-----BEGIN PGP SIGNATURE-----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=NPlq
-----END PGP SIGNATURE-----
Merge 4.4.90 into android-4.4
Changes in 4.4.90
cifs: release auth_key.response for reconnect.
mac80211: flush hw_roc_start work before cancelling the ROC
KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce()
tracing: Fix trace_pipe behavior for instance traces
tracing: Erase irqsoff trace with empty write
md/raid5: fix a race condition in stripe batch
md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
crypto: talitos - Don't provide setkey for non hmac hashing algs.
crypto: talitos - fix sha224
KEYS: fix writing past end of user-supplied buffer in keyring_read()
KEYS: prevent creating a different user's keyrings
KEYS: prevent KEYCTL_READ on negative key
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
Fix SMB3.1.1 guest authentication to Samba
SMB: Validate negotiate (to protect against downgrade) even if signing off
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
vfs: Return -ENXIO for negative SEEK_HOLE / SEEK_DATA offsets
nl80211: check for the required netlink attributes presence
bsg-lib: don't free job in bsg_prepare_job
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
arm64: Make sure SPsel is always set
arm64: fault: Route pte translation faults via do_translation_fault
KVM: VMX: Do not BUG() on out-of-bounds guest IRQ
kvm: nVMX: Don't allow L2 to access the hardware CR8
PCI: Fix race condition with driver_override
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
x86/fpu: Don't let userspace set bogus xcomp_bv
gfs2: Fix debugfs glocks dump
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
KVM: VMX: do not change SN bit in vmx_update_pi_irte()
KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interrupt
cxl: Fix driver use count
dmaengine: mmp-pdma: add number of requestors
ARM: pxa: add the number of DMA requestor lines
ARM: pxa: fix the number of DMA requestor lines
KVM: VMX: use cmpxchg64
video: fbdev: aty: do not leak uninitialized padding in clk to userspace
swiotlb-xen: implement xen_swiotlb_dma_mmap callback
fix xen_swiotlb_dma_mmap prototype
Linux 4.4.90
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 72b195cb716284217e8b270af420bc7e5cf04b3c upstream.
Declare the number of DMA requestor lines per platform :
- for pxa25x: 40 requestor lines
- for pxa27x: 75 requestor lines
- for pxa3xx: 100 requestor lines
This information will be used to activate the DMA flow control or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=pHqB
-----END PGP SIGNATURE-----
Merge 4.4.81 into android-4.4
Changes in 4.4.81
libata: array underflow in ata_find_dev()
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
ALSA: hda - Fix speaker output from VAIO VPCL14M1R
ASoC: do not close shared backend dailink
KVM: async_pf: make rcu irq exit if not triggered from idle task
mm/page_alloc: Remove kernel address exposure in free_reserved_area()
ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
ext4: fix overflow caused by missing cast in ext4_resize_fs()
ARM: dts: armada-38x: Fix irq type for pca955
media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
target: Avoid mappedlun symlink creation during lun shutdown
iscsi-target: Always wait for kthread_should_stop() before kthread exit
iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
iscsi-target: Fix initial login PDU asynchronous socket close OOPs
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
iser-target: Avoid isert_conn->cm_id dereference in isert_login_recv_done
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries
media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
f2fs: sanity check checkpoint segno and blkoff
drm: rcar-du: fix backport bug
saa7164: fix double fetch PCIe access condition
ipv4: ipv6: initialize treq->txhash in cookie_v[46]_check()
net: Zero terminate ifr_name in dev_ifname().
ipv6: avoid overflow of offset in ip6_find_1stfragopt
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
mcs7780: Fix initialization when CONFIG_VMAP_STACK is enabled
openvswitch: fix potential out of bound access in parse_ct
packet: fix use-after-free in prb_retire_rx_blk_timer_expired()
ipv6: Don't increase IPSTATS_MIB_FRAGFAILS twice in ip6_fragment()
net: ethernet: nb8800: Handle all 4 RGMII modes identically
dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly
dccp: fix a memleak that dccp_ipv4 doesn't put reqsk properly
dccp: fix a memleak for dccp_feat_init err process
sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()
sctp: fix the check for _sctp_walk_params and _sctp_walk_errors
net/mlx5: Fix command bad flow on command entry allocation failure
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
net: phy: Fix PHY unbind crash
xen-netback: correctly schedule rate-limited queues
sparc64: Measure receiver forward progress to avoid send mondo timeout
wext: handle NULL extra data in iwe_stream_add_point better
sh_eth: R8A7740 supports packet shecksumming
net: phy: dp83867: fix irq generation
tg3: Fix race condition in tg3_get_stats64().
x86/boot: Add missing declaration of string functions
phy state machine: failsafe leave invalid RUNNING state
scsi: qla2xxx: Get mutex lock before checking optrom_state
drm/virtio: fix framebuffer sparse warning
virtio_blk: fix panic in initialization error path
ARM: 8632/1: ftrace: fix syscall name matching
mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER
lib/Kconfig.debug: fix frv build failure
signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
mm: don't dereference struct page fields of invalid pages
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
net: account for current skb length when deciding about UFO
workqueue: implicit ordered attribute should be overridable
Linux 4.4.81
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 8d4514173211586c6238629b1ef1e071927735f5 upstream.
As written in the datasheet the PCA955 can only handle low level irq and
not edge irq.
Without this fix the interrupt is not usable for pca955: the gpio-pca953x
driver already set the irq type as low level which is incompatible with
edge type, then the kernel prevents using the interrupt:
"irq: type mismatch, failed to map hwirq-18 for
/soc/internal-regs/gpio@18100!"
Fixes: 928413bd85 ("ARM: mvebu: Add Armada 388 General Purpose
Development Board support")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAlmHzogACgkQONu9yGCS
aT72Kg/9Ea02hrf7SCaEmReH0CNBsZiWBp0u/4b6QtXt3TrPDXK0oteIB4SUIVi/
zOzjU5SkssMLL9RoRQob81DLFJlL0b9ME5nLXxAACe2P74DaRSxA3DDmrYILgerH
Gnv4k9xjbVMXMjdk6qAZ/SahCFfYPfnPCRO/zPeb3+6EZk8UQpaaB/GNxVCsGFTZ
AfThsAHYzfFOg2fYdK0T09eDtAFqAokwGY6O8uaigkJt3u5mbMXcgxSp4o322OcG
V3jxCUPzSk/78QtoSqQErXDCj/30451oLVByMBuRpBJAilsDf6VaURuz1dVfKFW8
PdkLiy397sir696HwPU0HwHz++kRnZK2u2z//TRDE5wmgsC9VSq9fkggZdmNBol5
N4ekCWjhYyyJzxf9hTxK/fA4t4KRFtOcdRiEkJj9RDIhT9jxsxPMr3TGJ25LJaUH
8Qae+nNlYVe7lmaojckGa+AjIMm5HRB7LZnf4VQr1E8kvWpWpwA/0YtnduzPsXhH
6xqT0rL/1/Z1Jz63/zPAtZ9OSL/ne0hJs+xOuUhKHGwH3oWBKrgmxAH8CAxYq0x9
Y6ALkDweS3e+vVt+4BcHpUz8JTNTlspMcebt4VvjqvmERpKwmVsl7tEY242Uw4LQ
wMF50vA9Cc0bVkVS7w2Ns/dn6XEWYpqS4a/MninjaBOMbtMia78=
=l+tE
-----END PGP SIGNATURE-----
Merge 4.4.80 into android-4.4
Changes in 4.4.80
af_key: Add lock to key dump
pstore: Make spinlock per zone instead of global
net: reduce skb_warn_bad_offload() noise
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
crypto: authencesn - Fix digest_null crash
md/raid5: add thread_group worker async_tx_issue_pending_all
drm/vmwgfx: Fix gcc-7.1.1 warning
drm/nouveau/bar/gf100: fix access to upper half of BAR2
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Reload HTM registers explicitly
KVM: PPC: Book3S HV: Save/restore host values of debug registers
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
Staging: comedi: comedi_fops: Avoid orphaned proc entry
drm/rcar: Nuke preclose hook
drm: rcar-du: Perform initialization/cleanup at probe/remove time
drm: rcar-du: Simplify and fix probe error handling
perf intel-pt: Fix ip compression
perf intel-pt: Fix last_ip usage
perf intel-pt: Use FUP always when scanning for an IP
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
xfs: don't BUG() on mixed direct and mapped I/O
nfc: fdp: fix NULL pointer dereference
net: phy: Do not perform software reset for Generic PHY
isdn: Fix a sleep-in-atomic bug
isdn/i4l: fix buffer overflow
ath10k: fix null deref on wmi-tlv when trying spectral scan
wil6210: fix deadlock when using fw_no_recovery option
mailbox: always wait in mbox_send_message for blocking Tx mode
mailbox: skip complete wait event if timer expired
mailbox: handle empty message in tx_tick
mpt3sas: Don't overreach ioc->reply_post[] during initialization
kaweth: fix firmware download
kaweth: fix oops upon failed memory allocation
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
RDMA/uverbs: Fix the check for port number
libnvdimm, btt: fix btt_rw_page not returning errors
ipmi/watchdog: fix watchdog timeout set on reboot
dentry name snapshots
v4l: s5c73m3: fix negation operator
Make file credentials available to the seqfile interfaces
/proc/iomem: only expose physical resource addresses to privileged users
vlan: Propagate MAC address to VLANs
pstore: Allow prz to control need for locking
pstore: Correctly initialize spinlock and flags
pstore: Use dynamic spinlock initializer
net: skb_needs_check() accepts CHECKSUM_NONE for tx
sched/cputime: Fix prev steal time accouting during CPU hotplug
xen/blkback: don't free be structure too early
xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
tpm: fix a kernel memory leak in tpm-sysfs.c
tpm: Replace device number bitmap with IDR
x86/mce/AMD: Make the init code more robust
r8169: add support for RTL8168 series add-on card.
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
net/mlx4: Remove BUG_ON from ICM allocation routine
drm/msm: Ensure that the hardware write pointer is valid
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
irqchip/keystone: Fix "scheduling while atomic" on rt
ASoC: tlv320aic3x: Mark the RESET register as volatile
spi: dw: Make debugfs name unique between instances
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
openrisc: Add _text symbol to fix ksym build error
dmaengine: ioatdma: Add Skylake PCI Dev ID
dmaengine: ioatdma: workaround SKX ioatdma version
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
ARM64: zynqmp: Fix i2c node's compatible string
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
usb: gadget: Fix copy/pasted error message
Btrfs: adjust outstanding_extents counter properly when dio write is split
tools lib traceevent: Fix prev/next_prio for deadline tasks
xfrm: Don't use sk_family for socket policy lookups
perf tools: Install tools/lib/traceevent plugins with install-bin
perf symbols: Robustify reading of build-id from sysfs
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
vfio-pci: Handle error from pci_iomap
arm64: mm: fix show_pte KERN_CONT fallout
nvmem: imx-ocotp: Fix wrong register size
sh_eth: enable RX descriptor word 0 shift on SH7734
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
HID: ignore Petzl USB headlamp
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: snic: Return error code on memory allocation failure
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
Linux 4.4.80
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 4cf48f1d7520a4d325af58eded4d8090e1b40be7 ]
Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of
qemu. eMMC itself is not detected and is not working.
Real Nokia N900 harware does not have this problem. As eMMC is really not
SDIO or SD based such change is harmless and will fix support for qemu.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=bwNU
-----END PGP SIGNATURE-----
Merge 4.4.76 into android-4.4
Changes in 4.4.76
ipv6: release dst on error in ip6_dst_lookup_tail
net: don't call strlen on non-terminated string in dev_set_alias()
decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb
net: Zero ifla_vf_info in rtnl_fill_vfinfo()
af_unix: Add sockaddr length checks before accessing sa_family in bind and connect handlers
Fix an intermittent pr_emerg warning about lo becoming free.
net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx
igmp: acquire pmc lock for ip_mc_clear_src()
igmp: add a missing spin_lock_init()
ipv6: fix calling in6_ifa_hold incorrectly for dad work
net/mlx5: Wait for FW readiness before initializing command interface
decnet: always not take dst->__refcnt when inserting dst into hash table
net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
sfc: provide dummy definitions of vswitch functions
ipv6: Do not leak throw route references
rtnetlink: add IFLA_GROUP to ifla_policy
netfilter: xt_TCPMSS: add more sanity tests on tcph->doff
netfilter: synproxy: fix conntrackd interaction
NFSv4: fix a reference leak caused WARNING messages
drm/ast: Handle configuration without P2A bridge
mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
MIPS: Avoid accidental raw backtrace
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: Fix IRQ tracing & lockdep when rescheduling
ALSA: hda - Fix endless loop of codec configure
ALSA: hda - set input_path bitmap to zero after moving it to new place
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
usb: gadget: f_fs: Fix possibe deadlock
sysctl: enable strict writes
block: fix module reference leak on put_disk() call for cgroups throttle
mm: numa: avoid waiting on freed migrated pages
KVM: x86: fix fixing of hypercalls
scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type
scsi: lpfc: Set elsiocb contexts to NULL after freeing it
qla2xxx: Fix erroneous invalid handle message
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
net: mvneta: Fix for_each_present_cpu usage
MIPS: ath79: fix regression in PCI window initialization
net: korina: Fix NAPI versus resources freeing
MIPS: ralink: MT7688 pinmux fixes
MIPS: ralink: fix USB frequency scaling
MIPS: ralink: Fix invalid assignment of SoC type
MIPS: ralink: fix MT7628 pinmux typos
MIPS: ralink: fix MT7628 wled_an pinmux gpio
mtd: bcm47xxpart: limit scanned flash area on BCM47XX (MIPS) only
bgmac: fix a missing check for build_skb
mtd: bcm47xxpart: don't fail because of bit-flips
bgmac: Fix reversed test of build_skb() return value.
net: bgmac: Fix SOF bit checking
net: bgmac: Start transmit queue in bgmac_open
net: bgmac: Remove superflous netif_carrier_on()
powerpc/eeh: Enable IO path on permanent error
gianfar: Do not reuse pages from emergency reserve
Btrfs: fix truncate down when no_holes feature is enabled
virtio_console: fix a crash in config_work_handler
swiotlb-xen: update dev_addr after swapping pages
xen-netfront: Fix Rx stall during network stress and OOM
scsi: virtio_scsi: Reject commands when virtqueue is broken
platform/x86: ideapad-laptop: handle ACPI event 1
amd-xgbe: Check xgbe_init() return code
net: dsa: Check return value of phy_connect_direct()
drm/amdgpu: check ring being ready before using
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
virtio_net: fix PAGE_SIZE > 64k
vxlan: do not age static remote mac entries
ibmveth: Add a proper check for the availability of the checksum features
kernel/panic.c: add missing \n
HID: i2c-hid: Add sleep between POWER ON and RESET
scsi: lpfc: avoid double free of resource identifiers
spi: davinci: use dma_mapping_error()
mac80211: initialize SMPS field in HT capabilities
x86/mpx: Use compatible types in comparison to fix sparse error
coredump: Ensure proper size of sparse core files
swiotlb: ensure that page-sized mappings are page-aligned
s390/ctl_reg: make __ctl_load a full memory barrier
be2net: fix status check in be_cmd_pmac_add()
perf probe: Fix to show correct locations for events on modules
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
sctp: check af before verify address in sctp_addr_id2transport
ravb: Fix use-after-free on `ifconfig eth0 down`
jump label: fix passing kbuild_cflags when checking for asm goto support
xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY
xfrm: NULL dereference on allocation failure
xfrm: Oops on error in pfkey_msg2xfrm_state()
watchdog: bcm281xx: Fix use of uninitialized spinlock.
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
ARM: 8685/1: ensure memblock-limit is pmd-aligned
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
x86/mm: Fix flush_tlb_page() on Xen
ocfs2: o2hb: revert hb threshold to keep compatible
iommu/vt-d: Don't over-free page table directories
iommu: Handle default domain attach failure
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
cpufreq: s3c2416: double free on driver init error path
KVM: x86: fix emulation of RSM and IRET instructions
KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()
KVM: x86: zero base3 of unusable segments
KVM: nVMX: Fix exception injection
Linux 4.4.76
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 0c2bf9f95983fe30aa2f6463cb761cd42c2d521a upstream.
GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[ 0.000000] GIC: PPI11 is secure or misconfigured
Changing them to being edge triggered corrects the issue
Suggested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[AmitP: Resolved minor cherry-pick conflict]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=Ic1J
-----END PGP SIGNATURE-----
Merge 4.4.73 into android-4.4
Changes in 4.4.73
s390/vmem: fix identity mapping
partitions/msdos: FreeBSD UFS2 file systems are not recognized
ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.
Call echo service immediately after socket reconnect
net: xilinx_emaclite: fix freezes due to unordered I/O
net: xilinx_emaclite: fix receive buffer overflow
ipv6: Handle IPv4-mapped src to in6addr_any dst.
ipv6: Inhibit IPv4-mapped src address on the wire.
NET: Fix /proc/net/arp for AX.25
NET: mkiss: Fix panic
net: hns: Fix the device being used for dma mapping during TX
sierra_net: Skip validating irrelevant fields for IDLE LSIs
sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
i2c: piix4: Fix request_region size
ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches
PM / runtime: Avoid false-positive warnings from might_sleep_if()
jump label: pass kbuild_cflags when checking for asm goto support
kasan: respect /proc/sys/kernel/traceoff_on_warning
log2: make order_base_2() behave correctly on const input value zero
ethtool: do not vzalloc(0) on registers dump
fscache: Fix dead object requeue
fscache: Clear outstanding writes when disabling a cookie
FS-Cache: Initialise stores_lock in netfs cookie
ipv6: fix flow labels when the traffic class is non-0
drm/nouveau: prevent userspace from deleting client object
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
net/mlx4_core: Avoid command timeouts during VF driver device shutdown
gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
net: adaptec: starfire: add checks for dma mapping errors
parisc, parport_gsc: Fixes for printk continuation lines
drm/nouveau: Don't enabling polling twice on runtime resume
drm/ast: Fixed system hanged if disable P2A
ravb: unmap descriptors when freeing rings
nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
r8152: re-schedule napi for tx
r8152: fix rtl8152_post_reset function
r8152: avoid start_xmit to schedule napi when napi is disabled
sctp: sctp_addr_id2transport should verify the addr before looking up assoc
romfs: use different way to generate fsid for BLOCK or MTD
proc: add a schedule point in proc_pid_readdir()
tipc: ignore requests when the connection state is not CONNECTED
xtensa: don't use linux IRQ #0
s390/kvm: do not rely on the ILC on kvm host protection fauls
sparc64: make string buffers large enough
Linux 4.4.73
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 46350b71a09ccf3573649e03db55d4b61d5da231 upstream.
Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015):
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf
states the following:
"LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation
up to 396 MHz."
So fix the entry by adding the 25mV margin value as done in the other
entries of the table, which results in 1.15V for 396MHz operation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Stephane Fillod <f8cfe@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=Z1no
-----END PGP SIGNATURE-----
Merge 4.4.70 into android-4.4
Changes in 4.4.70
usb: misc: legousbtower: Fix buffers on stack
usb: misc: legousbtower: Fix memory leak
USB: ene_usb6250: fix DMA to the stack
watchdog: pcwd_usb: fix NULL-deref at probe
char: lp: fix possible integer overflow in lp_setup()
USB: core: replace %p with %pK
ARM: tegra: paz00: Mark panel regulator as enabled on boot
tpm_crb: check for bad response size
infiniband: call ipv6 route lookup via the stub interface
dm btree: fix for dm_btree_find_lowest_key()
dm raid: select the Kconfig option CONFIG_MD_RAID0
dm bufio: avoid a possible ABBA deadlock
dm bufio: check new buffer allocation watermark every 30 seconds
dm cache metadata: fail operations if fail_io mode has been established
dm bufio: make the parameter "retain_bytes" unsigned long
dm thin metadata: call precommit before saving the roots
dm space map disk: fix some book keeping in the disk space map
md: update slab_cache before releasing new stripes when stripes resizing
rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
mwifiex: pcie: fix cmd_buf use-after-free in remove/reset
ima: accept previously set IMA_NEW_FILE
KVM: x86: Fix load damaged SSEx MXCSR register
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
regulator: tps65023: Fix inverted core enable logic.
s390/kdump: Add final note
s390/cputime: fix incorrect system time
ath9k_htc: Add support of AirTies 1eda:2315 AR9271 device
ath9k_htc: fix NULL-deref at probe
drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.
drm/amdgpu: Make display watermark calculations more accurate
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: handle races with hw when updating the next alarm time
cdc-acm: fix possible invalid access when processing notification
proc: Fix unbalanced hard link numbers
of: fix sparse warning in of_pci_range_parser_one
iio: dac: ad7303: fix channel description
pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()
USB: serial: ftdi_sio: fix setting latency for unprivileged users
USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4 crypto: fix some error handling
net: qmi_wwan: Add SIMCom 7230E
fscrypt: fix context consistency check when key(s) unavailable
f2fs: check entire encrypted bigname when finding a dentry
fscrypt: avoid collisions when presenting long encrypted filenames
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
sched/fair: Initialize throttle_count for new task-groups lazily
usb: host: xhci-plat: propagate return value of platform_get_irq()
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
net: irda: irda-usb: fix firmware name on big-endian hosts
usbvision: fix NULL-deref at probe
mceusb: fix NULL-deref at probe
ttusb2: limit messages to buffer size
usb: musb: tusb6010_omap: Do not reset the other direction's packet size
USB: iowarrior: fix info ioctl on big-endian hosts
usb: serial: option: add Telit ME910 support
USB: serial: qcserial: add more Lenovo EM74xx device IDs
USB: serial: mct_u232: fix big-endian baud-rate handling
USB: serial: io_ti: fix div-by-zero in set_termios
USB: hub: fix SS hub-descriptor handling
USB: hub: fix non-SS hub-descriptor handling
ipx: call ipxitf_put() in ioctl error path
iio: proximity: as3935: fix as3935_write
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
gspca: konica: add missing endpoint sanity check
s5p-mfc: Fix unbalanced call to clock management
dib0700: fix NULL-deref at probe
zr364xx: enforce minimum size when reading header
dvb-frontends/cxd2841er: define symbol_rate_min/max in T/C fe-ops
cx231xx-audio: fix init error path
cx231xx-audio: fix NULL-deref at probe
cx231xx-cards: fix NULL-deref at probe
powerpc/book3s/mce: Move add_taint() later in virtual mode
powerpc/pseries: Fix of_node_put() underflow during DLPAR remove
powerpc/64e: Fix hang when debugging programs with relocated kernel
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
arm64: xchg: hazard against entire exchange variable
arm64: uaccess: ensure extension of access_ok() addr
arm64: documentation: document tagged pointer stack constraints
xc2028: Fix use-after-free bug properly
mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp
staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
metag/uaccess: Fix access_ok()
metag/uaccess: Check access_ok in strncpy_from_user
uwb: fix device quirk on big-endian hosts
genirq: Fix chained interrupt data ordering
osf_wait4(): fix infoleak
tracing/kprobes: Enforce kprobes teardown after testing
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
PCI: Freeze PME scan before suspending devices
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
nfsd: encoders mustn't use unitialized values in error cases
drivers: char: mem: Check for address space wraparound with mmap()
Linux 4.4.70
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit d3df1ec06353e51fc44563d2e7e18d42811af290 upstream.
Remove ADC channels that are not available by default on the sama5d3_xplained
board (resistor not populated) in order to not create confusion.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cdd31e5913c1f86dce7e201b086155b3f24896b upstream.
The voltage reference for the ADC is not 3V but 3.3V since it is connected to
VDDANA.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=TI1/
-----END PGP SIGNATURE-----
Merge 4.4.48 into android-4.4
Changes in 4.4.48:
net/openvswitch: Set the ipv6 source tunnel key address attribute correctly
net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled
net: properly release sk_frag.page
amd-xgbe: Fix jumbo MTU processing on newer hardware
net: unix: properly re-increment inflight counter of GC discarded candidates
net/mlx5: Increase number of max QPs in default profile
net/mlx5e: Count LRO packets correctly
net: bcmgenet: remove bcmgenet_internal_phy_setup()
ipv4: provide stronger user input validation in nl_fib_input()
socket, bpf: fix sk_filter use after free in sk_clone_lock
tcp: initialize icsk_ack.lrcvtime at session start time
Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Input: iforce - validate number of endpoints before using them
Input: ims-pcu - validate number of endpoints before using them
Input: hanwang - validate number of endpoints before using them
Input: yealink - validate number of endpoints before using them
Input: cm109 - validate number of endpoints before using them
Input: kbtab - validate number of endpoints before using them
Input: sur40 - validate number of endpoints before using them
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
ALSA: hda - Adding a group of pin definition to fix headset problem
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
USB: serial: qcserial: add Dell DW5811e
ACM gadget: fix endianness in notifications
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
USB: uss720: fix NULL-deref at probe
USB: lvtest: fix NULL-deref at probe
USB: idmouse: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb: hub: Fix crash after failure to read BOS descriptor
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
mmc: ushc: fix NULL-deref at probe
iio: adc: ti_am335x_adc: fix fifo overrun recovery
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
parport: fix attempt to write duplicate procfiles
ext4: mark inode dirty after converting inline directory
mmc: sdhci: Do not disable interrupts while waiting for clock
xen/acpi: upload PM state from init-domain to Xen
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
ARM: dts: at91: sama5d2: add dma properties to UART nodes
cpufreq: Restore policy min/max limits on CPU online
raid10: increment write counter after bio is split
libceph: don't set weight to IN when OSD is destroyed
xfs: don't allow di_size with high bit set
xfs: fix up xfs_swap_extent_forks inline extent handling
nl80211: fix dumpit error path RTNL deadlocks
USB: usbtmc: add missing endpoint sanity check
xfs: clear _XBF_PAGES from buffers when readahead page
xen: do not re-use pirq number cached in pci device msi msg data
igb: Workaround for igb i210 firmware issue
igb: add i211 to i210 PHY workaround
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
PCI: Separate VF BAR updates from standard BAR updates
PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
PCI: Add comments about ROM BAR updating
PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
PCI: Don't update VF BARs while VF memory space is enabled
PCI: Update BARs using property bits appropriate for type
PCI: Ignore BAR updates on virtual functions
PCI: Do any VF BAR updates before enabling the BARs
vfio/spapr: Postpone allocation of userspace version of TCE table
block: allow WRITE_SAME commands with the SG_IO ioctl
s390/zcrypt: Introduce CEX6 toleration
uvcvideo: uvc_scan_fallback() for webcams with broken chain
ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520
ACPI / blacklist: Make Dell Latitude 3350 ethernet work
serial: 8250_pci: Detach low-level driver during PCI error recovery
fbcon: Fix vc attr at deinit
crypto: algif_hash - avoid zero-sized array
Linux 4.4.58
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b1708b72a0959a032cd2eebb77fa9086ea3e0c84 upstream.
The dmas/dma-names properties are added to the UART nodes. Note that additional
properties are needed to enable them at the board level: check bindings for
details.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78162d48466d23c45a784034630c5928af631e3d upstream.
Enable DMA on uart1 to get a more reliable console.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef8d02d4a2c36f7a93e74c95a9c419353b310117 upstream.
Enable DMA on usart3 to get a more reliable console. This is especially
useful for automation and kernelci were a kernel with PROVE_LOCKING enabled
is quite susceptible to character loss, resulting in tests failure.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab5c2b662e2dcbb964099bf7f19e9dbc9ae5a41 upstream.
This patch fixes the following error:
sgtl5000 0-000a: Error reading chip id -6
imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered
imx-sgtl5000 sound: snd_soc_register_card failed (-517)
The problem was that the pinctrl group was linked to the sound driver
instead of the codec node. Since the codec is probed first, the sys_mclk
was missing and it would therefore fail to initialize.
Fixes: b32e700256 ("ARM: dts: imx: add Boundary Devices Nitrogen6_Max board")
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43849785e1079f6606a31cb7fda92d1200849728 upstream.
Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.
This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
commit af92305e567b7f4c9cf48b9e46c1f48ec9ffb1fb upstream.
On i.MX31 AVIC interrupt controller base address is at 0x68000000.
The problem was shadowed by the AVIC driver, which takes the correct
base address from a SoC specific header file.
Fixes: d2a37b3d91 ("ARM i.MX31: Add devicetree support")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f87aee6a2e55eda466a43ba6248a8b75eede153 upstream.
i.MX31 Clock Control Module controller is found on AIPS2 bus, move it
there from SPBA bus to avoid a conflict of device IO space mismatch.
Fixes: ef0e4a606f ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e575cbc930901718cc18e084566ecbb9a4b5ebb upstream.
The type of AVIC interrupt controller found on i.MX31 is one-cell,
namely 31 for CCM DVFS and 53 for CCM, however for clock control
module its interrupts are specified as 3-cells, fix it.
Fixes: ef0e4a606f ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc8ee9dbdba509fb58e23ba79f2e6059fe5d8b3b upstream.
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca88696e8b73a9fa2b1de445747e9235c3a7bd50 upstream.
The Qualcomm PMIC GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.
That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.
If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:
type mismatch, failed to map hwirq-NN for <FOO>!
Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.
To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.
Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.
Fixes: bce3604696 ("ARM: dts: apq8064: add pm8921 mpp support")
Fixes: 874443fe9e ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Björn Andersson <bjorn.andersson@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 061492cfad9f11dbc32df741a7164f307b69b6e6 upstream.
The armada-390.dtsi was broken since the first patch which adds Device Tree
files for Armada 39x SoC was introduced.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes 538da83 ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
commit 539d5c48a4aff5a4afcff117418618b49126c54c upstream.
Set cpu_alert0 temperature to 85°C instead of 850°C.
Fixes: 32a5d2d170 ("ARM: dts: sun5i: Add cpu thermal zones to dtsi")
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 153b58ea932b2d0642fa5cd41c93bb0555f3f09b upstream.
The gpmc ranges property for NAND at CS0 was being overridden by later
includes that defined gpmc ethernet nodes, effectively breaking NAND on
these systems:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
Instead of redefining the NAND range in every such dtsi, define all
currently used ranges in omap3-overo-base.dtsi.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e0568dfbfb8c13cdb69c9fd06d600593ad4b430 upstream.
The gpmc ranges property for NAND at CS0 has been broken since it was
first added.
This currently prevents the nand gpmc child node from being probed:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
and consequently the NAND device from being registered.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f065e9e4addd75c21bb976bb2558648bf4f61de6 upstream.
Commit 833f2cbf70 ("ARM: dts: imx6: change the core clock of spdif")
changed many more clocks than only the SPDIF core clock as stated in
the commit message.
The MLB clock has been added and this causes SPDIF regression as
reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240
The MX6Q Reference Manual does not mention that MLB is a clock related
to SPDIF, so change it back to a dummy clock to restore SPDIF
functionality.
Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131
Fixes: 833f2cbf70 ("ARM: dts: imx6: change the core clock of spdif")
Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a778937888867aac17a33887d1c429120790fbc2 upstream.
Commit 148c274ea6 ("ARM: kirkwood: ib62x0: add u-boot environment
partition") split the "u-boot" partition into "u-boot" and "u-boot
environment". However, instead of the size of the environment, an offset
was given, resulting in overlapping partitions.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Fixes: 148c274ea6 ("ARM: kirkwood: ib62x0: add u-boot environment partition")
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Luka Perkov <luka@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e9d2850a8db4e0d85a20bb692198bf2cc4be3b7 upstream.
The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs. If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:
[ 97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc51b632c7b047c25807023b76f3877aed19c770 upstream.
It seems that recent kernels have a shorter timeout when scanning for
ethernet phys causing us to hit a timeout on boards where the phy's
regulator gets enabled just before scanning, which leads to non working
ethernet.
A 10ms startup delay seems to be enough to fix it, this commit adds a
20ms startup delay just to be safe.
This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board,
both of which have non-working ethernet on recent kernels without this
fix.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 929e604efa3dc0522214e0dc18984be23993e9f0 upstream.
When the support for the Marvell crypto engine was added in the Device
Tree of the various Armada 385 Device Tree files in commit
d716f2e837 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x
boards"), a typo was made in the MBus window attributes for the Armada
385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit
fixes this typo, which makes the CESA engines operational on Armada 385
Linksys boards.
Reported-by: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: d716f2e837 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fc39d347267bd029fcc9099c70e2fe2d53130e9 upstream.
The sun4i-timer driver registers its sched_clock only if the machine is
compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or
"allwinner,sun4i-a10".
Add the missing "allwinner,sun5i-a13" string to the machine compatible.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: 465a225fb2 ("ARM: sun5i: Add C.H.I.P DTS")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9800917cf92f5b5fe5cae706cb70db8d014f663c upstream.
Some of the GPIO configs were wrong in the submitted DTS files,
this patch fixes all affected boards.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
commit aab0a4c83ceb344d2327194bf354820e50607af6 upstream.
The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.
This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07c6b2d01d351f0512ed7145625265e435ab3240 upstream.
Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.
Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.
Fixes: c943646d1f ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
