gsbi: Fix error handling in gsbi_probe()
mt7601u: bump supported EEPROM version
ARM: avoid Cortex-A9 livelock on tight dmb loops
tty: increase the default flip buffer limit to 2*640K
media: mt9m111: set initial frame size other than 0x0
hwrng: virtio - Avoid repeated init of completion
soc/tegra: fuse: Fix illegal free of IO base address
hpet: Fix missing '=' character in the __setup() code of hpet_mmap_enable
dmaengine: imx-dma: fix warning comparison of distinct pointer types
netfilter: physdev: relax br_netfilter dependency
media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration
regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting
wlcore: Fix memory leak in case wl12xx_fetch_firmware failure
x86/build: Mark per-CPU symbols as absolute explicitly for LLD
dmaengine: tegra: avoid overflow of byte tracking
drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers
binfmt_elf: switch to new creds when switching to new mm
kbuild: clang: choose GCC_TOOLCHAIN_DIR not on LD
x86/build: Specify elf_i386 linker emulation explicitly for i386 objects
x86: vdso: Use $LD instead of $CC to link
x86/vdso: Drop implicit common-page-size linker flag
lib/string.c: implement a basic bcmp
tty: mark Siemens R3964 line discipline as BROKEN
tty: ldisc: add sysctl to prevent autoloading of ldiscs
ipv6: Fix dangling pointer when ipv6 fragment
ipv6: sit: reset ip header pointer in ipip6_rcv
net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock().
openvswitch: fix flow actions reallocation
qmi_wwan: add Olicard 600
sctp: initialize _pad of sockaddr_in before copying to user memory
tcp: Ensure DCTCP reacts to losses
netns: provide pure entropy for net_hash_mix()
net: ethtool: not call vzalloc for zero sized memory request
ip6_tunnel: Match to ARPHRD_TUNNEL6 for dev type
ALSA: seq: Fix OOB-reads from strlcpy
include/linux/bitrev.h: fix constant bitrev
ASoC: fsl_esai: fix channel swap issue when stream starts
block: do not leak memory in bio_copy_user_iov()
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
ARM: dts: at91: Fix typo in ISC_D0 on PC9
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
xen: Prevent buffer overflow in privcmd ioctl
sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
xtensa: fix return_address
PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
perf/core: Restore mmap record type correctly
ext4: add missing brelse() in add_new_gdb_meta_bg()
ext4: report real fs size after failed resize
ALSA: echoaudio: add a check for ioremap_nocache
ALSA: sb8: add a check for request_region
IB/mlx4: Fix race condition between catas error reset and aliasguid flows
mmc: davinci: remove extraneous __init annotation
ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
thermal/int340x_thermal: Add additional UUIDs
thermal/int340x_thermal: fix mode setting
tools/power turbostat: return the exit status of a command
perf top: Fix error handling in cmd_top()
perf evsel: Free evsel->counts in perf_evsel__exit()
perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
x86/hpet: Prevent potential NULL pointer dereference
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
iommu/vt-d: Check capability before disabling protected memory
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
fix incorrect error code mapping for OBJECTID_NOT_FOUND
ext4: prohibit fstrim in norecovery mode
rsi: improve kernel thread handling to fix kernel panic
9p: do not trust pdu content for stat item size
9p locks: add mount option for lock retry interval
f2fs: fix to do sanity check with current segment number
serial: uartps: console_setup() can't be placed to init section
ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
ACPI / SBS: Fix GPE storm on recent MacBookPro's
cifs: fallback to older infolevels on findfirst queryinfo retry
crypto: sha256/arm - fix crash bug in Thumb2 build
crypto: sha512/arm - fix crash bug in Thumb2 build
iommu/dmar: Fix buffer overflow during PCI bus notification
ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
appletalk: Fix use-after-free in atalk_proc_exit
lib/div64.c: off by one in shift
include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
tpm/tpm_crb: Avoid unaligned reads in crb_recv()
ovl: fix uid/gid when creating over whiteout
appletalk: Fix compile regression
bonding: fix event handling for stacked bonds
net: atm: Fix potential Spectre v1 vulnerabilities
net: bridge: multicast: use rcu to access port list from br_multicast_start_querier
net: fou: do not use guehdr after iptunnel_pull_offloads in gue_udp_recv
tcp: tcp_grow_window() needs to respect tcp_space()
ipv4: recompile ip options in ipv4_link_failure
ipv4: ensure rcu_read_lock() in ipv4_link_failure()
crypto: crypto4xx - properly set IV after de- and encrypt
modpost: file2alias: go back to simple devtable lookup
modpost: file2alias: check prototype of handler
tpm/tpm_i2c_atmel: Return -E2BIG when the transfer is incomplete
KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU
iio/gyro/bmg160: Use millidegrees for temperature scale
iio: ad_sigma_delta: select channel when reading register
iio: adc: at91: disable adc channel interrupt in timeout case
io: accel: kxcjk1013: restore the range after resume.
staging: comedi: vmk80xx: Fix use of uninitialized semaphore
staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
staging: comedi: ni_usb6501: Fix use of uninitialized mutex
staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
ALSA: core: Fix card races between register and disconnect
crypto: x86/poly1305 - fix overflow during partial reduction
arm64: futex: Restore oldval initialization to work around buggy compilers
x86/kprobes: Verify stack frame on kretprobe
kprobes: Mark ftrace mcount handler functions nokprobe
kprobes: Fix error check when reusing optimized probes
mac80211: do not call driver wake_tx_queue op during reconfig
Revert "kbuild: use -Oz instead of -Os when using clang"
sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup
device_cgroup: fix RCU imbalance in error case
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
ALSA: info: Fix racy addition/deletion of nodes
Revert "locking/lockdep: Add debug_locks check in __lock_downgrade()"
kernel/sysctl.c: fix out-of-bounds access when setting file-max
Linux 4.4.179
Change-Id: Ib81a248d73ba7504649be93bd6882b290e548882
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
