These names only make sense because of backwards compatability with
the order used by the crtc helper library. There's not really any real
requirement in the ordering here.
So rename them to something more descriptive and update the kerneldoc
a bit. Motivated in a discussion with Laurent about how to restore
plane state for dpms for drivers with runtime pm.
v2: Squash in fixup from Stephen Rothwell to fix a conflict with
tegra.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Work was getting left behind in LRC contexts during reset. This causes a hang
if the GPU is reset when HEAD==TAIL because the context's ringbuffer head and
tail don't get reset and retiring a request doesn't alter them, so the ring
still appears full.
Added a function intel_lr_context_reset() to reset head and tail on a LRC and
its ringbuffer.
Call intel_lr_context_reset() for each context in i915_gem_context_reset() when
in execlists mode.
Testcase: igt/pm_rps --run-subtest reset #bdw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Flatten control flow in the lrc reset code a notch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When one EU is disabled in a particular subslice, we can tune how the
work is spread between subslices to improve EU utilization.
v2: - Use a bitfield to record which subslice(s) has(have) 7 EUs. That
will also make the machinery work if several sublices have 7 EUs.
(Jeff Mcgee)
- Only apply the different hashing algorithm if the slice is
effectively unbalanced by checking there's a single subslice with
7 EUs. (Jeff Mcgee)
v3: Fix typo in comment (Jeff Mcgee)
Issue: VIZ-3845
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Reviewed-by: Jeff Mcgee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the current code we just reallocate the compressed FB at every
FBC update: we have X in one frame, then in the other frame we need X
again, but we check "needed < have" instead of "needed <= have".
v2: Rebase after Jani addressed the other problems described in v1.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So allow it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So add code to consider this case.
v2: Reorder the series, so drop the possible_framebuffer_bits chunk.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I want to make this code a little more complicated, so let's extract
the function first.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On Gen9 the render power gating can leave slice/subslice/EU in
a partially enabled state. We must make an explicit request for
full SSEU enablement through the Render Power Clock State
register when resuming render work. This register is save/
restored in the logical ring context image for execlist
submission mode. Initialize its value in each LRC image to
request full enablement according to the device SSEU config.
Thanks to Sharma Ankitprasad and Akash Goel for highlighting the
issue and proposing the initial fix on which this patch is based.
v2: Adjusted the names of the power gating support flags to fit
update of an earlier patch.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: "Akash Goel <akash.goel@intel.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a new section to the 'i915_sseu_status' debugfs entry to
report the currently enabled counts of slice, subslice, and
execution units on the device. The count of enabled subslice
per slice represents the most enabled subslice on any one
slice for devices where imbalances may exist. Similarly, the
count of enabled EU per subslice represents the most enabled
EU on any one subslice.
Collect this device status for Skylake by reading the Gen9
power gate control ack message registers. Power gate control
operates on EU in pairs, therefore our reported counts of
enabled EU can be overestimated by one for each pair in which
one EU is fused-off.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.
v2: Several small clean-ups suggested by Damien. Most notably,
used smaller types for the new device info fields to reduce
memory usage and improved the clarity/readability of the
method used to extract attribute values from the fuse
registers.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit eb10d63555 ("imx-drm: encoder prepare/mode_set must use adjusted mode")
broke the first LVDS modeset by using crtc->hwmode before crtc mode_set is
called. In fact, encoder prepare is not supposed to prepare the display clock
at all. Rather encoder mode_set should be used to set the DI clock rate, before
it is enabled by crtc commit.
Reported-by: Liu Ying <Ying.Liu@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The loop iterating over curr_ctrl in dw_hdmi terminates on mpixelclock == ~0UL,
so there needs to be an end of list element here in case a mode with a pixel
clock larger than 216 MHz is set.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch limits the pixel clock to 13.4 MHz - 266 MHz for i.MX6Q
and 13.5 MHz - 270 MHz for i.MX6DL, which is the range documented
in the HDMI Transmitter chapter of the respective reference manuals.
Without this patch, when connected to a monitor capable of 2160p60
modes, dw_hdmi will happily report this mode and the IPU code will
cause a division by zero in ipu_di_config_clock when trying to figure
out how to divide the 264 MHz HSP clock down to ~600 MHz.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Even if an unsupported mode with a pixel clock larger than two times the
264 MHz IPU HSP clock is set, don't divide by zero.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added new PHY register definitions to control TDC buffer calibration and
digital lock threshold.
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, the command parser tries to create a secondary batch exactly
as large as the original, and vmap both. This is open to abuse by
userspace using extremely large batch objects, but only executing very
short batches. For example, this would be if userspace were to implement
a command submission ringbuffer. However, we only need to allocate pages
for just the contents of the command sequence in the batch - all
relocations copied to the secondary batch will reference the original
batch and so there can be no access to the secondary batch outside of
the explicit execution region.
Testcase: igt/gem_exec_big #ivb,byt,hsw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When querying the GTFIFOCTL register to check the FIFO space, the read value
must be masked. The operation is repeated explicitly in several places. This
change refactors the read-and-mask code into a function call.
v2: rebased on top of Mika's forcewake patch set, specifically:
[PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers
Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
skylake_update_primary_plane() did not handle all pixel formats returned
by skl_format_to_fourcc(). Handle alpha similar to skl_update_plane().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89052
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The argument contains a pointer to the old state, rename it to old_state
like in all other commit helper functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This way drivers fully converted to atomic don't need to update these
legacy state variables in their modeset code any more.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Atomic state handling adds a lot of indirection and complexity between
simple updates and drivers. For easier debugging the diagnostic output
is therefore rather chatty. Which is great for tracking down atomic
issues, but really annoying otherwise.
Add a new DRM_DEBUG_ATOMIC to be able to filter this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The kerneldoc blocks for the drm_atomic_helper_*_set_property()
functions seem to have been copied from the plane disable handler
without being properly updated. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_crtc_vblank_get() is the new drm_vblank_get(), not the new
drm_vblank_off().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
KMS drivers are in full control of their irq and vblank handling, if
they get a vblank interrupt before drm_vblank_init or after
drm_vblank_cleanup that's just a driver bug.
For ums driver there's only r128 and radeon which support vblank, and
they call drm_vblank_init in their driver load functions. Which again
means that userspace can do whatever it wants with interrupt, vblank
structures will always be there.
So this should never happen, let's catch driver issues with a WARN_ON.
Motivated by some discussions with Imre.
v2: Use WARN_ON_ONCE as suggested by Imre.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The pipe might already have been shut down, and then it's not a good
idea to call hw accessor functions. Instead use the same logic as
drm_vblank_off which has all the necessary checks to avoid troubles or
inconsistency.
Noticed by Imre while reviewing my patches to remove some sanity
checks from ->get_vblank_counter.
v2: Try harder. disable_and_save can still access the vblank stuff
when vblank->enabled isn't set. It has to, since vlbank irq could be
disable but the pipe is still on when being called from
drm_vblank_off. But we still want to use that code for more code
sharing. So add a check for vblank->enabled on top - if that's not set
we shouldn't have anyone waiting for the vblank. If we have that's a
pretty serious bug.
The other issue that Imre spotted is drm_vblank_cleanup. That code
again calls disable_and_save and so suffers from the same issues. But
really drm_irq_uninstall should have cleaned that all up, so replace
the code with WARN_ON. Note that we can't delete the timer cleanup
since drivers aren't required to use drm_irq_install/uninstall, but
can do their own irq handling.
v3: Make it clear that all that gunk in drm_irq_uninstall is really
just bandaids for UMS races between the irq/vblank code. In UMS
userspace is in control of enabling/disabling interrupts in general
and vblanks specifically.
v4: Imre observed that KMS drivers all call drm_vblank_cleanup before
drm_irq_uninstall (as they should), so again the code in there is dead
for KMS (due to dev->num_crtcs == 0 after drm_vblank_cleanup). Or
should be, so only WARN for KMS - with UMS userspace could try to do
evil things.
v5: After more discussion on irc we've gone back to v3: the
del_timer_sync is required in all cases in drm_vblank_cleanup, but
let's restrict the WARN_ON to kms drivers only. Imre was also
concerned that bad things could happen without the disable_and_save
call. But we immediately free vblank structures afterwards which makes
the save useless. And drm_handle_vblank has a check for dev->num_crtcs
to avoid surprises with ums.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Where possible right now. Just a small step towards nirvana ...
v2: git add. Uggh. Noticed by Imre.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
UMS is no more!
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
With Ville's rework to use drm_crtc_vblank_on/off the core will take
care of rejecting drm_vblank_get calls when the pipe is off. Also the
core won't call the get_vblank_counter hooks in that case either. And
since we've dropped ums support recently we can now remove these
hacks, yay!
Noticed while trying to answer questions Laurent had about how the new
atomic helpers work.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.
Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
unitialized.
The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).
So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.
v2: Clarify the code flow slightly as suggested by Ville.
v3: Fix kerneldoc spelling, spotted by Laurent.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.
So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a
warning as BUG_ON() uses static variables when it is expanded.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a bug in the initialization of the pipelines. The
init_pipelines() function was called with a constant value of 0 in the
first_pipe argument. This is an error because amdkfd doesn't handle pipe 0.
The correct way is to pass the value that get_first_pipe() returns as the
argument for first_pipe.
This bug appeared in 3.19 (first version with amdkfd) and it causes around 15%
drop in CPU performance of Kaveri (A10-7850).
v2: Don't set get_first_pipe() as inline because it calls BUG_ON()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
The HLCDC IP provides a way to discard a specific area on the primary
plane (in case at least one of the overlay is activated and alpha
blending is disabled).
Doing this will reduce the amount of data to transfer from the main
memory to the Display Controller, and thus alleviate the load on the
memory bus (since this link is quite limited on such hardware,
this kind of optimization is really important).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Convert the HLCDC driver to atomic mode-setting.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The code in tegra_crtc_prepare() really belongs in tegra_dc_init(), or
at least most of it. This fixes an issue with VBLANK handling because
tegra_crtc_prepare() would overwrite the interrupt mask register that
tegra_crtc_enable_vblank() had written to to enable VBLANK interrupts.
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Store a pointer to the CRTC in its atomic state to make it easy for
state handling code to get at the CRTC.
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit eab3bbeffd ("drm/atomic: Add drm_crtc_state->active") added the
field to track the DPMS state. However, the Tegra driver was in modified
in parallel and subclasses the CRTC atomic state, so needed to duplicate
the code in the atomic helpers. After the addition of the active_changed
field it became out of sync and doesn't reset it when duplicating state.
This causes a full modeset on things like page-flips, which will in turn
cause warnings due to the VBLANK machinery being disabled when it really
should remain on.
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Recent changes in the clock framework have caused a behavioural change
in that clocks that have not had their rate set explicitly will now be
reset to their initial rate (or 0) when the clock is released. This is
triggered in the deferred probing path, resulting in the clock running
at a wrong frequency after the successful probe.
This can be easily fixed by setting the rate explicitly rather than by
relying on the implicit rate inherited by the parent.
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull drm updates from Dave Airlie:
"This is the main drm pull, it has a shared branch with some alsa
crossover but everything should be acked by relevant people.
New drivers:
- ATMEL HLCDC driver
- designware HDMI core support (used in multiple SoCs).
core:
- lots more atomic modesetting work, properties and atomic ioctl
(hidden under option)
- bridge rework allows support for Samsung exynos chromebooks to
work finally.
- some more panels supported
i915:
- atomic plane update support
- DSI uses shared DSI infrastructure
- Skylake basic support is all merged now
- component framework used for i915/snd-hda interactions
- write-combine cpu memory mappings
- engine init code refactored
- full ppgtt enabled where execlists are enabled.
- cherryview rps/gpu turbo and pipe CRC support.
radeon:
- indirect draw support for evergreen/cayman
- SMC and manual fan control for SI/CI
- Displayport audio support
amdkfd:
- SDMA usermode queue support
- replace suballocator usage with more suitable one
- rework for allowing interfacing to more than radeon
nouveau:
- major renaming in prep for later splitting work
- merge arm platform driver into nouveau
- GK20A reclocking support
msm:
- conversion to atomic modesetting
- YUV support for mdp4/5
- eDP support
- hw cursor for mdp5
tegra:
- conversion to atomic modesetting
- better suspend/resume support for child devices
rcar-du:
- interlaced support
imx:
- move to using dw_hdmi shared support
- mode_fixup support
sti:
- DVO support
- HDMI infoframe support
exynos:
- refactoring and cleanup, removed lots of internal unnecessary
abstraction
- exynos7 DECON display controller support
Along with the usual bunch of fixes, cleanups etc"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
drm/radeon: fix voltage setup on hawaii
drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
drm/radeon: only enable kv/kb dpm interrupts once v3
drm/radeon: workaround for CP HW bug on CIK
drm/radeon: Don't try to enable write-combining without PAT
drm/radeon: use 0-255 rather than 0-100 for pwm fan range
drm/i915: Clamp efficient frequency to valid range
drm/i915: Really ignore long HPD pulses on eDP
drm/exynos: Add DECON driver
drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
drm/i915: Insert a command barrier on BLT/BSD cache flushes
drm/i915: Drop vblank wait from intel_dp_link_down
drm/exynos: fix NULL pointer reference
drm/exynos: remove exynos_plane_dpms
drm/exynos: remove mode property of exynos crtc
drm/exynos: Remove exynos_plane_dpms() call with no effect
drm/i915: Squelch overzealous uncore reset WARN_ON
drm/i915: Take runtime pm reference on hangcheck_info
drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
...
two important bug fixes for radeon
* 'drm-next-3.20' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix voltage setup on hawaii
drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
Commit 03dae59c72 ("drm/i915: Ditch UMS config option") removed
CONFIG_DRM_I915_UMS from the Kconfig file, but i915_drv.c still
references this option in two #ifndef statements.
As an undefined config option will always be 'false', we can drop
the #ifndefs alltogether and adapt the printed error message.
This inconsistency was found with the undertaker tool.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
[danvet: Undo logging change as requested by Jani.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I have no idea how that crept in, but we need to do the write from the
ring and this is a masked register. Two fixes in 1!
Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's always a good idea to keep static analysis happy (also because it
prompts doing the check like I proposed :), this time smatch complains:
drivers/gpu/drm/i915/intel_ringbuffer.c:891 gen9_init_workarounds() warn:
always true condition '((->dev->pdev->revision) >= (0)) => (0-255 >= 0)'
That's because revision is a u8. Tweak a bit the condition then.
Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This W/A is put in a gen9 specific function because it may well be
needed on other gen9 platforms.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
