With commit a3a3c169dd ("icnss: Prevent power collapse during
driver probe/remove"), NULL pointer dereference happens in probe
because of recent changes in the function. Fix the issue by using
right pointer.
CRs-Fixed: 1061279
Change-Id: I464579953fabe1bd42ced50f0bbfdfd3cda0a492
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Some HW monitors can do a better job of the sampling and the threshold
checking than the SW implementation in the governor. Update the governor's
API to add support for them.
Change-Id: Id4b5593a5ed3290684ba43ebebe2466ba0b730b6
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
When Venus HW is not responding, before crashing the system,
print all the pending messages, current sessions and each
session info.
CRs-Fixed: 1059604
Change-Id: I8d39eaaa425e5e6fa97704c9bc15414f9a0f61ce
Signed-off-by: Praneeth Paladugu <ppaladug@codeaurora.org>
During power up operation check whether power up
failure is due to SSR or noise over slimbus.
If power up failure is due to SSR prevent retry
operation.
This change also do allocate DMA memory for slimbus
bulk trasactions. Memory should be DMA for slimbus
transactions as using non-DMA memory will end up
in creating bounce buffers and affect the performance.
Change-Id: Iaca520d92c4ee2d73f8e751699779e6cfc9ddb87
Signed-off-by: Dilip Kota <dkota@codeaurora.org>
1. Select COMMON_CLK_MSM for msmfalcon when building
for 32-bit.
2. Select RATIONAL when COMMON_CLK_MSM is selected as
it's using an api from rational library.
Change-Id: I5b8fa962718a5ae44dfd18a13285715580ee0dbc
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
'commit 34e4cf13f7 ("mmc: core: Update HS400 timing
mode before performing tuning")' updates timing mode
to HS400 before tuning in mmc_hs200_tuning.
On 4.4 kernel, there is check added to bail out from
execute_tuning if HS400 tuning is done in HS200 mode.
Adding check to avoid bailing out and allow
execute_tuning if POST_TUNING capability is set.
Change-Id: I259da28050e5da0c96251cb99176386927b596f0
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
As per the new schematic the debug uart is on BLSP1UART1
instead of BLSP2UART1.
Change-Id: I08b3ffa1a027b3212b77fe661348f2852485ed0d
Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org>
Current register default setting for MAD buffer interval is incorrect
and hence microphone activity detection is not functional. Update the
default value of the MAD buffer interval to 10msec.
CRs-Fixed: 1049012
Change-Id: I1dcdcb566f096bbddad286dc71c5bf980303e4c3
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
CVD version is updated to 2.3 on ADSP. Update the mapping
table in voice driver to allow CVD version 2.3 to be
recognized and used.
Change-Id: Id6d1c960dc720e8013eb9ba1f07af7662b576e37
CRs-Fixed: 1060201
Signed-off-by: Siena Richard <sienar@codeaurora.org>
With the recovery changes, if modem is brought down without FW
ready but WLAN driver is registered then shutdown call back is
called. This causes stability issue.
Make sure not call the shutdown call back if driver is not
registered. Also listening for PD notifications are enough even
for Subsystem restart so changing the quirks to take care of it.
CRs-fixed: 1061734
Change-Id: Ic5d1a38dfb6ea3e255424af135e2afbe47d1fc18
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Fix fcc max and step values per HW specification.
CRs-Fixed: 1060633
Change-Id: Ie4ff10977840d8210482ad6f7bba4f0f0160aa03
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Currently the PMI stat pin is configured to output IRQ and SW
override status. Parallel charging requires the stat pin for
parallel enable status and under the control of HW, and hence
the change.
CRs-Fixed: 1060633
Change-Id: Ie93f874b90b5aed0a66e97186e4f1d69a1275c8b
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Wait till all pending acks are receivied for active set messages
before lpm driver choose to enter rpm assisted pc.
Change-Id: Ifefb9f3ae88d890e64e7e123e0fcedc00aea719c
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Update wcd934x codec master clock configuration to
9.6MHz or 12.288MHz based on the device tree setting.
This is done during early codec initialization to prevent
artifacts when audio path is enabled.
CRs-fixed: 1061430
Change-Id: Ic983a524b6fa5bb079c6e61b8fe729974de78eea
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Add sysfs under sys/kernel/ts_info to access touch vendor name,
model number, firmware version.
Change-Id: I531c7fa7db2b7140e5b9c7bb31831d221c734e3e
Signed-off-by: Mao Li <maol@codeaurora.org>
remove psensor support as the linux/sensors.h file is not yet merged
in msm-3.18 kernel.
Change-Id: I6d46b35938b7420072f9245ffa27bb59f28d5e03
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Sensor HAL takes long time to scan /dev/input to get information
from input subsystem. Change sensors sysfs hierarchy to avoid
the scanning to reduce sensor HAL initialization time.
Change-Id: Ifcd560dacdba2600f2ae5d40a5c3e639ea291274
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Do not need to call function to enter pocket mode if the touch
panel is already in pocket mode as well as no need to call function
to leave pocket mode if it is not in pocket mode.
Change-Id: Ic26376bebeba8e7f0dd37ef3bfbbed36c621604b
Signed-off-by: Mao Li <maol@codeaurora.org>
Change dev_debug to dev_dbg to fix compiling error
if CONFIG_TOUCHSCREEN_FT5X06_PSENSOR is enabled.
Change-Id: Ic228ac8b6dec0bc3e1aaff890dc5b1b7c024bdfc
Signed-off-by: Mao Li <maol@codeaurora.org>
Once the input device is successfully registered via
input_register_device(), it has to be unregistered via
input_unregister_device(); input_free_device()
should not be called in this case. input_unregister_device()
frees the input device, hence the call to input_free_device()
is a double free. This is also described in comments of
input_unregister_device().
Reorganize the code to avoid a double free.
Change-Id: I7abee3f1ad6c73e1c38aa64e627ffd73f6f9d3b2
Signed-off-by: Mao Li <maol@codeaurora.org>
Focaltech touch controller FT6436 support new feature Screen-off-Gesture.
It is able to turn on the screen by drawing gestures on the touch screen
when the screen is during off status. Enable the FT CTP driver to support
the screen off gesture recognization.
This patch is propagated from msm-3.18 kernel.
'commit 5cc0bff80d65 ("input: ft5x06_ts: add gesture feature support")'
Also cleared the following checkpatch warnings.
- Missing a blank line after declarations
- Missing a blank line after declarations
- Comparisons should place the constant on the right side of the test.
Change-Id: I77d111d3ef800b636a337221d7e605f746a113dd
Signed-off-by: Mao Li <maol@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Fixed below irq flag issues of Focaltech CTP:
Focaltech CTP firmware generates edge interrupt to MSM, but the
interrupt type in DTSI is level, which will cause CTP interrupt
cannot wake up MSM when system is in deep sleep. Fix this by
setting edge irq flag in DTSI.
For GPIO irq, the irq flag should be specified in "interrupts"
node. Msm_gpio module will only use the lower 8-bit of
"interrupts" node and discards the upper bits. If we specify
0x2002 in "interrupts" node, the upper bits(0x2000) is not used
by msm_gpio, only lower bits(0x2) is used, that means only
lower bits(0x2) should be set in "interrupts" node.
"focaltech,irq-gpio" node is used to specify gpio property,
rather than irq flag. Remove the irq flag setting in this node.
In driver code, specify only "IRQF_ONESHOT". The irq trigger type
is specified by DTSI "interrupts" node. See above.
Change-Id: I4cd8596fb4538b701317f01a6cafaa771041ffdd
Signed-off-by: Mao Li <maol@codeaurora.org>
