Changes to support packed 24 bit (SNDRV_PCM_FORMAT_S24_3LE)
CRs-Fixed: 1011048
Change-Id: Id927e9b8894b1bf99e57cc0f04abf126740c6d36
Signed-off-by: Manish Dewangan <manish@codeaurora.org>
Add touch to wake feature in ITE tech touchscreen driver.
The touchscreen interrupt is configured as wakeable interrupt,
so TS can be used to wake the device from suspend state.
Change-Id: I8da53ab4f03237b8652cd5891eadbffa752d72d3
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Add debugfs support for suspend and resume test for ITE
tech touchscreen driver.
Change-Id: I5a3d55c7c8e4b8f594fd7924c61ac1e5b5ad1965
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Add support for flash nodes for front and rear
camera.
CRs-Fixed: 1021009
Change-Id: I52537562214d439e9652bb6ba90f0d29e5b24fda
Signed-off-by: Viswanadha Raju Thotakura <viswanad@codeaurora.org>
Channel ids are not updated correctly in hardware params
fixup resulting in audio mute on one of the channels on headphones.
Fix the channel ids properly in msmcobalt machine driver hardware
params fixup.
CRs-Fixed: 1034829
Change-Id: If23da9ac1d2f71ad4d39371b665311f1f84b016a
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
The resp_len and resp_buf_ptr of qseecom_send_modfd_listener_resp
are not checked, then an userspace application that manipulates
resp_len can corrupt the kernel memory. Thus make changes to
validate these parameters.
CRs-fixed: 1036418
Change-Id: Id43ec6b55b332d0dac09a9abb998a410f49b44f7
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
It is required to update VBUS status to USB controller using qscratch
registers HS_PHY_CTRL and SS_PHY_CTRL interfacing high-speed and
super-speed PHYs. This change perfoms same from USB controller's glue
driver on starting and stopping peripheral mode based on supported
USB speed with USB gadget.
It also updates devicetree documentation explicitly mentioning required
register sets.
CRs-Fixed: 1046503
Change-Id: I92df87c0e2ff54dd7ee513d277cc075eab561019
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
This change removes updating VBUS status from QUSB PHY driver using
QSCRATCH register. New change would be adding same functionality from
USB controller driver.
- It also updates devicetree documentation and existing supported
MSM platforms' USB device node property to accommodate above changes.
CRs-Fixed: 1046503
Change-Id: I4573a077bb455ebe3750ab76a91d2593d7e94ea5
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Add device tree properties to enable detection of VPH droop,
short circuit and open circuit faults for flash LED on pmicobalt.
CRs-Fixed: 1024187
Change-Id: I13cf07b36f7bb890a71bedb9998a937e2c60ecb0
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Add support to receive and process the led_fault_irq to
detect short_circuit and open_circuit faults. Also, add
support to read all led_status registers in the irq handler.
CRs-Fixed: 1024187
Change-Id: I6941660484ea8b27377c668d1e7d815d52e83d83
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Add support for configuring the following features available
in flash LED:
1. VPH droop detection
2. Short circuit fault detection
3. Open circuit fault detection
CRs-Fixed: 1024187
Change-Id: I982e51ba62f0a75d1dcd3ef30e5d1249c970ffde
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Add the flash_prepare API to the leds-qpnp-flash driver to
maintain consistent usage of the API by the camera flash driver
across targets.
CRs-Fixed: 1043718
Change-Id: I21cc4b4556b2a4a1a918bfeb1d55ae164d4b5568
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Update the flash prepare API to accept a led_trigger device as an
argument. Also split the leds-qpnp-flash-v2 header file to keep the
flash_prepare API in a common header file for both legacy and v2
flash drivers.
CRs-Fixed: 1043718
Change-Id: Idb4ab086740b680e101d76d882bcfb618ac4b936
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Ascent and Itech batteries might be used with msmcobalt MTP. Add
the battery profiles to support that.
Change-Id: Icfed6881763df35a7f948f171856903de7e07a2a
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Batterydata for itech 3000mah and ascent 3450mah batteries are
newly created to be used with GEN3 FG on pmicobalt. Add them.
Change-Id: I0fe51b607d44920784cc0bb8bfd442e81f3c5d3d
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
