This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the default iobase address (0x240) that is used when the user
does not pass a base address during the "comedi_config". Comedi
legacy drivers should only attach to a specified address.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the default iobase address (0x300) that is used when the user
does not pass a base address during the "comedi_config". Comedi
legacy drivers should only attach to a specified address.
Remove the dev_err() message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
This driver does a second request_region() for the additional I/O space
used on the 'ao' type boards. Modify the error message if that request
fails so it matches to format of the comedi_request_region() message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
This driver does a second request_region() for the I/O space needed
by the 8255 chip. Modify the error message if that request fails so
it matches to format of the comedi_request_region() message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver. Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
This driver does a second request_region() for the I/O space needed
by the 8255 chip. Modify the error message if that request fails so
it matches to format of the comedi_request_region() message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to handle the request_region() for legacy
comedi drivers.
As pointed out by Ian Abbott, legacy devices are configured manually
with the "comedi_config" program. The error messages are useful
diagnostics when trying to attach to these boards.
Providing a helper function allows consolidating the error messages
in the drivers and providing a consistent format for the errors.
This helper also sets the dev->iobase automatically for the driver
if the request_region() is successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().
Fixes regression introduced by commit
0e8f2fdacf (gpio: pca953x: use simple
irqdomain)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch modifies the IOCTL macros to use user-exportable data types,
as they are the referred kernel types for the user/kernel interface.
The patch does not change in any way the functionality of the binder driver.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Kirkwood
- a couple of small fixes for the Iomega ix2-200 board (ether and led)
- mvebu
- allow GPIO button to work on Mirabox when running SMP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRZZxwAAoJEAi3KVZQDZAerwcIAKR1xRKuagtXvfij+xfVVRQ6
1G645hTIthFXmNiEeo3Y/mswHhVooZvu8SWh3o3J2Wsbnzeh+ch6jTsl+g6Tnb3E
KmRFU0mcalRmsyYsh4PH9nDi8/oWyP+i3ZytgfcMlsSPNiE+Ek35NdTTWMLCTT8V
MkGysVc8MWoOmMf47mNboy5UUUTXRdnSUJSjv1ubrsTK33LT7Ii9Ce+eoNvpvF+5
+6RenfRMzRSwkZf9AaCRPAhXISQKbMAwz6lKGo2GGAW+73Z+JclXXmiCfQ8pWie2
pfyqiEYigZFqe6Ly5BUtGoVfDjmOLDs+ATTUDOlOj0uaEc7pOwwKoAtpVRdck24=
=yK1f
-----END PGP SIGNATURE-----
Merge tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper <jason@lakedaemon.net>:
mvebu fixes for v3.9 round 3
- Kirkwood
- a couple of small fixes for the Iomega ix2-200 board (ether and led)
- mvebu
- allow GPIO button to work on Mirabox when running SMP
* tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.
This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
