If the user-space client doesn't provide the pixel extension and qseed3
configuration, driver should set the default values. Change sets the
default values if user-space client is not configuring the blocks when
VIG pipes are selected.
CRs-Fixed:2002381
Change-Id: I02f0e76fb87587d2eed9e5f4fcca5baa7d605b92
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Manoj Kumar AVM <manojavm@codeaurora.org>
Fastmap feature is used in the cases where it required reduced time for
dma_map/unmap().
Change-Id: Ic1c1fd0bbd95d849eaf6ee13569e345117a988b6
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Currently the interrupt trigger type is configured as NONE. This
causes a level handler to be assigned to these interrupts.
However, all of them are edge triggered interrupts with varying
falling/rising/both edge flavors. Update the device tree to
use their correct trigger types thereby preventing missed interrupt
storms because of incorrect handler types.
Change-Id: I6b5cddc8281ca7f6810dcb754d7dd2e6ae6f339c
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Prevent concurrent usage & re-allocation of the wr_buf variable.
Based off patch by chengengjia <chengjia4574@gmail.com>.
BUG: 33001936
Change-Id: I88d78e1ec0fc9e88b1e6824c06161b67d01136ec
Signed-off-by: Andrew Chant <achant@google.com>
Git-commit: d740e7228bd1578ed01762998b2a86e7df56e608
Git-repo: https://android.googlesource.com/kernel/msm
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Add support to configure battery thermal coefficients so that different
battery thermistors can be supported. These coefficients can be
configured via "qcom,battery-thermal-coefficients" device tree property.
CRs-Fixed: 2004461
Change-Id: Iff25acd397a68c31057dff4db1896d46e396adc6
Signed-off-by: Yingwei Zhao <cyizhao@codeaurora.org>
Add null check in firmware_direct_write to avoid null
pointer dereference due to firmware_abort.
Change-Id: Ibde30452bb6f3fe7a9f92aa3b1f2ed85a858d94e
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
SSR logic is executed during device shutdown. During device
shutdown the Linux tasks (processes) are moving to SIGKILL
state. If a DMA allocation from the kernel happens
in a context of a process in SIGKILL state and page migration
is needed, the allocation will fail.
Use GFP_ATOMIC allocation flag during SSR. This will
utilize the atomic memory pool and will not require page
migration.
CRs-fixed: 1077811
Change-Id: Ie06b85d1f9d0a230c3d3832b6f0bbcdefc520c1e
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Add support for 352800 sampling rates and 32 bps for the TDM.
Add support for PCM compress passthough mode with mixer controls.
CRs-fixed: 1116515
Change-Id: Iab059a5a6b6ce8f57717023467677a399a60032e
Signed-off-by: Josh Kirsch <jkirsch@codeaurora.org>
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
This module adds support for the Integrated WCN3990 WLAN
module, The ATH10k WCN3990 has integrated 802.11ac chipset
with SNOC bus interface.
The ATH10K is MAC80211 based driver, enable MAC80211 and
ATH10K core related kernel config flag for driver compilation.
CRs-Fixed: 2005603
Change-Id: Ie153688eabf29e8f33aee413750028147a94d9a2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Following list of changes have been made
1. Add the missing clocks in multimedia clock controller driver.
Also clean up clock flags and parent info for few clocks.
2. Removing clocks which are not controlled by HLOS.
3. MMCC needs to vote for volatge level on rail for the clock
frequencies, so add voltage voting in MMCC.
4. Initial rate configuration for MMPLLs.
Change-Id: If3d84e52783651b611b624dbc60b18993c0f0b1a
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Afe driver changes to query avtimer vs device drift.
Drift obtained can be used to pull the device pll so
that avtimer and device are in sync.
CRs-Fixed: 1112258
Change-Id: I4d4ddb0dbc06270553d583f266a44ddbe9412d1a
Signed-off-by: Manish Dewangan <manish@codeaurora.org>
io-pgtable-fast was implemented to achieve
better performance for IOMMU map/un-map. Add
DMA API support that goes through io-pgtable-fast
for 32 bit targets.
Change-Id:I3d0560a4331f6b7b87c70d0885df11d12cb1d6ec
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Add initial version of SDM630 GPU properties.
This is needed to support Graphics driver functionality
on SDM630 target.
Change-Id: I0442ed8dbb728adae36db8631eeba83c6425ea82
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Add ufs and ufs-phy device nodes to support
ufs as storage device for SDM630 QRD platform.
CRs-Fixed: 2005015
Change-Id: If0c4edaba9285ba9a1c927e1e804427160947b11
Signed-off-by: xiaonian <xiaonian@codeaurora.org>
Set the device node associated with the session while creating
the context to allow for dma operations.
Change-Id: I7937a7bd533a9be09453144e20f7ecca3f3cc0ef
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Slope limit coefficient is used to define the maximum change in
battery SOC. There is a requirement to configure slope limit
coefficient based on charging status and battery temperature
threshold. Add support for it through the following properties.
- qcom,slope-limit-temp-threshold
- qcom,slope-limit-coeffs
Possibe values allowed for slope limit coefficient is 0 to 31.
Change-Id: I41eacb13734f1692a16c1b011c58a488e46515ec
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Ensure that a few of the parameters (SELECTED_PDO, REQUESTED_PDO,
RDO) are properly cleared out during hard reset and a uevent
update is sent to notify userspace clients.
Also, don't reset src_cap_id upon disconnect. This makes it a
a monotonically increasing value upon every connection so that
clients can distinguish when a new PD session is established.
Demote it to a u16 in order to have a smaller wraparound (65535).
Change-Id: I622ad1155b3680d3f616d5e9a835d4c6cbca3636
Signed-off-by: Jack Pham <jackp@codeaurora.org>
When sending a request through the 'select_pdo' sysfs file,
make sure the request has gone through and is acknowledged
by the source before returning. This allows for checking if
the request was rejected so that an error can be returned.
Rename the 'swap_complete' completion variable to 'is_ready'
so it can be reused in this context. Also add a mutex so that
select_pdo will not contend with a dual_role swap.
Change-Id: Ie8b088faa15c67915e3bd96972b4f59f0cc66afe
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Currently when 3 switcher_power_ok interrupts are seen within a
second, the driver thinks that the switcher is reverse boosting
and suspends USB input path.
However, switcher_power_ok could happen 3 times within a second
while AICL is run from a charger collapse, a valid usecase which
ends up in an USB suspended state.
Note that AICL run caused switcher_power_ok is accompanied by an
USBIN_UV interrupt. Use that to distinguish reverse boost Vs AICL
runs. In particular, reset the switcher_power_ok interrupt count
updated by storm_watch when an USBIN_UV interrupt is seen.
Change-Id: I6817c66319f9af03ac28324a8d863876fdadafb3
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Since the interrupt information for both smb2 and smb138x charger
devices are almost common, abstract it to a single smb_irq_info
struct. Also, keep an interrupt index for every interrupt which
can be used when necessary.
Change-Id: I4e42dd15a46b59c1a9c27412ca6fdff281fa71ec
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
There are some circumstances where we have to reset the storm
watch interrupt count. Add support for it.
Change-Id: Iacbeb3258d53010aab8ba881d10de773fe54dd93
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
