Remove the incorrect Ainfo transfer to the sink during the
start of repeater test cases for the HDMI HDCP 1x module.
This causes incorrect results from sinks which are repeaters.
Fix the logic to disable software DDC before going into
part3 of HDCP 1x authentication.
Change-Id: Iddf1c5804162ecd3919a0d4fedc9102e3b1778ed
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Currently, deep color mode flags are not being cleared
across connect-disconnect of HDMI cable. This leads to
stale information being present on the next successful
connection.
Clear the stale deep color mode flags before updating the
modes during a connection event.
Change-Id: I90d494a67dfb1c3fd464f1e1ffb24592bd712702
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add debugfs entries for reading/writing WLAN hardware registers.
This is for runtime debugging enhancement.
Change-Id: If7a85181858e127187906beca69870a98f4a1184
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Enable ATL1C for ethernet driver, DEVMEM for debugging memory
mapped registers and PPS for the pulse per second driver.
Change-Id: I169a2f34b352008bd6c4d72111c53cdcdf16e566
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Force probing the sdhc1 bus even if it is not the boot device
by reading the device tree property qcom,force-sdhc1-probe.
Enables using the primary port for other use cases even when
the board is not using eMMC for boot.
Change-Id: I2a2b9d6a51037641720bdfd3107b2fadf385d7b5
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Check to see if the host is not NULL before trying to use
it, this avoids a crash when the driver is probed, but the
card is not available. Also remove dependency on ARCH_MSM
since it is not used anymore.
Change-Id: I476a512dd41e0c336b71c96d8dd2972cdadb8732
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add compatible flags for CAN controller and HSM chip to use them
with the spidev driver from user space.
Change-Id: I154c29b6c912cac2560333ef635aa4a542fd1985
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
ASM max active sessions increase to 9 to allow 8 interactive and
one primary stream concurrently.
CRs-Fixed: 2093120
Change-Id: I92a51dd1937634abb472fc06edbdd879b3d152d0
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Modularize the wcnss power up sequence like wcnss voltage
regulator enable/disable sequence and voltage regulator
current and voltage level parsing method. Remove hack code
from the power wcnss power process and enable/disable
the power resource if it's defined in the wcnss device node.
Update the debug logs to track the exact state of the power
state during device bootup. Remove the unnecessary logging
for the optional resource request fails during device bootup.
CRs-Fixed: 2086414
Change-Id: I30b1e2196eb9d1c933275f3db34ca0ff5664ea3b
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Added code changes to check ipa3_ctx initilized or not
during bootup in sdm670.
Change-Id: I03e5b8de30c77da140e9575c2315b0878cf5363c
Acked-by: Ashok Vuyyuru <avuyyuru@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
The WLAN host driver use device serial number to generate
MAC address. The wcnss platform driver export symbol for
WLAN host driver to read the device serial number to generate
the MAC address. Add updated SOC API to get the device serial
number in the wcnss platform driver.
CRs-Fixed: 2089225
Change-Id: Ic540f2e6e705131f18b59e8f139087d5d99024f6
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Add support to validate the result and error code
received from the WLAN firmware service.
CRs-fixed: 2095184
Change-Id: I454df58e293fbf2d99601d1c6820e67b5cae370c
Signed-off-by: Anurag Chouhan <achouhan@codeaurora.org>
Protecting operations performed during ois powerdown
from race condition by adding mutex locks.
CRs-Fixed: 2081806
Change-Id: I27a735fd69d3e98fdd2ed48456336c560b6f3adc
Signed-off-by: VijayaKumar T M <vtmuni@codeaurora.org>
In function parse_qos_dt_params, memory is allocated to arr32 but it
is never freed.
Free memory when exiting the function.
CRs-Fixed: 2093722
Change-Id: Ic1fc58c6685990e2865ef4033b54303d47311560
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
On 64bit platforms, the amount of memory allocated by ion can exceed
32 bits. Therefore the counters which track this information must be
64 bits as well.
Change-Id: I81daf2cec78de5787279daaf98264c5462ba6645
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
In case of no requirement of internal scratch buffers, driver
propagate error to upper layer leading to stream on failure.
This commit could avoid setting scratch buffers when there
is no requirement.
Change-Id: Iedcac8a54f2ae4136b6d885b3955927d4566d9db
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
Hide kernel pointers from unprivileged users by using %pK format-
specifier instead of %p. This respects the kptr_restrict sysctl
setting which is by default on. echo 0 to kptr_restrict to print
proper kernel addresses.
Change-Id: I6f14b039f2f193196edfce8160ae38341229085c
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
This patch addresses an issue in the GPU init sequence where
the clocks are turned on during the process but after the
init is complete the clocks are not turned off. Due to this,
the GPU clocks always have a refcount delta of 1 and never
get disabled later even when explicitly requested.
Change-Id: I40fa9a25cd86f5d39fbe6f6e3f83d6ab467d615f
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
After enabling the GPU clocks, the GPU can pagefault
when trying to access memory(example the ringbuffer).
This patch addresses the pagefault issue by enabling
the memory retention flags on the GPU core clock.
Change-Id: Ibabecba77501d6a3b188b19c90c172de7d667c8c
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
The status debug property lists all of the voters, their enable and
value status, and the effective result. Currently the status is
presented on multiple lines which is difficult to parse. Change the
format to be more parsable.
Print each voter in the following format:
VOTABLE: CLIENT: en=1 v=1000
Print a single summary line at the end in the following format:
VOTABLE: effective=EFFECTIVE_CLIENT type=VOTABLE_TYPE v=1000
Change-Id: I0671cdd8e0911450bafe4869cb49cc48bd622a81
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
To avoid leak info of pointers addresses to dmesg,
use %pK instead of %p to print virtual addresses.
Change-Id: I7d8e900d7cd62e9ad3fb9ea3ba9865d6911bdfcb
Acked-by: Chenna Kesava Raju <chennak@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
cnss_genl driver creates a netlink family and multicast groups
to facilitate communication between WLAN driver and userspace.
Define flag CONFIG_CNSS_GENL and set to 'y'(yes) to enable
compilation of the cnss_genl driver inorder to use the same.
Change-Id: I9d81f933e4fe3c9383f213c777d335e1fe51bdd2
Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
CRs-Fixed: 1117130
Fix pan control gain param to accommodate Q28 format.
Convert 32bit gain to be inlined with 16bit mixer coefficients
of ADSP.
Change-Id: I85ebd11c49b4af982f34091937acabb9e6580e8f
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Few PCIe clients does not have option to call for enumeration.
Update boot option for PCIe such that enumeration is done as
part of PCIe RC probe.
Change-Id: I1bb977b7e21c046ee7757ed509762897e2bcdd8d
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Correct FM on/off sequence with following changes ->
- FM slave port close is called after LPASS port close (remove hw_free)
- Use the watermark level of 8 for FM slave ports
- Do not reset the watermark to 0 upon port disable
Change-Id: Ie785715c2b92dae6b46b346bebd45e044f54ea53
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Add tp rev property to expose TP-REV information via
rev-id peripheral.
Change-Id: I0236f84947dbf256f090ea32895904024c1f3fcf
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Update scaling factor for RRADC USBIN current
based on USBIN voltage.
Change-Id: I87b2ac56166f2e0812ec56d88c68298094eb86ac
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Currently, there is a possibility of using already
freed memory while client reads from diag driver.
The patch adds proper protection to fix the issue.
CRs-Fixed: 2076623
Change-Id: Ic946865ac79f2684c06176be64fd2f3abc6048f7
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
