* refs/heads/tmp-26c8156:
Linux 4.4.49
drm/i915: fix use-after-free in page_flip_completed()
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
ALSA: seq: Fix race at creating a queue
xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
scsi: mpt3sas: disable ASPM for MPI2 controllers
scsi: aacraid: Fix INTx/MSI-x issue with older controllers
scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
netvsc: Set maximum GSO size in the right place
mac80211: Fix adding of mesh vendor IEs
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
target: Fix early transport_generic_handle_tmr abort scenario
target: Use correct SCSI status during EXTENDED_COPY exception
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
hns: avoid stack overflow with CONFIG_KASAN
cpumask: use nr_cpumask_bits for parsing functions
Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"
selinux: fix off-by-one in setprocattr
ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
Linux 4.4.48
base/memory, hotplug: fix a kernel oops in show_valid_zones()
x86/irq: Make irq activate operations symmetric
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
USB: serial: pl2303: add ATEN device ID
USB: serial: qcserial: add Dell DW5570 QDL
KVM: x86: do not save guest-unsupported XSAVE state
HID: wacom: Fix poor prox handling in 'wacom_pl_irq'
percpu-refcount: fix reference leak during percpu-atomic transition
mmc: sdhci: Ignore unexpected CARD_INT interrupts
can: bcm: fix hrtimer/tasklet termination in bcm op removal
mm, fs: check for fatal signals in do_generic_file_read()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
cifs: initialize file_info_lock
zswap: disable changing params if init fails
svcrpc: fix oops in absence of krb5 module
NFSD: Fix a null reference case in find_or_create_lock_stateid()
powerpc: Add missing error check to prom_find_boot_cpu()
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
ata: sata_mv:- Handle return value of devm_ioremap.
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
ext4: validate s_first_meta_bg at mount time
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
ANDROID: security: export security_path_chown()
Linux 4.4.47
net: dsa: Bring back device detaching in dsa_slave_suspend()
qmi_wwan/cdc_ether: add device ID for HP lt2523 (Novatel E371) WWAN card
af_unix: move unix_mknod() out of bindlock
r8152: don't execute runtime suspend if the tx is not empty
bridge: netlink: call br_changelink() during br_dev_newlink()
tcp: initialize max window for a new fastopen socket
ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock
net: phy: bcm63xx: Utilize correct config_intr function
net: fix harmonize_features() vs NETIF_F_HIGHDMA
ax25: Fix segfault after sock connection timeout
ravb: do not use zero-length alignment DMA descriptor
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
net: systemport: Decouple flow control from __bcm_sysport_tx_reclaim
net: ipv4: fix table id in getroute response
net: lwtunnel: Handle lwtunnel_fill_encap failure
mlxsw: pci: Fix EQE structure definition
mlxsw: switchx2: Fix memory leak at skb reallocation
mlxsw: spectrum: Fix memory leak at skb reallocation
r8152: fix the sw rx checksum is unavailable
ANDROID: sdcardfs: Switch strcasecmp for internal call
ANDROID: sdcardfs: switch to full_name_hash and qstr
ANDROID: sdcardfs: Add GID Derivation to sdcardfs
ANDROID: sdcardfs: Remove redundant operation
ANDROID: sdcardfs: add support for user permission isolation
ANDROID: sdcardfs: Refactor configfs interface
ANDROID: sdcardfs: Allow non-owners to touch
ANDROID: binder: fix format specifier for type binder_size_t
ANDROID: fs: Export vfs_rmdir2
ANDROID: fs: Export free_fs_struct and set_fs_pwd
ANDROID: mnt: remount should propagate to slaves of slaves
ANDROID: sdcardfs: Switch ->d_inode to d_inode()
ANDROID: sdcardfs: Fix locking issue with permision fix up
ANDROID: sdcardfs: Change magic value
ANDROID: sdcardfs: Use per mount permissions
ANDROID: sdcardfs: Add gid and mask to private mount data
ANDROID: sdcardfs: User new permission2 functions
ANDROID: vfs: Add setattr2 for filesystems with per mount permissions
ANDROID: vfs: Add permission2 for filesystems with per mount permissions
ANDROID: vfs: Allow filesystems to access their private mount data
ANDROID: mnt: Add filesystem private data to mount points
ANDROID: sdcardfs: Move directory unlock before touch
ANDROID: sdcardfs: fix external storage exporting incorrect uid
ANDROID: sdcardfs: Added top to sdcardfs_inode_info
ANDROID: sdcardfs: Switch package list to RCU
ANDROID: sdcardfs: Fix locking for permission fix up
ANDROID: sdcardfs: Check for other cases on path lookup
ANDROID: sdcardfs: override umask on mkdir and create
Linux 4.4.46
mm, memcg: do not retry precharge charges
platform/x86: intel_mid_powerbtn: Set IRQ_ONESHOT
pinctrl: broxton: Use correct PADCFGLOCK offset
s5k4ecgx: select CRC32 helper
IB/umem: Release pid in error and ODP flow
IB/ipoib: move back IB LL address into the hard header
drm/i915: Don't leak edid in intel_crt_detect_ddc()
SUNRPC: cleanup ida information when removing sunrpc module
NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
ARC: [arcompact] handle unaligned access delay slot corner case
ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list
can: ti_hecc: add missing prepare and unprepare of the clock
can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointer
s390/ptrace: Preserve previous registers for short regset write
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
ISDN: eicon: silence misleading array-bounds warning
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
mm/mempolicy.c: do not put mempolicy before using its nodemask
drm: Fix broken VT switch with video=1366x768 option
tile/ptrace: Preserve previous registers for short regset write
fbdev: color map copying bounds checking
Linux 4.4.45
arm64: avoid returning from bad_mode
selftest/powerpc: Wrong PMC initialized in pmc56_overflow test
dmaengine: pl330: Fix runtime PM support for terminated transfers
ite-cir: initialize use_demodulator before using it
blackfin: check devm_pinctrl_get() for errors
ARM: 8613/1: Fix the uaccess crash on PB11MPCore
ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation
ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields
arm64/ptrace: Avoid uninitialised struct padding in fpr_set()
arm64/ptrace: Preserve previous registers for short regset write - 3
arm64/ptrace: Preserve previous registers for short regset write - 2
arm64/ptrace: Preserve previous registers for short regset write
ARM: dts: da850-evm: fix read access to SPI flash
ceph: fix bad endianness handling in parse_reply_info_extra
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
svcrdma: avoid duplicate dma unmapping during error recovery
clocksource/exynos_mct: Clear interrupt when cpu is shut down
ubifs: Fix journal replay wrt. xattr nodes
qla2xxx: Fix crash due to null pointer access
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
mtd: nand: xway: disable module support
ieee802154: atusb: do not use the stack for buffers to make them DMA able
mmc: mxs-mmc: Fix additional cycles after transmission stop
HID: corsair: fix control-transfer error handling
HID: corsair: fix DMA buffers on stack
PCI: Enumerate switches below PCI-to-PCIe bridges
fuse: clear FR_PENDING flag when moving requests out of pending queue
svcrpc: don't leak contexts on PROC_DESTROY
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
tmpfs: clear S_ISGID when setting posix ACLs
ARM: dts: imx31: fix AVIC base address
ARM: dts: imx31: move CCM device node to AIPS2 bus devices
ARM: dts: imx31: fix clock control module interrupts description
perf scripting: Avoid leaking the scripting_context variable
IB/IPoIB: Remove can't use GFP_NOIO warning
IB/mlx4: When no DMFS for IPoIB, don't allow NET_IF QPs
IB/mlx4: Fix port query for 56Gb Ethernet links
IB/mlx4: Fix out-of-range array index in destroy qp flow
IB/mlx4: Set traffic class in AH
IB/mlx5: Wait for all async command completions to complete
ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it
Linux 4.4.44
pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE
powerpc/ibmebus: Fix device reference leaks in sysfs interface
powerpc/ibmebus: Fix further device reference leaks
bus: vexpress-config: fix device reference leak
blk-mq: Always schedule hctx->next_cpu
ACPI / APEI: Fix NMI notification handling
block: cfq_cpd_alloc() should use @gfp
cpufreq: powernv: Disable preemption while checking CPU throttling state
NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.
NFS: Fix a performance regression in readdir
pNFS: Fix race in pnfs_wait_on_layoutreturn
pinctrl: meson: fix gpio request disabling other modes
btrfs: fix error handling when run_delayed_extent_op fails
btrfs: fix locking when we put back a delayed ref that's too new
x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
USB: serial: ch341: fix modem-control and B0 handling
USB: serial: ch341: fix resume after reset
drm/radeon: drop verde dpm quirks
sysctl: Drop reference added by grab_header in proc_sys_readdir
sysrq: attach sysrq handler correctly for 32-bit kernel
tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
mnt: Protect the mountpoint hashtable with mount_lock
vme: Fix wrong pointer utilization in ca91cx42_slave_get
xhci: fix deadlock at host remove by running watchdog correctly
i2c: fix kernel memory disclosure in dev interface
i2c: print correct device invalid address
Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
USB: serial: ch341: fix open and resume after B0
USB: serial: ch341: fix control-message error handling
USB: serial: ch341: fix open error handling
USB: serial: ch341: fix initial modem-control state
USB: serial: kl5kusb105: fix line-state error handling
nl80211: fix sched scan netlink socket owner destruction
KVM: x86: Introduce segmented_write_std
KVM: x86: emulate FXSAVE and FXRSTOR
KVM: x86: add asm_safe wrapper
KVM: x86: add Align16 instruction flag
KVM: x86: flush pending lapic jump label updates on module unload
jump_labels: API for flushing deferred jump label updates
KVM: eventfd: fix NULL deref irqbypass consumer
KVM: x86: fix emulation of "MOV SS, null selector"
mm/hugetlb.c: fix reservation race when freeing surplus pages
ocfs2: fix crash caused by stale lvb with fsdlm plugin
mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
selftests: do not require bash for the generated test
selftests: do not require bash to run netsocktests testcase
Input: i8042 - add Pegatron touchpad to noloop table
Input: xpad - use correct product id for x360w controllers
DEBUG: sched/fair: Fix sched_load_avg_cpu events for task_groups
DEBUG: sched/fair: Fix missing sched_load_avg_cpu events
net: socket: don't set sk_uid to garbage value in ->setattr()
ANDROID: configs: CONFIG_ARM64_SW_TTBR0_PAN=y
UPSTREAM: arm64: Disable PAN on uaccess_enable()
UPSTREAM: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: xen: Enable user access before a privcmd hvc call
UPSTREAM: arm64: Handle faults caused by inadvertent user access with PAN enabled
BACKPORT: arm64: Disable TTBR0_EL1 during normal kernel execution
BACKPORT: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
BACKPORT: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
BACKPORT: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
UPSTREAM: arm64: alternative: add auto-nop infrastructure
UPSTREAM: arm64: barriers: introduce nops and __nops macros for NOP sequences
Revert "FROMLIST: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros"
Revert "FROMLIST: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro"
Revert "FROMLIST: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1"
Revert "FROMLIST: arm64: Disable TTBR0_EL1 during normal kernel execution"
Revert "FROMLIST: arm64: Handle faults caused by inadvertent user access with PAN enabled"
Revert "FROMLIST: arm64: xen: Enable user access before a privcmd hvc call"
Revert "FROMLIST: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN"
ANDROID: sched/walt: fix build failure if FAIR_GROUP_SCHED=n
Linux 4.4.43
mm/init: fix zone boundary creation
ALSA: usb-audio: Add a quirk for Plantronics BT600
spi: mvebu: fix baudrate calculation for armada variant
ARM: OMAP4+: Fix bad fallthrough for cpuidle
ARM: zynq: Reserve correct amount of non-DMA RAM
powerpc: Fix build warning on 32-bit PPC
ALSA: firewire-tascam: Fix to handle error from initialization of stream data
HID: hid-cypress: validate length of report
net: vrf: do not allow table id 0
net: ipv4: Fix multipath selection with vrf
gro: Disable frag0 optimization on IPv6 ext headers
gro: use min_t() in skb_gro_reset_offset()
gro: Enter slow-path if there is no tailroom
r8152: fix rx issue for runtime suspend
r8152: split rtl8152_suspend function
ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules
igmp: Make igmp group member RFC 3376 compliant
drop_monitor: consider inserted data in genlmsg_end
drop_monitor: add missing call to genlmsg_end
net/mlx5: Avoid shadowing numa_node
net/mlx5: Check FW limitations on log_max_qp before setting it
net: stmmac: Fix race between stmmac_drv_probe and stmmac_open
net, sched: fix soft lockup in tc_classify
ipv6: handle -EFAULT from skb_copy_bits
net: vrf: Drop conntrack data after pass through VRF device on Tx
ser_gigaset: return -ENOMEM on error instead of success
netvsc: reduce maximum GSO size
Linux 4.4.42
usb: gadget: composite: always set ep->mult to a sensible value
Revert "usb: gadget: composite: always set ep->mult to a sensible value"
tick/broadcast: Prevent NULL pointer dereference
drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values
cx23885-dvb: move initialization of a8293_pdata
net: vxge: avoid unused function warnings
net: ti: cpmac: Fix compiler warning due to type confusion
cred/userns: define current_user_ns() as a function
staging: comedi: dt282x: tidy up register bit defines
powerpc/pci/rpadlpar: Fix device reference leaks
md: MD_RECOVERY_NEEDED is set for mddev->recovery
crypto: arm64/aes-ce - fix for big endian
crypto: arm64/aes-xts-ce: fix for big endian
crypto: arm64/sha1-ce - fix for big endian
crypto: arm64/aes-neon - fix for big endian
crypto: arm64/aes-ccm-ce: fix for big endian
crypto: arm/aes-ce - fix for big endian
crypto: arm64/ghash-ce - fix for big endian
crypto: arm64/sha2-ce - fix for big endian
s390/crypto: unlock on error in prng_tdes_read()
mmc: mmc_test: Uninitialized return value
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
target/iscsi: Fix double free in lio_target_tiqn_addtpg()
scsi: mvsas: fix command_active typo
ASoC: samsung: i2s: Fixup last IRQ unsafe spin lock call
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
iommu/vt-d: Fix pasid table size encoding
iommu/amd: Fix the left value check of cmd buffer
iommu/amd: Missing error code in amd_iommu_init_device()
clk: imx31: fix rewritten input argument of mx31_clocks_init()
clk: clk-wm831x: fix a logic error
hwmon: (g762) Fix overflows and crash seen when writing limit attributes
hwmon: (nct7802) Fix overflows seen when writing into limit attributes
hwmon: (ds620) Fix overflows seen when writing temperature limits
hwmon: (amc6821) sign extension temperature
hwmon: (scpi) Fix module autoload
cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected
ath10k: use the right length of "background"
stable-fixup: hotplug: fix unused function warning
usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()
usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()
usb: dwc3: gadget: always unmap EP0 requests
staging: iio: ad7606: fix improper setting of oversampling pins
mei: bus: fix mei_cldev_enable KDoc
USB: serial: io_ti: bind to interface after fw download
USB: phy: am335x-control: fix device and of_node leaks
ARM: dts: r8a7794: Correct hsusb parent clock
USB: serial: kl5kusb105: abort on open exception path
ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: Fix trying to free already-free IRQ 4
usb: dwc3: pci: add Intel Gemini Lake PCI ID
xhci: Fix race related to abort operation
xhci: Use delayed_work instead of timer for command timeout
usb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL
USB: serial: mos7720: fix parallel probe
USB: serial: mos7720: fix parport use-after-free on probe errors
USB: serial: mos7720: fix use-after-free on probe errors
USB: serial: mos7720: fix NULL-deref at open
USB: serial: mos7840: fix NULL-deref at open
USB: serial: kobil_sct: fix NULL-deref in write
USB: serial: cyberjack: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: io_edgeport: fix NULL-deref at open
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: garmin_gps: fix memory leak on failed URB submit
USB: serial: iuu_phoenix: fix NULL-deref at open
USB: serial: io_ti: fix I/O after disconnect
USB: serial: io_ti: fix another NULL-deref at open
USB: serial: io_ti: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: keyspan_pda: verify endpoints at probe
USB: serial: pl2303: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: omninet: fix NULL-derefs at open and disconnect
usb: xhci: hold lock over xhci_abort_cmd_ring()
xhci: Handle command completion and timeout race
usb: host: xhci: Fix possible wild pointer when handling abort command
usb: xhci: fix return value of xhci_setup_device()
xhci: free xhci virtual devices with leaf nodes first
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Apollo Lake
xhci: workaround for hosts missing CAS bit
usb: xhci: fix possible wild pointer
usb: dwc3: core: avoid Overflow events
usb: gadget: composite: Test get_alt() presence instead of set_alt()
USB: dummy-hcd: fix bug in stop_activity (handle ep0)
USB: fix problems with duplicate endpoint addresses
USB: gadgetfs: fix checks of wTotalLength in config descriptors
USB: gadgetfs: fix use-after-free bug
USB: gadgetfs: fix unbounded memory allocation bug
usb: gadgetfs: restrict upper bound on device configuration size
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
KVM: MIPS: Flush KVM entry code from icache globally
KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
mac80211: initialize fast-xmit 'info' later
ARM: davinci: da850: don't add emac clock to lookup table twice
ALSA: usb-audio: Fix irq/process data synchronization
ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
ALSA: hda - Fix up GPIO for ASUS ROG Ranger
Linux 4.4.41
net: mvpp2: fix dma unmapping of TX buffers for fragments
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
kconfig/nconf: Fix hang when editing symbol with a long prompt
target/user: Fix use-after-free of tcmu_cmds if they are expired
powerpc: Convert cmp to cmpd in idle enter sequence
powerpc/ps3: Fix system hang with GCC 5 builds
nfs_write_end(): fix handling of short copies
libceph: verify authorize reply on connect
PCI: Check for PME in targeted sleep state
Input: drv260x - fix input device's parent assignment
media: solo6x10: fix lockup by avoiding delayed register write
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
fgraph: Handle a case where a tracer ignores set_graph_notrace
platform/x86: asus-nb-wmi.c: Add X45U quirk
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
KVM: PPC: Book3S HV: Don't lose hardware R/C bit updates in H_PROTECT
KVM: PPC: Book3S HV: Save/restore XER in checkpointed register state
md/raid5: limit request size according to implementation limits
sc16is7xx: Drop bogus use of IRQF_ONESHOT
s390/vmlogrdr: fix IUCV buffer allocation
firmware: fix usermode helper fallback loading
ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache
scsi: avoid a permanent stop of the scsi device's request queue
scsi: zfcp: fix rport unblock race with LUN recovery
scsi: zfcp: do not trace pure benign residual HBA responses at default level
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
scsi: megaraid_sas: Do not set MPI2_TYPE_CUDA for JBOD FP path for FW which does not support JBOD sequence map
scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset
vt: fix Scroll Lock LED trigger name
block: protect iterate_bdevs() against concurrent close
mei: request async autosuspend at the end of enumeration
drivers/gpu/drm/ast: Fix infinite loop if read fails
drm/gma500: Add compat ioctl
drm/radeon: add additional pci revision to dpm workaround
drm/radeon: Hide the HW cursor while it's out of bounds
drm/radeon: Also call cursor_move_locked when the cursor size changes
drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
drm/nouveau/fifo/gf100-: protect channel preempt with subdev mutex
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/bios: require checksum to match for fast acpi shadow method
drm/nouveau/kms: lvds panel strap moved again on maxwell
ACPI / video: Add force_native quirk for HP Pavilion dv6
ACPI / video: Add force_native quirk for Dell XPS 17 L702X
staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data
staging: comedi: ni_mio_common: fix M Series ni_ai_insn_read() data mask
thermal: hwmon: Properly report critical temperature in sysfs
clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
regulator: stw481x-vmmc: fix ages old enable error
mmc: sdhci: Fix recovery from tuning timeout
ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.
cfg80211/mac80211: fix BSS leaks when abandoning assoc attempts
rtlwifi: Fix enter/exit power_save
ssb: Fix error routine when fallback SPROM fails
Linux 4.4.40
ppp: defer netns reference release for ppp channel
driver core: fix race between creating/querying glue dir and its cleanup
xfs: set AGI buffer type in xlog_recover_clear_agi_bucket
arm/xen: Use alloc_percpu rather than __alloc_percpu
xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
tpm xen: Remove bogus tpm_chip_unregister
kernel/debug/debug_core.c: more properly delay for secondary CPUs
kernel/watchdog: use nmi registers snapshot in hardlockup handler
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Fix a possible memory corruption during reconnect
ASoC: intel: Fix crash at suspend/resume without card registration
dm space map metadata: fix 'struct sm_metadata' leak on failed create
dm crypt: mark key as invalid until properly loaded
dm flakey: return -EINVAL on interval bounds error in flakey_ctr()
blk-mq: Do not invoke .queue_rq() for a stopped queue
usb: gadget: composite: always set ep->mult to a sensible value
exec: Ensure mm->user_ns contains the execed files
fs: exec: apply CLOEXEC before changing dumpable task flags
mm/vmscan.c: set correct defer count for shrinker
loop: return proper error from loop_queue_rq()
f2fs: set ->owner for debugfs status file's file_operations
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: add sanity checking to count_overhead()
ext4: fix in-superblock mount options processing
ext4: use more strict checks for inodes_per_block on mount
ext4: fix stack memory corruption with 64k block size
ext4: fix mballoc breakage with 64k block size
crypto: caam - fix AEAD givenc descriptors
ptrace: Capture the ptracer's creds not PT_PTRACE_CAP
mm: Add a user_ns owner to mm_struct and fix ptrace permission checks
block_dev: don't test bdev->bd_contains when it is not stable
btrfs: make file clone aware of fatal signals
Btrfs: don't BUG() during drop snapshot
Btrfs: fix memory leak in do_walk_down
Btrfs: don't leak reloc root nodes on error
Btrfs: return gracefully from balance if fs tree is corrupted
Btrfs: bail out if block group has different mixed flag
Btrfs: fix memory leak in reading btree blocks
clk: ti: omap36xx: Work around sprz319 advisory 2.1
ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
ALSA: hda - fix headset-mic problem on a Dell laptop
ALSA: hda - ignore the assoc and seq when comparing pin configurations
ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016
ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
USB: UHCI: report non-PME wakeup signalling for Intel hardware
usb: gadget: composite: correctly initialize ep->maxpacket
usb: gadget: f_uac2: fix error handling at afunc_bind
usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices
USB: cdc-acm: add device id for GW Instek AFG-125
USB: serial: kl5kusb105: fix open error path
USB: serial: option: add dlink dwm-158
USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
Btrfs: fix qgroup rescan worker initialization
btrfs: store and load values of stripes_min/stripes_max in balance status item
Btrfs: fix tree search logic when replaying directory entry deletes
btrfs: limit async_work allocation and worker func duration
ANDROID: trace: net: use %pK for kernel pointers
ANDROID: android-base: Enable QUOTA related configs
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
net: inet: Support UID-based routing in IP protocols.
Revert "net: ipv6: fix virtual tunneling build"
net: core: add UID to flows, rules, and routes
net: core: Add a UID field to struct sock.
Revert "net: core: Support UID-based routing."
Revert "net: core: Handle 'sk' being NULL in UID-based routing"
Revert "ANDROID: net: fix 'const' warnings"
Revert "ANDROID: net: fib: remove duplicate assignment"
Revert "ANDROID: net: core: fix UID-based routing"
UPSTREAM: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
UPSTREAM: arm64: enable CONFIG_DEBUG_RODATA by default
goldfish: enable CONFIG_INET_DIAG_DESTROY
sched/walt: kill {min,max}_capacity
sched: fix wrong truncation of walt_avg
ANDROID: dm verity: add minimum prefetch size
Linux 4.4.39
crypto: rsa - Add Makefile dependencies to fix parallel builds
hotplug: Make register and unregister notifier API symmetric
batman-adv: Check for alloc errors when preparing TT local data
m68k: Fix ndelay() macro
arm64: futex.h: Add missing PAN toggling
can: peak: fix bad memory access and free sequence
can: raw: raw_setsockopt: limit number of can_filter that can be set
crypto: mcryptd - Check mcryptd algorithm compatibility
perf/x86: Fix full width counter, counter overflow
locking/rtmutex: Use READ_ONCE() in rt_mutex_owner()
locking/rtmutex: Prevent dequeue vs. unlock race
zram: restrict add/remove attributes to root only
parisc: Fix TLB related boot crash on SMP machines
parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and flush_icache_page_asm
parisc: Purge TLB before setting PTE
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
Conflicts:
arch/arm64/kernel/traps.c
drivers/usb/dwc3/core.h
drivers/usb/dwc3/ep0.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-ring.c
drivers/usb/host/xhci.c
drivers/video/fbdev/core/fbcmap.c
include/trace/events/sched.h
mm/vmscan.c
Change-Id: I3faa0010ecb98972cd8e6470377a493b56d95f89
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Return EINVAL if cmd is not v4l2 PRIVATE_IOCTL_CMD.
Change-Id: Iaffa0f2062ea9832dfbaf58a5477185721ff0046
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Add support for 192k/96k sampling rates for HPH RX
on SDM660 internal codec.
Change-Id: I364cdfc1b3e086158b6d115b7e4c4ddaf5c132b1
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Recommendation is to use NOMINAL in stead of TURBO
clock as threshold for voting with CX iPeak.
Change-Id: Idcdc9ee86118a34a031b80dc86f7cc6dad71a05f
Signed-off-by: Srikanth Uyyala <suyyala@codeaurora.org>
WLAN firmware responds with number of memory regions and starting
address of each as part of MSA info response. These memory
regions needs to be assigned with different hypervisor permission
based on secure_flag. Current code assumes that there will always
be 2 regions passed by WLAN FW but WLAN FW may pass only one
region to be mapped. Map the memory region based on number of
memory region passed by WLAN FW.
Change-Id: Ib62570a0851adb858b0f11959265ea9c0b42429e
CRs-fixed: 2021566
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
int_count variable datatype is uint64 in tz version 2.X/3.0, and
is changed to uint32 in tz version >=4.X, so updating int_count
according to the TZ version.
Change-Id: I72e128e6ad41711fd49416faf6aebfc869187ee2
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Endpoint command to request resources on ep0 is take upto ~800us and
this delay is observed for every new/re enumeration. As the api polls
(reads the register and it happens over cnoc) for every 1us to check
for completion it could result in congestion on cnoc. Hence increase
polling interval from 1us to 20us for this endpoint command.
Change-Id: I6d738b46a47b00105289e8f07b8fe0883a3fda44
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
mhi clients can manage both hardware and software event rings.
Process incoming data based on event ring type instead of
channel type.
CRs-Fixed: 2018326
Change-Id: Ifa2de76034224c19a846f7be153400888f8c66de
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
When a client ask MHI host to processed X number of events, only count
transfer events as part of processed events. All other events are internal
events.
CRs-Fixed: 2018324
Change-Id: I4cfcae0ba187348442c3fc45b76d7c4b01f687bd
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Since the PTE shareability values can be multibit fix so that they
are properly checked.
Change-Id: I36791921b0189b50cbbcb79efdb2f1a36ad9d726
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Fix the symbol linking error for loadable kernel modules
which is using secure buffer hypervisor api for smmu configuration.
CRs-Fixed: 2019262
Change-Id: I3d83fd4b1854298c1283e03f220de8c673195492
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
gsi_reg.h file includes the definitions of GSI registers.
The GSI Instruction RAM registers are defined twice.
This change removes the duplication.
Change-Id: Iccd256711c28a5f4698555079a7f73ce0357a92d
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Increase the common CMA region size to 44MB to accommodate modem diag
buffer region.
Change-Id: Iad83f749d8ca5635ead9c637dbc2f927191414fe
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
For sdm660 the ULPS clamp registers are moved from
DSI PHY level to interface level. This change handles
the new settings for both video mode and command mode
interface.
Change-Id: Ib99c605362aa25aacfa394c1a7ffe2886acf7035
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
If both irq chip and external interrupt controller implement
irq_disable callback then disable_irq() API disables an interrupt
at external interrupt controller level but does not disable at GIC
level due to lazy approach. During the cpu hotplug gic_set_affinity()
checks whether IRQ enabled at GIC level or not and enabling IRQ at
external interrupt controller level too after IRQ migration to new cpu
even though IRQ was disabled. So add a check in gic_set_affinity()
to check whether IRQ was disabled in descriptor before enabling.
Change-Id: Iba81881c08102ac0a5960c3a97c1c9f8c477bd56
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
As per the hardware documentation, update the regulator
configuration for apc0, apc1, gfx CPR regulators to support new
speed bins in msm8996pro.
CRs-Fixed: 1083423
Change-Id: I97b9b98305e3478012664b636df26299eca66f26
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Add a VDD_APCC CPR boost corner of 1996.8 MHz for the power
cluster on MSM8996-Pro speed bin 1 parts.
Change-Id: I9bf29cdba47918770dbef5cd1f2631afccf26221
CRs-Fixed: 1010722
Signed-off-by: David Collins <collinsd@codeaurora.org>
Change the MinSVS fuse corner to virtual corner mapping for the
power cluster and performance cluster on MSM8996-Pro chips with
CPR fuse revision 2 or greater.
Change the mapping according to the following:
Power cluster: 1 (307.2 MHz) --> 3 (460.8 MHz)
Perf cluster: 1 (307.2 MHz) --> 4 (537.6 MHz)
Change-Id: I6b6ee6225d43605ad0f5ae1e16061acf12b49927
CRs-Fixed: 1004373
Signed-off-by: David Collins <collinsd@codeaurora.org>
Update the VDD_GFX CPR open-loop and closed-loop voltage
adjustments for MSM8996-Pro chips based upon characterization
results. This ensures stability and minimum power consumption.
Change-Id: I89b79f92bcb4cc54a050f8b0ba17f76ff471838f
CRs-Fixed: 989555
Signed-off-by: David Collins <collinsd@codeaurora.org>
Set the CPR IRQ affinity of the VDD_APCC CPR3 controller to be
both cores of the APPS power cluster (i.e. CPU0 and CPU1). This
ensures that neither of the CPU cores of the performance cluster
will be woken up to service a VDD_APCC CPR IRQ which was
generated when the last performance cluster core power collapsed.
Change-Id: I055e50ffcb85622ddd67d55b44d77c342e9ec074
CRs-Fixed: 949650
Signed-off-by: David Collins <collinsd@codeaurora.org>
core_ctl module no longer hotplug the CPUs. Hence remove the
/sys/devices/system/cpu/cpuX/core_ctl/cpus file interface which
pints the online/offline state of all CPUs in the cluster.
The global_state file interface can still be used to know all
the state information about all CPUs. Replace "Active" with
"Isolated" string in this file output. Otherwise we see that
an offline CPU as active.
Change-Id: Id6ffb1c3ddfe85cf34ab670ceea8b53e5b2f60e2
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
We use pr_* to print info/warn/error messages. Use pr_fmt so
that the messages are prefixed by "core_ctl:" string.
Change-Id: Icc84db30ebf0855599431366d090a2b1c94da6d0
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
The online state is cached in CPU hotplug callbacks. This is
used in determining the potential candidates for isolation or
unisolation. The current code has checks in hotplug notifier
callback to correct the online state if it is out of sync
with the actualy CPU state. All this maintenance can be
avoided by directly using cpu_online().
This patch fixes an incorrect warning message emitted from
CPU_UP_CANCELED event callback.
Change-Id: I9681ce6c5bc701507427d60db397ca4966fbdb58
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Hardware characterization has shown that the CPU LDOs can
operate safely with less than 150 mV of headroom voltage.
Reduce the CPU LDO minimum allowed headroom voltage for both the
power cluster and the performance cluster in order to save power
by allowing LDO usage in more situations.
Change-Id: I72f28569d4719540fc84cf65d8783bbfec9435ad
CRs-Fixed: 989555
Signed-off-by: David Collins <collinsd@codeaurora.org>
Update the VDD_APCC CPR open-loop and closed-loop voltage
adjustments for MSM8996-Pro based upon characterization results.
This ensures stability and minimum power consumption. Reuse the
CPR revision 1 adjustment values for future CPR revisions (2 - 7)
for forward compatibility.
Change-Id: I42f7b696987102a38db324a1c515f1c6f01e6d45
CRs-Fixed: 989555
Signed-off-by: David Collins <collinsd@codeaurora.org>
As per msm8953 design, APM state machine could take more
than 200us for mode switching. Increase SW timeout constraint
value to 500us.
Also, update the mask used to check APM switch status.
CRs-Fixed: 992695
Change-Id: Ie0f8733fb5b39172fb14547292cbd05689a50230
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
The commit 639277b6c73c ("regulator: spm-regulator: Add additional
settling delay for FTS2.5 SMPS") incorrectly changed the usage
of 'uV' variable. The local 'uV' variable holds the correct voltage
level to be scaled up/down. Use it instead of vreg->uV.
CRs-Fixed: 1036738
Change-Id: I52540237a4db79c149409c6017ffc750b5abddd2
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Based on characterization add 70us settling delay on the voltage UP
to account for warm-up time and ramp-up delays for 0-10% and 90-100%
of the voltage value.
On the voltage ramp-down side add the stepper slew-rate delay and
and an additional 70us margin to avoid voltage updates while the
stepper is in progress. This could lead to voltage over/undershoot
due to buck-internal synchronization failure.
CRs-Fixed: 1036738
Change-Id: Id4230be9c4c981758bbf6860bab1f487a3b57f85
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
To accommodate speed bin 2 and fuse revisions associated with it
increase the fuse combo count from 16 to 24. At present, this is
needed for msm8996proAU SOC.
Change-Id: I8555162eab2c6bfead2e0762f28525e0aa56cf10
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
To accommodate speed bin 2 and fuse revisions associated with it
increase the fuse combo count from 16 to 24. At present, this is
needed for msm8996proAU SOC.
Change-Id: Ie781ffda433d491a38695caa5e55ec1ec7ff9b4a
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Temp_adj_en instantaneously reduces the voltage and quotient
when temperature enters into corresponding band which may cause
an aggressive reduction in voltage. Avoid this by not configuring
temp_adj_en bit, this only reduces the quotient and allows CPR to
react to the reduced quotient. Use temp_adj_en bit only when both
temperature based and core count based adjustments are desired.
CRs-Fixed: 1051076
Change-Id: Ia42dbdd095e51bf9b9b7e865c104dcbe8f4219da
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Use scaled gate count (GCNT) for aging measurements to reduce
the noise effect on aging data. The amount of scaling depends
on the noise effect observed in characterization results. Use
a selected scaling factor value to derive the gate count (GCNT)
used for aging measurements.
CRs-Fixed: 1025832
Change-Id: I0eb3fb08d51ddca5cd4c08e26bc83eb9f66fd3ed
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Fix the kw issues in jpeg set driver data and in jpegdma modules.
CRs-Fixed: 2017767
Change-Id: I601245553b8148c9f257d55c42367b0b8612db92
Signed-off-by: Krupal Divvela <kdivvela@codeaurora.org>
Check the validity of pointer before dereference and initialize
uninitialized variables.
Change-Id: Ifad4dd9668db91a18b493e0c7276bf6c193fb680
Signed-off-by: Venu Yeshala <vyeshala@codeaurora.org>
video frame event notification is changed so that events will be raised
for all frames both predicted and non predicted frames and invalidate
pts and dts values for predicted frames. This change is specific to
IoT targets in which only non predicted frames will be decoded
and rendered for performance improvement.
CR's-Fixed: 2005724
Change-Id: I08f648a89eb043938fcc7d3d81e83c3599a2f160
Signed-off-by: Udaya Bhaskara Reddy Mallavarapu <udaym@codeaurora.org>
pwm_free() is called in the driver incorrectly when trying to disable PWM
channel while changing the configuration. pwm_free() checks PWMF_REQUESTED
flag before calling disable() hook. The driver doesn't call pwm_request()
but only calls of_pwm_get() at the probe to get the flag once. The Flag
will be cleared when pwm_free() is called for the first time and calling it
afterwards will simply bailout not calling disable().
Replace pwm_free() with pwm_disable(), this won't cause any issue because
the PWM channel is considered statically allocated to the led devices from
hardware perspective and no need to free it in the driver.
While at it, free the PWM device if any errors when getting PWM
configuration.
CRs-Fixed: 2014600
Change-Id: I373d2a1ac83232ce94933c287b4ebe3f23519c83
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Fix the order of parameters passed into read/write APIs to make
it more readable. While at it, add a pr_fmt() to the driver to
get better log information. Also, change all dev_* APIs to pr_*
APIs for better logging.
Change-Id: Ib19f48ddbaeeb3af483ac472dabb44558a6b9e43
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently MISC_TRIM_ERROR_RC19P2_CLK register is hardcoded to
read the trim error in 19.2 MHz RC clock. However, this can be
located differently in some PMICs. Add support to read it from
misc device as this register cannot be directly accessed from
haptics driver.
Specify the MISC peripheral and the clock trim error register in
haptics for pmi8998 and pm660 so that haptics initial drive code
can be adjusted based on error code properly.
Change-Id: I04d8dbac0f943c65272531647c54d3c1495331e7
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
clock_debug_mux is required for the 'measure' functionality of the clock,
register using the clk_register_debug for the same.
Change-Id: I95b64ddd3ef3d869cf3b8ad2b4210ea78ba8f5fa
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Common Clock Framework(CCF) already has a clock ops hook `debug_init` which
could be used for the debugfs clock measure functionality. Remove the APIs
from the CCF and update the 'debug_init' clock ops to the clock types which
require the measure functionality.
Change-Id: I0c01f72a9d1d1caa1b1ab73a800401c2cbc3216c
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The 'measure' functionality is a debug feature which allows the user of
clocks to allow measuring the frequency of a given clock using the ring
oscillator.
Move 'measure' code to a new clk-debug file to support the functionality.
Change-Id: I229721f17d232a4ff69b5cf416b43d22fee5b72e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
